diff options
| -rw-r--r-- | drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 11 | ||||
| -rw-r--r-- | drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 57 | ||||
| -rw-r--r-- | drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 18 |
3 files changed, 78 insertions, 8 deletions
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 499fcf8875b4..8e119d78730b 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -137,6 +137,13 @@ struct st_lsm6dsx_odr_table_entry { int odr_len; }; +struct st_lsm6dsx_samples_to_discard { + struct { + u32 milli_hz; + u16 samples; + } val[ST_LSM6DSX_ODR_LIST_SIZE]; +}; + struct st_lsm6dsx_fs { u32 gain; u8 val; @@ -291,6 +298,7 @@ struct st_lsm6dsx_ext_dev_settings { * @irq_config: interrupts related registers. * @drdy_mask: register info for data-ready mask (addr + mask). * @odr_table: Hw sensors odr table (Hz + val). + * @samples_to_discard: Number of samples to discard for filters settling time. * @fs_table: Hw sensors gain table (gain + val). * @decimator: List of decimator register info (addr + mask). * @batch: List of FIFO batching register info (addr + mask). @@ -323,6 +331,7 @@ struct st_lsm6dsx_settings { } irq_config; struct st_lsm6dsx_reg drdy_mask; struct st_lsm6dsx_odr_table_entry odr_table[2]; + struct st_lsm6dsx_samples_to_discard samples_to_discard[2]; struct st_lsm6dsx_fs_table_entry fs_table[2]; struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID]; struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID]; @@ -353,6 +362,7 @@ enum st_lsm6dsx_fifo_mode { * @hw: Pointer to instance of struct st_lsm6dsx_hw. * @gain: Configured sensor sensitivity. * @odr: Output data rate of the sensor [Hz]. + * @samples_to_discard: Number of samples to discard for filters settling time. * @watermark: Sensor watermark level. * @decimator: Sensor decimation factor. * @sip: Number of samples in a given pattern. @@ -367,6 +377,7 @@ struct st_lsm6dsx_sensor { u32 gain; u32 odr; + u16 samples_to_discard; u16 watermark; u8 decimator; u8 sip; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 7dd5205aea5b..f6c11d6fb0b0 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -457,17 +457,31 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) } if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) { - iio_push_to_buffers_with_timestamp( - hw->iio_devs[ST_LSM6DSX_ID_GYRO], - &hw->scan[ST_LSM6DSX_ID_GYRO], - gyro_sensor->ts_ref + ts); + /* + * We need to discards gyro samples during + * filters settling time + */ + if (gyro_sensor->samples_to_discard > 0) + gyro_sensor->samples_to_discard--; + else + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_GYRO], + &hw->scan[ST_LSM6DSX_ID_GYRO], + gyro_sensor->ts_ref + ts); gyro_sip--; } if (acc_sip > 0 && !(sip % acc_sensor->decimator)) { - iio_push_to_buffers_with_timestamp( - hw->iio_devs[ST_LSM6DSX_ID_ACC], - &hw->scan[ST_LSM6DSX_ID_ACC], - acc_sensor->ts_ref + ts); + /* + * We need to discards accel samples during + * filters settling time + */ + if (acc_sensor->samples_to_discard > 0) + acc_sensor->samples_to_discard--; + else + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_ACC], + &hw->scan[ST_LSM6DSX_ID_ACC], + acc_sensor->ts_ref + ts); acc_sip--; } if (ext_sip > 0 && !(sip % ext_sensor->decimator)) { @@ -654,6 +668,30 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw) return err; } +static void +st_lsm6dsx_update_samples_to_discard(struct st_lsm6dsx_sensor *sensor) +{ + const struct st_lsm6dsx_samples_to_discard *data; + struct st_lsm6dsx_hw *hw = sensor->hw; + int i; + + if (sensor->id != ST_LSM6DSX_ID_GYRO && + sensor->id != ST_LSM6DSX_ID_ACC) + return; + + /* check if drdy mask is supported in hw */ + if (hw->settings->drdy_mask.addr) + return; + + data = &hw->settings->samples_to_discard[sensor->id]; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) { + if (data->val[i].milli_hz == sensor->odr) { + sensor->samples_to_discard = data->val[i].samples; + return; + } + } +} + int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable) { struct st_lsm6dsx_hw *hw = sensor->hw; @@ -673,6 +711,9 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable) goto out; } + if (enable) + st_lsm6dsx_update_samples_to_discard(sensor); + err = st_lsm6dsx_device_set_enable(sensor, enable); if (err < 0) goto out; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 3f6060c64f32..966df6ffe874 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -634,6 +634,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .fs_len = 4, }, }, + .samples_to_discard = { + [ST_LSM6DSX_ID_ACC] = { + .val[0] = { 12500, 1 }, + .val[1] = { 26000, 1 }, + .val[2] = { 52000, 1 }, + .val[3] = { 104000, 2 }, + .val[4] = { 208000, 2 }, + .val[5] = { 416000, 2 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .val[0] = { 12500, 2 }, + .val[1] = { 26000, 5 }, + .val[2] = { 52000, 7 }, + .val[3] = { 104000, 12 }, + .val[4] = { 208000, 20 }, + .val[5] = { 416000, 36 }, + }, + }, .irq_config = { .irq1 = { .addr = 0x0d, |