1 files changed, 0 insertions, 40 deletions
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
deleted file mode 100644
index c2db8cabf2ab..000000000000
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-OMAP UART controller
-
-Required properties:
-- compatible : should be "ti,am64-uart", "ti,am654-uart" for AM64 controllers
-- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers
-- compatible : should be "ti,am654-uart" for AM654 controllers
-- compatible : should be "ti,omap2-uart" for OMAP2 controllers
-- compatible : should be "ti,omap3-uart" for OMAP3 controllers
-- compatible : should be "ti,omap4-uart" for OMAP4 controllers
-- compatible : should be "ti,am4372-uart" for AM437x controllers
-- compatible : should be "ti,am3352-uart" for AM335x controllers
-- compatible : should be "ti,dra742-uart" for DRA7x controllers
-- reg : address and length of the register space
-- interrupts or interrupts-extended : Should contain the uart interrupt
-                                      specifier or both the interrupt
-                                      controller phandle and interrupt
-                                      specifier.
-- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
-
-Optional properties:
-- clock-frequency : frequency of the clock input to the UART
-- dmas : DMA specifier, consisting of a phandle to the DMA controller
-         node and a DMA channel number.
-- dma-names : "rx" for receive channel, "tx" for transmit channel.
-- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
-- rs485-rts-active-high: drive RTS high when sending (default is low).
-- clocks: phandle to the functional clock as per
-  Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Example:
-
-                uart4: serial@49042000 {
-                        compatible = "ti,omap3-uart";
-                        reg = <0x49042000 0x400>;
-                        interrupts = <80>;
-                        dmas = <&sdma 81 &sdma 82>;
-                        dma-names = "tx", "rx";
-                        ti,hwmods = "uart4";
-                        clock-frequency = <48000000>;
-                };