diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
16 files changed, 405 insertions, 237 deletions
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 9a88870cd865..054b6b8bf9b9 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -49,13 +49,12 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 7 - nand-ecc-mode: true - nand-ecc-algo: const: bch @@ -75,7 +74,7 @@ patternProperties: minimum: 0 maximum: 1 - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml index 28fb9a7dd70f..787ef488dd5b 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml @@ -40,6 +40,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -58,6 +59,14 @@ patternProperties: meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60 meson-axg-nfc 8 + nand-rb: + maxItems: 1 + items: + maximum: 0 + + unevaluatedProperties: false + + required: - compatible - reg @@ -87,6 +96,7 @@ examples: nand@0 { reg = <0>; + nand-rb = <0>; }; }; diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index 1571024aa119..f57e96374e67 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -114,6 +114,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: compatible: const: brcm,nandcs @@ -136,6 +137,8 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# - if: diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index 0be83ad42970..81f95538d415 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -63,6 +63,12 @@ properties: minItems: 1 maxItems: 2 +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml @@ -74,7 +80,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -92,7 +97,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: @@ -111,7 +115,6 @@ allOf: then: patternProperties: "^nand@[a-f0-9]$": - type: object properties: nand-ecc-strength: enum: diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml index a7bdb5d3675c..b9312ebefeb9 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml @@ -39,7 +39,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + rb-gpios: description: GPIO specifier for the busy pin. maxItems: 1 @@ -48,6 +50,8 @@ patternProperties: description: GPIO specifier for the write-protect pin. maxItems: 1 + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml index cc3def758e00..07bc7e3efd3a 100644 --- a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml +++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml @@ -42,17 +42,16 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 maximum: 1 - nand-ecc-mode: true - nand-ecc-algo: const: hw - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml new file mode 100644 index 000000000000..a10729bb1840 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell NAND Flash Controller (NFC) + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + oneOf: + - items: + - const: marvell,armada-8k-nand-controller + - const: marvell,armada370-nand-controller + - enum: + - marvell,armada370-nand-controller + - marvell,pxa3xx-nand-controller + - description: legacy bindings + deprecated: true + enum: + - marvell,armada-8k-nand + - marvell,armada370-nand + - marvell,pxa3xx-nand + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: + Shall reference the NAND controller clocks, the second one is + is only needed for the Armada 7K/8K SoCs + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + + dmas: + maxItems: 1 + + dma-names: + items: + - const: data + + marvell,system-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: Syscon node that handles NAND controller related registers + +patternProperties: + "^nand@[a-f0-9]$": + type: object + $ref: raw-nand-chip.yaml + + properties: + reg: + minimum: 0 + maximum: 3 + + nand-rb: + items: + - minimum: 0 + maximum: 1 + + nand-ecc-step-size: + const: 512 + + nand-ecc-strength: + enum: [1, 4, 8, 12, 16] + + nand-ecc-mode: + const: hw + + marvell,nand-keep-config: + $ref: /schemas/types.yaml#/definitions/flag + description: + Orders the driver not to take the timings from the core and + leaving them completely untouched. Bootloader timings will then + be used. + + marvell,nand-enable-arbiter: + $ref: /schemas/types.yaml#/definitions/flag + description: + To enable the arbiter, all boards blindly used it, + this bit was set by the bootloader for many boards and even if + it is marked reserved in several datasheets, it might be needed to set + it (otherwise it is harmless). + deprecated: true + + required: + - reg + - nand-rb + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: nand-controller.yaml# + + - if: + properties: + compatible: + contains: + const: marvell,pxa3xx-nand-controller + then: + required: + - dmas + - dma-names + + - if: + properties: + compatible: + contains: + const: marvell,armada-8k-nand-controller + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + required: + - marvell,system-controller + + else: + properties: + clocks: + minItems: 1 + + clock-names: + minItems: 1 + + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coredivclk 0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Rootfs"; + reg = <0x00000000 0x40000000>; + }; + }; + }; + }; + + - | + cp0_nand_controller: nand-controller@720000 { + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&cp0_clk 1 2>, + <&cp0_clk 1 17>; + marvell,system-controller = <&cp0_syscon0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + }; + }; + + - | + nand-controller@43100000 { + compatible = "marvell,pxa3xx-nand-controller"; + reg = <0x43100000 90>; + interrupts = <45>; + clocks = <&clks 1>; + clock-names = "core"; + dmas = <&pdma 97 3>; + dma-names = "data"; + #address-cells = <1>; + #size-cells = <0>; + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt deleted file mode 100644 index a2d9a0f2b683..000000000000 --- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt +++ /dev/null @@ -1,126 +0,0 @@ -Marvell NAND Flash Controller (NFC) - -Required properties: -- compatible: can be one of the following: - * "marvell,armada-8k-nand-controller" - * "marvell,armada370-nand-controller" - * "marvell,pxa3xx-nand-controller" - * "marvell,armada-8k-nand" (deprecated) - * "marvell,armada370-nand" (deprecated) - * "marvell,pxa3xx-nand" (deprecated) - Compatibles marked deprecated support only the old bindings described - at the bottom. -- reg: NAND flash controller memory area. -- #address-cells: shall be set to 1. Encode the NAND CS. -- #size-cells: shall be set to 0. -- interrupts: shall define the NAND controller interrupt. -- clocks: shall reference the NAND controller clocks, the second one is - is only needed for the Armada 7K/8K SoCs -- clock-names: mandatory if there is a second clock, in this case there - should be one clock named "core" and another one named "reg" -- marvell,system-controller: Set to retrieve the syscon node that handles - NAND controller related registers (only required with the - "marvell,armada-8k-nand[-controller]" compatibles). - -Optional properties: -- label: see partition.txt. New platforms shall omit this property. -- dmas: shall reference DMA channel associated to the NAND controller. - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. -- dma-names: shall be "rxtx". - This property is only used with "marvell,pxa3xx-nand[-controller]" - compatible strings. - -Optional children nodes: -Children nodes represent the available NAND chips. - -Required properties: -- reg: shall contain the native Chip Select ids (0-3). -- nand-rb: see nand-controller.yaml (0-1). - -Optional properties: -- marvell,nand-keep-config: orders the driver not to take the timings - from the core and leaving them completely untouched. Bootloader - timings will then be used. -- label: MTD name. -- nand-on-flash-bbt: see nand-controller.yaml. -- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified. -- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when - not using hardware ECC. Howerver, it may be added when using hardware - ECC for clarification but will be ignored by the driver because ECC - mode is chosen depending on the page size and the strength required by - the NAND chip. This value may be overwritten with nand-ecc-strength - property. -- nand-ecc-strength: see nand-controller.yaml. -- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does - use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual - step size will shrink or grow in order to fit the required strength. - Step sizes are not completely random for all and follow certain - patterns described in AN-379, "Marvell SoC NFC ECC". - -See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on -generic bindings. - - -Example: -nand_controller: nand-controller@d0000 { - compatible = "marvell,armada370-nand-controller"; - reg = <0xd0000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coredivclk 0>; - - nand@0 { - reg = <0>; - label = "main-storage"; - nand-rb = <0>; - nand-ecc-mode = "hw"; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Rootfs"; - reg = <0x00000000 0x40000000>; - }; - }; - }; -}; - - -Note on legacy bindings: One can find, in not-updated device trees, -bindings slightly different than described above with other properties -described below as well as the partitions node at the root of a so -called "nand" node (without clear controller/chip separation). - -Legacy properties: -- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly - used it, this bit was set by the bootloader for many boards and even if - it is marked reserved in several datasheets, it might be needed to set - it (otherwise it is harmless) so whether or not this property is set, - the bit is selected by the driver. -- num-cs: Number of chip-select lines to use, all boards blindly set 1 - to this and for a reason, other values would have failed. The value of - this property is ignored. - -Example: - - nand0: nand@43100000 { - compatible = "marvell,pxa3xx-nand"; - reg = <0x43100000 90>; - interrupts = <45>; - dmas = <&pdma 97 0>; - dma-names = "rxtx"; - #address-cells = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - num-cs = <1>; - /* Partitions (optional) */ - }; diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml index a6e7f123eda7..ab503a33a269 100644 --- a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml +++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml @@ -40,12 +40,11 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# + $ref: raw-nand-chip.yaml# unevaluatedProperties: false properties: reg: maximum: 1 - nand-on-flash-bbt: true nand-ecc-mode: const: hw diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index da3d488c335f..b82ca03e969c 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -12,7 +12,7 @@ maintainers: properties: $nodename: - pattern: "^(flash|.*sram)(@.*)?$" + pattern: "^(flash|.*sram|nand)(@.*)?$" label: description: diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index f70a32d2d9d4..83a4fe4cc29d 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -16,16 +16,6 @@ description: | children nodes of the NAND controller. This representation should be enforced even for simple controllers supporting only one chip. - The ECC strength and ECC step size properties define the user - desires in terms of correction capability of a controller. Together, - they request the ECC engine to correct {strength} bit errors per - {size} bytes. - - The interpretation of these parameters is implementation-defined, so - not all implementations must support all possible - combinations. However, implementations are encouraged to further - specify the value(s) they support. - properties: $nodename: pattern: "^nand-controller(@.*)?" @@ -51,79 +41,8 @@ properties: patternProperties: "^nand@[a-f0-9]$": - $ref: nand-chip.yaml# - - properties: - reg: - description: - Contains the chip-select IDs. - - nand-ecc-placement: - description: - Location of the ECC bytes. This location is unknown by default - but can be explicitly set to "oob", if all ECC bytes are - known to be stored in the OOB area, or "interleaved" if ECC - bytes will be interleaved with regular data in the main area. - $ref: /schemas/types.yaml#/definitions/string - enum: [ oob, interleaved ] - - nand-bus-width: - description: - Bus width to the NAND chip - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [8, 16] - default: 8 - - nand-on-flash-bbt: - description: - With this property, the OS will search the device for a Bad - Block Table (BBT). If not found, it will create one, reserve - a few blocks at the end of the device to store it and update - it as the device ages. Otherwise, the out-of-band area of a - few pages of all the blocks will be scanned at boot time to - find Bad Block Markers (BBM). These markers will help to - build a volatile BBT in RAM. - $ref: /schemas/types.yaml#/definitions/flag - - nand-ecc-maximize: - description: - Whether or not the ECC strength should be maximized. The - maximum ECC strength is both controller and chip - dependent. The ECC engine has to select the ECC config - providing the best strength and taking the OOB area size - constraint into account. This is particularly useful when - only the in-band area is used by the upper layers, and you - want to make your NAND as reliable as possible. - $ref: /schemas/types.yaml#/definitions/flag - - nand-is-boot-medium: - description: - Whether or not the NAND chip is a boot medium. Drivers might - use this information to select ECC algorithms supported by - the boot ROM or similar restrictions. - $ref: /schemas/types.yaml#/definitions/flag - - nand-rb: - description: - Contains the native Ready/Busy IDs. - $ref: /schemas/types.yaml#/definitions/uint32-array - - rb-gpios: - description: - Contains one or more GPIO descriptor (the numper of descriptor - depends on the number of R/B pins exposed by the flash) for the - Ready/Busy pins. Active state refers to the NAND ready state and - should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. - - wp-gpios: - description: - Contains one GPIO descriptor for the Write Protect pin. - Active state refers to the NAND Write Protect state and should be - set to GPIOD_ACTIVE_LOW unless the signal is inverted. - maxItems: 1 - - required: - - reg + type: object + $ref: raw-nand-chip.yaml# required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml index 00c991ffa6c4..4ada60fbf81d 100644 --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -34,7 +34,9 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: + nand-bus-width: const: 8 @@ -45,6 +47,24 @@ patternProperties: enum: - 512 + qcom,boot-partitions: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: offset + - description: size + description: + Boot partition use a different layout where the 4 bytes of spare + data are not protected by ECC. Use this to declare these special + partitions by defining first the offset and then the size. + + It's in the form of <offset1 size1 offset2 size2 offset3 ...> + and should be declared in ascending order. + + Refer to the ipq8064 example on how to use this special binding. + + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# @@ -107,22 +127,15 @@ allOf: - qcom,ipq806x-nand then: - properties: - qcom,boot-partitions: - $ref: /schemas/types.yaml#/definitions/uint32-matrix - items: - items: - - description: offset - - description: size - description: - Boot partition use a different layout where the 4 bytes of spare - data are not protected by ECC. Use this to declare these special - partitions by defining first the offset and then the size. - - It's in the form of <offset1 size1 offset2 size2 offset3 ...> - and should be declared in ascending order. - - Refer to the ipq8064 example on how to use this special binding. + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: true + else: + patternProperties: + "^nand@[a-f0-9]$": + properties: + qcom,boot-partitions: false required: - compatible diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml new file mode 100644 index 000000000000..092448d7bfc5 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raw NAND Chip Common Properties + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +allOf: + - $ref: nand-chip.yaml# + +description: | + The ECC strength and ECC step size properties define the user + desires in terms of correction capability of a controller. Together, + they request the ECC engine to correct {strength} bit errors per + {size} bytes for a particular raw NAND chip. + + The interpretation of these parameters is implementation-defined, so + not all implementations must support all possible + combinations. However, implementations are encouraged to further + specify the value(s) they support. + +properties: + $nodename: + pattern: "^nand@[a-f0-9]$" + + reg: + description: + Contains the chip-select IDs. + + nand-ecc-placement: + description: + Location of the ECC bytes. This location is unknown by default + but can be explicitly set to "oob", if all ECC bytes are + known to be stored in the OOB area, or "interleaved" if ECC + bytes will be interleaved with regular data in the main area. + $ref: /schemas/types.yaml#/definitions/string + enum: [ oob, interleaved ] + deprecated: true + + nand-ecc-mode: + description: + Legacy ECC configuration mixing the ECC engine choice and + configuration. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, soft_bch, hw, hw_syndrome, on-die] + deprecated: true + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + + nand-on-flash-bbt: + description: + With this property, the OS will search the device for a Bad + Block Table (BBT). If not found, it will create one, reserve + a few blocks at the end of the device to store it and update + it as the device ages. Otherwise, the out-of-band area of a + few pages of all the blocks will be scanned at boot time to + find Bad Block Markers (BBM). These markers will help to + build a volatile BBT in RAM. + $ref: /schemas/types.yaml#/definitions/flag + + nand-ecc-maximize: + description: + Whether or not the ECC strength should be maximized. The + maximum ECC strength is both controller and chip + dependent. The ECC engine has to select the ECC config + providing the best strength and taking the OOB area size + constraint into account. This is particularly useful when + only the in-band area is used by the upper layers, and you + want to make your NAND as reliable as possible. + $ref: /schemas/types.yaml#/definitions/flag + + nand-is-boot-medium: + description: + Whether or not the NAND chip is a boot medium. Drivers might + use this information to select ECC algorithms supported by + the boot ROM or similar restrictions. + $ref: /schemas/types.yaml#/definitions/flag + + nand-rb: + description: + Contains the native Ready/Busy IDs. + $ref: /schemas/types.yaml#/definitions/uint32-array + + rb-gpios: + description: + Contains one or more GPIO descriptor (the numper of descriptor + depends on the number of R/B pins exposed by the flash) for the + Ready/Busy pins. Active state refers to the NAND ready state and + should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. + + wp-gpios: + description: + Contains one GPIO descriptor for the Write Protect pin. + Active state refers to the NAND Write Protect state and should be + set to GPIOD_ACTIVE_LOW unless the signal is inverted. + maxItems: 1 + +required: + - reg + +# This is a generic file other binding inherit from and extend +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml index 7eb1d0a38565..ee53715ffdca 100644 --- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml @@ -57,6 +57,7 @@ properties: patternProperties: "^nand@[0-7]$": type: object + $ref: raw-nand-chip.yaml properties: reg: minimum: 0 @@ -116,6 +117,8 @@ patternProperties: Only used in combination with 'nand-is-boot-medium'. + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index 986e85ccebc7..e72cb5bacaf0 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -37,6 +37,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": type: object + $ref: raw-nand-chip.yaml properties: nand-ecc-step-size: const: 512 @@ -44,6 +45,8 @@ patternProperties: nand-ecc-strength: enum: [1, 4, 8] + unevaluatedProperties: false + allOf: - $ref: nand-controller.yaml# diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml index 4774c92e7fc4..df4fdc02456d 100644 --- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml +++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml @@ -30,6 +30,8 @@ properties: patternProperties: "^flash@[0-1],[0-9a-f]+$": type: object + $ref: mtd-physmap.yaml + unevaluatedProperties: false required: - compatible |