diff options
Diffstat (limited to 'Documentation/hwmon/sht15')
| -rw-r--r-- | Documentation/hwmon/sht15 | 28 |
1 files changed, 19 insertions, 9 deletions
diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15 index 5e3207c3b177..485abe037f6c 100644 --- a/Documentation/hwmon/sht15 +++ b/Documentation/hwmon/sht15 @@ -2,29 +2,37 @@ Kernel driver sht15 =================== Authors: + * Wouter Horre * Jonathan Cameron * Vivien Didelot <vivien.didelot@savoirfairelinux.com> * Jerome Oufella <jerome.oufella@savoirfairelinux.com> Supported chips: + * Sensirion SHT10 + Prefix: 'sht10' * Sensirion SHT11 + Prefix: 'sht11' * Sensirion SHT15 + Prefix: 'sht15' * Sensirion SHT71 + Prefix: 'sht71' * Sensirion SHT75 + Prefix: 'sht75' Datasheet: Publicly available at the Sensirion website -http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf + + http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf Description ----------- @@ -63,11 +71,13 @@ Platform data Sysfs interface --------------- -* temp1_input: temperature input -* humidity1_input: humidity input -* heater_enable: write 1 in this attribute to enable the on-chip heater, - 0 to disable it. Be careful not to enable the heater - for too long. -* temp1_fault: if 1, this means that the voltage is low (below 2.47V) and - measurement may be invalid. -* humidity1_fault: same as temp1_fault. +================== ========================================================== +temp1_input temperature input +humidity1_input humidity input +heater_enable write 1 in this attribute to enable the on-chip heater, + 0 to disable it. Be careful not to enable the heater + for too long. +temp1_fault if 1, this means that the voltage is low (below 2.47V) and + measurement may be invalid. +humidity1_fault same as temp1_fault. +================== ========================================================== |