1 files changed, 0 insertions, 123 deletions
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
deleted file mode 100644
index a76c12721e63..000000000000
--- a/arch/sh/boards/mach-microdev/io.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/superh/microdev/io.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-	/*
-	 *	we need to have a 'safe' address to re-direct all I/O requests
-	 *	that we do not explicitly wish to handle. This safe address
-	 *	must have the following properies:
-	 *
-	 *		* writes are ignored (no exception)
-	 *		* reads are benign (no side-effects)
-	 *		* accesses of width 1, 2 and 4-bytes are all valid.
-	 *
-	 *	The Processor Version Register (PVR) has these properties.
-	 */
-#define	PVR	0xff000030	/* Processor Version Register */
-
-
-#define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */
-#define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */
-#define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */
-#define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
-#define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */
-#define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */
-#define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */
-#define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
-
-#define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */
-#define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */
-#define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */
-#define IO_SERIAL_EXTENT	0x10ul
-
-#define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */
-#define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
-#define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
-{
-	unsigned long result;
-
-	if ((offset >= IO_LAN91C111_BASE) &&
-	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 *	SMSC LAN91C111 Ethernet chip
-			 */
-		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
-	} else if ((offset >= IO_SUPERIO_BASE) &&
-		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Configuration Registers
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE1_BASE) &&
-		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE1_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #1
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE2_BASE) &&
-		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE2_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #2
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL1_BASE) &&
-		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #1
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL2_BASE) &&
-		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #2
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_ISP1161_BASE) &&
-		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
-			/*
-			 *	Philips USB ISP1161x chip
-			 */
-		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
-	} else {
-			/*
-			 *	safe default.
-			 */
-		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
-		       __func__, offset);
-		result = PVR;
-	}
-
-	return (void __iomem *)result;
-}