diff options
Diffstat (limited to 'drivers/clk/renesas/rzg2l-cpg.c')
| -rw-r--r-- | drivers/clk/renesas/rzg2l-cpg.c | 150 |
1 files changed, 108 insertions, 42 deletions
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c index 6ca81d22c669..8f927568a3c8 100644 --- a/drivers/clk/renesas/rzg2l-cpg.c +++ b/drivers/clk/renesas/rzg2l-cpg.c @@ -61,31 +61,37 @@ #define GET_REG_SAMPLL_CLK1(val) ((val >> 22) & 0xfff) #define GET_REG_SAMPLL_CLK2(val) ((val >> 12) & 0xfff) +#define CPG_WEN_BIT BIT(16) + #define MAX_VCLK_FREQ (148500000) /** * struct clk_hw_data - clock hardware data * @hw: clock hw * @conf: clock configuration (register offset, shift, width) + * @sconf: clock status configuration (register offset, shift, width) * @priv: CPG private data structure */ struct clk_hw_data { struct clk_hw hw; u32 conf; + u32 sconf; struct rzg2l_cpg_priv *priv; }; #define to_clk_hw_data(_hw) container_of(_hw, struct clk_hw_data, hw) /** - * struct sd_hw_data - SD clock hardware data + * struct sd_mux_hw_data - SD MUX clock hardware data * @hw_data: clock hw data + * @mtable: clock mux table */ -struct sd_hw_data { +struct sd_mux_hw_data { struct clk_hw_data hw_data; + const u32 *mtable; }; -#define to_sd_hw_data(_hw) container_of(_hw, struct sd_hw_data, hw_data) +#define to_sd_mux_hw_data(_hw) container_of(_hw, struct sd_mux_hw_data, hw_data) struct rzg2l_pll5_param { u32 pl5_fracin; @@ -142,6 +148,76 @@ static void rzg2l_cpg_del_clk_provider(void *data) of_clk_del_provider(data); } +/* Must be called in atomic context. */ +static int rzg2l_cpg_wait_clk_update_done(void __iomem *base, u32 conf) +{ + u32 bitmask = GENMASK(GET_WIDTH(conf) - 1, 0) << GET_SHIFT(conf); + u32 off = GET_REG_OFFSET(conf); + u32 val; + + return readl_poll_timeout_atomic(base + off, val, !(val & bitmask), 10, 200); +} + +int rzg2l_cpg_sd_clk_mux_notifier(struct notifier_block *nb, unsigned long event, + void *data) +{ + struct clk_notifier_data *cnd = data; + struct clk_hw *hw = __clk_get_hw(cnd->clk); + struct clk_hw_data *clk_hw_data = to_clk_hw_data(hw); + struct rzg2l_cpg_priv *priv = clk_hw_data->priv; + u32 off = GET_REG_OFFSET(clk_hw_data->conf); + u32 shift = GET_SHIFT(clk_hw_data->conf); + const u32 clk_src_266 = 3; + unsigned long flags; + int ret; + + if (event != PRE_RATE_CHANGE || (cnd->new_rate / MEGA == 266)) + return NOTIFY_DONE; + + spin_lock_irqsave(&priv->rmw_lock, flags); + + /* + * As per the HW manual, we should not directly switch from 533 MHz to + * 400 MHz and vice versa. To change the setting from 2’b01 (533 MHz) + * to 2’b10 (400 MHz) or vice versa, Switch to 2’b11 (266 MHz) first, + * and then switch to the target setting (2’b01 (533 MHz) or 2’b10 + * (400 MHz)). + * Setting a value of '0' to the SEL_SDHI0_SET or SEL_SDHI1_SET clock + * switching register is prohibited. + * The clock mux has 3 input clocks(533 MHz, 400 MHz, and 266 MHz), and + * the index to value mapping is done by adding 1 to the index. + */ + + writel((CPG_WEN_BIT | clk_src_266) << shift, priv->base + off); + + /* Wait for the update done. */ + ret = rzg2l_cpg_wait_clk_update_done(priv->base, clk_hw_data->sconf); + + spin_unlock_irqrestore(&priv->rmw_lock, flags); + + if (ret) + dev_err(priv->dev, "failed to switch to safe clk source\n"); + + return notifier_from_errno(ret); +} + +static int rzg2l_register_notifier(struct clk_hw *hw, const struct cpg_core_clk *core, + struct rzg2l_cpg_priv *priv) +{ + struct notifier_block *nb; + + if (!core->notifier) + return 0; + + nb = devm_kzalloc(priv->dev, sizeof(*nb), GFP_KERNEL); + if (!nb) + return -ENOMEM; + + nb->notifier_call = core->notifier; + + return clk_notifier_register(hw->clk, nb); +} + static struct clk * __init rzg2l_cpg_div_clk_register(const struct cpg_core_clk *core, struct clk **clks, @@ -205,48 +281,27 @@ rzg2l_cpg_mux_clk_register(const struct cpg_core_clk *core, static int rzg2l_cpg_sd_clk_mux_set_parent(struct clk_hw *hw, u8 index) { struct clk_hw_data *clk_hw_data = to_clk_hw_data(hw); + struct sd_mux_hw_data *sd_mux_hw_data = to_sd_mux_hw_data(clk_hw_data); struct rzg2l_cpg_priv *priv = clk_hw_data->priv; u32 off = GET_REG_OFFSET(clk_hw_data->conf); u32 shift = GET_SHIFT(clk_hw_data->conf); - const u32 clk_src_266 = 2; - u32 msk, val, bitmask; unsigned long flags; + u32 val; int ret; - /* - * As per the HW manual, we should not directly switch from 533 MHz to - * 400 MHz and vice versa. To change the setting from 2’b01 (533 MHz) - * to 2’b10 (400 MHz) or vice versa, Switch to 2’b11 (266 MHz) first, - * and then switch to the target setting (2’b01 (533 MHz) or 2’b10 - * (400 MHz)). - * Setting a value of '0' to the SEL_SDHI0_SET or SEL_SDHI1_SET clock - * switching register is prohibited. - * The clock mux has 3 input clocks(533 MHz, 400 MHz, and 266 MHz), and - * the index to value mapping is done by adding 1 to the index. - */ - bitmask = (GENMASK(GET_WIDTH(clk_hw_data->conf) - 1, 0) << shift) << 16; - msk = off ? CPG_CLKSTATUS_SELSDHI1_STS : CPG_CLKSTATUS_SELSDHI0_STS; + val = clk_mux_index_to_val(sd_mux_hw_data->mtable, CLK_MUX_ROUND_CLOSEST, index); + spin_lock_irqsave(&priv->rmw_lock, flags); - if (index != clk_src_266) { - writel(bitmask | ((clk_src_266 + 1) << shift), priv->base + off); - - ret = readl_poll_timeout_atomic(priv->base + CPG_CLKSTATUS, val, - !(val & msk), 10, - CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US); - if (ret) - goto unlock; - } - writel(bitmask | ((index + 1) << shift), priv->base + off); + writel((CPG_WEN_BIT | val) << shift, priv->base + off); + + /* Wait for the update done. */ + ret = rzg2l_cpg_wait_clk_update_done(priv->base, clk_hw_data->sconf); - ret = readl_poll_timeout_atomic(priv->base + CPG_CLKSTATUS, val, - !(val & msk), 10, - CPG_SDHI_CLK_SWITCH_STATUS_TIMEOUT_US); -unlock: spin_unlock_irqrestore(&priv->rmw_lock, flags); if (ret) - dev_err(priv->dev, "failed to switch clk source\n"); + dev_err(priv->dev, "Failed to switch parent\n"); return ret; } @@ -254,13 +309,15 @@ unlock: static u8 rzg2l_cpg_sd_clk_mux_get_parent(struct clk_hw *hw) { struct clk_hw_data *clk_hw_data = to_clk_hw_data(hw); + struct sd_mux_hw_data *sd_mux_hw_data = to_sd_mux_hw_data(clk_hw_data); struct rzg2l_cpg_priv *priv = clk_hw_data->priv; - u32 val = readl(priv->base + GET_REG_OFFSET(clk_hw_data->conf)); + u32 val; + val = readl(priv->base + GET_REG_OFFSET(clk_hw_data->conf)); val >>= GET_SHIFT(clk_hw_data->conf); val &= GENMASK(GET_WIDTH(clk_hw_data->conf) - 1, 0); - return val ? val - 1 : 0; + return clk_mux_val_to_index(hw, sd_mux_hw_data->mtable, CLK_MUX_ROUND_CLOSEST, val); } static const struct clk_ops rzg2l_cpg_sd_clk_mux_ops = { @@ -274,31 +331,40 @@ rzg2l_cpg_sd_mux_clk_register(const struct cpg_core_clk *core, void __iomem *base, struct rzg2l_cpg_priv *priv) { - struct sd_hw_data *sd_hw_data; + struct sd_mux_hw_data *sd_mux_hw_data; struct clk_init_data init; struct clk_hw *clk_hw; int ret; - sd_hw_data = devm_kzalloc(priv->dev, sizeof(*sd_hw_data), GFP_KERNEL); - if (!sd_hw_data) + sd_mux_hw_data = devm_kzalloc(priv->dev, sizeof(*sd_mux_hw_data), GFP_KERNEL); + if (!sd_mux_hw_data) return ERR_PTR(-ENOMEM); - sd_hw_data->hw_data.priv = priv; - sd_hw_data->hw_data.conf = core->conf; + sd_mux_hw_data->hw_data.priv = priv; + sd_mux_hw_data->hw_data.conf = core->conf; + sd_mux_hw_data->hw_data.sconf = core->sconf; + sd_mux_hw_data->mtable = core->mtable; init.name = core->name; init.ops = &rzg2l_cpg_sd_clk_mux_ops; - init.flags = 0; + init.flags = core->flag; init.num_parents = core->num_parents; init.parent_names = core->parent_names; - clk_hw = &sd_hw_data->hw_data.hw; + clk_hw = &sd_mux_hw_data->hw_data.hw; clk_hw->init = &init; ret = devm_clk_hw_register(priv->dev, clk_hw); if (ret) return ERR_PTR(ret); + ret = rzg2l_register_notifier(clk_hw, core, priv); + if (ret) { + dev_err(priv->dev, "Failed to register notifier for %s\n", + core->name); + return ERR_PTR(ret); + } + return clk_hw->clk; } |