diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_display_power.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_display_power.c | 1747 |
1 files changed, 0 insertions, 1747 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c index 6a5695008f7c..b3e8ede90039 100644 --- a/drivers/gpu/drm/i915/display/intel_display_power.c +++ b/drivers/gpu/drm/i915/display/intel_display_power.c @@ -9,24 +9,16 @@ #include "i915_irq.h" #include "intel_cdclk.h" #include "intel_combo_phy.h" -#include "intel_combo_phy_regs.h" -#include "intel_crt.h" #include "intel_de.h" #include "intel_display_power.h" #include "intel_display_power_well.h" #include "intel_display_types.h" #include "intel_dmc.h" -#include "intel_dpio_phy.h" -#include "intel_dpll.h" -#include "intel_hotplug.h" #include "intel_mchbar_regs.h" #include "intel_pch_refclk.h" #include "intel_pcode.h" #include "intel_pm.h" -#include "intel_pps.h" #include "intel_snps_phy.h" -#include "intel_tc.h" -#include "intel_vga.h" #include "vlv_sideband.h" const char * @@ -235,604 +227,6 @@ bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv, return ret; } -/* - * Starting with Haswell, we have a "Power Down Well" that can be turned off - * when not needed anymore. We have 4 registers that can request the power well - * to be enabled, and it will only be disabled if none of the registers is - * requesting it to be enabled. - */ -static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv, - u8 irq_pipe_mask, bool has_vga) -{ - if (has_vga) - intel_vga_reset_io_mem(dev_priv); - - if (irq_pipe_mask) - gen8_irq_power_well_post_enable(dev_priv, irq_pipe_mask); -} - -static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv, - u8 irq_pipe_mask) -{ - if (irq_pipe_mask) - gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask); -} - -#define ICL_AUX_PW_TO_CH(pw_idx) \ - ((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A) - -#define ICL_TBT_AUX_PW_TO_CH(pw_idx) \ - ((pw_idx) - ICL_PW_CTL_IDX_AUX_TBT1 + AUX_CH_C) - -static enum aux_ch icl_aux_pw_to_ch(const struct i915_power_well *power_well) -{ - int pw_idx = power_well->desc->hsw.idx; - - return power_well->desc->hsw.is_tc_tbt ? ICL_TBT_AUX_PW_TO_CH(pw_idx) : - ICL_AUX_PW_TO_CH(pw_idx); -} - -static struct intel_digital_port * -aux_ch_to_digital_port(struct drm_i915_private *dev_priv, - enum aux_ch aux_ch) -{ - struct intel_digital_port *dig_port = NULL; - struct intel_encoder *encoder; - - for_each_intel_encoder(&dev_priv->drm, encoder) { - /* We'll check the MST primary port */ - if (encoder->type == INTEL_OUTPUT_DP_MST) - continue; - - dig_port = enc_to_dig_port(encoder); - if (!dig_port) - continue; - - if (dig_port->aux_ch != aux_ch) { - dig_port = NULL; - continue; - } - - break; - } - - return dig_port; -} - -static enum phy icl_aux_pw_to_phy(struct drm_i915_private *i915, - const struct i915_power_well *power_well) -{ - enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well); - struct intel_digital_port *dig_port = aux_ch_to_digital_port(i915, aux_ch); - - return intel_port_to_phy(i915, dig_port->base.port); -} - -static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, - bool timeout_expected) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - int pw_idx = power_well->desc->hsw.idx; - int enable_delay = power_well->desc->hsw.fixed_enable_delay; - - /* - * For some power wells we're not supposed to watch the status bit for - * an ack, but rather just wait a fixed amount of time and then - * proceed. This is only used on DG2. - */ - if (IS_DG2(dev_priv) && enable_delay) { - usleep_range(enable_delay, 2 * enable_delay); - return; - } - - /* Timeout for PW1:10 us, AUX:not specified, other PWs:20 us. */ - if (intel_de_wait_for_set(dev_priv, regs->driver, - HSW_PWR_WELL_CTL_STATE(pw_idx), 1)) { - drm_dbg_kms(&dev_priv->drm, "%s power well enable timeout\n", - intel_power_well_name(power_well)); - - drm_WARN_ON(&dev_priv->drm, !timeout_expected); - - } -} - -static u32 hsw_power_well_requesters(struct drm_i915_private *dev_priv, - const struct i915_power_well_regs *regs, - int pw_idx) -{ - u32 req_mask = HSW_PWR_WELL_CTL_REQ(pw_idx); - u32 ret; - - ret = intel_de_read(dev_priv, regs->bios) & req_mask ? 1 : 0; - ret |= intel_de_read(dev_priv, regs->driver) & req_mask ? 2 : 0; - if (regs->kvmr.reg) - ret |= intel_de_read(dev_priv, regs->kvmr) & req_mask ? 4 : 0; - ret |= intel_de_read(dev_priv, regs->debug) & req_mask ? 8 : 0; - - return ret; -} - -static void hsw_wait_for_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - int pw_idx = power_well->desc->hsw.idx; - bool disabled; - u32 reqs; - - /* - * Bspec doesn't require waiting for PWs to get disabled, but still do - * this for paranoia. The known cases where a PW will be forced on: - * - a KVMR request on any power well via the KVMR request register - * - a DMC request on PW1 and MISC_IO power wells via the BIOS and - * DEBUG request registers - * Skip the wait in case any of the request bits are set and print a - * diagnostic message. - */ - wait_for((disabled = !(intel_de_read(dev_priv, regs->driver) & - HSW_PWR_WELL_CTL_STATE(pw_idx))) || - (reqs = hsw_power_well_requesters(dev_priv, regs, pw_idx)), 1); - if (disabled) - return; - - drm_dbg_kms(&dev_priv->drm, - "%s forced on (bios:%d driver:%d kvmr:%d debug:%d)\n", - intel_power_well_name(power_well), - !!(reqs & 1), !!(reqs & 2), !!(reqs & 4), !!(reqs & 8)); -} - -static void gen9_wait_for_power_well_fuses(struct drm_i915_private *dev_priv, - enum skl_power_gate pg) -{ - /* Timeout 5us for PG#0, for other PGs 1us */ - drm_WARN_ON(&dev_priv->drm, - intel_de_wait_for_set(dev_priv, SKL_FUSE_STATUS, - SKL_FUSE_PG_DIST_STATUS(pg), 1)); -} - -static void hsw_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - int pw_idx = power_well->desc->hsw.idx; - u32 val; - - if (power_well->desc->hsw.has_fuses) { - enum skl_power_gate pg; - - pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) : - SKL_PW_CTL_IDX_TO_PG(pw_idx); - - /* Wa_16013190616:adlp */ - if (IS_ALDERLAKE_P(dev_priv) && pg == SKL_PG1) - intel_de_rmw(dev_priv, GEN8_CHICKEN_DCPR_1, 0, DISABLE_FLR_SRC); - - /* - * For PW1 we have to wait both for the PW0/PG0 fuse state - * before enabling the power well and PW1/PG1's own fuse - * state after the enabling. For all other power wells with - * fuses we only have to wait for that PW/PG's fuse state - * after the enabling. - */ - if (pg == SKL_PG1) - gen9_wait_for_power_well_fuses(dev_priv, SKL_PG0); - } - - val = intel_de_read(dev_priv, regs->driver); - intel_de_write(dev_priv, regs->driver, - val | HSW_PWR_WELL_CTL_REQ(pw_idx)); - - hsw_wait_for_power_well_enable(dev_priv, power_well, false); - - if (power_well->desc->hsw.has_fuses) { - enum skl_power_gate pg; - - pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) : - SKL_PW_CTL_IDX_TO_PG(pw_idx); - gen9_wait_for_power_well_fuses(dev_priv, pg); - } - - hsw_power_well_post_enable(dev_priv, - power_well->desc->hsw.irq_pipe_mask, - power_well->desc->hsw.has_vga); -} - -static void hsw_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - int pw_idx = power_well->desc->hsw.idx; - u32 val; - - hsw_power_well_pre_disable(dev_priv, - power_well->desc->hsw.irq_pipe_mask); - - val = intel_de_read(dev_priv, regs->driver); - intel_de_write(dev_priv, regs->driver, - val & ~HSW_PWR_WELL_CTL_REQ(pw_idx)); - hsw_wait_for_power_well_disable(dev_priv, power_well); -} - -static void -icl_combo_phy_aux_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - int pw_idx = power_well->desc->hsw.idx; - enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); - u32 val; - - drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv)); - - val = intel_de_read(dev_priv, regs->driver); - intel_de_write(dev_priv, regs->driver, - val | HSW_PWR_WELL_CTL_REQ(pw_idx)); - - if (DISPLAY_VER(dev_priv) < 12) { - val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy)); - intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy), - val | ICL_LANE_ENABLE_AUX); - } - - hsw_wait_for_power_well_enable(dev_priv, power_well, false); - - /* Display WA #1178: icl */ - if (pw_idx >= ICL_PW_CTL_IDX_AUX_A && pw_idx <= ICL_PW_CTL_IDX_AUX_B && - !intel_bios_is_port_edp(dev_priv, (enum port)phy)) { - val = intel_de_read(dev_priv, ICL_AUX_ANAOVRD1(pw_idx)); - val |= ICL_AUX_ANAOVRD1_ENABLE | ICL_AUX_ANAOVRD1_LDO_BYPASS; - intel_de_write(dev_priv, ICL_AUX_ANAOVRD1(pw_idx), val); - } -} - -static void -icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - int pw_idx = power_well->desc->hsw.idx; - enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); - u32 val; - - drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv)); - - val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy)); - intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy), - val & ~ICL_LANE_ENABLE_AUX); - - val = intel_de_read(dev_priv, regs->driver); - intel_de_write(dev_priv, regs->driver, - val & ~HSW_PWR_WELL_CTL_REQ(pw_idx)); - - hsw_wait_for_power_well_disable(dev_priv, power_well); -} - -#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) - -static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, - struct intel_digital_port *dig_port) -{ - if (drm_WARN_ON(&dev_priv->drm, !dig_port)) - return; - - if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port)) - return; - - drm_WARN_ON(&dev_priv->drm, !intel_tc_port_ref_held(dig_port)); -} - -#else - -static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, - struct intel_digital_port *dig_port) -{ -} - -#endif - -#define TGL_AUX_PW_TO_TC_PORT(pw_idx) ((pw_idx) - TGL_PW_CTL_IDX_AUX_TC1) - -static void icl_tc_cold_exit(struct drm_i915_private *i915) -{ - int ret, tries = 0; - - while (1) { - ret = snb_pcode_write_timeout(i915, ICL_PCODE_EXIT_TCCOLD, 0, - 250, 1); - if (ret != -EAGAIN || ++tries == 3) - break; - msleep(1); - } - - /* Spec states that TC cold exit can take up to 1ms to complete */ - if (!ret) - msleep(1); - - /* TODO: turn failure into a error as soon i915 CI updates ICL IFWI */ - drm_dbg_kms(&i915->drm, "TC cold block %s\n", ret ? "failed" : - "succeeded"); -} - -static void -icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well); - struct intel_digital_port *dig_port = aux_ch_to_digital_port(dev_priv, aux_ch); - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - bool is_tbt = power_well->desc->hsw.is_tc_tbt; - bool timeout_expected; - u32 val; - - icl_tc_port_assert_ref_held(dev_priv, power_well, dig_port); - - val = intel_de_read(dev_priv, DP_AUX_CH_CTL(aux_ch)); - val &= ~DP_AUX_CH_CTL_TBT_IO; - if (is_tbt) - val |= DP_AUX_CH_CTL_TBT_IO; - intel_de_write(dev_priv, DP_AUX_CH_CTL(aux_ch), val); - - val = intel_de_read(dev_priv, regs->driver); - intel_de_write(dev_priv, regs->driver, - val | HSW_PWR_WELL_CTL_REQ(power_well->desc->hsw.idx)); - - /* - * An AUX timeout is expected if the TBT DP tunnel is down, - * or need to enable AUX on a legacy TypeC port as part of the TC-cold - * exit sequence. - */ - timeout_expected = is_tbt || intel_tc_cold_requires_aux_pw(dig_port); - if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port)) - icl_tc_cold_exit(dev_priv); - - hsw_wait_for_power_well_enable(dev_priv, power_well, timeout_expected); - - if (DISPLAY_VER(dev_priv) >= 12 && !is_tbt) { - enum tc_port tc_port; - - tc_port = TGL_AUX_PW_TO_TC_PORT(power_well->desc->hsw.idx); - intel_de_write(dev_priv, HIP_INDEX_REG(tc_port), - HIP_INDEX_VAL(tc_port, 0x2)); - - if (intel_de_wait_for_set(dev_priv, DKL_CMN_UC_DW_27(tc_port), - DKL_CMN_UC_DW27_UC_HEALTH, 1)) - drm_warn(&dev_priv->drm, - "Timeout waiting TC uC health\n"); - } -} - -static void -icl_aux_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); - - if (intel_phy_is_tc(dev_priv, phy)) - return icl_tc_phy_aux_power_well_enable(dev_priv, power_well); - else if (IS_ICELAKE(dev_priv)) - return icl_combo_phy_aux_power_well_enable(dev_priv, - power_well); - else - return hsw_power_well_enable(dev_priv, power_well); -} - -static void -icl_aux_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well); - - if (intel_phy_is_tc(dev_priv, phy)) - return hsw_power_well_disable(dev_priv, power_well); - else if (IS_ICELAKE(dev_priv)) - return icl_combo_phy_aux_power_well_disable(dev_priv, - power_well); - else - return hsw_power_well_disable(dev_priv, power_well); -} - -/* - * We should only use the power well if we explicitly asked the hardware to - * enable it, so check if it's enabled and also check if we've requested it to - * be enabled. - */ -static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - enum i915_power_well_id id = power_well->desc->id; - int pw_idx = power_well->desc->hsw.idx; - u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx) | - HSW_PWR_WELL_CTL_STATE(pw_idx); - u32 val; - - val = intel_de_read(dev_priv, regs->driver); - - /* - * On GEN9 big core due to a DMC bug the driver's request bits for PW1 - * and the MISC_IO PW will be not restored, so check instead for the - * BIOS's own request bits, which are forced-on for these power wells - * when exiting DC5/6. - */ - if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv) && - (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO)) - val |= intel_de_read(dev_priv, regs->bios); - - return (val & mask) == mask; -} - -static void assert_can_enable_dc9(struct drm_i915_private *dev_priv) -{ - drm_WARN_ONCE(&dev_priv->drm, - (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC9), - "DC9 already programmed to be enabled.\n"); - drm_WARN_ONCE(&dev_priv->drm, - intel_de_read(dev_priv, DC_STATE_EN) & - DC_STATE_EN_UPTO_DC5, - "DC5 still not disabled to enable DC9.\n"); - drm_WARN_ONCE(&dev_priv->drm, - intel_de_read(dev_priv, HSW_PWR_WELL_CTL2) & - HSW_PWR_WELL_CTL_REQ(SKL_PW_CTL_IDX_PW_2), - "Power well 2 on.\n"); - drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv), - "Interrupts not disabled yet.\n"); - - /* - * TODO: check for the following to verify the conditions to enter DC9 - * state are satisfied: - * 1] Check relevant display engine registers to verify if mode set - * disable sequence was followed. - * 2] Check if display uninitialize sequence is initialized. - */ -} - -static void assert_can_disable_dc9(struct drm_i915_private *dev_priv) -{ - drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv), - "Interrupts not disabled yet.\n"); - drm_WARN_ONCE(&dev_priv->drm, - intel_de_read(dev_priv, DC_STATE_EN) & - DC_STATE_EN_UPTO_DC5, - "DC5 still not disabled.\n"); - - /* - * TODO: check for the following to verify DC9 state was indeed - * entered before programming to disable it: - * 1] Check relevant display engine registers to verify if mode - * set disable sequence was followed. - * 2] Check if display uninitialize sequence is initialized. - */ -} - -static void gen9_write_dc_state(struct drm_i915_private *dev_priv, - u32 state) -{ - int rewrites = 0; - int rereads = 0; - u32 v; - - intel_de_write(dev_priv, DC_STATE_EN, state); - - /* It has been observed that disabling the dc6 state sometimes - * doesn't stick and dmc keeps returning old value. Make sure - * the write really sticks enough times and also force rewrite until - * we are confident that state is exactly what we want. - */ - do { - v = intel_de_read(dev_priv, DC_STATE_EN); - - if (v != state) { - intel_de_write(dev_priv, DC_STATE_EN, state); - rewrites++; - rereads = 0; - } else if (rereads++ > 5) { - break; - } - - } while (rewrites < 100); - - if (v != state) - drm_err(&dev_priv->drm, - "Writing dc state to 0x%x failed, now 0x%x\n", - state, v); - - /* Most of the times we need one retry, avoid spam */ - if (rewrites > 1) - drm_dbg_kms(&dev_priv->drm, - "Rewrote dc state to 0x%x %d times\n", - state, rewrites); -} - -static u32 gen9_dc_mask(struct drm_i915_private *dev_priv) -{ - u32 mask; - - mask = DC_STATE_EN_UPTO_DC5; - - if (DISPLAY_VER(dev_priv) >= 12) - mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6 - | DC_STATE_EN_DC9; - else if (DISPLAY_VER(dev_priv) == 11) - mask |= DC_STATE_EN_UPTO_DC6 | DC_STATE_EN_DC9; - else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) - mask |= DC_STATE_EN_DC9; - else - mask |= DC_STATE_EN_UPTO_DC6; - - return mask; -} - -static void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv) -{ - u32 val; - - if (!HAS_DISPLAY(dev_priv)) - return; - - val = intel_de_read(dev_priv, DC_STATE_EN) & gen9_dc_mask(dev_priv); - - drm_dbg_kms(&dev_priv->drm, - "Resetting DC state tracking from %02x to %02x\n", - dev_priv->dmc.dc_state, val); - dev_priv->dmc.dc_state = val; -} - -/** - * gen9_set_dc_state - set target display C power state - * @dev_priv: i915 device instance - * @state: target DC power state - * - DC_STATE_DISABLE - * - DC_STATE_EN_UPTO_DC5 - * - DC_STATE_EN_UPTO_DC6 - * - DC_STATE_EN_DC9 - * - * Signal to DMC firmware/HW the target DC power state passed in @state. - * DMC/HW can turn off individual display clocks and power rails when entering - * a deeper DC power state (higher in number) and turns these back when exiting - * that state to a shallower power state (lower in number). The HW will decide - * when to actually enter a given state on an on-demand basis, for instance - * depending on the active state of display pipes. The state of display - * registers backed by affected power rails are saved/restored as needed. - * - * Based on the above enabling a deeper DC power state is asynchronous wrt. - * enabling it. Disabling a deeper power state is synchronous: for instance - * setting %DC_STATE_DISABLE won't complete until all HW resources are turned - * back on and register state is restored. This is guaranteed by the MMIO write - * to DC_STATE_EN blocking until the state is restored. - */ -static void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state) -{ - u32 val; - u32 mask; - - if (!HAS_DISPLAY(dev_priv)) - return; - - if (drm_WARN_ON_ONCE(&dev_priv->drm, - state & ~dev_priv->dmc.allowed_dc_mask)) - state &= dev_priv->dmc.allowed_dc_mask; - - val = intel_de_read(dev_priv, DC_STATE_EN); - mask = gen9_dc_mask(dev_priv); - drm_dbg_kms(&dev_priv->drm, "Setting DC state from %02x to %02x\n", - val & mask, state); - - /* Check if DMC is ignoring our DC state requests */ - if ((val & mask) != dev_priv->dmc.dc_state) - drm_err(&dev_priv->drm, "DC state mismatch (0x%x -> 0x%x)\n", - dev_priv->dmc.dc_state, val & mask); - - val &= ~mask; - val |= state; - - gen9_write_dc_state(dev_priv, val); - - dev_priv->dmc.dc_state = val & mask; -} - static u32 sanitize_target_dc_state(struct drm_i915_private *dev_priv, u32 target_dc_state) @@ -858,53 +252,6 @@ sanitize_target_dc_state(struct drm_i915_private *dev_priv, return target_dc_state; } -static void tgl_enable_dc3co(struct drm_i915_private *dev_priv) -{ - drm_dbg_kms(&dev_priv->drm, "Enabling DC3CO\n"); - gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO); -} - -static void tgl_disable_dc3co(struct drm_i915_private *dev_priv) -{ - u32 val; - - drm_dbg_kms(&dev_priv->drm, "Disabling DC3CO\n"); - val = intel_de_read(dev_priv, DC_STATE_EN); - val &= ~DC_STATE_DC3CO_STATUS; - intel_de_write(dev_priv, DC_STATE_EN, val); - gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); - /* - * Delay of 200us DC3CO Exit time B.Spec 49196 - */ - usleep_range(200, 210); -} - -static void bxt_enable_dc9(struct drm_i915_private *dev_priv) -{ - assert_can_enable_dc9(dev_priv); - - drm_dbg_kms(&dev_priv->drm, "Enabling DC9\n"); - /* - * Power sequencer reset is not needed on - * platforms with South Display Engine on PCH, - * because PPS registers are always on. - */ - if (!HAS_PCH_SPLIT(dev_priv)) - intel_pps_reset_all(dev_priv); - gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9); -} - -static void bxt_disable_dc9(struct drm_i915_private *dev_priv) -{ - assert_can_disable_dc9(dev_priv); - - drm_dbg_kms(&dev_priv->drm, "Disabling DC9\n"); - - gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); - - intel_pps_unlock_regs_wa(dev_priv); -} - /** * intel_display_power_set_target_dc_state - Set target dc state. * @dev_priv: i915 device @@ -949,912 +296,8 @@ unlock: mutex_unlock(&power_domains->lock); } -static void assert_can_enable_dc5(struct drm_i915_private *dev_priv) -{ - enum i915_power_well_id high_pg; - - /* Power wells at this level and above must be disabled for DC5 entry */ - if (DISPLAY_VER(dev_priv) == 12) - high_pg = ICL_DISP_PW_3; - else - high_pg = SKL_DISP_PW_2; - - drm_WARN_ONCE(&dev_priv->drm, - intel_display_power_well_is_enabled(dev_priv, high_pg), - "Power wells above platform's DC5 limit still enabled.\n"); - - drm_WARN_ONCE(&dev_priv->drm, - (intel_de_read(dev_priv, DC_STATE_EN) & - DC_STATE_EN_UPTO_DC5), - "DC5 already programmed to be enabled.\n"); - assert_rpm_wakelock_held(&dev_priv->runtime_pm); - - assert_dmc_loaded(dev_priv); -} - -static void gen9_enable_dc5(struct drm_i915_private *dev_priv) -{ - assert_can_enable_dc5(dev_priv); - - drm_dbg_kms(&dev_priv->drm, "Enabling DC5\n"); - - /* Wa Display #1183: skl,kbl,cfl */ - if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) - intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1, - intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT); - - gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5); -} - -static void assert_can_enable_dc6(struct drm_i915_private *dev_priv) -{ - drm_WARN_ONCE(&dev_priv->drm, - intel_de_read(dev_priv, UTIL_PIN_CTL) & UTIL_PIN_ENABLE, - "Backlight is not disabled.\n"); - drm_WARN_ONCE(&dev_priv->drm, - (intel_de_read(dev_priv, DC_STATE_EN) & - DC_STATE_EN_UPTO_DC6), - "DC6 already programmed to be enabled.\n"); - - assert_dmc_loaded(dev_priv); -} - -static void skl_enable_dc6(struct drm_i915_private *dev_priv) -{ - assert_can_enable_dc6(dev_priv); - - drm_dbg_kms(&dev_priv->drm, "Enabling DC6\n"); - - /* Wa Display #1183: skl,kbl,cfl */ - if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) - intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1, - intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT); - - gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); -} - -static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - const struct i915_power_well_regs *regs = power_well->desc->ops->regs; - int pw_idx = power_well->desc->hsw.idx; - u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx); - u32 bios_req = intel_de_read(dev_priv, regs->bios); - - /* Take over the request bit if set by BIOS. */ - if (bios_req & mask) { - u32 drv_req = intel_de_read(dev_priv, regs->driver); - - if (!(drv_req & mask)) - intel_de_write(dev_priv, regs->driver, drv_req | mask); - intel_de_write(dev_priv, regs->bios, bios_req & ~mask); - } -} - -static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - bxt_ddi_phy_init(dev_priv, power_well->desc->bxt.phy); -} - -static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - bxt_ddi_phy_uninit(dev_priv, power_well->desc->bxt.phy); -} - -static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - return bxt_ddi_phy_is_enabled(dev_priv, power_well->desc->bxt.phy); -} - -static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv) -{ - struct i915_power_well *power_well; - - power_well = lookup_power_well(dev_priv, BXT_DISP_PW_DPIO_CMN_A); - if (intel_power_well_refcount(power_well) > 0) - bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy); - - power_well = lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC); - if (intel_power_well_refcount(power_well) > 0) - bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy); - - if (IS_GEMINILAKE(dev_priv)) { - power_well = lookup_power_well(dev_priv, - GLK_DISP_PW_DPIO_CMN_C); - if (intel_power_well_refcount(power_well) > 0) - bxt_ddi_phy_verify_state(dev_priv, - power_well->desc->bxt.phy); - } -} - -static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - return ((intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC3CO) == 0 && - (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0); -} - -static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv) -{ - u8 hw_enabled_dbuf_slices = intel_enabled_dbuf_slices_mask(dev_priv); - u8 enabled_dbuf_slices = dev_priv->dbuf.enabled_slices; - - drm_WARN(&dev_priv->drm, - hw_enabled_dbuf_slices != enabled_dbuf_slices, - "Unexpected DBuf power power state (0x%08x, expected 0x%08x)\n", - hw_enabled_dbuf_slices, - enabled_dbuf_slices); -} - -static void gen9_disable_dc_states(struct drm_i915_private *dev_priv) -{ - struct intel_cdclk_config cdclk_config = {}; - - if (dev_priv->dmc.target_dc_state == DC_STATE_EN_DC3CO) { - tgl_disable_dc3co(dev_priv); - return; - } - - gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); - - if (!HAS_DISPLAY(dev_priv)) - return; - - intel_cdclk_get_cdclk(dev_priv, &cdclk_config); - /* Can't read out voltage_level so can't use intel_cdclk_changed() */ - drm_WARN_ON(&dev_priv->drm, - intel_cdclk_needs_modeset(&dev_priv->cdclk.hw, - &cdclk_config)); - - gen9_assert_dbuf_enabled(dev_priv); - - if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) - bxt_verify_ddi_phy_power_wells(dev_priv); - - if (DISPLAY_VER(dev_priv) >= 11) - /* - * DMC retains HW context only for port A, the other combo - * PHY's HW context for port B is lost after DC transitions, - * so we need to restore it manually. - */ - intel_combo_phy_init(dev_priv); -} - -static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - gen9_disable_dc_states(dev_priv); -} - -static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - if (!intel_dmc_has_payload(dev_priv)) - return; - - switch (dev_priv->dmc.target_dc_state) { - case DC_STATE_EN_DC3CO: - tgl_enable_dc3co(dev_priv); - break; - case DC_STATE_EN_UPTO_DC6: - skl_enable_dc6(dev_priv); - break; - case DC_STATE_EN_UPTO_DC5: - gen9_enable_dc5(dev_priv); - break; - } -} - -static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ -} - -static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ -} - -static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - return true; -} - -static void i830_pipes_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - if ((intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE) == 0) - i830_enable_pipe(dev_priv, PIPE_A); - if ((intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE) == 0) - i830_enable_pipe(dev_priv, PIPE_B); -} - -static void i830_pipes_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - i830_disable_pipe(dev_priv, PIPE_B); - i830_disable_pipe(dev_priv, PIPE_A); -} - -static bool i830_pipes_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - return intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE && - intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE; -} - -static void i830_pipes_power_well_sync_hw(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - if (intel_power_well_refcount(power_well) > 0) - i830_pipes_power_well_enable(dev_priv, power_well); - else - i830_pipes_power_well_disable(dev_priv, power_well); -} - -static void vlv_set_power_well(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, bool enable) -{ - int pw_idx = power_well->desc->vlv.idx; - u32 mask; - u32 state; - u32 ctrl; - - mask = PUNIT_PWRGT_MASK(pw_idx); - state = enable ? PUNIT_PWRGT_PWR_ON(pw_idx) : - PUNIT_PWRGT_PWR_GATE(pw_idx); - - vlv_punit_get(dev_priv); - -#define COND \ - ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state) - - if (COND) - goto out; - - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); - ctrl &= ~mask; - ctrl |= state; - vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl); - - if (wait_for(COND, 100)) - drm_err(&dev_priv->drm, - "timeout setting power well state %08x (%08x)\n", - state, - vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); - -#undef COND - -out: - vlv_punit_put(dev_priv); -} - -static void vlv_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_set_power_well(dev_priv, power_well, true); -} - -static void vlv_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_set_power_well(dev_priv, power_well, false); -} - -static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - int pw_idx = power_well->desc->vlv.idx; - bool enabled = false; - u32 mask; - u32 state; - u32 ctrl; - - mask = PUNIT_PWRGT_MASK(pw_idx); - ctrl = PUNIT_PWRGT_PWR_ON(pw_idx); - - vlv_punit_get(dev_priv); - - state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask; - /* - * We only ever set the power-on and power-gate states, anything - * else is unexpected. - */ - drm_WARN_ON(&dev_priv->drm, state != PUNIT_PWRGT_PWR_ON(pw_idx) && - state != PUNIT_PWRGT_PWR_GATE(pw_idx)); - if (state == ctrl) - enabled = true; - - /* - * A transient state at this point would mean some unexpected party - * is poking at the power controls too. - */ - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask; - drm_WARN_ON(&dev_priv->drm, ctrl != state); - - vlv_punit_put(dev_priv); - - return enabled; -} - -static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv) -{ - u32 val; - - /* - * On driver load, a pipe may be active and driving a DSI display. - * Preserve DPOUNIT_CLOCK_GATE_DISABLE to avoid the pipe getting stuck - * (and never recovering) in this case. intel_dsi_post_disable() will - * clear it when we turn off the display. - */ - val = intel_de_read(dev_priv, DSPCLK_GATE_D); - val &= DPOUNIT_CLOCK_GATE_DISABLE; - val |= VRHUNIT_CLOCK_GATE_DISABLE; - intel_de_write(dev_priv, DSPCLK_GATE_D, val); - - /* - * Disable trickle feed and enable pnd deadline calculation - */ - intel_de_write(dev_priv, MI_ARB_VLV, - MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE); - intel_de_write(dev_priv, CBR1_VLV, 0); - - drm_WARN_ON(&dev_priv->drm, RUNTIME_INFO(dev_priv)->rawclk_freq == 0); - intel_de_write(dev_priv, RAWCLK_FREQ_VLV, - DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq, - 1000)); -} - -static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) -{ - struct intel_encoder *encoder; - enum pipe pipe; - - /* - * Enable the CRI clock source so we can get at the - * display and the reference clock for VGA - * hotplug / manual detection. Supposedly DSI also - * needs the ref clock up and running. - * - * CHV DPLL B/C have some issues if VGA mode is enabled. - */ - for_each_pipe(dev_priv, pipe) { - u32 val = intel_de_read(dev_priv, DPLL(pipe)); - - val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; - if (pipe != PIPE_A) - val |= DPLL_INTEGRATED_CRI_CLK_VLV; - - intel_de_write(dev_priv, DPLL(pipe), val); - } - - vlv_init_display_clock_gating(dev_priv); - - spin_lock_irq(&dev_priv->irq_lock); - valleyview_enable_display_irqs(dev_priv); - spin_unlock_irq(&dev_priv->irq_lock); - - /* - * During driver initialization/resume we can avoid restoring the - * part of the HW/SW state that will be inited anyway explicitly. - */ - if (dev_priv->power_domains.initializing) - return; - - intel_hpd_init(dev_priv); - intel_hpd_poll_disable(dev_priv); - - /* Re-enable the ADPA, if we have one */ - for_each_intel_encoder(&dev_priv->drm, encoder) { - if (encoder->type == INTEL_OUTPUT_ANALOG) - intel_crt_reset(&encoder->base); - } - - intel_vga_redisable_power_on(dev_priv); - - intel_pps_unlock_regs_wa(dev_priv); -} - -static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) -{ - spin_lock_irq(&dev_priv->irq_lock); - valleyview_disable_display_irqs(dev_priv); - spin_unlock_irq(&dev_priv->irq_lock); - - /* make sure we're done processing display irqs */ - intel_synchronize_irq(dev_priv); - - intel_pps_reset_all(dev_priv); - - /* Prevent us from re-enabling polling on accident in late suspend */ - if (!dev_priv->drm.dev->power.is_suspended) - intel_hpd_poll_enable(dev_priv); -} - -static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_set_power_well(dev_priv, power_well, true); - - vlv_display_power_well_init(dev_priv); -} - -static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_display_power_well_deinit(dev_priv); - - vlv_set_power_well(dev_priv, power_well, false); -} - -static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - /* since ref/cri clock was enabled */ - udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ - - vlv_set_power_well(dev_priv, power_well, true); - - /* - * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - - * 6. De-assert cmn_reset/side_reset. Same as VLV X0. - * a. GUnit 0x2110 bit[0] set to 1 (def 0) - * b. The other bits such as sfr settings / modesel may all - * be set to 0. - * - * This should only be done on init and resume from S3 with - * both PLLs disabled, or we risk losing DPIO and PLL - * synchronization. - */ - intel_de_write(dev_priv, DPIO_CTL, - intel_de_read(dev_priv, DPIO_CTL) | DPIO_CMNRST); -} - -static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum pipe pipe; - - for_each_pipe(dev_priv, pipe) - assert_pll_disabled(dev_priv, pipe); - - /* Assert common reset */ - intel_de_write(dev_priv, DPIO_CTL, - intel_de_read(dev_priv, DPIO_CTL) & ~DPIO_CMNRST); - - vlv_set_power_well(dev_priv, power_well, false); -} - #define POWER_DOMAIN_MASK (GENMASK_ULL(POWER_DOMAIN_NUM - 1, 0)) -#define BITS_SET(val, bits) (((val) & (bits)) == (bits)) - -static void assert_chv_phy_status(struct drm_i915_private *dev_priv) -{ - struct i915_power_well *cmn_bc = - lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC); - struct i915_power_well *cmn_d = - lookup_power_well(dev_priv, CHV_DISP_PW_DPIO_CMN_D); - u32 phy_control = dev_priv->chv_phy_control; - u32 phy_status = 0; - u32 phy_status_mask = 0xffffffff; - - /* - * The BIOS can leave the PHY is some weird state - * where it doesn't fully power down some parts. - * Disable the asserts until the PHY has been fully - * reset (ie. the power well has been disabled at - * least once). - */ - if (!dev_priv->chv_phy_assert[DPIO_PHY0]) - phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) | - PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) | - PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) | - PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) | - PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) | - PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1)); - - if (!dev_priv->chv_phy_assert[DPIO_PHY1]) - phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) | - PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) | - PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1)); - - if (intel_power_well_is_enabled(dev_priv, cmn_bc)) { - phy_status |= PHY_POWERGOOD(DPIO_PHY0); - - /* this assumes override is only used to enable lanes */ - if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0) - phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0); - - if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0) - phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1); - - /* CL1 is on whenever anything is on in either channel */ - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) | - PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1))) - phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0); - - /* - * The DPLLB check accounts for the pipe B + port A usage - * with CL2 powered up but all the lanes in the second channel - * powered down. - */ - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) && - (intel_de_read(dev_priv, DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0) - phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1); - - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0))) - phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0); - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0))) - phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1); - - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1))) - phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0); - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1))) - phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1); - } - - if (intel_power_well_is_enabled(dev_priv, cmn_d)) { - phy_status |= PHY_POWERGOOD(DPIO_PHY1); - - /* this assumes override is only used to enable lanes */ - if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0) - phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0); - - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0))) - phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0); - - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0))) - phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0); - if (BITS_SET(phy_control, - PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0))) - phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1); - } - - phy_status &= phy_status_mask; - - /* - * The PHY may be busy with some initial calibration and whatnot, - * so the power state can take a while to actually change. - */ - if (intel_de_wait_for_register(dev_priv, DISPLAY_PHY_STATUS, - phy_status_mask, phy_status, 10)) - drm_err(&dev_priv->drm, - "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n", - intel_de_read(dev_priv, DISPLAY_PHY_STATUS) & phy_status_mask, - phy_status, dev_priv->chv_phy_control); -} - -#undef BITS_SET - -static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum dpio_phy phy; - enum pipe pipe; - u32 tmp; - - drm_WARN_ON_ONCE(&dev_priv->drm, - power_well->desc->id != VLV_DISP_PW_DPIO_CMN_BC && - power_well->desc->id != CHV_DISP_PW_DPIO_CMN_D); - - if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) { - pipe = PIPE_A; - phy = DPIO_PHY0; - } else { - pipe = PIPE_C; - phy = DPIO_PHY1; - } - - /* since ref/cri clock was enabled */ - udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ - vlv_set_power_well(dev_priv, power_well, true); - - /* Poll for phypwrgood signal */ - if (intel_de_wait_for_set(dev_priv, DISPLAY_PHY_STATUS, - PHY_POWERGOOD(phy), 1)) - drm_err(&dev_priv->drm, "Display PHY %d is not power up\n", - phy); - - vlv_dpio_get(dev_priv); - - /* Enable dynamic power down */ - tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28); - tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN | - DPIO_SUS_CLK_CONFIG_GATE_CLKREQ; - vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp); - - if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) { - tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1); - tmp |= DPIO_DYNPWRDOWNEN_CH1; - vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp); - } else { - /* - * Force the non-existing CL2 off. BXT does this - * too, so maybe it saves some power even though - * CL2 doesn't exist? - */ - tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); - tmp |= DPIO_CL2_LDOFUSE_PWRENB; - vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp); - } - - vlv_dpio_put(dev_priv); - - dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy); - intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, - dev_priv->chv_phy_control); - - drm_dbg_kms(&dev_priv->drm, - "Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", - phy, dev_priv->chv_phy_control); - - assert_chv_phy_status(dev_priv); -} - -static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum dpio_phy phy; - - drm_WARN_ON_ONCE(&dev_priv->drm, - power_well->desc->id != VLV_DISP_PW_DPIO_CMN_BC && - power_well->desc->id != CHV_DISP_PW_DPIO_CMN_D); - - if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) { - phy = DPIO_PHY0; - assert_pll_disabled(dev_priv, PIPE_A); - assert_pll_disabled(dev_priv, PIPE_B); - } else { - phy = DPIO_PHY1; - assert_pll_disabled(dev_priv, PIPE_C); - } - - dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy); - intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, - dev_priv->chv_phy_control); - - vlv_set_power_well(dev_priv, power_well, false); - - drm_dbg_kms(&dev_priv->drm, - "Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", - phy, dev_priv->chv_phy_control); - - /* PHY is fully reset now, so we can enable the PHY state asserts */ - dev_priv->chv_phy_assert[phy] = true; - - assert_chv_phy_status(dev_priv); -} - -static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy, - enum dpio_channel ch, bool override, unsigned int mask) -{ - enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C; - u32 reg, val, expected, actual; - - /* - * The BIOS can leave the PHY is some weird state - * where it doesn't fully power down some parts. - * Disable the asserts until the PHY has been fully - * reset (ie. the power well has been disabled at - * least once). - */ - if (!dev_priv->chv_phy_assert[phy]) - return; - - if (ch == DPIO_CH0) - reg = _CHV_CMN_DW0_CH0; - else - reg = _CHV_CMN_DW6_CH1; - - vlv_dpio_get(dev_priv); - val = vlv_dpio_read(dev_priv, pipe, reg); - vlv_dpio_put(dev_priv); - - /* - * This assumes !override is only used when the port is disabled. - * All lanes should power down even without the override when - * the port is disabled. - */ - if (!override || mask == 0xf) { - expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; - /* - * If CH1 common lane is not active anymore - * (eg. for pipe B DPLL) the entire channel will - * shut down, which causes the common lane registers - * to read as 0. That means we can't actually check - * the lane power down status bits, but as the entire - * register reads as 0 it's a good indication that the - * channel is indeed entirely powered down. - */ - if (ch == DPIO_CH1 && val == 0) - expected = 0; - } else if (mask != 0x0) { - expected = DPIO_ANYDL_POWERDOWN; - } else { - expected = 0; - } - - if (ch == DPIO_CH0) - actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0; - else - actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1; - actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; - - drm_WARN(&dev_priv->drm, actual != expected, - "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n", - !!(actual & DPIO_ALLDL_POWERDOWN), - !!(actual & DPIO_ANYDL_POWERDOWN), - !!(expected & DPIO_ALLDL_POWERDOWN), - !!(expected & DPIO_ANYDL_POWERDOWN), - reg, val); -} - -bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy, - enum dpio_channel ch, bool override) -{ - struct i915_power_domains *power_domains = &dev_priv->power_domains; - bool was_override; - - mutex_lock(&power_domains->lock); - - was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); - - if (override == was_override) - goto out; - - if (override) - dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); - else - dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); - - intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, - dev_priv->chv_phy_control); - - drm_dbg_kms(&dev_priv->drm, - "Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n", - phy, ch, dev_priv->chv_phy_control); - - assert_chv_phy_status(dev_priv); - -out: - mutex_unlock(&power_domains->lock); - - return was_override; -} - -void chv_phy_powergate_lanes(struct intel_encoder *encoder, - bool override, unsigned int mask) -{ - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - struct i915_power_domains *power_domains = &dev_priv->power_domains; - enum dpio_phy phy = vlv_dig_port_to_phy(enc_to_dig_port(encoder)); - enum dpio_channel ch = vlv_dig_port_to_channel(enc_to_dig_port(encoder)); - - mutex_lock(&power_domains->lock); - - dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch); - dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch); - - if (override) - dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); - else - dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); - - intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, - dev_priv->chv_phy_control); - - drm_dbg_kms(&dev_priv->drm, - "Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n", - phy, ch, mask, dev_priv->chv_phy_control); - - assert_chv_phy_status(dev_priv); - - assert_chv_phy_powergate(dev_priv, phy, ch, override, mask); - - mutex_unlock(&power_domains->lock); -} - -static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum pipe pipe = PIPE_A; - bool enabled; - u32 state, ctrl; - - vlv_punit_get(dev_priv); - - state = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe); - /* - * We only ever set the power-on and power-gate states, anything - * else is unexpected. - */ - drm_WARN_ON(&dev_priv->drm, state != DP_SSS_PWR_ON(pipe) && - state != DP_SSS_PWR_GATE(pipe)); - enabled = state == DP_SSS_PWR_ON(pipe); - - /* - * A transient state at this point would mean some unexpected party - * is poking at the power controls too. - */ - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSC_MASK(pipe); - drm_WARN_ON(&dev_priv->drm, ctrl << 16 != state); - - vlv_punit_put(dev_priv); - - return enabled; -} - -static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, - bool enable) -{ - enum pipe pipe = PIPE_A; - u32 state; - u32 ctrl; - - state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe); - - vlv_punit_get(dev_priv); - -#define COND \ - ((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe)) == state) - - if (COND) - goto out; - - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM); - ctrl &= ~DP_SSC_MASK(pipe); - ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); - vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, ctrl); - - if (wait_for(COND, 100)) - drm_err(&dev_priv->drm, - "timeout setting power well state %08x (%08x)\n", - state, - vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM)); - -#undef COND - -out: - vlv_punit_put(dev_priv); -} - -static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, - dev_priv->chv_phy_control); -} - -static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - chv_set_pipe_power_well(dev_priv, power_well, true); - - vlv_display_power_well_init(dev_priv); -} - -static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_display_power_well_deinit(dev_priv); - - chv_set_pipe_power_well(dev_priv, power_well, false); -} - static u64 __async_put_domains_mask(struct i915_power_domains *power_domains) { return power_domains->async_put_domains[0] | @@ -3034,27 +1477,6 @@ intel_display_power_put_mask_in_set(struct drm_i915_private *i915, #define XELPD_DDI_IO_TC3_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC3) #define XELPD_DDI_IO_TC4_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC4) -static const struct i915_power_well_ops i9xx_always_on_power_well_ops = { - .sync_hw = i9xx_power_well_sync_hw_noop, - .enable = i9xx_always_on_power_well_noop, - .disable = i9xx_always_on_power_well_noop, - .is_enabled = i9xx_always_on_power_well_enabled, -}; - -static const struct i915_power_well_ops chv_pipe_power_well_ops = { - .sync_hw = chv_pipe_power_well_sync_hw, - .enable = chv_pipe_power_well_enable, - .disable = chv_pipe_power_well_disable, - .is_enabled = chv_pipe_power_well_enabled, -}; - -static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = { - .sync_hw = i9xx_power_well_sync_hw_noop, - .enable = chv_dpio_cmn_power_well_enable, - .disable = chv_dpio_cmn_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - static const struct i915_power_well_desc i9xx_always_on_power_well[] = { { .name = "always-on", @@ -3065,13 +1487,6 @@ static const struct i915_power_well_desc i9xx_always_on_power_well[] = { }, }; -static const struct i915_power_well_ops i830_pipes_power_well_ops = { - .sync_hw = i830_pipes_power_well_sync_hw, - .enable = i830_pipes_power_well_enable, - .disable = i830_pipes_power_well_disable, - .is_enabled = i830_pipes_power_well_enabled, -}; - static const struct i915_power_well_desc i830_power_wells[] = { { .name = "always-on", @@ -3088,35 +1503,6 @@ static const struct i915_power_well_desc i830_power_wells[] = { }, }; -static const struct i915_power_well_regs hsw_power_well_regs = { - .bios = HSW_PWR_WELL_CTL1, - .driver = HSW_PWR_WELL_CTL2, - .kvmr = HSW_PWR_WELL_CTL3, - .debug = HSW_PWR_WELL_CTL4, -}; - -static const struct i915_power_well_ops hsw_power_well_ops = { - .regs = &hsw_power_well_regs, - .sync_hw = hsw_power_well_sync_hw, - .enable = hsw_power_well_enable, - .disable = hsw_power_well_disable, - .is_enabled = hsw_power_well_enabled, -}; - -static const struct i915_power_well_ops gen9_dc_off_power_well_ops = { - .sync_hw = i9xx_power_well_sync_hw_noop, - .enable = gen9_dc_off_power_well_enable, - .disable = gen9_dc_off_power_well_disable, - .is_enabled = gen9_dc_off_power_well_enabled, -}; - -static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = { - .sync_hw = i9xx_power_well_sync_hw_noop, - .enable = bxt_dpio_cmn_power_well_enable, - .disable = bxt_dpio_cmn_power_well_disable, - .is_enabled = bxt_dpio_cmn_power_well_enabled, -}; - static const struct i915_power_well_desc hsw_power_wells[] = { { .name = "always-on", @@ -3158,27 +1544,6 @@ static const struct i915_power_well_desc bdw_power_wells[] = { }, }; -static const struct i915_power_well_ops vlv_display_power_well_ops = { - .sync_hw = i9xx_power_well_sync_hw_noop, - .enable = vlv_display_power_well_enable, - .disable = vlv_display_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - -static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = { - .sync_hw = i9xx_power_well_sync_hw_noop, - .enable = vlv_dpio_cmn_power_well_enable, - .disable = vlv_dpio_cmn_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - -static const struct i915_power_well_ops vlv_dpio_power_well_ops = { - .sync_hw = i9xx_power_well_sync_hw_noop, - .enable = vlv_power_well_enable, - .disable = vlv_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - static const struct i915_power_well_desc vlv_power_wells[] = { { .name = "always-on", @@ -3560,34 +1925,6 @@ static const struct i915_power_well_desc glk_power_wells[] = { }, }; -static const struct i915_power_well_regs icl_aux_power_well_regs = { - .bios = ICL_PWR_WELL_CTL_AUX1, - .driver = ICL_PWR_WELL_CTL_AUX2, - .debug = ICL_PWR_WELL_CTL_AUX4, -}; - -static const struct i915_power_well_ops icl_aux_power_well_ops = { - .regs = &icl_aux_power_well_regs, - .sync_hw = hsw_power_well_sync_hw, - .enable = icl_aux_power_well_enable, - .disable = icl_aux_power_well_disable, - .is_enabled = hsw_power_well_enabled, -}; - -static const struct i915_power_well_regs icl_ddi_power_well_regs = { - .bios = ICL_PWR_WELL_CTL_DDI1, - .driver = ICL_PWR_WELL_CTL_DDI2, - .debug = ICL_PWR_WELL_CTL_DDI4, -}; - -static const struct i915_power_well_ops icl_ddi_power_well_ops = { - .regs = &icl_ddi_power_well_regs, - .sync_hw = hsw_power_well_sync_hw, - .enable = hsw_power_well_enable, - .disable = hsw_power_well_disable, - .is_enabled = hsw_power_well_enabled, -}; - static const struct i915_power_well_desc icl_power_wells[] = { { .name = "always-on", @@ -3801,90 +2138,6 @@ static const struct i915_power_well_desc icl_power_wells[] = { }, }; -static void -tgl_tc_cold_request(struct drm_i915_private *i915, bool block) -{ - u8 tries = 0; - int ret; - - while (1) { - u32 low_val; - u32 high_val = 0; - - if (block) - low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ; - else - low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ; - - /* - * Spec states that we should timeout the request after 200us - * but the function below will timeout after 500us - */ - ret = snb_pcode_read(i915, TGL_PCODE_TCCOLD, &low_val, &high_val); - if (ret == 0) { - if (block && - (low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED)) - ret = -EIO; - else - break; - } - - if (++tries == 3) - break; - - msleep(1); - } - - if (ret) - drm_err(&i915->drm, "TC cold %sblock failed\n", - block ? "" : "un"); - else - drm_dbg_kms(&i915->drm, "TC cold %sblock succeeded\n", - block ? "" : "un"); -} - -static void -tgl_tc_cold_off_power_well_enable(struct drm_i915_private *i915, - struct i915_power_well *power_well) -{ - tgl_tc_cold_request(i915, true); -} - -static void -tgl_tc_cold_off_power_well_disable(struct drm_i915_private *i915, - struct i915_power_well *power_well) -{ - tgl_tc_cold_request(i915, false); -} - -static void -tgl_tc_cold_off_power_well_sync_hw(struct drm_i915_private *i915, - struct i915_power_well *power_well) -{ - if (intel_power_well_refcount(power_well) > 0) - tgl_tc_cold_off_power_well_enable(i915, power_well); - else - tgl_tc_cold_off_power_well_disable(i915, power_well); -} - -static bool -tgl_tc_cold_off_power_well_is_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - /* - * Not the correctly implementation but there is no way to just read it - * from PCODE, so returning count to avoid state mismatch errors - */ - return intel_power_well_refcount(power_well); -} - -static const struct i915_power_well_ops tgl_tc_cold_off_ops = { - .sync_hw = tgl_tc_cold_off_power_well_sync_hw, - .enable = tgl_tc_cold_off_power_well_enable, - .disable = tgl_tc_cold_off_power_well_disable, - .is_enabled = tgl_tc_cold_off_power_well_is_enabled, -}; - static const struct i915_power_well_desc tgl_power_wells[] = { { .name = "always-on", |