diff options
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 32 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-virtio.c | 14 |
2 files changed, 30 insertions, 16 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 05187457f88a..41446f9cc52d 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -191,6 +191,7 @@ #define SMBSLVSTS_HST_NTFY_STS BIT(0) /* Host Notify Command register bits */ +#define SMBSLVCMD_SMBALERT_DISABLE BIT(2) #define SMBSLVCMD_HST_NTFY_INTREN BIT(0) #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ @@ -259,6 +260,7 @@ struct i801_priv { struct i2c_adapter adapter; unsigned long smba; unsigned char original_hstcfg; + unsigned char original_hstcnt; unsigned char original_slvcmd; struct pci_dev *pci_dev; unsigned int features; @@ -641,12 +643,20 @@ static irqreturn_t i801_isr(int irq, void *dev_id) i801_isr_byte_done(priv); /* - * Clear irq sources and report transaction result. + * Clear remaining IRQ sources: Completion of last command, errors + * and the SMB_ALERT signal. SMB_ALERT status is set after signal + * assertion independently of the interrupt generation being blocked + * or not so clear it always when the status is set. + */ + status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS | SMBHSTSTS_SMBALERT_STS; + if (status) + outb_p(status, SMBHSTSTS(priv)); + status &= ~SMBHSTSTS_SMBALERT_STS; /* SMB_ALERT not reported */ + /* + * Report transaction result. * ->status must be cleared before the next transaction is started. */ - status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; if (status) { - outb_p(status, SMBHSTSTS(priv)); priv->status = status; complete(&priv->done); } @@ -974,9 +984,13 @@ static void i801_enable_host_notify(struct i2c_adapter *adapter) if (!(priv->features & FEATURE_HOST_NOTIFY)) return; - if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd)) - outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd, - SMBSLVCMD(priv)); + /* + * Enable host notify interrupt and block the generation of interrupt + * from the SMB_ALERT signal because the driver does not support + * SMBus Alert. + */ + outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE | + priv->original_slvcmd, SMBSLVCMD(priv)); /* clear Host Notify bit to allow a new notification */ outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); @@ -1805,7 +1819,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); - /* Remember original Host Notify setting */ + /* Remember original Interrupt and Host Notify settings */ + priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL; if (priv->features & FEATURE_HOST_NOTIFY) priv->original_slvcmd = inb_p(SMBSLVCMD(priv)); @@ -1869,6 +1884,7 @@ static void i801_remove(struct pci_dev *dev) { struct i801_priv *priv = pci_get_drvdata(dev); + outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); i801_disable_host_notify(priv); i801_del_mux(priv); i2c_del_adapter(&priv->adapter); @@ -1892,6 +1908,7 @@ static void i801_shutdown(struct pci_dev *dev) struct i801_priv *priv = pci_get_drvdata(dev); /* Restore config registers to avoid hard hang on some systems */ + outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); i801_disable_host_notify(priv); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); } @@ -1901,6 +1918,7 @@ static int i801_suspend(struct device *dev) { struct i801_priv *priv = dev_get_drvdata(dev); + outb_p(priv->original_hstcnt, SMBHSTCNT(priv)); pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg); return 0; } diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c index 1ed4daa918a0..95378780da6d 100644 --- a/drivers/i2c/busses/i2c-virtio.c +++ b/drivers/i2c/busses/i2c-virtio.c @@ -104,11 +104,10 @@ static int virtio_i2c_prepare_reqs(struct virtqueue *vq, static int virtio_i2c_complete_reqs(struct virtqueue *vq, struct virtio_i2c_req *reqs, - struct i2c_msg *msgs, int num, - bool timedout) + struct i2c_msg *msgs, int num) { struct virtio_i2c_req *req; - bool failed = timedout; + bool failed = false; unsigned int len; int i, j = 0; @@ -130,7 +129,7 @@ static int virtio_i2c_complete_reqs(struct virtqueue *vq, j++; } - return timedout ? -ETIMEDOUT : j; + return j; } static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, @@ -139,7 +138,6 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, struct virtio_i2c *vi = i2c_get_adapdata(adap); struct virtqueue *vq = vi->vq; struct virtio_i2c_req *reqs; - unsigned long time_left; int count; reqs = kcalloc(num, sizeof(*reqs), GFP_KERNEL); @@ -162,11 +160,9 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, reinit_completion(&vi->completion); virtqueue_kick(vq); - time_left = wait_for_completion_timeout(&vi->completion, adap->timeout); - if (!time_left) - dev_err(&adap->dev, "virtio i2c backend timeout.\n"); + wait_for_completion(&vi->completion); - count = virtio_i2c_complete_reqs(vq, reqs, msgs, count, !time_left); + count = virtio_i2c_complete_reqs(vq, reqs, msgs, count); err_free: kfree(reqs); |