diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 11 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-mxs.c | 186 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-nomadik.c | 9 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-stub.c | 222 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-tegra.c | 2 |
7 files changed, 29 insertions, 403 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 65dd599a0262..e9df4612b7eb 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -81,7 +81,6 @@ config I2C_I801 tristate "Intel 82801 (ICH/PCH)" depends on PCI select CHECK_SIGNATURE if X86 && DMI - select GPIOLIB if I2C_MUX help If you say yes to this option, support will be included for the Intel 801 family of mainboard I2C interfaces. Specifically, the following diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 2d33d62952c1..395b516ffa08 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -85,7 +85,6 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o -obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 37793156bd93..6abc00d59881 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -82,7 +82,8 @@ #include <linux/wait.h> #include <linux/err.h> -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI #include <linux/gpio.h> #include <linux/i2c-mux-gpio.h> #include <linux/platform_device.h> @@ -192,7 +193,8 @@ struct i801_priv { int len; u8 *data; -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI const struct i801_mux_config *mux_drvdata; struct platform_device *mux_pdev; #endif @@ -921,7 +923,8 @@ static void __init input_apanel_init(void) {} static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {} #endif /* CONFIG_X86 && CONFIG_DMI */ -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI static struct i801_mux_config i801_mux_config_asus_z8_d12 = { .gpio_chip = "gpio_ich", .values = { 0x02, 0x03 }, @@ -1059,7 +1062,7 @@ static unsigned int __devinit i801_get_adapter_class(struct i801_priv *priv) id = dmi_first_match(mux_dmi_table); if (id) { - /* Remove from branch classes from trunk */ + /* Remove branch classes from trunk */ mux_config = id->driver_data; for (i = 0; i < mux_config->n_values; i++) class &= ~mux_config->classes[i]; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1f58197062cf..286ca1917820 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -1,7 +1,7 @@ /* * Freescale MXS I2C bus driver * - * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. + * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K. * * based on a (non-working) driver which was: * @@ -35,10 +35,6 @@ #define DRIVER_NAME "mxs-i2c" -static bool use_pioqueue; -module_param(use_pioqueue, bool, 0); -MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); - #define MXS_I2C_CTRL0 (0x00) #define MXS_I2C_CTRL0_SET (0x04) @@ -75,23 +71,6 @@ MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \ MXS_I2C_CTRL1_SLAVE_IRQ) -#define MXS_I2C_QUEUECTRL (0x60) -#define MXS_I2C_QUEUECTRL_SET (0x64) -#define MXS_I2C_QUEUECTRL_CLR (0x68) - -#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20 -#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04 - -#define MXS_I2C_QUEUESTAT (0x70) -#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 -#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F - -#define MXS_I2C_QUEUECMD (0x80) - -#define MXS_I2C_QUEUEDATA (0x90) - -#define MXS_I2C_DATA (0xa0) - #define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \ MXS_I2C_CTRL0_PRE_SEND_START | \ @@ -153,7 +132,6 @@ struct mxs_i2c_dev { const struct mxs_i2c_speed_config *speed; /* DMA support components */ - bool dma_mode; int dma_channel; struct dma_chan *dmach; struct mxs_dma_data dma_data; @@ -172,99 +150,6 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); - if (i2c->dma_mode) - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); - else - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_SET); -} - -static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, - int flags) -{ - u32 data; - - writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD); - - data = (addr << 1) | I2C_SMBUS_READ; - writel(data, i2c->regs + MXS_I2C_DATA); - - data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); -} - -static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, - u8 addr, u8 *buf, int len, int flags) -{ - u32 data; - int i, shifts_left; - - data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); - - /* - * We have to copy the slave address (u8) and buffer (arbitrary number - * of u8) into the data register (u32). To achieve that, the u8 are put - * into the MSBs of 'data' which is then shifted for the next u8. When - * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 - * looks like this: - * - * 3 2 1 0 - * 10987654|32109876|54321098|76543210 - * --------+--------+--------+-------- - * buffer+2|buffer+1|buffer+0|slave_addr - */ - - data = ((addr << 1) | I2C_SMBUS_WRITE) << 24; - - for (i = 0; i < len; i++) { - data >>= 8; - data |= buf[i] << 24; - if ((i & 3) == 2) - writel(data, i2c->regs + MXS_I2C_DATA); - } - - /* Write out the remaining bytes if any */ - shifts_left = 24 - (i & 3) * 8; - if (shifts_left) - writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA); -} - -/* - * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the - * rd_threshold to 1). Couldn't get this to work, though. - */ -static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - - while (readl(i2c->regs + MXS_I2C_QUEUESTAT) - & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) { - if (time_after(jiffies, timeout)) - return -ETIMEDOUT; - cond_resched(); - } - - return 0; -} - -static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) -{ - u32 uninitialized_var(data); - int i; - - for (i = 0; i < len; i++) { - if ((i & 3) == 0) { - if (mxs_i2c_wait_for_data(i2c)) - return -ETIMEDOUT; - data = readl(i2c->regs + MXS_I2C_QUEUEDATA); - } - buf[i] = data & 0xff; - data >>= 8; - } - - return 0; } static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) @@ -432,39 +317,17 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, init_completion(&i2c->cmd_complete); i2c->cmd_err = 0; - if (i2c->dma_mode) { - ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); - if (ret) - return ret; - } else { - if (msg->flags & I2C_M_RD) { - mxs_i2c_pioq_setup_read(i2c, msg->addr, - msg->len, flags); - } else { - mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, - msg->len, flags); - } - - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_SET); - } + ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); + if (ret) + return ret; ret = wait_for_completion_timeout(&i2c->cmd_complete, msecs_to_jiffies(1000)); if (ret == 0) goto timeout; - if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) { - ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); - if (ret) - goto timeout; - } - if (i2c->cmd_err == -ENXIO) mxs_i2c_reset(i2c); - else - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); @@ -472,8 +335,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); - if (i2c->dma_mode) - mxs_i2c_dma_finish(i2c); + mxs_i2c_dma_finish(i2c); mxs_i2c_reset(i2c); return -ETIMEDOUT; } @@ -502,7 +364,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; - bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -515,14 +376,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - if (!i2c->dma_mode) { - is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & - MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; - - if (is_last_cmd || i2c->cmd_err) - complete(&i2c->cmd_complete); - } - writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); return IRQ_HANDLED; @@ -556,23 +409,14 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) int ret; /* - * The MXS I2C DMA mode is prefered and enabled by default. - * The PIO mode is still supported, but should be used only - * for debuging purposes etc. - */ - i2c->dma_mode = !use_pioqueue; - if (!i2c->dma_mode) - dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n"); - - /* * TODO: This is a temporary solution and should be changed * to use generic DMA binding later when the helpers get in. */ ret = of_property_read_u32(node, "fsl,i2c-dma-channel", &i2c->dma_channel); if (ret) { - dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n"); - i2c->dma_mode = 0; + dev_err(dev, "Failed to get DMA channel!\n"); + return -ENODEV; } ret = of_property_read_u32(node, "clock-frequency", &speed); @@ -634,15 +478,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) } /* Setup the DMA */ - if (i2c->dma_mode) { - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - i2c->dma_data.chan_irq = dmairq; - i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); - if (!i2c->dmach) { - dev_err(dev, "Failed to request dma\n"); - return -ENODEV; - } + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + i2c->dma_data.chan_irq = dmairq; + i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); + if (!i2c->dmach) { + dev_err(dev, "Failed to request dma\n"); + return -ENODEV; } platform_set_drvdata(pdev, i2c); diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 698d7acb0f08..02c3115a2dfa 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -644,7 +644,11 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, pm_runtime_get_sync(&dev->adev->dev); - clk_enable(dev->clk); + status = clk_prepare_enable(dev->clk); + if (status) { + dev_err(&dev->adev->dev, "can't prepare_enable clock\n"); + goto out_clk; + } status = init_hw(dev); if (status) @@ -671,7 +675,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, } out: - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); +out_clk: pm_runtime_put_sync(&dev->adev->dev); dev->busy = false; diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c deleted file mode 100644 index b1b3447942c9..000000000000 --- a/drivers/i2c/busses/i2c-stub.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - i2c-stub.c - I2C/SMBus chip emulator - - Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com> - Copyright (C) 2007 Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#define DEBUG 1 - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/i2c.h> - -#define MAX_CHIPS 10 -#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK) - -static unsigned short chip_addr[MAX_CHIPS]; -module_param_array(chip_addr, ushort, NULL, S_IRUGO); -MODULE_PARM_DESC(chip_addr, - "Chip addresses (up to 10, between 0x03 and 0x77)"); - -static unsigned long functionality = STUB_FUNC; -module_param(functionality, ulong, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(functionality, "Override functionality bitfield"); - -struct stub_chip { - u8 pointer; - u16 words[256]; /* Byte operations use the LSB as per SMBus - specification */ -}; - -static struct stub_chip *stub_chips; - -/* Return negative errno on error. */ -static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, - char read_write, u8 command, int size, union i2c_smbus_data * data) -{ - s32 ret; - int i, len; - struct stub_chip *chip = NULL; - - /* Search for the right chip */ - for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { - if (addr == chip_addr[i]) { - chip = stub_chips + i; - break; - } - } - if (!chip) - return -ENODEV; - - switch (size) { - - case I2C_SMBUS_QUICK: - dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr); - ret = 0; - break; - - case I2C_SMBUS_BYTE: - if (read_write == I2C_SMBUS_WRITE) { - chip->pointer = command; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "wrote 0x%02x.\n", - addr, command); - } else { - data->byte = chip->words[chip->pointer++] & 0xff; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "read 0x%02x.\n", - addr, data->byte); - } - - ret = 0; - break; - - case I2C_SMBUS_BYTE_DATA: - if (read_write == I2C_SMBUS_WRITE) { - chip->words[command] &= 0xff00; - chip->words[command] |= data->byte; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "wrote 0x%02x at 0x%02x.\n", - addr, data->byte, command); - } else { - data->byte = chip->words[command] & 0xff; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "read 0x%02x at 0x%02x.\n", - addr, data->byte, command); - } - chip->pointer = command + 1; - - ret = 0; - break; - - case I2C_SMBUS_WORD_DATA: - if (read_write == I2C_SMBUS_WRITE) { - chip->words[command] = data->word; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "wrote 0x%04x at 0x%02x.\n", - addr, data->word, command); - } else { - data->word = chip->words[command]; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "read 0x%04x at 0x%02x.\n", - addr, data->word, command); - } - - ret = 0; - break; - - case I2C_SMBUS_I2C_BLOCK_DATA: - len = data->block[0]; - if (read_write == I2C_SMBUS_WRITE) { - for (i = 0; i < len; i++) { - chip->words[command + i] &= 0xff00; - chip->words[command + i] |= data->block[1 + i]; - } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "wrote %d bytes at 0x%02x.\n", - addr, len, command); - } else { - for (i = 0; i < len; i++) { - data->block[1 + i] = - chip->words[command + i] & 0xff; - } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "read %d bytes at 0x%02x.\n", - addr, len, command); - } - - ret = 0; - break; - - default: - dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); - ret = -EOPNOTSUPP; - break; - } /* switch (size) */ - - return ret; -} - -static u32 stub_func(struct i2c_adapter *adapter) -{ - return STUB_FUNC & functionality; -} - -static const struct i2c_algorithm smbus_algorithm = { - .functionality = stub_func, - .smbus_xfer = stub_xfer, -}; - -static struct i2c_adapter stub_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .algo = &smbus_algorithm, - .name = "SMBus stub driver", -}; - -static int __init i2c_stub_init(void) -{ - int i, ret; - - if (!chip_addr[0]) { - printk(KERN_ERR "i2c-stub: Please specify a chip address\n"); - return -ENODEV; - } - - for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { - if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { - printk(KERN_ERR "i2c-stub: Invalid chip address " - "0x%02x\n", chip_addr[i]); - return -EINVAL; - } - - printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n", - chip_addr[i]); - } - - /* Allocate memory for all chips at once */ - stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL); - if (!stub_chips) { - printk(KERN_ERR "i2c-stub: Out of memory\n"); - return -ENOMEM; - } - - ret = i2c_add_adapter(&stub_adapter); - if (ret) - kfree(stub_chips); - return ret; -} - -static void __exit i2c_stub_exit(void) -{ - i2c_del_adapter(&stub_adapter); - kfree(stub_chips); -} - -MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); -MODULE_DESCRIPTION("I2C stub driver"); -MODULE_LICENSE("GPL"); - -module_init(i2c_stub_init); -module_exit(i2c_stub_exit); - diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index f981ac4e6783..dcea77bf6f50 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -742,7 +742,7 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) } ret = devm_request_irq(&pdev->dev, i2c_dev->irq, - tegra_i2c_isr, 0, pdev->name, i2c_dev); + tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); return ret; |