diff options
Diffstat (limited to 'drivers/ras/amd/atl/umc.c')
| -rw-r--r-- | drivers/ras/amd/atl/umc.c | 160 |
1 files changed, 114 insertions, 46 deletions
diff --git a/drivers/ras/amd/atl/umc.c b/drivers/ras/amd/atl/umc.c index 59b6169093f7..a1b4accf7b96 100644 --- a/drivers/ras/amd/atl/umc.c +++ b/drivers/ras/amd/atl/umc.c @@ -68,6 +68,8 @@ struct xor_bits { }; #define NUM_BANK_BITS 4 +#define NUM_COL_BITS 5 +#define NUM_SID_BITS 2 static struct { /* UMC::CH::AddrHashBank */ @@ -80,7 +82,22 @@ static struct { u8 bank_xor; } addr_hash; +static struct { + u8 bank[NUM_BANK_BITS]; + u8 col[NUM_COL_BITS]; + u8 sid[NUM_SID_BITS]; + u8 num_row_lo; + u8 num_row_hi; + u8 row_lo; + u8 row_hi; + u8 pc; +} bit_shifts; + #define MI300_UMC_CH_BASE 0x90000 +#define MI300_ADDR_CFG (MI300_UMC_CH_BASE + 0x30) +#define MI300_ADDR_SEL (MI300_UMC_CH_BASE + 0x40) +#define MI300_COL_SEL_LO (MI300_UMC_CH_BASE + 0x50) +#define MI300_ADDR_SEL_2 (MI300_UMC_CH_BASE + 0xA4) #define MI300_ADDR_HASH_BANK0 (MI300_UMC_CH_BASE + 0xC8) #define MI300_ADDR_HASH_PC (MI300_UMC_CH_BASE + 0xE0) #define MI300_ADDR_HASH_PC2 (MI300_UMC_CH_BASE + 0xE4) @@ -90,17 +107,42 @@ static struct { #define ADDR_HASH_ROW_XOR GENMASK(31, 14) #define ADDR_HASH_BANK_XOR GENMASK(5, 0) +#define ADDR_CFG_NUM_ROW_LO GENMASK(11, 8) +#define ADDR_CFG_NUM_ROW_HI GENMASK(15, 12) + +#define ADDR_SEL_BANK0 GENMASK(3, 0) +#define ADDR_SEL_BANK1 GENMASK(7, 4) +#define ADDR_SEL_BANK2 GENMASK(11, 8) +#define ADDR_SEL_BANK3 GENMASK(15, 12) +#define ADDR_SEL_BANK4 GENMASK(20, 16) +#define ADDR_SEL_ROW_LO GENMASK(27, 24) +#define ADDR_SEL_ROW_HI GENMASK(31, 28) + +#define COL_SEL_LO_COL0 GENMASK(3, 0) +#define COL_SEL_LO_COL1 GENMASK(7, 4) +#define COL_SEL_LO_COL2 GENMASK(11, 8) +#define COL_SEL_LO_COL3 GENMASK(15, 12) +#define COL_SEL_LO_COL4 GENMASK(19, 16) + +#define ADDR_SEL_2_BANK5 GENMASK(4, 0) +#define ADDR_SEL_2_CHAN GENMASK(15, 12) + /* * Read UMC::CH::AddrHash{Bank,PC,PC2} registers to get XOR bits used - * for hashing. Do this during module init, since the values will not - * change during run time. + * for hashing. + * + * Also, read UMC::CH::Addr{Cfg,Sel,Sel2} and UMC::CH:ColSelLo registers to + * get the values needed to reconstruct the normalized address. Apply additional + * offsets to the raw register values, as needed. + * + * Do this during module init, since the values will not change during run time. * * These registers are instantiated for each UMC across each AMD Node. * However, they should be identically programmed due to the fixed hardware * design of MI300 systems. So read the values from Node 0 UMC 0 and keep a * single global structure for simplicity. */ -int get_addr_hash_mi300(void) +int get_umc_info_mi300(void) { u32 temp; int ret; @@ -130,6 +172,44 @@ int get_addr_hash_mi300(void) addr_hash.bank_xor = FIELD_GET(ADDR_HASH_BANK_XOR, temp); + ret = amd_smn_read(0, MI300_ADDR_CFG, &temp); + if (ret) + return ret; + + bit_shifts.num_row_hi = FIELD_GET(ADDR_CFG_NUM_ROW_HI, temp); + bit_shifts.num_row_lo = 10 + FIELD_GET(ADDR_CFG_NUM_ROW_LO, temp); + + ret = amd_smn_read(0, MI300_ADDR_SEL, &temp); + if (ret) + return ret; + + bit_shifts.bank[0] = 5 + FIELD_GET(ADDR_SEL_BANK0, temp); + bit_shifts.bank[1] = 5 + FIELD_GET(ADDR_SEL_BANK1, temp); + bit_shifts.bank[2] = 5 + FIELD_GET(ADDR_SEL_BANK2, temp); + bit_shifts.bank[3] = 5 + FIELD_GET(ADDR_SEL_BANK3, temp); + /* Use BankBit4 for the SID0 position. */ + bit_shifts.sid[0] = 5 + FIELD_GET(ADDR_SEL_BANK4, temp); + bit_shifts.row_lo = 12 + FIELD_GET(ADDR_SEL_ROW_LO, temp); + bit_shifts.row_hi = 24 + FIELD_GET(ADDR_SEL_ROW_HI, temp); + + ret = amd_smn_read(0, MI300_COL_SEL_LO, &temp); + if (ret) + return ret; + + bit_shifts.col[0] = 2 + FIELD_GET(COL_SEL_LO_COL0, temp); + bit_shifts.col[1] = 2 + FIELD_GET(COL_SEL_LO_COL1, temp); + bit_shifts.col[2] = 2 + FIELD_GET(COL_SEL_LO_COL2, temp); + bit_shifts.col[3] = 2 + FIELD_GET(COL_SEL_LO_COL3, temp); + bit_shifts.col[4] = 2 + FIELD_GET(COL_SEL_LO_COL4, temp); + + ret = amd_smn_read(0, MI300_ADDR_SEL_2, &temp); + if (ret) + return ret; + + /* Use BankBit5 for the SID1 position. */ + bit_shifts.sid[1] = 5 + FIELD_GET(ADDR_SEL_2_BANK5, temp); + bit_shifts.pc = 5 + FIELD_GET(ADDR_SEL_2_CHAN, temp); + return 0; } @@ -146,9 +226,6 @@ int get_addr_hash_mi300(void) * The MCA address format is as follows: * MCA_ADDR[27:0] = {S[1:0], P[0], R[14:0], B[3:0], C[4:0], Z[0]} * - * The normalized address format is fixed in hardware and is as follows: - * NA[30:0] = {S[1:0], R[13:0], C4, B[1:0], B[3:2], C[3:2], P, C[1:0], Z[4:0]} - * * Additionally, the PC and Bank bits may be hashed. This must be accounted for before * reconstructing the normalized address. */ @@ -158,18 +235,10 @@ int get_addr_hash_mi300(void) #define MI300_UMC_MCA_PC BIT(25) #define MI300_UMC_MCA_SID GENMASK(27, 26) -#define MI300_NA_COL_1_0 GENMASK(6, 5) -#define MI300_NA_PC BIT(7) -#define MI300_NA_COL_3_2 GENMASK(9, 8) -#define MI300_NA_BANK_3_2 GENMASK(11, 10) -#define MI300_NA_BANK_1_0 GENMASK(13, 12) -#define MI300_NA_COL_4 BIT(14) -#define MI300_NA_ROW GENMASK(28, 15) -#define MI300_NA_SID GENMASK(30, 29) - static unsigned long convert_dram_to_norm_addr_mi300(unsigned long addr) { - u16 i, col, row, bank, pc, sid, temp; + u16 i, col, row, bank, pc, sid; + u32 temp; col = FIELD_GET(MI300_UMC_MCA_COL, addr); bank = FIELD_GET(MI300_UMC_MCA_BANK, addr); @@ -189,49 +258,48 @@ static unsigned long convert_dram_to_norm_addr_mi300(unsigned long addr) /* Calculate hash for PC bit. */ if (addr_hash.pc.xor_enable) { - /* Bits SID[1:0] act as Bank[6:5] for PC hash, so apply them here. */ - bank |= sid << 5; - temp = bitwise_xor_bits(col & addr_hash.pc.col_xor); temp ^= bitwise_xor_bits(row & addr_hash.pc.row_xor); - temp ^= bitwise_xor_bits(bank & addr_hash.bank_xor); + /* Bits SID[1:0] act as Bank[5:4] for PC hash, so apply them here. */ + temp ^= bitwise_xor_bits((bank | sid << NUM_BANK_BITS) & addr_hash.bank_xor); pc ^= temp; - - /* Drop SID bits for the sake of debug printing later. */ - bank &= 0x1F; } /* Reconstruct the normalized address starting with NA[4:0] = 0 */ addr = 0; - /* NA[6:5] = Column[1:0] */ - temp = col & 0x3; - addr |= FIELD_PREP(MI300_NA_COL_1_0, temp); - - /* NA[7] = PC */ - addr |= FIELD_PREP(MI300_NA_PC, pc); - - /* NA[9:8] = Column[3:2] */ - temp = (col >> 2) & 0x3; - addr |= FIELD_PREP(MI300_NA_COL_3_2, temp); + /* Column bits */ + for (i = 0; i < NUM_COL_BITS; i++) { + temp = (col >> i) & 0x1; + addr |= temp << bit_shifts.col[i]; + } - /* NA[11:10] = Bank[3:2] */ - temp = (bank >> 2) & 0x3; - addr |= FIELD_PREP(MI300_NA_BANK_3_2, temp); + /* Bank bits */ + for (i = 0; i < NUM_BANK_BITS; i++) { + temp = (bank >> i) & 0x1; + addr |= temp << bit_shifts.bank[i]; + } - /* NA[13:12] = Bank[1:0] */ - temp = bank & 0x3; - addr |= FIELD_PREP(MI300_NA_BANK_1_0, temp); + /* Row lo bits */ + for (i = 0; i < bit_shifts.num_row_lo; i++) { + temp = (row >> i) & 0x1; + addr |= temp << (i + bit_shifts.row_lo); + } - /* NA[14] = Column[4] */ - temp = (col >> 4) & 0x1; - addr |= FIELD_PREP(MI300_NA_COL_4, temp); + /* Row hi bits */ + for (i = 0; i < bit_shifts.num_row_hi; i++) { + temp = (row >> (i + bit_shifts.num_row_lo)) & 0x1; + addr |= temp << (i + bit_shifts.row_hi); + } - /* NA[28:15] = Row[13:0] */ - addr |= FIELD_PREP(MI300_NA_ROW, row); + /* PC bit */ + addr |= pc << bit_shifts.pc; - /* NA[30:29] = SID[1:0] */ - addr |= FIELD_PREP(MI300_NA_SID, sid); + /* SID bits */ + for (i = 0; i < NUM_SID_BITS; i++) { + temp = (sid >> i) & 0x1; + addr |= temp << bit_shifts.sid[i]; + } pr_debug("Addr=0x%016lx", addr); pr_debug("Bank=%u Row=%u Column=%u PC=%u SID=%u", bank, row, col, pc, sid); |