diff options
Diffstat (limited to 'drivers/scsi/smartpqi/smartpqi.h')
| -rw-r--r-- | drivers/scsi/smartpqi/smartpqi.h | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h index bed80c4c4598..35e892579773 100644 --- a/drivers/scsi/smartpqi/smartpqi.h +++ b/drivers/scsi/smartpqi/smartpqi.h @@ -343,6 +343,10 @@ struct pqi_aio_r1_path_request { struct pqi_sg_descriptor sg_descriptors[PQI_MAX_EMBEDDED_SG_DESCRIPTORS]; }; +#define PQI_DEFAULT_MAX_WRITE_RAID_5_6 (8 * 1024U) +#define PQI_DEFAULT_MAX_TRANSFER_ENCRYPTED_SAS_SATA (~0U) +#define PQI_DEFAULT_MAX_TRANSFER_ENCRYPTED_NVME (32 * 1024U) + struct pqi_aio_r56_path_request { struct pqi_iu_header header; __le16 request_id; @@ -826,13 +830,28 @@ struct pqi_config_table_firmware_features { u8 features_supported[]; /* u8 features_requested_by_host[]; */ /* u8 features_enabled[]; */ +/* The 2 fields below are only valid if the MAX_KNOWN_FEATURE bit is set. */ +/* __le16 firmware_max_known_feature; */ +/* __le16 host_max_known_feature; */ }; #define PQI_FIRMWARE_FEATURE_OFA 0 #define PQI_FIRMWARE_FEATURE_SMP 1 +#define PQI_FIRMWARE_FEATURE_MAX_KNOWN_FEATURE 2 +#define PQI_FIRMWARE_FEATURE_RAID_0_READ_BYPASS 3 +#define PQI_FIRMWARE_FEATURE_RAID_1_READ_BYPASS 4 +#define PQI_FIRMWARE_FEATURE_RAID_5_READ_BYPASS 5 +#define PQI_FIRMWARE_FEATURE_RAID_6_READ_BYPASS 6 +#define PQI_FIRMWARE_FEATURE_RAID_0_WRITE_BYPASS 7 +#define PQI_FIRMWARE_FEATURE_RAID_1_WRITE_BYPASS 8 +#define PQI_FIRMWARE_FEATURE_RAID_5_WRITE_BYPASS 9 +#define PQI_FIRMWARE_FEATURE_RAID_6_WRITE_BYPASS 10 #define PQI_FIRMWARE_FEATURE_SOFT_RESET_HANDSHAKE 11 +#define PQI_FIRMWARE_FEATURE_UNIQUE_SATA_WWN 12 #define PQI_FIRMWARE_FEATURE_RAID_IU_TIMEOUT 13 #define PQI_FIRMWARE_FEATURE_TMF_IU_TIMEOUT 14 +#define PQI_FIRMWARE_FEATURE_RAID_BYPASS_ON_ENCRYPTED_NVME 15 +#define PQI_FIRMWARE_FEATURE_MAXIMUM 15 struct pqi_config_table_debug { struct pqi_config_table_section_header header; @@ -1069,6 +1088,7 @@ struct pqi_scsi_dev { bool raid_bypass_enabled; /* RAID bypass enabled */ u32 next_bypass_group; struct raid_map *raid_map; /* RAID bypass map */ + u32 max_transfer_encrypted; struct pqi_sas_port *sas_port; struct scsi_device *sdev; @@ -1276,6 +1296,14 @@ struct pqi_ctrl_info { u8 enable_r1_writes : 1; u8 enable_r5_writes : 1; u8 enable_r6_writes : 1; + u8 lv_drive_type_mix_valid : 1; + + u8 ciss_report_log_flags; + u32 max_transfer_encrypted_sas_sata; + u32 max_transfer_encrypted_nvme; + u32 max_write_raid_5_6; + u32 max_write_raid_1_10_2drive; + u32 max_write_raid_1_10_3drive; struct list_head scsi_device_list; spinlock_t scsi_device_list_lock; @@ -1336,6 +1364,7 @@ enum pqi_ctrl_mode { #define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15 #define BMIC_READ 0x26 #define BMIC_WRITE 0x27 +#define BMIC_SENSE_FEATURE 0x61 #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64 #define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66 #define BMIC_CSMI_PASSTHRU 0x68 @@ -1355,6 +1384,19 @@ enum pqi_ctrl_mode { (((CISS_GET_LEVEL_2_BUS((lunid)) - 1) << 8) + \ CISS_GET_LEVEL_2_TARGET((lunid))) +#define LV_GET_DRIVE_TYPE_MIX(lunid) ((lunid)[6]) + +#define LV_DRIVE_TYPE_MIX_UNKNOWN 0 +#define LV_DRIVE_TYPE_MIX_NO_RESTRICTION 1 +#define LV_DRIVE_TYPE_MIX_SAS_HDD_ONLY 2 +#define LV_DRIVE_TYPE_MIX_SATA_HDD_ONLY 3 +#define LV_DRIVE_TYPE_MIX_SAS_OR_SATA_SSD_ONLY 4 +#define LV_DRIVE_TYPE_MIX_SAS_SSD_ONLY 5 +#define LV_DRIVE_TYPE_MIX_SATA_SSD_ONLY 6 +#define LV_DRIVE_TYPE_MIX_SAS_ONLY 7 +#define LV_DRIVE_TYPE_MIX_SATA_ONLY 8 +#define LV_DRIVE_TYPE_MIX_NVME_ONLY 9 + #define NO_TIMEOUT ((unsigned long) -1) #pragma pack(1) @@ -1468,6 +1510,34 @@ struct bmic_identify_physical_device { u8 padding_to_multiple_of_512[9]; }; +#define BMIC_SENSE_FEATURE_IO_PAGE 0x8 +#define BMIC_SENSE_FEATURE_IO_PAGE_AIO_SUBPAGE 0x2 + +struct bmic_sense_feature_buffer_header { + u8 page_code; + u8 subpage_code; + __le16 buffer_length; +}; + +struct bmic_sense_feature_page_header { + u8 page_code; + u8 subpage_code; + __le16 page_length; +}; + +struct bmic_sense_feature_io_page_aio_subpage { + struct bmic_sense_feature_page_header header; + u8 firmware_read_support; + u8 driver_read_support; + u8 firmware_write_support; + u8 driver_write_support; + __le16 max_transfer_encrypted_sas_sata; + __le16 max_transfer_encrypted_nvme; + __le16 max_write_raid_5_6; + __le16 max_write_raid_1_10_2drive; + __le16 max_write_raid_1_10_3drive; +}; + struct bmic_smp_request { u8 frame_type; u8 function; |