diff options
Diffstat (limited to 'drivers/staging/gma500/power.c')
| -rw-r--r-- | drivers/staging/gma500/power.c | 318 |
1 files changed, 0 insertions, 318 deletions
diff --git a/drivers/staging/gma500/power.c b/drivers/staging/gma500/power.c deleted file mode 100644 index 408257038335..000000000000 --- a/drivers/staging/gma500/power.c +++ /dev/null @@ -1,318 +0,0 @@ -/************************************************************************** - * Copyright (c) 2009-2011, Intel Corporation. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * Authors: - * Benjamin Defnet <benjamin.r.defnet@intel.com> - * Rajesh Poornachandran <rajesh.poornachandran@intel.com> - * Massively reworked - * Alan Cox <alan@linux.intel.com> - */ - -#include "power.h" -#include "psb_drv.h" -#include "psb_reg.h" -#include "psb_intel_reg.h" -#include <linux/mutex.h> -#include <linux/pm_runtime.h> - -static struct mutex power_mutex; /* Serialize power ops */ -static spinlock_t power_ctrl_lock; /* Serialize power claim */ - -/** - * gma_power_init - initialise power manager - * @dev: our device - * - * Set up for power management tracking of our hardware. - */ -void gma_power_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - /* FIXME: Move APM/OSPM base into relevant device code */ - dev_priv->apm_base = dev_priv->apm_reg & 0xffff; - dev_priv->ospm_base &= 0xffff; - - dev_priv->display_power = true; /* We start active */ - dev_priv->display_count = 0; /* Currently no users */ - dev_priv->suspended = false; /* And not suspended */ - spin_lock_init(&power_ctrl_lock); - mutex_init(&power_mutex); - - dev_priv->ops->init_pm(dev); -} - -/** - * gma_power_uninit - end power manager - * @dev: device to end for - * - * Undo the effects of gma_power_init - */ -void gma_power_uninit(struct drm_device *dev) -{ - pm_runtime_disable(&dev->pdev->dev); - pm_runtime_set_suspended(&dev->pdev->dev); -} - -/** - * gma_suspend_display - suspend the display logic - * @dev: our DRM device - * - * Suspend the display logic of the graphics interface - */ -static void gma_suspend_display(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!dev_priv->display_power) - return; - dev_priv->ops->save_regs(dev); - dev_priv->ops->power_down(dev); - dev_priv->display_power = false; -} - -/** - * gma_resume_display - resume display side logic - * - * Resume the display hardware restoring state and enabling - * as necessary. - */ -static void gma_resume_display(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - - if (dev_priv->display_power) - return; - - /* turn on the display power island */ - dev_priv->ops->power_up(dev); - dev_priv->suspended = false; - dev_priv->display_power = true; - - PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL); - pci_write_config_word(pdev, PSB_GMCH_CTRL, - dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED); - dev_priv->ops->restore_regs(dev); -} - -/** - * gma_suspend_pci - suspend PCI side - * @pdev: PCI device - * - * Perform the suspend processing on our PCI device state - */ -static void gma_suspend_pci(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - int bsm, vbt; - - if (dev_priv->suspended) - return; - - pci_save_state(pdev); - pci_read_config_dword(pdev, 0x5C, &bsm); - dev_priv->saveBSM = bsm; - pci_read_config_dword(pdev, 0xFC, &vbt); - dev_priv->saveVBT = vbt; - pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr); - pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data); - - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - - dev_priv->suspended = true; -} - -/** - * gma_resume_pci - resume helper - * @dev: our PCI device - * - * Perform the resume processing on our PCI device state - rewrite - * register state and re-enable the PCI device - */ -static bool gma_resume_pci(struct pci_dev *pdev) -{ - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - int ret; - - if (!dev_priv->suspended) - return true; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM); - pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT); - /* restoring MSI address and data in PCIx space */ - pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr); - pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data); - ret = pci_enable_device(pdev); - - if (ret != 0) - dev_err(&pdev->dev, "pci_enable failed: %d\n", ret); - else - dev_priv->suspended = false; - return !dev_priv->suspended; -} - -/** - * gma_power_suspend - bus callback for suspend - * @pdev: our PCI device - * @state: suspend type - * - * Called back by the PCI layer during a suspend of the system. We - * perform the necessary shut down steps and save enough state that - * we can undo this when resume is called. - */ -int gma_power_suspend(struct device *_dev) -{ - struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); - struct drm_device *dev = pci_get_drvdata(pdev); - struct drm_psb_private *dev_priv = dev->dev_private; - - mutex_lock(&power_mutex); - if (!dev_priv->suspended) { - if (dev_priv->display_count) { - mutex_unlock(&power_mutex); - return -EBUSY; - } - psb_irq_uninstall(dev); - gma_suspend_display(dev); - gma_suspend_pci(pdev); - } - mutex_unlock(&power_mutex); - return 0; -} - -/** - * gma_power_resume - resume power - * @pdev: PCI device - * - * Resume the PCI side of the graphics and then the displays - */ -int gma_power_resume(struct device *_dev) -{ - struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); - struct drm_device *dev = pci_get_drvdata(pdev); - - mutex_lock(&power_mutex); - gma_resume_pci(pdev); - gma_resume_display(pdev); - psb_irq_preinstall(dev); - psb_irq_postinstall(dev); - mutex_unlock(&power_mutex); - return 0; -} - -/** - * gma_power_is_on - returne true if power is on - * @dev: our DRM device - * - * Returns true if the display island power is on at this moment - */ -bool gma_power_is_on(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - return dev_priv->display_power; -} - -/** - * gma_power_begin - begin requiring power - * @dev: our DRM device - * @force_on: true to force power on - * - * Begin an action that requires the display power island is enabled. - * We refcount the islands. - */ -bool gma_power_begin(struct drm_device *dev, bool force_on) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - int ret; - unsigned long flags; - - spin_lock_irqsave(&power_ctrl_lock, flags); - /* Power already on ? */ - if (dev_priv->display_power) { - dev_priv->display_count++; - pm_runtime_get(&dev->pdev->dev); - spin_unlock_irqrestore(&power_ctrl_lock, flags); - return true; - } - if (force_on == false) - goto out_false; - - /* Ok power up needed */ - ret = gma_resume_pci(dev->pdev); - if (ret == 0) { - /* FIXME: we want to defer this for Medfield/Oaktrail */ - gma_resume_display(dev->pdev); - psb_irq_preinstall(dev); - psb_irq_postinstall(dev); - pm_runtime_get(&dev->pdev->dev); - dev_priv->display_count++; - spin_unlock_irqrestore(&power_ctrl_lock, flags); - return true; - } -out_false: - spin_unlock_irqrestore(&power_ctrl_lock, flags); - return false; -} - -/** - * gma_power_end - end use of power - * @dev: Our DRM device - * - * Indicate that one of our gma_power_begin() requested periods when - * the diplay island power is needed has completed. - */ -void gma_power_end(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long flags; - spin_lock_irqsave(&power_ctrl_lock, flags); - dev_priv->display_count--; - WARN_ON(dev_priv->display_count < 0); - spin_unlock_irqrestore(&power_ctrl_lock, flags); - pm_runtime_put(&dev->pdev->dev); -} - -int psb_runtime_suspend(struct device *dev) -{ - return gma_power_suspend(dev); -} - -int psb_runtime_resume(struct device *dev) -{ - return gma_power_resume(dev);; -} - -int psb_runtime_idle(struct device *dev) -{ - struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev)); - struct drm_psb_private *dev_priv = drmdev->dev_private; - if (dev_priv->display_count) - return 0; - else - return 1; -} |