1 files changed, 78 insertions, 126 deletions

diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 31a58e508924..05a5cc0f43ed 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -26,7 +26,8 @@
 **********************************************************************/
 #include <linux/kernel.h>
 #include <linux/ethtool.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
+
 #include <net/dst.h>
 
 #include <asm/octeon/octeon.h>
@@ -34,86 +35,12 @@
 #include "ethernet-defines.h"
 #include "octeon-ethernet.h"
 #include "ethernet-mdio.h"
+#include "ethernet-util.h"
 
 #include "cvmx-helper-board.h"
 
 #include "cvmx-smix-defs.h"
 
-DECLARE_MUTEX(mdio_sem);
-
-/**
- * Perform an MII read. Called by the generic MII routines
- *
- * @dev:      Device to perform read for
- * @phy_id:   The MII phy id
- * @location: Register location to read
- * Returns Result from the read or zero on failure
- */
-static int cvm_oct_mdio_read(struct net_device *dev, int phy_id, int location)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_rd_dat smi_rd;
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = 1;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = location;
-	cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64);
-
-	do {
-		if (!in_interrupt())
-			yield();
-		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(0));
-	} while (smi_rd.s.pending);
-
-	if (smi_rd.s.val)
-		return smi_rd.s.dat;
-	else
-		return 0;
-}
-
-static int cvm_oct_mdio_dummy_read(struct net_device *dev, int phy_id,
-				   int location)
-{
-	return 0xffff;
-}
-
-/**
- * Perform an MII write. Called by the generic MII routines
- *
- * @dev:      Device to perform write for
- * @phy_id:   The MII phy id
- * @location: Register location to write
- * @val:      Value to write
- */
-static void cvm_oct_mdio_write(struct net_device *dev, int phy_id, int location,
-			       int val)
-{
-	union cvmx_smix_cmd smi_cmd;
-	union cvmx_smix_wr_dat smi_wr;
-
-	smi_wr.u64 = 0;
-	smi_wr.s.dat = val;
-	cvmx_write_csr(CVMX_SMIX_WR_DAT(0), smi_wr.u64);
-
-	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = 0;
-	smi_cmd.s.phy_adr = phy_id;
-	smi_cmd.s.reg_adr = location;
-	cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64);
-
-	do {
-		if (!in_interrupt())
-			yield();
-		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(0));
-	} while (smi_wr.s.pending);
-}
-
-static void cvm_oct_mdio_dummy_write(struct net_device *dev, int phy_id,
-				     int location, int val)
-{
-}
-
 static void cvm_oct_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
@@ -125,49 +52,37 @@ static void cvm_oct_get_drvinfo(struct net_device *dev,
 static int cvm_oct_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int ret;
 
-	down(&mdio_sem);
-	ret = mii_ethtool_gset(&priv->mii_info, cmd);
-	up(&mdio_sem);
+	if (priv->phydev)
+		return phy_ethtool_gset(priv->phydev, cmd);
 
-	return ret;
+	return -EINVAL;
 }
 
 static int cvm_oct_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int ret;
 
-	down(&mdio_sem);
-	ret = mii_ethtool_sset(&priv->mii_info, cmd);
-	up(&mdio_sem);
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (priv->phydev)
+		return phy_ethtool_sset(priv->phydev, cmd);
 
-	return ret;
+	return -EINVAL;
 }
 
 static int cvm_oct_nway_reset(struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int ret;
 
-	down(&mdio_sem);
-	ret = mii_nway_restart(&priv->mii_info);
-	up(&mdio_sem);
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
 
-	return ret;
-}
+	if (priv->phydev)
+		return phy_start_aneg(priv->phydev);
 
-static u32 cvm_oct_get_link(struct net_device *dev)
-{
-	struct octeon_ethernet *priv = netdev_priv(dev);
-	u32 ret;
-
-	down(&mdio_sem);
-	ret = mii_link_ok(&priv->mii_info);
-	up(&mdio_sem);
-
-	return ret;
+	return -EINVAL;
 }
 
 const struct ethtool_ops cvm_oct_ethtool_ops = {
@@ -175,7 +90,7 @@ const struct ethtool_ops cvm_oct_ethtool_ops = {
 	.get_settings = cvm_oct_get_settings,
 	.set_settings = cvm_oct_set_settings,
 	.nway_reset = cvm_oct_nway_reset,
-	.get_link = cvm_oct_get_link,
+	.get_link = ethtool_op_get_link,
 	.get_sg = ethtool_op_get_sg,
 	.get_tx_csum = ethtool_op_get_tx_csum,
 };
@@ -191,41 +106,78 @@ const struct ethtool_ops cvm_oct_ethtool_ops = {
 int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	struct mii_ioctl_data *data = if_mii(rq);
-	unsigned int duplex_chg;
-	int ret;
 
-	down(&mdio_sem);
-	ret = generic_mii_ioctl(&priv->mii_info, data, cmd, &duplex_chg);
-	up(&mdio_sem);
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (!priv->phydev)
+		return -EINVAL;
+
+	return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+}
 
-	return ret;
+static void cvm_oct_adjust_link(struct net_device *dev)
+{
+	struct octeon_ethernet *priv = netdev_priv(dev);
+	cvmx_helper_link_info_t link_info;
+
+	if (priv->last_link != priv->phydev->link) {
+		priv->last_link = priv->phydev->link;
+		link_info.u64 = 0;
+		link_info.s.link_up = priv->last_link ? 1 : 0;
+		link_info.s.full_duplex = priv->phydev->duplex ? 1 : 0;
+		link_info.s.speed = priv->phydev->speed;
+		cvmx_helper_link_set( priv->port, link_info);
+		if (priv->last_link) {
+			netif_carrier_on(dev);
+			if (priv->queue != -1)
+				DEBUGPRINT("%s: %u Mbps %s duplex, "
+					   "port %2d, queue %2d\n",
+					   dev->name, priv->phydev->speed,
+					   priv->phydev->duplex ?
+						"Full" : "Half",
+					   priv->port, priv->queue);
+			else
+				DEBUGPRINT("%s: %u Mbps %s duplex, "
+					   "port %2d, POW\n",
+					   dev->name, priv->phydev->speed,
+					   priv->phydev->duplex ?
+						"Full" : "Half",
+					   priv->port);
+		} else {
+			netif_carrier_off(dev);
+			DEBUGPRINT("%s: Link down\n", dev->name);
+		}
+	}
 }
 
+
 /**
- * Setup the MDIO device structures
+ * Setup the PHY
  *
  * @dev:    Device to setup
  *
  * Returns Zero on success, negative on failure
  */
-int cvm_oct_mdio_setup_device(struct net_device *dev)
+int cvm_oct_phy_setup_device(struct net_device *dev)
 {
 	struct octeon_ethernet *priv = netdev_priv(dev);
-	int phy_id = cvmx_helper_board_get_mii_address(priv->port);
-	if (phy_id != -1) {
-		priv->mii_info.dev = dev;
-		priv->mii_info.phy_id = phy_id;
-		priv->mii_info.phy_id_mask = 0xff;
-		priv->mii_info.supports_gmii = 1;
-		priv->mii_info.reg_num_mask = 0x1f;
-		priv->mii_info.mdio_read = cvm_oct_mdio_read;
-		priv->mii_info.mdio_write = cvm_oct_mdio_write;
-	} else {
-		/* Supply dummy MDIO routines so the kernel won't crash
-		   if the user tries to read them */
-		priv->mii_info.mdio_read = cvm_oct_mdio_dummy_read;
-		priv->mii_info.mdio_write = cvm_oct_mdio_dummy_write;
+
+	int phy_addr = cvmx_helper_board_get_mii_address(priv->port);
+	if (phy_addr != -1) {
+		char phy_id[20];
+
+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", phy_addr);
+
+		priv->phydev = phy_connect(dev, phy_id, cvm_oct_adjust_link, 0,
+					PHY_INTERFACE_MODE_GMII);
+
+		if (IS_ERR(priv->phydev)) {
+			priv->phydev = NULL;
+			return -1;
+		}
+		priv->last_link = 0;
+		phy_start_aneg(priv->phydev);
 	}
 	return 0;
 }