diff options
Diffstat (limited to 'include/crypto/skcipher.h')
| -rw-r--r-- | include/crypto/skcipher.h | 309 |
1 files changed, 297 insertions, 12 deletions
diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h index 080d1ba3611d..a648ef5ce897 100644 --- a/include/crypto/skcipher.h +++ b/include/crypto/skcipher.h @@ -49,6 +49,10 @@ struct crypto_sync_skcipher { struct crypto_skcipher base; }; +struct crypto_lskcipher { + struct crypto_tfm base; +}; + /* * struct crypto_istat_cipher - statistics for cipher algorithm * @encrypt_cnt: number of encrypt requests @@ -65,6 +69,43 @@ struct crypto_istat_cipher { atomic64_t err_cnt; }; +#ifdef CONFIG_CRYPTO_STATS +#define SKCIPHER_ALG_COMMON_STAT struct crypto_istat_cipher stat; +#else +#define SKCIPHER_ALG_COMMON_STAT +#endif + +/* + * struct skcipher_alg_common - common properties of skcipher_alg + * @min_keysize: Minimum key size supported by the transformation. This is the + * smallest key length supported by this transformation algorithm. + * This must be set to one of the pre-defined values as this is + * not hardware specific. Possible values for this field can be + * found via git grep "_MIN_KEY_SIZE" include/crypto/ + * @max_keysize: Maximum key size supported by the transformation. This is the + * largest key length supported by this transformation algorithm. + * This must be set to one of the pre-defined values as this is + * not hardware specific. Possible values for this field can be + * found via git grep "_MAX_KEY_SIZE" include/crypto/ + * @ivsize: IV size applicable for transformation. The consumer must provide an + * IV of exactly that size to perform the encrypt or decrypt operation. + * @chunksize: Equal to the block size except for stream ciphers such as + * CTR where it is set to the underlying block size. + * @stat: Statistics for cipher algorithm + * @base: Definition of a generic crypto algorithm. + */ +#define SKCIPHER_ALG_COMMON { \ + unsigned int min_keysize; \ + unsigned int max_keysize; \ + unsigned int ivsize; \ + unsigned int chunksize; \ + \ + SKCIPHER_ALG_COMMON_STAT \ + \ + struct crypto_alg base; \ +} +struct skcipher_alg_common SKCIPHER_ALG_COMMON; + /** * struct skcipher_alg - symmetric key cipher definition * @min_keysize: Minimum key size supported by the transformation. This is the @@ -120,6 +161,7 @@ struct crypto_istat_cipher { * in parallel. Should be a multiple of chunksize. * @stat: Statistics for cipher algorithm * @base: Definition of a generic crypto algorithm. + * @co: see struct skcipher_alg_common * * All fields except @ivsize are mandatory and must be filled. */ @@ -131,17 +173,55 @@ struct skcipher_alg { int (*init)(struct crypto_skcipher *tfm); void (*exit)(struct crypto_skcipher *tfm); - unsigned int min_keysize; - unsigned int max_keysize; - unsigned int ivsize; - unsigned int chunksize; unsigned int walksize; -#ifdef CONFIG_CRYPTO_STATS - struct crypto_istat_cipher stat; -#endif + union { + struct SKCIPHER_ALG_COMMON; + struct skcipher_alg_common co; + }; +}; - struct crypto_alg base; +/** + * struct lskcipher_alg - linear symmetric key cipher definition + * @setkey: Set key for the transformation. This function is used to either + * program a supplied key into the hardware or store the key in the + * transformation context for programming it later. Note that this + * function does modify the transformation context. This function can + * be called multiple times during the existence of the transformation + * object, so one must make sure the key is properly reprogrammed into + * the hardware. This function is also responsible for checking the key + * length for validity. In case a software fallback was put in place in + * the @cra_init call, this function might need to use the fallback if + * the algorithm doesn't support all of the key sizes. + * @encrypt: Encrypt a number of bytes. This function is used to encrypt + * the supplied data. This function shall not modify + * the transformation context, as this function may be called + * in parallel with the same transformation object. Data + * may be left over if length is not a multiple of blocks + * and there is more to come (final == false). The number of + * left-over bytes should be returned in case of success. + * @decrypt: Decrypt a number of bytes. This is a reverse counterpart to + * @encrypt and the conditions are exactly the same. + * @init: Initialize the cryptographic transformation object. This function + * is used to initialize the cryptographic transformation object. + * This function is called only once at the instantiation time, right + * after the transformation context was allocated. + * @exit: Deinitialize the cryptographic transformation object. This is a + * counterpart to @init, used to remove various changes set in + * @init. + * @co: see struct skcipher_alg_common + */ +struct lskcipher_alg { + int (*setkey)(struct crypto_lskcipher *tfm, const u8 *key, + unsigned int keylen); + int (*encrypt)(struct crypto_lskcipher *tfm, const u8 *src, + u8 *dst, unsigned len, u8 *iv, bool final); + int (*decrypt)(struct crypto_lskcipher *tfm, const u8 *src, + u8 *dst, unsigned len, u8 *iv, bool final); + int (*init)(struct crypto_lskcipher *tfm); + void (*exit)(struct crypto_lskcipher *tfm); + + struct skcipher_alg_common co; }; #define MAX_SYNC_SKCIPHER_REQSIZE 384 @@ -213,12 +293,36 @@ struct crypto_skcipher *crypto_alloc_skcipher(const char *alg_name, struct crypto_sync_skcipher *crypto_alloc_sync_skcipher(const char *alg_name, u32 type, u32 mask); + +/** + * crypto_alloc_lskcipher() - allocate linear symmetric key cipher handle + * @alg_name: is the cra_name / name or cra_driver_name / driver name of the + * lskcipher + * @type: specifies the type of the cipher + * @mask: specifies the mask for the cipher + * + * Allocate a cipher handle for an lskcipher. The returned struct + * crypto_lskcipher is the cipher handle that is required for any subsequent + * API invocation for that lskcipher. + * + * Return: allocated cipher handle in case of success; IS_ERR() is true in case + * of an error, PTR_ERR() returns the error code. + */ +struct crypto_lskcipher *crypto_alloc_lskcipher(const char *alg_name, + u32 type, u32 mask); + static inline struct crypto_tfm *crypto_skcipher_tfm( struct crypto_skcipher *tfm) { return &tfm->base; } +static inline struct crypto_tfm *crypto_lskcipher_tfm( + struct crypto_lskcipher *tfm) +{ + return &tfm->base; +} + /** * crypto_free_skcipher() - zeroize and free cipher handle * @tfm: cipher handle to be freed @@ -236,6 +340,17 @@ static inline void crypto_free_sync_skcipher(struct crypto_sync_skcipher *tfm) } /** + * crypto_free_lskcipher() - zeroize and free cipher handle + * @tfm: cipher handle to be freed + * + * If @tfm is a NULL or error pointer, this function does nothing. + */ +static inline void crypto_free_lskcipher(struct crypto_lskcipher *tfm) +{ + crypto_destroy_tfm(tfm, crypto_lskcipher_tfm(tfm)); +} + +/** * crypto_has_skcipher() - Search for the availability of an skcipher. * @alg_name: is the cra_name / name or cra_driver_name / driver name of the * skcipher @@ -253,6 +368,19 @@ static inline const char *crypto_skcipher_driver_name( return crypto_tfm_alg_driver_name(crypto_skcipher_tfm(tfm)); } +static inline const char *crypto_lskcipher_driver_name( + struct crypto_lskcipher *tfm) +{ + return crypto_tfm_alg_driver_name(crypto_lskcipher_tfm(tfm)); +} + +static inline struct skcipher_alg_common *crypto_skcipher_alg_common( + struct crypto_skcipher *tfm) +{ + return container_of(crypto_skcipher_tfm(tfm)->__crt_alg, + struct skcipher_alg_common, base); +} + static inline struct skcipher_alg *crypto_skcipher_alg( struct crypto_skcipher *tfm) { @@ -260,11 +388,24 @@ static inline struct skcipher_alg *crypto_skcipher_alg( struct skcipher_alg, base); } +static inline struct lskcipher_alg *crypto_lskcipher_alg( + struct crypto_lskcipher *tfm) +{ + return container_of(crypto_lskcipher_tfm(tfm)->__crt_alg, + struct lskcipher_alg, co.base); +} + static inline unsigned int crypto_skcipher_alg_ivsize(struct skcipher_alg *alg) { return alg->ivsize; } +static inline unsigned int crypto_lskcipher_alg_ivsize( + struct lskcipher_alg *alg) +{ + return alg->co.ivsize; +} + /** * crypto_skcipher_ivsize() - obtain IV size * @tfm: cipher handle @@ -276,7 +417,7 @@ static inline unsigned int crypto_skcipher_alg_ivsize(struct skcipher_alg *alg) */ static inline unsigned int crypto_skcipher_ivsize(struct crypto_skcipher *tfm) { - return crypto_skcipher_alg(tfm)->ivsize; + return crypto_skcipher_alg_common(tfm)->ivsize; } static inline unsigned int crypto_sync_skcipher_ivsize( @@ -286,6 +427,21 @@ static inline unsigned int crypto_sync_skcipher_ivsize( } /** + * crypto_lskcipher_ivsize() - obtain IV size + * @tfm: cipher handle + * + * The size of the IV for the lskcipher referenced by the cipher handle is + * returned. This IV size may be zero if the cipher does not need an IV. + * + * Return: IV size in bytes + */ +static inline unsigned int crypto_lskcipher_ivsize( + struct crypto_lskcipher *tfm) +{ + return crypto_lskcipher_alg(tfm)->co.ivsize; +} + +/** * crypto_skcipher_blocksize() - obtain block size of cipher * @tfm: cipher handle * @@ -301,12 +457,34 @@ static inline unsigned int crypto_skcipher_blocksize( return crypto_tfm_alg_blocksize(crypto_skcipher_tfm(tfm)); } +/** + * crypto_lskcipher_blocksize() - obtain block size of cipher + * @tfm: cipher handle + * + * The block size for the lskcipher referenced with the cipher handle is + * returned. The caller may use that information to allocate appropriate + * memory for the data returned by the encryption or decryption operation + * + * Return: block size of cipher + */ +static inline unsigned int crypto_lskcipher_blocksize( + struct crypto_lskcipher *tfm) +{ + return crypto_tfm_alg_blocksize(crypto_lskcipher_tfm(tfm)); +} + static inline unsigned int crypto_skcipher_alg_chunksize( struct skcipher_alg *alg) { return alg->chunksize; } +static inline unsigned int crypto_lskcipher_alg_chunksize( + struct lskcipher_alg *alg) +{ + return alg->co.chunksize; +} + /** * crypto_skcipher_chunksize() - obtain chunk size * @tfm: cipher handle @@ -321,7 +499,24 @@ static inline unsigned int crypto_skcipher_alg_chunksize( static inline unsigned int crypto_skcipher_chunksize( struct crypto_skcipher *tfm) { - return crypto_skcipher_alg_chunksize(crypto_skcipher_alg(tfm)); + return crypto_skcipher_alg_common(tfm)->chunksize; +} + +/** + * crypto_lskcipher_chunksize() - obtain chunk size + * @tfm: cipher handle + * + * The block size is set to one for ciphers such as CTR. However, + * you still need to provide incremental updates in multiples of + * the underlying block size as the IV does not have sub-block + * granularity. This is known in this API as the chunk size. + * + * Return: chunk size in bytes + */ +static inline unsigned int crypto_lskcipher_chunksize( + struct crypto_lskcipher *tfm) +{ + return crypto_lskcipher_alg_chunksize(crypto_lskcipher_alg(tfm)); } static inline unsigned int crypto_sync_skcipher_blocksize( @@ -336,6 +531,12 @@ static inline unsigned int crypto_skcipher_alignmask( return crypto_tfm_alg_alignmask(crypto_skcipher_tfm(tfm)); } +static inline unsigned int crypto_lskcipher_alignmask( + struct crypto_lskcipher *tfm) +{ + return crypto_tfm_alg_alignmask(crypto_lskcipher_tfm(tfm)); +} + static inline u32 crypto_skcipher_get_flags(struct crypto_skcipher *tfm) { return crypto_tfm_get_flags(crypto_skcipher_tfm(tfm)); @@ -371,6 +572,23 @@ static inline void crypto_sync_skcipher_clear_flags( crypto_skcipher_clear_flags(&tfm->base, flags); } +static inline u32 crypto_lskcipher_get_flags(struct crypto_lskcipher *tfm) +{ + return crypto_tfm_get_flags(crypto_lskcipher_tfm(tfm)); +} + +static inline void crypto_lskcipher_set_flags(struct crypto_lskcipher *tfm, + u32 flags) +{ + crypto_tfm_set_flags(crypto_lskcipher_tfm(tfm), flags); +} + +static inline void crypto_lskcipher_clear_flags(struct crypto_lskcipher *tfm, + u32 flags) +{ + crypto_tfm_clear_flags(crypto_lskcipher_tfm(tfm), flags); +} + /** * crypto_skcipher_setkey() - set key for cipher * @tfm: cipher handle @@ -396,16 +614,47 @@ static inline int crypto_sync_skcipher_setkey(struct crypto_sync_skcipher *tfm, return crypto_skcipher_setkey(&tfm->base, key, keylen); } +/** + * crypto_lskcipher_setkey() - set key for cipher + * @tfm: cipher handle + * @key: buffer holding the key + * @keylen: length of the key in bytes + * + * The caller provided key is set for the lskcipher referenced by the cipher + * handle. + * + * Note, the key length determines the cipher type. Many block ciphers implement + * different cipher modes depending on the key size, such as AES-128 vs AES-192 + * vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128 + * is performed. + * + * Return: 0 if the setting of the key was successful; < 0 if an error occurred + */ +int crypto_lskcipher_setkey(struct crypto_lskcipher *tfm, + const u8 *key, unsigned int keylen); + static inline unsigned int crypto_skcipher_min_keysize( struct crypto_skcipher *tfm) { - return crypto_skcipher_alg(tfm)->min_keysize; + return crypto_skcipher_alg_common(tfm)->min_keysize; } static inline unsigned int crypto_skcipher_max_keysize( struct crypto_skcipher *tfm) { - return crypto_skcipher_alg(tfm)->max_keysize; + return crypto_skcipher_alg_common(tfm)->max_keysize; +} + +static inline unsigned int crypto_lskcipher_min_keysize( + struct crypto_lskcipher *tfm) +{ + return crypto_lskcipher_alg(tfm)->co.min_keysize; +} + +static inline unsigned int crypto_lskcipher_max_keysize( + struct crypto_lskcipher *tfm) +{ + return crypto_lskcipher_alg(tfm)->co.max_keysize; } /** @@ -458,6 +707,42 @@ int crypto_skcipher_encrypt(struct skcipher_request *req); int crypto_skcipher_decrypt(struct skcipher_request *req); /** + * crypto_lskcipher_encrypt() - encrypt plaintext + * @tfm: lskcipher handle + * @src: source buffer + * @dst: destination buffer + * @len: number of bytes to process + * @iv: IV for the cipher operation which must comply with the IV size defined + * by crypto_lskcipher_ivsize + * + * Encrypt plaintext data using the lskcipher handle. + * + * Return: >=0 if the cipher operation was successful, if positive + * then this many bytes have been left unprocessed; + * < 0 if an error occurred + */ +int crypto_lskcipher_encrypt(struct crypto_lskcipher *tfm, const u8 *src, + u8 *dst, unsigned len, u8 *iv); + +/** + * crypto_lskcipher_decrypt() - decrypt ciphertext + * @tfm: lskcipher handle + * @src: source buffer + * @dst: destination buffer + * @len: number of bytes to process + * @iv: IV for the cipher operation which must comply with the IV size defined + * by crypto_lskcipher_ivsize + * + * Decrypt ciphertext data using the lskcipher handle. + * + * Return: >=0 if the cipher operation was successful, if positive + * then this many bytes have been left unprocessed; + * < 0 if an error occurred + */ +int crypto_lskcipher_decrypt(struct crypto_lskcipher *tfm, const u8 *src, + u8 *dst, unsigned len, u8 *iv); + +/** * DOC: Symmetric Key Cipher Request Handle * * The skcipher_request data structure contains all pointers to data |