diff options
Diffstat (limited to 'include/linux/gpio/driver.h')
| -rw-r--r-- | include/linux/gpio/driver.h | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index b833a5f9629a..e2d05fd0e6e3 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -8,6 +8,7 @@ #include <linux/irqdomain.h> #include <linux/lockdep.h> #include <linux/pinctrl/pinctrl.h> +#include <linux/kconfig.h> struct device; struct gpio_desc; @@ -65,6 +66,23 @@ struct seq_file; * registers. * @irq_not_threaded: flag must be set if @can_sleep is set but the * IRQs don't need to be threaded + * @read_reg: reader function for generic GPIO + * @write_reg: writer function for generic GPIO + * @pin2mask: some generic GPIO controllers work with the big-endian bits + * notation, e.g. in a 8-bits register, GPIO7 is the least significant + * bit. This callback assigns the right bit mask. + * @reg_dat: data (in) register for generic GPIO + * @reg_set: output set register (out=high) for generic GPIO + * @reg_clk: output clear register (out=low) for generic GPIO + * @reg_dir: direction setting register for generic GPIO + * @bgpio_bits: number of register bits used for a generic GPIO i.e. + * <register width> * 8 + * @bgpio_lock: used to lock chip->bgpio_data. Also, this is needed to keep + * shadowed and real data registers writes together. + * @bgpio_data: shadowed data register for generic GPIO to clear/set bits + * safely. + * @bgpio_dir: shadowed direction register for generic GPIO to clear/set + * direction safely. * @irqchip: GPIO IRQ chip impl, provided by GPIO driver * @irqdomain: Interrupt translation domain; responsible for mapping * between GPIO hwirq number and linux irq number @@ -128,6 +146,20 @@ struct gpio_chip { bool can_sleep; bool irq_not_threaded; +#if IS_ENABLED(CONFIG_GPIO_GENERIC) + unsigned long (*read_reg)(void __iomem *reg); + void (*write_reg)(void __iomem *reg, unsigned long data); + unsigned long (*pin2mask)(struct gpio_chip *gc, unsigned int pin); + void __iomem *reg_dat; + void __iomem *reg_set; + void __iomem *reg_clr; + void __iomem *reg_dir; + int bgpio_bits; + spinlock_t bgpio_lock; + unsigned long bgpio_data; + unsigned long bgpio_dir; +#endif + #ifdef CONFIG_GPIOLIB_IRQCHIP /* * With CONFIG_GPIOLIB_IRQCHIP we get an irqchip inside the gpiolib @@ -188,6 +220,28 @@ static inline void *gpiochip_get_data(struct gpio_chip *chip) struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc); +#if IS_ENABLED(CONFIG_GPIO_GENERIC) + +struct bgpio_pdata { + const char *label; + int base; + int ngpio; +}; + +int bgpio_init(struct gpio_chip *gc, struct device *dev, + unsigned long sz, void __iomem *dat, void __iomem *set, + void __iomem *clr, void __iomem *dirout, void __iomem *dirin, + unsigned long flags); + +#define BGPIOF_BIG_ENDIAN BIT(0) +#define BGPIOF_UNREADABLE_REG_SET BIT(1) /* reg_set is unreadable */ +#define BGPIOF_UNREADABLE_REG_DIR BIT(2) /* reg_dir is unreadable */ +#define BGPIOF_BIG_ENDIAN_BYTE_ORDER BIT(3) +#define BGPIOF_READ_OUTPUT_REG_SET BIT(4) /* reg_set stores output value */ +#define BGPIOF_NO_OUTPUT BIT(5) /* only input */ + +#endif + #ifdef CONFIG_GPIOLIB_IRQCHIP void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip, |