summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/input
AgeCommit message (Collapse)Author
2019-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - input core allows hardware drivers to specify a [more precise] timestamp (normally taken in top half) to better track velocity of contacts - input_dev instances now support "polling" mode so that drivers could use the same object for polled and interrupt-driven operation. The plan is to convert existing drivers and retire input_polled_dev API - a new driver for the FlySky FS-iA6B RC receiver - a refresh of BU21013 touchpad driver - w90x900 keyboard and touchpad drivers are removed as the platform is gone - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: sidewinder - make array seq static const, makes object smaller Input: reset device timestamp on sync Input: bu21013_ts - switch to using standard touchscreen properties Input: bu21013_ts - switch to using MT-B (slotted) protocol Input: bu21013_ts - fix suspend when wake source Input: bu21013_ts - use interrupt from I2C client Input: bu21013_ts - remove support for platform data Input: bu21013_ts - convert to using managed resources Input: bu21013_ts - remove useless comments Input: bu21013_ts - annotate supend/resume methods as __maybe_unused Input: bu21013_ts - rename some variables Input: bu21013_ts - convert to use GPIO descriptors ARM: ux500: improve BU21013 touchpad bindings Input: i8042 - enable wakeup on a stable struct device Input: soc_button_array - use platform_device_register_resndata() Input: psmouse - drop all unneeded functions from mouse headers Input: add support for polling to input devices Input: wacom_w8001 - allocate additional space for 'phys' Input: cros_ec_keyb - add back missing mask for event_type Input: remove dev_err() usage after platform_get_irq() ...
2019-09-02Input: bu21013_ts - switch to using standard touchscreen propertiesDmitry Torokhov
This switches the driver over to the standard touchscreen properties for coordinate transformation, while keeping old bindings working as well. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - use interrupt from I2C clientDmitry Torokhov
Instead of trying to map INT GPIO to interrupt, let's use one supplied by I2C client. If there is none - bail. This will also allow us to treat INT GPIO as optional, as per the binding. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - convert to use GPIO descriptorsLinus Walleij
This driver can use GPIO descriptors rather than GPIO numbers without any problems, convert it. Name the field variables after the actual pins on the chip rather than the "reset" and "touch" names from the devicetree bindings that are vaguely inaccurate. No in-tree users pass GPIO numbers in platform data so drop this. Descriptor tables can be used to get these GPIOs from a board file if need be. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-13dt-bindings: input: Convert Allwinner LRADC to a schemaMaxime Ripard
The Allwinner SoCs have an LRADC used to report keys and supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-11Merge tag 'v5.3-rc4' into nextDmitry Torokhov
Sync up with mainline to bring in device_property_count_u32 andother newer APIs.
2019-08-09Input: ads7846 - add support for general touchscreen bindingsMarco Felsch
A few vendor specific bindings are now covered by common bindings. Let the driver parse the common bindings to make use of common inverting and swapping mechnism. Aslo make use of touchscreen_report_pos() to ensure the correct inverting-swapping order. The vendor specific properties are used as default (backward compatibility) and gets overwritten by common bindings. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-09dt-bindings: input: ads7846: fix property descriptionMarco Felsch
The ti,y-max is used for the maximum value of the Y axis. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Devicetree updates from Olof Johansson: "We continue to see a lot of new material. I've highlighted some of it below, but there's been more beyond that as well. One of the sweeping changes is that many boards have seen their ARM Mali GPU devices added to device trees, since the DRM drivers have now been merged. So, with the caveat that I have surely missed several great contributions, here's a collection of the material this time around: New SoCs: - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53) - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA) - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53) New Boards / platforms: - Aspeed BMC support for a number of new server platforms - Kontron SMARC SoM (several i.MX6 versions) - Novtech's Meerkat96 (i.MX7) - ST Micro Avenger96 board - Hardkernel ODROID-N2 (Amlogic G12B) - Purism Librem5 devkit (i.MX8MQ) - Google Cheza (Qualcomm SDM845) - Qualcomm Dragonboard 845c (Qualcomm SDM845) - Hugsun X99 TV Box (Rockchip RK3399) - Khadas Edge/Edge-V/Captain (Rockchip RK3399) Updated / expanded boards and platforms: - Renesas r7s9210 has a lot of new peripherals added - Fixes and polish for Rockchip-based Chromebooks - Amlogic G12A has a lot of peripherals added - Nvidia Jetson Nano sees various fixes and improvements, and is now at feature parity with TX1" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits) ARM: dts: gemini: Set DIR-685 SPI CS as active low ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron arm64: dts: qcom: sdm845-cheza: add initial cheza dt ARM: dts: msm8974-FP2: Add vibration motor ...
2019-06-05dt-bindings: input: sun4i-lradc-keys: Add A64 compatibleLuca Weiss
Add the A64 compatible with a fallback to the A83T compatible. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-27dt-bindings: add more optional properties for elan_i2c touchpadsBenjamin Tissoires
Some new touchpads IC are connected through PS/2 and I2C. On some of these new IC, the I2C part doesn't have all of the information available. We need to be able to forward the touchpad parameters from PS/2 and thus, we need those new optional properties. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-14Merge tag 'mfd-next-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
2019-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A few new drivers: - driver for Azoteq IQS550/572/525 touch controllers - driver for Microchip AT42QT1050 keys - driver for GPIO controllable vibrators - support for GT5663 in Goodix driver ... along with miscellaneous driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - mark expected switch fall-through Input: qt1050 - add Microchip AT42QT1050 support Input: add support for Azoteq IQS550/572/525 Input: add a driver for GPIO controllable vibrators Input: synaptics-rmi4 - fix enum_fmt Input: synaptics-rmi4 - fill initial format HID: input: add mapping for KEY_KBD_LAYOUT_NEXT Input: add KEY_KBD_LAYOUT_NEXT Input: hyperv-keyboard - add module description Input: olpc_apsp - depend on ARCH_MMP Input: sun4i-a10-lradc-keys - add support for A83T Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code Input: lpc32xx-key - add clocks property and fix DT binding example Input: i8042 - signal wakeup from atkbd/psmouse Input: goodix - add GT5663 CTP support Input: goodix - add regulators suppot Input: evdev - use struct_size() in kzalloc() and vzalloc() Input: edt-ft5x06 - convert to use SPDX identifier Input: edt-ft5x06 - enable ACPI enumeration
2019-05-10Merge tag 'ib-mfd-gpio-input-leds-power-v5.2' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Sync up with MFD tree to bring in MAX77650 PMIC driver.
2019-05-10Merge tag 'v5.1' into nextDmitry Torokhov
Sync up with mainline to bring in the latest APIs.
2019-05-08dt-bindings: input: Add DT bindings for max77650Bartosz Golaszewski
Add the DT binding document for the onkey module of max77650. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-07Input: qt1050 - add Microchip AT42QT1050 supportMarco Felsch
Add initial support for the AT42QT1050 (QT1050) device. The device supports up to five input keys, dependent on the mode. Since it adds only the initial support, the "1 to 4 keys plus Guard Channel" mode isn't supported. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-30Input: add support for Azoteq IQS550/572/525Jeff LaBundy
This patch adds support for the Azoteq IQS550/572/525 family of trackpad/touchscreen controllers. The driver has been tested with an IQS550EV02 evaluation board. A demonstration of the driver's capabilities is available here: https://youtu.be/sRNNx4XZBts Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-30Input: add a driver for GPIO controllable vibratorsLuca Weiss
Provide a simple driver for GPIO controllable vibrators. It will be used by the Fairphone 2. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-04Input: sun4i-a10-lradc-keys - add support for A83TZiping Chen
Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC, however, the A10 SoC's vref of lradc internally is divided by 2/3 and the A83T SoC's vref of lradc internally is divided by 3/4, thus add a hardware variant for it to be compatible with various devices. Signed-off-by: Ziping Chen <techping.chan@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-04Input: lpc32xx-key - add clocks property and fix DT binding exampleVladimir Zapolskiy
The keypad controller on NXP LPC32xx requires its clock gate to be open, therefore add description of the requires 'clocks' property. In addition adjust the example by adding description of required 'clocks' property and by fixing 'interrupts' property. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-03Input: goodix - add GT5663 CTP supportJagan Teki
GT5663 is capacitive touch controller with customized smart wakeup gestures. Add support for it by adding compatible and supported chip data. The chip data on GT5663 is similar to GT1151, like - config data register has 0x8050 address - config data register max len is 240 - config data checksum has 16-bit Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-03Input: goodix - add regulators suppotJagan Teki
Goodix CTP controllers require AVDD28, VDDIO regulators for power-on sequence. The delay between these regualtor operations as per Power-on Timing from datasheet[1] is 0 (T1 >= 0 usec). So, enable and disable these regulators in proper order using normal regulator functions without any delay in between. [1] GT5663 Datasheet_English_20151106_Rev.01 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - update the ili210x touchscreen driver, refreshing the code and adding support for ILI251X line - add support for st1633 to the st1232 touchscreen driver - add support for sx8650 to the the sx8654 touchscreen driver - add support for Evervision FT5726 to the edt-ft5x06 touchscreen driver - add support for gt5688 to the Goodix touchscreen driver - new vibrator driver for MSM SOCs - miscellaneous fixes for the rest of input drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits) Input: wacom_serial4 - add support for Wacom ArtPad II tablet Input: elan_i2c - add id for touchpad found in Lenovo s21e-20 Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV Input: msm-vibrator - use correct gpio header Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev' Input: i8042 - rework DT node name comparisons Input: goodix - print values in case of inconsistencies Input: goodix - refer to touchscreen.txt in device tree bindings Input: goodix - support Goodix gt5688 Input: synaptics_i2c - remove redundant spinlock Input: db9 - mark expected switch fall-through Input: qt2160 - remove redundant spinlock Input: st1232 - handle common DT bindings Input: ims-pcu - switch to using brightness_set_blocking() Input: st1232 - switch to gpiod API Input: ili210x - fetch touchscreen geometry from DT Input: msm-vibrator - tweak an error message Input: tm2-touchkey - acknowledge that setting brightness is a blocking call Input: stmfts - acknowledge that setting brightness is a blocking call Input: ili210x - switch to using devm_device_add_group() ...
2019-03-08Merge tag 'mfd-next-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add STMPE ADC Input driver - Add STMicroelectronics STPMIC1 Parent driver - Add STMicroelectronics STPMIC1 OnKey Misc driver - Add STMicroelectronics STPMIC1 Watchdog driver - Add Cirrus Logic Lochnagar Parent driver - Add TQ-Systems TQMX86 Parent driver New Device Support: - Add support for ADC to STMPE New (or moved) Functionality: - Move Lightbar functionality to its own driver; cros_ec_lightbar - Move VBC functionality to its own driver; cros_ec_vbc - Move VBC functionality to its own driver; cros_ec_vbc - Move DebugFS functionality to its own driver; cros_ec_debugfs - Move SYSFS functionality to its own driver; cros_ec_sysfs - Add support for input voltage options; tps65218 Fixes: - Use devm_* managed resources; cros_ec - Device Tree documentation; stmpe, aspeed-lpc, lochnagar - Trivial Clean-ups; stmpe - Rip out broken modular code; aat2870-core, adp5520, as3711, db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd, syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi, wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core - Kconfig fixups; INTEL_SOC_PMIC - Improve error path; sm501, sec-core - Use struct_size() helper; sm501 - Constify; at91-usart - Use pointers instead of copying data; at91-usart - Deliver proper return value; cros_ec_dev - Trivial formatting/whitespace; sec-core" * tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: mxs-lradc: Mark expected switch fall-through mfd: sec-core: Cleanup formatting to a consistent style mfd: tqmx86: IO controller with I2C, Wachdog and GPIO mfd: intel-lpss: Move linux/pm.h to the local header mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM mfd: tps68470: Drop unused MODULE_DEVICE_TABLE mfd: at91-usart: No need to copy mfd_cell in probe mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev mfd: lochnagar: Add support for the Cirrus Logic Lochnagar mfd: lochnagar: Add initial binding documentation dt-bindings: mfd: aspeed-lpc: Make parameter optional mfd: sec-core: Return gracefully instead of BUG() if device cannot match mfd: sm501: Use struct_size() in devm_kzalloc() mfd: sm501: Fix potential NULL pointer dereference mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies mfd: tps65218.c: Add input voltage options mfd: wm8400-core: Make it explicitly non-modular mfd: wm8350-core: Drop unused module infrastructure from non-modular code mfd: wm8350-i2c: Make it explicitly non-modular mfd: wm831x-core: Drop unused module infrastructure from non-modular code ...
2019-02-16Input: goodix - refer to touchscreen.txt in device tree bindingsGuido Günther
Refer to touchscreen.txt for generic touch properties. This avoids duplication and we're using the generic code to parse these in the driver. While at that add touchscreen-size-{x,y} which are respected by the driver as well. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: goodix - support Goodix gt5688Guido Günther
From what I've seen in vendor trees it's fine to treat this as gt1x¹. Tested on the Purism Librem 5 Devkit (Rocktech JH057N00900 panel). [1]: https://github.com/TadiT7/android_kernel_mtk-4.4/tree/master/drivers/input/touchscreen/mediatek/GT5688 Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: st1232 - handle common DT bindingsMatthias Fend
This is required to specify generic touchscreen properties via DT. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-15dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCsVignesh R
AM654 SoCs has ADC IP which is similar to AM335x, but without the touchscreen part. Add new compatible to handle AM654 SoCs. Also, it seems that existing compatible strings used in the kernel DTs were never documented. So, document them now. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-02-06Input: ili210x - add DT binding documentMarek Vasut
Add DT binding document for the Ilitek ILI210x and ILI251x touchscreen controllers. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: add new vibrator driver for various MSM SOCsBrian Masney
This patch adds a new vibrator driver that supports various Qualcomm MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-01Merge branches 'ib-mfd-iio-input-5.1', 'ib-mfd-input-watchdog-5.1' and ↵Lee Jones
'ib-mfd-platform-5.1' into ibs-for-mfd-merged
2019-01-28Input: sx8654 - add sx8650 supportRichard Leitner
The sx8654 and sx8650 are quite similar, therefore add support for the sx8650 within the sx8654 driver. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> [dtor: use __be16 in sx8650_irq, add missing del_timer_sync] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: sx8654 - add sx8655 and sx8656 to compatiblesRichard Leitner
As the sx865[456] share the same datasheet and differ only in the presence of a "capacitive proximity detection circuit" and a "haptics motor driver for LRA/ERM" add them to the compatbiles. As the driver doesn't implement these features it should be no problem. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: sx8654 - add reset-gpio supportRichard Leitner
The sx8654 features a NRST input which may be connected to a GPIO. Therefore add support for hard-resetting the sx8654 via this NRST. If the reset-gpio property is provided the sx8654 is resetted via NRST instead of the soft-reset via I2C. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: st1232 - add support for st1633Martin Kepplinger
Add support for the Sitronix ST1633 touchscreen controller to the st1232 driver. A protocol spec can be found here: www.ampdisplay.com/documents/pdf/AM-320480B6TZQW-TC0H.pdf Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-16dt-bindings: input: Document STPMIC1 PMIC onkeyPascal PAILLET-LME
The STPMIC1 PMIC is able to manage an onkey button. It can be configured to shut-down the power supplies on a long key-press with an adjustable duration. Signed-off-by: Pascal Paillet <p.paillet@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-16iio: adc: add STMPE ADC devicetree bindingsStefan Agner
This adds the devicetree bindings for the STMPE ADC. This also corrects a typo in st,sample-time it is rather "6 -> 124 clocks" according to the datasheet and not 144. We need to use the naming stmpe_adc in devicetree because this is given by the mfd device. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-16dt-bindings: stmpe: Reformatting parameter list and use tabs onlyPhilippe Schenker
This patch reformats the parameter list for stmpe device in a table-style so it is more clear to read. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-13Input: edt-ft5x06 - add offset support for ev-ft5726Marco Felsch
Unfortunately the evervision focaltech implementation uses two offset registers, one for the x coordinate and one for y. This patch extends the driver to handle those offset registers only for devices that support these. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Input: edt-ft5x06 - add support for Evervision FT5726Marco Felsch
Evervision displays are using different Focaltech touchscreen controllers. This commit adds the initial support for the ones using the FT5726 controller. Receiving the touch data is the same as for the GENERIC_FT but the x and y cooridnates are swapped. The main differences are the register addresses where the GAIN and THRESHOLD parameters are stored. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-13Merge tag 'v4.20' into nextDmitry Torokhov
Merge with mainline to bring in the new APIs.
2019-01-07Input: tm2-touchkey - add support for aries touchkey variantJonathan Bakker
The touchkey variant found on aries board is slighty different, it uses a fixed regulator and writes/read to the same place Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-07Input: tm2-touchkey - allow specifying custom keycodesJonathan Bakker
Not all devices use the same keycodes in the same order, so add possibility to define keycodes for buttons present on actual hardware. If keycodes property is not present, we assume that device has at least MENU and BACK keys. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-07Input: tm2-touchkey - add support for midas touchkeySimon Shields
The touchkey on midas boards is almost identical. The only real difference is that it uses the same register for both keycode and base. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support
2018-12-28Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.21 merge window.
2018-12-21Input: add official Raspberry Pi's touchscreen driverNicolas Saenz Julienne
Add's support to Raspberry Pi's 7" Touch device. Instead of using a conventional bus all information is copied into a memory mapped area by RPi's firmware. Based on the driver found in RPi's kernel repository. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-11-12Input: dt-bindings - fix a typo in file input-reset.txtDing Tao
Replace sysrq-reset-seq with keyset. Signed-off-by: Ding Tao <miyatsu@qq.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.51.1) at 2026-01-10 10:52:13 +0000