| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Have the Automatic IBRS setting check on AMD does not falsely fire in
the guest when it has been set already on the host
- Make sure cacheinfo structures memory is allocated to address a boot
NULL ptr dereference on Intel Meteor Lake which has different numbers
of subleafs in its CPUID(4) leaf
- Take care of the GDT restoring on the kexec path too, as expected by
the kernel
- Make sure SMP is not disabled when IO-APIC is disabled on the kernel
cmdline
- Add a PGD flag _PAGE_NOPTISHADOW to instruct machinery not to
propagate changes to the kernelmode page tables, to the user portion,
in PTI
- Mark Intel Lunar Lake as affected by an issue where MONITOR wakeups
can get lost and thus user-visible delays happen
- Make sure PKRU is properly restored with XRSTOR on AMD after a PRKU
write of 0 (WRPKRU) which will mark PKRU in its init state and thus
lose the actual buffer
* tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails
x86/cacheinfo: Delete global num_cache_leaves
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
x86/kexec: Restore GDT on return from ::preserve_context kexec
x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC
x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables
x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementation
x86/pkeys: Ensure updated PKRU value is XRSTOR'd
x86/pkeys: Change caller of update_pkru_in_sigframe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Restore check for node validity in arch_numa.
The rework of NUMA initialization in arch_numa dropped a check that
refused to accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes,
such configuration is rejected and kernel gracefully falls back to
dummy NUMA"
* tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch_numa: Restore nid checks before registering a memblock with a node
memblock: allow zero threshold in validate_numa_converage()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, fixing an incorrect format specifier in a log
message and adding missing cleanup of the devres data used to support
dev_get_regmap() when a device is unregistered"
* tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: detach regmap from dev on regmap_exit
regmap: Use correct format specifier for logging range errors
|
|
Commit
5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
adds functionality that architectures can use to optionally allocate and
build cacheinfo early during boot. Commit
6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
lets secondary CPUs correct (and reallocate memory) cacheinfo data if
needed.
If the early build functionality is not used and cacheinfo does not need
correction, memory for cacheinfo is never allocated. x86 does not use
the early build functionality. Consequently, during the cacheinfo CPU
hotplug callback, last_level_cache_is_valid() attempts to dereference
a NULL pointer:
BUG: kernel NULL pointer dereference, address: 0000000000000100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEPMT SMP NOPTI
CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1
RIP: 0010: last_level_cache_is_valid+0x95/0xe0a
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback
if not done earlier.
Moreover, before determining the validity of the last-level cache info,
ensure that it has been allocated. Simply checking for non-zero
cache_leaves() is not sufficient, as some architectures (e.g., Intel
processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come
online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
Fixes: 6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 6.3+
Link: https://lore.kernel.org/r/20241128002247.26726-2-ricardo.neri-calderon@linux.intel.com
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At the end of __regmap_init(), if dev is not NULL, regmap_attach_dev()
is called, which adds a devres reference to the regmap, to be able to
retrieve a dev's regmap by name using dev_get_regmap().
When calling regmap_exit, the opposite does not happen, and the
reference is kept until the dev is detached.
Add a regmap_detach_dev() function and call it in regmap_exit() to make
sure that the devres reference is not kept.
Cc: stable@vger.kernel.org
Fixes: 72b39f6f2b5a ("regmap: Implement dev_get_regmap()")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20241128130554.362486-1-demonsingur%40gmail.com
Link: https://patch.msgid.link/20241128131625.363835-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The register addresses are unsigned ints so we should use %u not %d to
log them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241127-regmap-test-high-addr-v1-1-74a48a9e0dc5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 767507654c22 ("arch_numa: switch over to numa_memblks")
significantly cleaned up the NUMA registration code, but also
dropped a significant check that was refusing to accept to
configure a memblock with an invalid nid.
On "quality hardware" such as my ThunderX machine, this results
in a kernel that dies immediately:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x431f0a10]
[ 0.000000] Linux version 6.12.0-00013-g8920d74cf8db (maz@valley-girl) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #3872 SMP PREEMPT Wed Nov 27 15:25:49 GMT 2024
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Cavium ThunderX CN88XX board
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ESRT=0xffce0ff18 SMBIOS 3.0=0xfffb0000 ACPI 2.0=0xffec60000 MEMRESERVE=0xffc905d98
[ 0.000000] esrt: Reserving ESRT space from 0x0000000ffce0ff18 to 0x0000000ffce0ff50.
[ 0.000000] earlycon: pl11 at MMIO 0x000087e024000000 (options '115200n8')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] NODE_DATA(0) allocated [mem 0xff6754580-0xff67566bf]
[ 0.000000] Unable to handle kernel paging request at virtual address 0000000000001d40
[ 0.000000] Mem abort info:
[ 0.000000] ESR = 0x0000000096000004
[ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.000000] SET = 0, FnV = 0
[ 0.000000] EA = 0, S1PTW = 0
[ 0.000000] FSC = 0x04: level 0 translation fault
[ 0.000000] Data abort info:
[ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.000000] [0000000000001d40] user address but active_mm is swapper
[ 0.000000] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.12.0-00013-g8920d74cf8db #3872
[ 0.000000] Hardware name: Cavium ThunderX CN88XX board (DT)
[ 0.000000] pstate: a00000c5 (NzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : sparse_init_nid+0x54/0x428
[ 0.000000] lr : sparse_init+0x118/0x240
[ 0.000000] sp : ffff800081da3cb0
[ 0.000000] x29: ffff800081da3cb0 x28: 0000000fedbab10c x27: 0000000000000001
[ 0.000000] x26: 0000000ffee250f8 x25: 0000000000000001 x24: ffff800082102cd0
[ 0.000000] x23: 0000000000000001 x22: 0000000000000000 x21: 00000000001fffff
[ 0.000000] x20: 0000000000000001 x19: 0000000000000000 x18: ffffffffffffffff
[ 0.000000] x17: 0000000001b00000 x16: 0000000ffd130000 x15: 0000000000000000
[ 0.000000] x14: 00000000003e0000 x13: 00000000000001c8 x12: 0000000000000014
[ 0.000000] x11: ffff800081e82860 x10: ffff8000820fb2c8 x9 : ffff8000820fb490
[ 0.000000] x8 : 0000000000ffed20 x7 : 0000000000000014 x6 : 00000000001fffff
[ 0.000000] x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000000
[ 0.000000] x2 : 0000000000000000 x1 : 0000000000000040 x0 : 0000000000000007
[ 0.000000] Call trace:
[ 0.000000] sparse_init_nid+0x54/0x428
[ 0.000000] sparse_init+0x118/0x240
[ 0.000000] bootmem_init+0x70/0x1c8
[ 0.000000] setup_arch+0x184/0x270
[ 0.000000] start_kernel+0x74/0x670
[ 0.000000] __primary_switched+0x80/0x90
[ 0.000000] Code: f865d804 d37df060 cb030000 d2800003 (b95d4084)
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
while previous kernel versions were able to recognise how brain-damaged
the machine is, and only build a fake node.
Use the memblock_validate_numa_coverage() helper to restore some sanity
and a "working" system.
Fixes: 767507654c22 ("arch_numa: switch over to numa_memblks")
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241201092702.3792845-1-maz@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to
*_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()"
* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
pmdomain: imx: Use of_property_present() for non-boolean properties
pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
pmdomain: ti-sci: Add missing of_node_put() for args.np
pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
pmdomain: mediatek: Add support for MT6735
pmdomain: qcom: rpmhpd: add support for SAR2130P
dt-bindings: power: Add binding for MediaTek MT6735 power controller
dt-bindings: power: rpmpd: Add SAR2130P compatible
OPP: Drop redundant *_opp_attach|detach_genpd()
cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
OPP: Drop redundant code in _link_required_opps()
pmdomain: core: Set the required dev for a required OPP during genpd attach
pmdomain: core: Manage the default required OPP from a separate function
PM: domains: Support required OPPs in dev_pm_domain_attach_list()
OPP: Rework _set_required_devs() to manage a single device per call
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The only real core work we've got this time around is the completion
of the transition to the new host/target naming for the core APIs,
Kconfig still needs doing but that's a lot less invasive.
Otherwise the big changes are the new drivers that have been added:
- Completion of the conversion to spi_alloc_host()/_target() and
removal of the old naming.
- Cleanups for Rockchip drivers, these brought in a new logging
helper in the driver core for warnings during probe.
- Support for configuration of the word delay via spidev_test.
- Support for AMD HID2 controllers, Apple SPI controller and Realtek
SPI-NAND controllers"
* tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits)
spi: imx: support word delay
spi: imx: pass struct spi_transfer to prepare_transfer()
spi: cs42l43: Add GPIO speaker id support to the bridge configuration
spi: Delete useless checks
spi: apple: Remove unnecessary .owner for apple_spi_driver
spi: spidev_test: add support for word delay
spi: apple: Add driver for Apple SPI controller
spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers
spi: Use of_property_present() for non-boolean properties
spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time
spi: spi-mem: rtl-snand: Correctly handle DMA transfers
spi: tegra210-quad: Avoid shift-out-of-bounds
spi: axi-spi-engine: Emit trace events for spi transfers
dt-bindings: spi: sprd,sc9860-spi: convert to YAML
spi: Replace deprecated PCI functions
spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi
spi: spi-mem: Add Realtek SPI-NAND controller
dt-bindings: spi: Add realtek,rtl9301-snand
spi: make class structs const
spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main thing for regmap this time around is some improvements of the
lockdep annotations which stop some false positives. We also have one
new helper for setting a bitmask to the same value, and several test
improvements"
* tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: provide regmap_assign_bits()
regmap: irq: Set lockdep class for hierarchical IRQ domains
regmap: maple: Provide lockdep (sub)class for maple tree's internal lock
regmap: kunit: Fix repeated test param
regcache: Improve documentation of available cache types
regmap: Specifically test writing 0 as a value to sparse caches
regmap-irq: Consistently use memset32() in regmap_irq_thread()
|
|
Mark all 'struct bin_attribute' instances as const to protect against
accidental and malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241115-b4-sysfs-const-bin_attr-group-v1-2-2c9bb12dfc48@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The alg instance should be released under the exception path, otherwise
there may be resource leak here.
To mitigate this, free the alg instance with crypto_free_shash when kmalloc
fails.
Fixes: 02fe26f25325 ("firmware_loader: Add debug message with checksum for FW file")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Link: https://lore.kernel.org/r/20241016110335.3677924-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.13
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
* tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Remove use of of_match_ptr() helper
firmware: ti_sci: add CPU latency constraint management
firmware: ti_sci: Introduce Power Management Ops
firmware: ti_sci: Add system suspend and resume call
firmware: ti_sci: Add support for querying the firmware caps
PM: QoS: Export dev_pm_qos_read_value
soc: ti: knav_qmss_queue: Drop redundant continue statement
soc: ti: knav_qmss_queue: Use IRQF_NO_AUTOEN flag in request_irq()
Link: https://lore.kernel.org/r/20241106121708.rso5wvc7wbhfi6xk@maverick
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Replace the parameter name 'con' with 'con_handle' in the docstring of
__fw_devlink_relax_cycles() to resolve the kernel-doc warning about an
excess parameter description.
Address the following warning:
./drivers/base/core.c:1994: warning: Excess function parameter 'con' description in '__fw_devlink_relax_cycles'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241107223528.3781323e@canb.auug.org.au/
Signed-off-by: Amit Vadhavana <av2082000@gmail.com>
Link: https://lore.kernel.org/r/20241111165253.16672-1-av2082000@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
class_(for_each|find)_device()
For both API class_for_each_device(const struct class *class, ...) and
class_find_device(const struct class *class, ...), their WARN() messages
prompt @class was not initialized when suffer class_to_subsys(@class)
error, but the error actually means @class was not registered, so these
warning messages are not accurate.
Fix by replacing term initialized with registered within these messages.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241105-class_fix-v1-2-80866f9994a5@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241104190342.270883-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It would make it easier to debugs issues similar to the ones
reported[1][2] recently where some devices didn't have the fwnode set.
[1] - https://lore.kernel.org/all/7b995947-4540-4b17-872e-e107adca4598@notapiano/
[2] - https://lore.kernel.org/all/20240910130019.35081-1-jonathanh@nvidia.com/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241024061347.1771063-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In attempting to optimize fw_devlink runtime, I introduced numerous cycle
detection bugs by foregoing cycle detection logic under specific
conditions. Each fix has further narrowed the conditions for optimization.
It's time to give up on these optimization attempts and just run the cycle
detection logic every time fw_devlink tries to create a device link.
The specific bug report that triggered this fix involved a supplier fwnode
that never gets a device created for it. Instead, the supplier fwnode is
represented by the device that corresponds to an ancestor fwnode.
In this case, fw_devlink didn't do any cycle detection because the cycle
detection logic is only run when a device link is created between the
devices that correspond to the actual consumer and supplier fwnodes.
With this change, fw_devlink will run cycle detection logic even when
creating SYNC_STATE_ONLY proxy device links from a device that is an
ancestor of a consumer fwnode.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Closes: https://lore.kernel.org/all/1a1ab663-d068-40fb-8c94-f0715403d276@ideasonboard.com/
Fixes: 6442d79d880c ("driver core: fw_devlink: Improve detection of overlapping cycles")
Cc: stable <stable@kernel.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241030171009.1853340-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As preparation for the constification of struct bin_attribute,
constify the arguments of the read and write callbacks.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-10-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver-core fix/revert in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The devlink class object is never modified and can be made constant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241014122849.118766-1-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move location of dpm_sysfs_wakeup_change_owner() a bit to
- Put device attribute @wakeup_last_time_ms and its show() together.
- Put two different instances of dpm_sysfs_wakeup_change_owner() together.
That will make better code layout.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241028-fix_power_sysfs-v1-1-7b2fbeb14d47@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
That file contains a local helper that returns ->info_list, just use it.
No functional changes.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20241023051118.888065-1-nik.borisov@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a misspelling of the word "specific".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/f232a09c377cbe11c81b4ab69d4e7bf016e746c8.1730282860.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core revert from Greg KH:
"Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues"
* tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Fix uevent_show() vs driver detach race"
|
|
Lockdep gives a false positive splat as it can't distinguish the lock
which is taken by different IRQ descriptors from different IRQ chips
that are organized in a way of a hierarchy:
======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W
------------------------------------------------------
modprobe/141 is trying to acquire lock:
ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90
but task is already holding lock:
ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
which lock already depends on the new lock.
-> #3 (&d->lock){+.+.}-{4:4}:
-> #2 (&desc->request_mutex){+.+.}-{4:4}:
-> #1 (ipclock){+.+.}-{4:4}:
-> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}:
Chain exists of:
intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&d->lock);
lock(&desc->request_mutex);
lock(&d->lock);
lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock);
*** DEADLOCK ***
3 locks held by modprobe/141:
#0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250
#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790
#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
Set a lockdep class when we map the IRQ so that it doesn't warn about
a lockdep bug that doesn't exist.
Fixes: 4af8be67fd99 ("regmap: Convert regmap_irq to use irq_domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241101165553.4055617-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some cases when using the maple tree register cache, the lockdep
validator might complain about invalid deadlocks:
[7.131886] Possible interrupt unsafe locking scenario:
[7.131890] CPU0 CPU1
[7.131893] ---- ----
[7.131896] lock(&mt->ma_lock);
[7.131904] local_irq_disable();
[7.131907] lock(rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock);
[7.131916] lock(&mt->ma_lock);
[7.131925] <Interrupt>
[7.131928] lock(rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock);
[7.131936]
*** DEADLOCK ***
[7.131939] no locks held by swapper/0/0.
[7.131944]
the shortest dependencies between 2nd lock and 1st lock:
[7.131950] -> (&mt->ma_lock){+.+.}-{2:2} {
[7.131966] HARDIRQ-ON-W at:
[7.131973] lock_acquire+0x200/0x330
[7.131986] _raw_spin_lock+0x50/0x70
[7.131998] regcache_maple_write+0x68/0xe0
[7.132010] regcache_write+0x6c/0x90
[7.132019] _regmap_read+0x19c/0x1d0
[7.132029] _regmap_update_bits+0xc0/0x148
[7.132038] regmap_update_bits_base+0x6c/0xa8
[7.132048] rk8xx_probe+0x22c/0x3d8
[7.132057] rk8xx_spi_probe+0x74/0x88
[7.132065] spi_probe+0xa8/0xe0
[...]
[7.132675] }
[7.132678] ... key at: [<ffff800082943c20>] __key.0+0x0/0x10
[7.132691] ... acquired at:
[7.132695] _raw_spin_lock+0x50/0x70
[7.132704] regcache_maple_write+0x68/0xe0
[7.132714] regcache_write+0x6c/0x90
[7.132724] _regmap_read+0x19c/0x1d0
[7.132732] _regmap_update_bits+0xc0/0x148
[7.132741] regmap_field_update_bits_base+0x74/0xb8
[7.132751] vop2_plane_atomic_update+0x480/0x14d8 [rockchipdrm]
[7.132820] drm_atomic_helper_commit_planes+0x1a0/0x320 [drm_kms_helper]
[...]
[7.135112] -> (rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock){-...}-{2:2} {
[7.135130] IN-HARDIRQ-W at:
[7.135136] lock_acquire+0x200/0x330
[7.135147] _raw_spin_lock_irqsave+0x6c/0x98
[7.135157] regmap_lock_spinlock+0x20/0x40
[7.135166] regmap_read+0x44/0x90
[7.135175] vop2_isr+0x90/0x290 [rockchipdrm]
[7.135225] __handle_irq_event_percpu+0x124/0x2d0
In the example above, the validator seems to get the scope of
dependencies wrong, since the regmap instance used in rk8xx-spi driver
has nothing to do with the instance from vop2.
Improve validation by sharing the regmap's lockdep class with the maple
tree's internal lock, while also providing a subclass for the latter.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20241031-regmap-maple-lockdep-fix-v2-1-06a3710f3623@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There're duplicated elements in the test param real_cache_types_list. The
second one shoulde have cache type REGCACHE_MAPLE.
Signed-off-by: Cheng-Cheng Lo <locc@google.com>
Link: https://patch.msgid.link/20241029081941.3264566-1-locc@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For the benefit of CI.
|
|
This reverts commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c.
This commit causes a regression, so revert it for now until it can come
back in a way that works for everyone.
Link: https://lore.kernel.org/all/172790598832.1168608.4519484276671503678.stgit@dwillia2-xfh.jf.intel.com/
Fixes: 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
Cc: stable <stable@kernel.org>
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Export the function dev_pm_qos_read_value(). Most other functions
mentioned in Documentation/power/pm_qos_interface.rst are already
exported, so export this one as well.
This function will be used to read the resume latency in a driver that
can also be compiled as a module.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/lkml/CAJZ5v0g1Ri_wKYppomE6RXqcZXRnX7bLOPMtsQaao0uchSfE9A@mail.gmail.com/
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-1-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The devres ftrace event logs the name of the devres node, which is often a
function name (e.g., "devm_work_drop") stringified by macros like
devm_add_action. Currently, ftrace stores this name as a string literal
address, which can become invalid when the module containing the string is
unloaded. This results in page faults when ftrace tries to access the name.
This behavior is problematic because the devres ftrace event is designed to
trace resource management throughout a device driver's lifecycle, including
during module unload. The event should be available even after the module
is unloaded to properly diagnose resource issues.
Fix the issue by copying the devres node name into the ftrace ring buffer
using __assign_str(), instead of storing just the address. This ensures
that ftrace can always access the name, even if the module is unloaded.
This change increases the memory usage for each of the ftrace entry by
12-16 bytes assuming the average devres node name is 20 bytes long,
depending on the size of const char *.
Note that this change does not affect anything unless all of following
conditions are met.
- CONFIG_DEBUG_DEVRES is enabled
- ftrace tracing is enabled
- The devres event is enabled in ftrace tracing
Fixes: 09705dcb63d2 ("devres: Enable trace events")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Keita Morisaki <keyz@google.com>
Link: https://lore.kernel.org/r/20240928125005.714781-1-keyz@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
auxiliary_find_device has been unused since commit
1c5de097bea3 ("net/mlx5: Fix mlx5_get_next_dev() peer device matching")
which was the only use since it was originally added.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20240929141112.69824-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-27-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"pmdomain core:
- Fix alloc/free in dev_pm_domain_attach|detach_list()
pmdomain providers:
- qcom: Fix the return of uninitialized variable
pmdomain consumers:
- drm/tegra/gr3d: Revert conversion to dev_pm_domain_attach|detach_list()
OPP core:
- Fix error code in dev_pm_opp_set_config()"
* tag 'pmdomain-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Fix alloc/free in dev_pm_domain_attach|detach_list()
Revert "drm/tegra: gr3d: Convert into dev_pm_domain_attach|detach_list()"
pmdomain: qcom-cpr: Fix the return of uninitialized variable
OPP: fix error code in dev_pm_opp_set_config()
|
|
In the multiple PM domain case we need platform code to specify the index
of the corresponding required OPP in DT for a device, which is what
*_opp_attach_genpd() is there to help us with.
However, attaching a device to its PM domains is in general better done
with dev_pm_domain_attach_list(). To avoid having two different ways to
manage this and to prepare for the removal of *_opp_attach_genpd(), let's
extend dev_pm_domain_attach|detach_list() to manage the required OPPs too.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-5-ulf.hansson@linaro.org
|
|
The dev_pm_domain_attach|detach_list() functions are not resource managed,
hence they should not use devm_* helpers to manage allocation/freeing of
data. Let's fix this by converting to the traditional alloc/free functions.
Fixes: 161e16a5e50a ("PM: domains: Add helper functions to attach/detach multiple PM domains")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-3-ulf.hansson@linaro.org
|
|
Some drivers can still provide their functionality to a certain extent
even when some of their resource acquisitions eventually fail. In such
cases, emitting errors isn't the desired action, but warnings should be
emitted instead.
To solve this, introduce dev_warn_probe() as a new device probe log helper,
which behaves identically as the already existing dev_err_probe(), while it
produces warnings instead of errors. The intended use is with the resources
that are actually optional for a particular driver.
While there, copyedit the kerneldoc for dev_err_probe() a bit, to simplify
its wording a bit, and reuse it as the kerneldoc for dev_warn_probe(), with
the necessary wording adjustments, of course.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Hélène Vulquin <oss@helene.moe>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2be0a28538bb2a3d1bcc91e2ca1f2d0dc09146d9.1727601608.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Since 0 can look a lot like a NULL pointer when used in a cache some clever
data structures might potentially introduce bugs specific to handling it.
Add some explicit testing of storing 0 as a value in a sparse cache, at the
minute there are no issues and this will stop any appearing in the future.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240924-regcache-zero-value-v1-1-8a1224214b52@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit 4d60cac951fd ("regmap-irq: Add no_status support") adds
an additional branch into IRQ thread handler in regmap. It wisely
chose to use memset32() as it might be optimised on some architectures
and hence give a performance benefit. At the same time the old code
continue using simple memset(). Update the old code to use memset32().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240925082726.620622-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of patches for the driver core code for 6.12-rc1.
This set is the one that caused the most delay on my side, due to lots
of last-minute reports of problems in the async shutdown feature that
was added. In the end, I've reverted all of the patches in that series
so we are back to "normal" and the patch set is being reworked for the
next merge window.
Other than the async shutdown patches that were reverted, included in
here are:
- minor driver core cleanups
- minor driver core bus and class api cleanups and simplifications
for some callbacks
- some const markings of structures
- other even more minor cleanups
All of these, including the last minute reverts, have been in
linux-next, but all of the reports of problems in linux-next were
before the reverts happened. After the reverts, all is good"
* tag 'driver-core-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
Revert "driver core: don't always lock parent in shutdown"
Revert "driver core: separate function to shutdown one device"
Revert "driver core: shut down devices asynchronously"
Revert "nvme-pci: Make driver prefer asynchronous shutdown"
Revert "driver core: fix async device shutdown hang"
driver core: fix async device shutdown hang
driver core: attribute_container: Remove unused functions
driver core: Trivially simplify ((struct device_private *)curr)->device->p to @curr
devres: Correclty strip percpu address space of devm_free_percpu() argument
driver core: Make parameter check consistent for API cluster device_(for_each|find)_child()
bus: fsl-mc: make fsl_mc_bus_type const
nvme-pci: Make driver prefer asynchronous shutdown
driver core: shut down devices asynchronously
driver core: separate function to shutdown one device
driver core: don't always lock parent in shutdown
platform: Make platform_bus_type constant
driver core: class: Check namespace relevant parameters in class_register()
driver:base:core: Adding a "Return:" line in comment for device_link_add()
drivers/base: Introduce device_match_t for device finding APIs
firmware_loader: Block path traversal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
This reverts commit ba6353748e71bd1d7e422fec2b5c2e2dfc2e3bd9.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 95dc7565253a8564911190ebd1e4ffceb4de208a.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
