| Age | Commit message (Collapse) | Author |
|---|
|
Protect the MMIO access with safe mode.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add me/pipe/queue parameters for queue reset input.
v2: fix build (Alex)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a racing condition that cp firmware modifies
MQD in reset sequence after driver updates it for
remapping. We have to wait till CP_HQD_ACTIVE becoming
false then remap the queue.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename to gfx_v11_0_kgq_init_queue() to better align with
the other naming in the file.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since the MES FW resets kernel compute queue always failed, this
may caused by the KIQ failed to process unmap KCQ. So, before MES
FW work properly that will fallback to driver executes dequeue and
resets SPI directly. Besides, rework the ring reset function and make
the busy ring type reset in each function respectively.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ring reset callbacks for gfx and compute.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When MES is enabled KIQ is not available. Return an error
when someone uses the debugfs preempt test interface in
that case.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise we can fail to drop the software mutex when
we fail to take the hardware mutex.
Fixes: 76acba7b7f12 ("drm/amdgpu/gfx11: add a mutex for the gfx semaphore")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It will be used by the queue reset code.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will be used in more places in the future so
add a mutex.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to enter safe mode before touching GC MMIO.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change condition, if (ptr == NULL) to if (!ptr)
for a better format and fix the warning.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adding NOP packets one by one in the ring
does not use the CP efficiently.
Solution:
Use CP optimization while adding NOP packet's so PFP
can discard NOP packets based on information of count
from the Header instead of fetching all NOP packets
one by one.
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: Tvrtko Ursulin <tursulin@igalia.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For the bad opcode case, it will cause CP/ME hang.
The firmware will prevent the ME side from hanging by raising a bad opcode interrupt.
And the driver needs to perform a vmid reset when receiving the interrupt.
v2: update irq naming (drop priv) (Alex)
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to handle the interrupt enables for all pipes.
v2: fix indexing (Jessie)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It should work the same for compute as well as gfx.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX11.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Certain call paths still load the SMU firmware for APUs,
which needs to be skipped.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During ip dump in gfx11 the index variable is reused but is
not reinitialized to 0 and this causes the index calculation
to be wrong and access out of bound access.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to add firmware for GC 11.5.2.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize GC 11.5.2 and set gfx hw configuration.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If any INV flags are needed, they should be executed via ACQUIRE_MEM
before INDIRECT_BUFFER.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
adev->gfx.imu.funcs could be NULL
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
refine gfx11 firmware loading
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Here since we are in reset and takes the reset_domain write side lock
already. We can't use the flush tlb helper which tries to take the read
side.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 6670142d25f3cc3166f2a6c8454acd310bf2776a.
Pierre-Eric reported problems with this on his navi33. Revert
for now until we understand what is going wrong.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Pierre-eric.Pelloux-prayer@amd.com
|
|
Fix comments and error messages to rightly represent
the information.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename the variable ip_dump_cp_queues to ip_dump_compute_queue
as it represent compute queues.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable gfx pipe1 hardware support.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set up pipe1 as a high priority queue.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use correct ref/mask for differnent gfx ring pipe. Ported from
ZhenGuo's patch for gfx10.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of all the CP GFX queues for gfx11 ipdump
to be used by devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx11 support of CP queue registers for all queues
to be used by devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of gfx11 ipdump print so devcoredump
could trigger it to dump the captured registers
in devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add general registers of gfx11 in ipdump for
devcoredump support.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1
- driver MMIO read the register to check whether write is required
- if write is required, sriov full time to use rlcg, otherwise use KIQ
v2
- include gfx v11 sriov runtime case
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to take the srbm_mutex and while we are here, use the
helper function soc21_grbm_select();
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The RB bitmap should be global active RB bitmap &
active RB bitmap based on active SA.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
set_q_mode_offs don't get cleared after GPU reset, nexting SET_Q_MODE
packet to init shadow memory will be skiped, hence there has a page fault.
[How]
VM flush is needed after GPU reset, clear set_q_mode_offs when
emitting VM flush.
Fixes: 8bc75586ea01 ("drm/amdgpu: workaround to avoid SET_Q_MODE packets v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reducing the size of ucode_prefix to 25 in the gfx_v11_0_init_microcode
function. This would ensure that the total number of characters being
written into fw_name does not exceed its size of 40.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c: In function ‘gfx_v11_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:54: warning: ‘_pfp.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:54: warning: ‘_me.bin’ directive output may be truncated writing 7 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 40
540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:70: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:25: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:54: warning: ‘_mec.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CC [M] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_clockpowergating.o
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It turned out that executing the SET_Q_MODE packet on every submission
creates to much overhead.
Implement a workaround which allows skipping the SET_Q_MODE packet if
subsequent submissions all use the same parameters.
v2: add a NULL check for ring_obj
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
First of all calculating the number of dw to patch into a
conditional execution is not something HW generation specific.
This is just standard ring buffer calculations. While at it also
reduce the BUG_ON() into WARN_ON().
Then instead of a random bit pattern use 0 as default value for
the number of dw skipped, this way it's not mandatory any more
to patch the conditional execution.
And last make the address to check a parameter of the
conditional execution instead of getting this from the ring.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize gfx 11.5.0 and set gfx hw configuration.
v2: squash in CG, PG, GFXOFF fixes (Alex)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to add firmware for GC 11.5.1
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Drop redundant parameters in function amdgpu_gfx_kiq_init_ring
to simplify the code
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
