summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2024-09-18drm/amd/display: Clear cached watermark after resumeCharlene Liu
[WHY] Driver could skip program watermarks when resume from S0i3/S4. [HOW] Clear the cached one first to make sure new value gets applied. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Update IPS default mode for DCN35/DCN351Roman Li
[WHY] RCG state of IPX in idle is more stable for DCN351 and some variants of DCN35 than IPS2. [HOW] Rework dm_get_default_ips_mode() to specify default per ASIC and update DCN35/DCN351 defaults accordingly. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Validate backlight caps are saneMario Limonciello
Currently amdgpu takes backlight caps provided by the ACPI tables on systems as is. If the firmware sets maximums that are too low this means that users don't get a good experience. To avoid having to maintain a quirk list of such systems, do a sanity check on the values. Check that the spread is at least half of the values that amdgpu would use if no ACPI table was found and if not use the amdgpu defaults. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-09-18drm/amd/display: Use full update for swizzle mode changeCharlene Liu
[WHY & HOW] 1) We did linear/non linear transition properly long ago 2) We used that path to handle SystemDisplayEnable 3) We fixed a SystemDisplayEnable inability to fallback to passive by impacting the transition flow generically 4) AFMF later relied on the generic transition behavior Separating the two flows to make (3) non-generic is the best immediate coarse of action. DC can discern SSAMPO3 very easily from SDE. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Skip to enable dsc if it has been offZhikai Zhai
[WHY] It makes DSC enable when we commit the stream which need keep power off, and then it will skip to disable DSC if pipe reset at this situation as power has been off. It may cause the DSC unexpected enable on the pipe with the next new stream which doesn't support DSC. [HOW] Check the DSC used on current pipe status when update stream. Skip to enable if it has been off. The operation enable DSC should happen when set power on. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Fix underflow when setting underscan on DCN401Aurabindo Pillai
[WHY & HOW] When underscan is set through xrandr, it causes the stream destination rect to change in a way it becomes complicated to handle the calculations for subvp. Since this is a corner case, disable subvp when underscan is set. Fix the existing check that is supposed to catch this corner case by adding a check based on the parameters in the stream Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Remove always-false branchesAlex Hung
[WHAT & HOW] req128_c is always set to false and its branch is never taken. Similarly, MacroTileSizeBytes is set to either 256 or 65535 and it is never 4096 and it's branch is not taken. Therefore, their branches are removed. This fixes 3 DEADCODE issues reported by Coverity. Acked-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Check null pointer before dereferencing seAlex Hung
[WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity. Acked-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: 3.2.300Aric Cyr
- Add HDMI DSC native YCbCr422 support - Add fullscreen only sharpening policy - Restructure dpia link training - Disable SYMCLK32_LE root clock gating - Clean up dsc blocks in accelerated mode - Block dynamic IPS2 on DCN35 for incompatible FW versions - Add debug options to change sharpen policies - Block timing sync for different output formats in pmo - Enable DML2 override_det_buffer_size_kbytes - Add dmub hpd sense callback - Emulate Display Hotplug Hang - Implement new DPCD register handling - Use SDR white level to calculate matrix coefficients - Round calculated vtotal Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Add HDMI DSC native YCbCr422 supportLeo Ma
[WHY && HOW] For some HDMI OVT timing, YCbCr422 encoding fails at the DSC bandwidth check. The root cause is our DSC policy for timing doesn't account for HDMI YCbCr422 native support. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Add fullscreen only sharpening policyRelja Vojvodic
[WHAT & HOW] Disable sharpening if not in fullscreen if this policy is selected Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Restructure dpia link trainingPeichen Huang
[WHY] We intend to consolidate dp tunneling and conventional dp link training. [HOW] 1. Use the same link training entry for both dp and dpia 2. Move SET_CONFIG of non-transparent mode to dmub side 3. Add set_tps_notification dmub_cmd to notify tps request for non-transparent dpia link training 4. Check dpcd request result and abort link training early if dpia aux tunneling fails 5. Add option to avoid affect old product 6. Separately handle wait_time_microsec for dpia Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Disable SYMCLK32_LE root clock gatingSung Joon Kim
[WHY & HOW] On display on sequence, enabling SYMCLK32_LE root clock gating causes issue in link training so disabling it is needed. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Clean up dsc blocks in accelerated modeMartin Tsai
[WHY] DSC on eDP could be enabled during VBIOS post. The enabled DSC may not be disabled when enter to OS, once the system was in second screen only mode before entering to S4. In this case, OS will not send setTimings to reset eDP path again. The enabled DSC HW will make a new stream without DSC cannot output normally if it reused this pipe with enabled DSC. [HOW] In accelerated mode, to clean up DSC blocks if eDP is on link but not active when we are not in fast boot and seamless boot. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Martin Tsai <martin.tsai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Block dynamic IPS2 on DCN35 for incompatible FW versionsNicholas Kazlauskas
[WHY] Hangs with Z8 can occur if running an older unfixed PMFW version. [HOW] Fallback to RCG only for dynamic IPS2 states if it's not newer than 93.12. Limit to DCN35. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Add debug options to change sharpen policiesSamson Tam
[WHY] Add options to change sharpen policy based on surface format and scaling ratios. [HOW] Add sharpen_policy to change policy based on surface format and scale_to_sharpness_policy based on scaling ratios. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Block timing sync for different output formats in pmoDillon Varone
[WHY & HOW] If the output format is different for HDMI TMDS signals, they are not synchronizable. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Enable DML2 override_det_buffer_size_kbytesYihan Zhu
[WHY] Corrupted screen will be observed when 4k144 DP/HDMI display and 4k144 eDP are connected, changing eDP refresh rate from 60Hz to 144Hz. [HOW] override_det_buffer_size_kbytes should be true for DCN35/DCN351. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Add dmub hpd sense callbackRoman Li
[WHY] HPD sense notification has been implemented in DMUB, which can occur during low power states and need to be notified from firmware to driver. [HOW] Define callback and register new HPD sense notification. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Emulate Display Hotplug HangDaniel Sa
[WHY] Driver reports 0 display when the virtual display is still present, and causes P-state hang in FW. [HOW] When enumerating through streams, check for active planes and use that to indicate number of displays. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Implement new DPCD register handlingRyan Seto
[WHY] There are some monitor timings that seem to be supported without DSC but actually require DSC to be displayed. A VESA SCR introduced a new max uncompressed pixel rate cap register that we can use to handle these edge cases. [HOW] SST: Read caps from link and invalidate timings that exceed the max limit but do not support DSC. Then check for options override when determining BPP. MST: Read caps from virtual DPCD peer device or daisy chained SST monitor and set validation set BPPs to max if pixel rate exceeds uncompressed limit. Validation set optimization continues as normal. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Use SDR white level to calculate matrix coefficientsSamson Tam
[WHY] Certain profiles have higher HDR multiplier than SDR white level max which is not currently supported. [HOW] Use SDR white level when calculating matrix coefficients for HDR RGB MPO path instead of HDR multiplier. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Round calculated vtotalRobin Chen
[WHY] The calculated vtotal may has 1 line deviation. To get precisely vtotal number, round the vtotal result. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: fix typo in the commentYan Zhen
Correctly spelled comments make it easier for the reader to understand the code. Replace 'maxium' with 'maximum' in the comment & replace 'diffculty' with 'difficulty' in the comment & replace 'suppluy' with 'supply' in the comment & replace 'Congiuration' with 'Configuration' in the comment & replace 'eanbled' with 'enabled' in the comment. Signed-off-by: Yan Zhen <yanzhen@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-17Merge tag 'amd-drm-next-6.12-2024-09-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-13: amdgpu: - GPUVM sync fixes - kdoc fixes - Misc spelling mistakes - Add some raven GFXOFF quirks - Use clamp helper - DC fixes - JPEG fixes - Process isolation fix - Queue reset fix - W=1 cleanup - SMU14 fixes - JPEG fixes amdkfd: - Fetch cacheline info from IP discovery - Queue reset fix - RAS fix - Document SVM events - CRIU fixes - Race fix in dma-buf handling drm: - dma-buf fd race fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240913134139.2861073-1-alexander.deucher@amd.com
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-11Merge tag 'amd-drm-next-6.12-2024-09-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-06: amdgpu: - IPS updates - Post divider fix - DML2 updates - Misc static checker fixes - DCN 3.5 fixes - Replay fixes - DMCUB updates - SWSMU fixes - DP MST fixes - Add debug flag for per queue resets - devcoredump updates - SR-IOV fixes - MES fixes - Always allocate cleared VRAM for GEM - Pipe reset for GC 9.4.3 - ODM policy fixes - Per queue reset support for GC 10 - Per queue reset support for GC 11 - Per queue reset support for GC 12 - Display flickering fixes - MPO fixes - Display sharpening updates amdkfd: - SVM fix for IH for APUs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240906211008.3072097-1-alexander.deucher@amd.com
2024-09-10drm/amd/display: Do not reset planes based on crtc zpos_changedLeo Li
[Why] drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of it's assigned planes changes zpos, or is removed/added from it. To have amdgpu_dm request a plane reset on this is too broad. For example, if only the cursor plane was moved from one crtc to another, the crtc's zpos_changed will be set to true. But that does not mean that the underlying primary plane requires a reset. [How] Narrow it down so that only the plane that has a change in zpos will require a reset. As a future TODO, we can further optimize this by only requiring a reset on z-order change. Z-order is different from z-pos, since a zpos change doesn't necessarily mean the z-ordering changed, and DC should only require a reset if the z-ordering changed. For example, the following zpos update does not change z-ordering: Plane A: zpos 2 -> 3 Plane B: zpos 1 -> 2 => Plane A is still on top of plane B: no reset needed Whereas this one does change z-ordering: Plane A: zpos 2 -> 1 Plane B: zpos 1 -> 2 => Plane A changed from on top, to below plane B: reset needed Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Add kdoc entry for 'program_isharp_1dlut' in ↵Srinivasan Shanmugam
'dpp401_dscl_program_isharp' Added a descriptor for the 'program_isharp_1dlut' parameter, which is a flag used to determine whether to program the isharp 1D LUT. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:963: warning: Function parameter or struct member 'program_isharp_1dlut' not described in 'dpp401_dscl_program_isharp' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: fix dccg root clock optimization related hangQili Lu
[Why] enable dpp rcg before we disable dppclk in hw_init cause system hang/reboot [How] we remove dccg rcg related code from init into a separate function and call it after we init pipe Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Qili Lu <qili.lu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Refactor dccg35_get_other_enabled_symclk_feNicholas Susanto
[Why] Function used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up. [How] Refactor the function to correctly return the number of FEs connected to the input BE. Also, rename it for clarity. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com> Tested-by: Christopher Snowhill <chris@kode54.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Sefa Eyeoglu <contact@scrumplex.net> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Fix spelling mistake "recompte" -> "recompute"Colin Ian King
There is a spelling mistake in a DRM_DEBUG_DRIVER message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Add missing kdoc entry for 'bs_coeffs_updated' in ↵Srinivasan Shanmugam
dpp401_dscl_program_isharp This commit addresses a missing kdoc for the 'bs_coeffs_updated' parameter in the 'dpp401_dscl_program_isharp' function. The 'bs_coeffs_updated' is a flag indicating whether the Blur and Scale Coefficients have been updated. The 'dpp401_dscl_program_isharp' function is responsible for programming the isharp, which includes setting the isharp filter, noise gain, and blur and scale coefficients. If the 'bs_coeffs_updated' flag is set to true, the function updates the blur and scale coefficients. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Tom Chung <chiahsuan.chung@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: 3.2.299Aric Cyr
This version brings along the following: - DCN35 fixes - DML2 fixes - IPS fixes - ODM fixes - Miscellaneous cleanups - MST fixes - SPL fixes Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix flickering caused by dccgHansen Dsouza
Always allow un-gating. Follow legacy workaround for repeated dppclk dto updates Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: fix graphics hang in multi-display mst caseGabe Teeger
[what] Graphics hang observed with 3 displays connected to DP2.0 mst dock. [why] There's a mismatch in dml and dc between the assignments of hpo link encoders. [how] Add a new array in dml that tracks the current mapping of HPO stream encoders to HPO link encoders in dc. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add sharpness control interfaceRelja Vojvodic
- Add interface for controlling shapness level input into DCN. - Update SPL to support custom sharpness values. - Add support for different sharpness values depending on YUV/RGB content. Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02Revert "drm/amd/display: Wait for all pending cleared before full update"Dillon Varone
This reverts commit f0b7dcf25834afd17df316367dfe5d4c890c713c. It is causing graphics hangs. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: disable sharpness if HDR Multiplier is too largeSamson Tam
[Why] Certain profiles have higher HDR multiplier than SDR boost max which is not currently supported [How] Disable sharpness for these profiles Fixes: 1b0ce903fe74 ("drm/amd/display: add improvements for text display and HDR DWM and MPO") Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add dpia debug option to control power managementMeenakshikumar Somasundaram
[Why] To provide option to dpia control power management [How] By adding disable_usb4_pm_support bit field in dpia_debug option to control dpia power management Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: re-enable Dynamic ODM policySamson Tam
[Why] Previous disable ODM policy due to underflow issue with sharpener. Issue is resolved after updating sharpening policy to apply to both windowed and fullscreen video [How] Remove sharpness check disabling Dynamic ODM policy Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Lock DC and exit IPS when changing backlightLeo Li
Backlight updates require aux and/or register access. Therefore, driver needs to disallow IPS beforehand. So, acquire the dc lock before calling into dc to update backlight - we should be doing this regardless of IPS. Then, while the lock is held, disallow IPS before calling into dc, then allow IPS afterwards (if it was previously allowed). Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: only trigger BIOS related assert for older ASICsDaniel Sa
[Why] Some asserts are always hit on startup/Pnp when they should only be used to indicate when something has gone wrong. [How] Ignore result of getting function from bios cmd table for newer asics. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix DCN35 set min dispclk logicNicholas Susanto
[Why] Setting min dispclk to 50Mhz outside clock lowering function causes unnecessary calls to SMU to lower dispclk and causes dentist hangs when there is no stream on the pipes. [How] Move the set minimum dispclk logic inside the lowering dispclk if statement. Fixes: 234441320552 ("DCN35 set min dispclk to 50Mhz") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-30Merge tag 'drm-misc-next-2024-08-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: devfs: - support device numbers up to MINORBITS limit Core Changes: ci: - increase job timeout devfs: - use XArray for minor ids displayport: - mst: GUID improvements docs: - add fixes and cleanups panic: - optionally display QR code Driver Changes: amdgpu: - faster vblank disabling - GUID improvements gm12u320 - convert to struct drm_edid host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() renesas: - rz-du: add support for RZ/G2UL plus DT bindings sti: - convert to struct drm_edid tegra: - gr3d: improve PM domain handling - convert to struct drm_edid Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box
2024-08-29drm/amd/display: Determine IPS mode by ASIC and PMFW versionsLeo Li
[Why] DCN IPS interoperates with other system idle power features, such as Zstates. On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a hard hang. We observe this on systems where the SBIOS allows Z8. Though there is a SBIOS fix, there's no guarantee that users will get it any time soon, or even install it. A workaround is needed to prevent this from rearing its head in the wild. [How] For DCN35, check the pmfw version to determine whether the SBIOS has the fix. If not, set IPS1+RCG as the deepest possible state in all cases except for s0ix and display off (DPMS). Otherwise, enable all IPS Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-29drm/amdgpu/display: Fix a mistake in revert commitFangzhi Zuo
[why] It is to fix in try_disable_dsc() due to misrevert of commit 338567d17627 ("drm/amd/display: Fix MST BW calculation Regression") [How] Fix restoring minimum compression bw by 'max_kbps', instead of native bw 'stream_kbps' Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-04-26 03:51:36 +0000