summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2024-12-02drm/amd/display: Add hblank borrowing supportChris Park
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Limit VTotal range to max hw cap minus fpDillon Varone
[WHY & HOW] Hardware does not support the VTotal to be between fp2 lines of the maximum possible VTotal, so add a capability flag to track it and apply where necessary. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Correct prefetch calculationLo-an Chen
[WHY] The minimum value of the dst_y_prefetch_equ was not correct in prefetch calculation whice causes OPTC underflow. [HOW] Add the min operation of dst_y_prefetch_equ in prefetch calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add option to retrieve detile buffer sizeSung Lee
[WHY] For better power profiling knowing the detile buffer size at a given point in time would be useful. [HOW] Add interface to retrieve detile buffer from dc state. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odmPeterson Guo
[WHY] On some cards when odm is used, the monitor will have 2 separate pipes split vertically. When compression is used on the YCbCr colour space on the second pipe to have correct colours, we need to read a pixel from the end of first pipe to accurately display colours. Hardware was programmed properly to account for this extra pixel but it was not calculated properly in software causing a split screen on some monitors. [HOW] The fix adjusts the second pipe's viewport and timings if the pixel encoding is YCbCr422 or YCbCr420. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Peterson Guo <peterson.guo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Fix programming backlight on OLED panelsMario Limonciello
commit 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") adjusted DC core to require the backlight type to be programmed in the dc link when changing brightness. This isn't initialized in amdgpu_dm for OLED panels though which broke brightness. Explicitly initialize when aux support is enabled. Reported-and-tested-by: Luke Jones <luke@ljones.dev> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792 Fixes: 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd: Sanity check the ACPI EDIDMario Limonciello
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using it is causing corruption. It's got illogical values of not specifying a digital interface. Sanity check the ACPI EDID to avoid tripping such problems. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782 Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Allow building DC with clang on LoongArchHuacai Chen
Clang on LoongArch (18+) appears to be unaffected by the bug causing excessive stack usage in calculate_bandwidth(). But when building DC_FP support the stack frame size can be as large as 2816 bytes, which causes the FRAME_WARN build warnings. So on LoongArch we allow building DC with clang, but disable DC_FP by default. The help message is also updated. Tested-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dppZicheng Qu
This commit addresses a null pointer dereference issue in hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. Fixes: 0baae6246307 ("drm/amd/display: Refactor fast update to use new HWSS build sequence") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipeZicheng Qu
This commit addresses a null pointer dereference issue in dcn20_program_pipe(). Previously, commit 8e4ed3cf1642 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe") partially fixed the null pointer dereference issue. However, in dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and plane_state is accessed again through pipe_ctx. Multiple if statements directly call attributes of plane_state, leading to potential null pointer dereference issues. This patch adds necessary null checks to ensure stability. Fixes: 8e4ed3cf1642 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: 3.2.310Aric Cyr
This version brings along the following: - DC core fixes - DCN35 fix - DCN4+ fixes - DML2 fix - New SPL features Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Remove PIPE_DTO_SRC_SEL programming from set_dtbclk_dtoOvidiu Bunea
There are cases where an OTG is remapped from driving a regular HDMI display to a DP/eDP display. There are also cases where DTBCLK needs to be enabled for HPO, but DTBCLK DTO programming may be done while OTG is still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may change the pixel clock generator source for a mapped and running OTG and cause it to hang. Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is already done in program_pixel_clk(). Additionally, make sure that program_pixel_clk sets DTBCLK DTO as source for special HDMI cases. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: allow chroma 1:1 scaling when sharpness is offSamson Tam
[Why] SPL code forces taps to 1 when ratio is 1:1 and sharpness is off But for chroma 1:1, need taps > 1 to handle cositing [How] Do not force chroma taps to 1 when ratio is 1:1 for YUV420 Remove 420_CHROMA_BYPASS mode for scaler Reviewed-by: Navid Assadian <navid.assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Populate Power Profile In Case of Early ReturnAustin Zheng
Early return possible if context has no clk_mgr. This will lead to an invalid power profile being returned which looks identical to a profile with the lowest power level. Add back logic that populated the power profile and overwrite the value if needed. Cc: stable@vger.kernel.org Fixes: d016d0dd5a57 ("drm/amd/display: Update Interface to Check UCLK DPM") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: add public taps API in SPLSamson Tam
[Why] Add public API to obtain number of taps in SPL. [How] Isolate function to calculate recout, ratios and viewport before calculating taps. Call function in both public taps API call and private scaling call. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Enable Request rate limiter during C-State on dcn401Dillon Varone
[WHY] When C-State entry is requested, the rate limiter will be disabled which can result in high contention in the DCHUB return path. [HOW] Enable the rate limiter during C-state requests to prevent contention. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Fix handling of plane refcountJoshua Aberback
[Why] The mechanism to backup and restore plane states doesn't maintain refcount, which can cause issues if the refcount of the plane changes in between backup and restore operations, such as memory leaks if the refcount was supposed to go down, or double frees / invalid memory accesses if the refcount was supposed to go up. [How] Cache and re-apply current refcount when restoring plane states. Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Ignore scalar validation failure if pipe is phantomChris Park
[Why] There are some pipe scaler validation failure when the pipe is phantom and causes crash in DML validation. Since, scalar parameters are not as important in phantom pipe and we require this plane to do successful MCLK switches, the failure condition can be ignored. [How] Ignore scalar validation failure if the pipe validation is marked as phantom pipe. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: update pipe selection policy to check head pipeYihan Zhu
[Why] No check on head pipe during the dml to dc hw mapping will allow illegal pipe usage. This will result in a wrong pipe topology to cause mpcc tree totally mess up then cause a display hang. [How] Avoid to use the pipe is head in all check and avoid ODM slice during preferred pipe check. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: remove redundant is_dsc_possible checkBhavin Sharma
Since is_dsc_possible is already checked just above, there's no need to check it again before filling out the DSC settings. Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-12Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"Alex Deucher
This reverts commit 2551b4a321a68134360b860113dd460133e856e5. This was not the root cause. Revert. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3678 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: aurabindo.pillai@amd.com Cc: hamishclaxton@gmail.com
2024-11-12drm/amd/display: Fix failure to read vram info due to static BP_RESULTHamish Claxton
The static declaration causes the check to fail. Remove it. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678 Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamish Claxton <hamishclaxton@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: aurabindo.pillai@amd.com Cc: hamishclaxton@gmail.com
2024-11-11drm/amd/display: 3.2.309Aric Cyr
This version brings along the following: - DML2 fixes - DP fixes - DPMS fix - HPD fixes - Misc cleanup - ODM fix - Replay fix - SPL fix Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-11drm/amd/display: Adjust VSDB parser for replay featureRodrigo Siqueira
At some point, the IEEE ID identification for the replay check in the AMD EDID was added. However, this check causes the following out-of-bounds issues when using KASAN: [ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu] [ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383 ... [ 27.821207] Memory state around the buggy address: [ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821243] ^ [ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821268] ================================================================== This is caused because the ID extraction happens outside of the range of the edid lenght. This commit addresses this issue by considering the amd_vsdb_block size. Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-11drm/amd/display: Remove unused codeRodrigo Siqueira
This commit removes a legacy debug_defaults_diags struct. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-11drm/amd/display: Require minimum VBlank size for stutter optimizationDillon Varone
If the nominal VBlank is too small, optimizing for stutter can cause the prefetch bandwidth to increase drasticaly, resulting in higher clock and power requirements. Only optimize if it is >3x the stutter latency. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Handle dml allocation failure to avoid crashRyan Seto
[Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Use region6 size in fw_meta_infoJinZe Xu
[Why] If driver allocated region6 size is not same as the size in firmware, dmcub won't enable region6. [How] Use region6 size in dmcub_fw_meta instead of a constant value. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: JinZe Xu <jinze.xu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Update SPL Taps Required For Integer ScalingAustin Zheng
Number of taps is incorrectly being set when integer scaling is enabled. Taps required when src_rect != dst_rect previously not considered. Perform the calculations when integer scaling is enabled. Set taps to 1 if the scaling ratio is 1:1. Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: disabling p-state checks for DCN31 and DCN314Emily Nie
[Why] IGT displays Dmesg warnings which are likely false [How] Disabling p-state checks leading to this warning for DCN31 and DCN314 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Emily Nie <Emily.Nie@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: always blank stream before disable crtcFudongwang
Garbage will show due to dig is on. So blank stream needed. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Read DP tunneling support only for DPIA endpointsAurabindo Pillai
Unconditionally reading DP tunneling support results in extraneous errors messages on certain devices. Fix this by guarding the DPCD read for DP tunneling support for USB4 DPIA endpoints. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Adding flag for forced MST blocked discoveryMeenakshikumar Somasundaram
[Why] Need a flag to force MST blocked discovery for certain branch devices. [How] Added a flag to force MST blocked discovery in struct dc_panel_patch. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Fix Panel Replay not update screen correctlyTom Chung
[Why] In certain use case such as KDE login screen, there will be no atomic commit while do the frame update. If the Panel Replay enabled, it will cause the screen not updated and looks like system hang. [How] Delay few atomic commits before enabled the Panel Replay just like PSR. Fixes: be64336307a6c ("drm/amd/display: Re-enable panel replay feature") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682 Tested-By: Corey Hickey <bugfood-c@fatooh.org> Tested-By: James Courtier-Dutton <james.dutton@gmail.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Change some variable name of psrTom Chung
Panel Replay feature may also use the same variable with PSR. Change the variable name and make it not specify for PSR. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Change parameters to fix certain compiler errorsRevalla Hari Krishna
[Why] String literals must be assigned to const char pointers. [How] By adding const keyword to fix compilation errors. Reviewed-by: Lohita Mudimela <lohita.mudimela@amd.com> Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Refactor HPD IRQ error checking flowLeon Huang
[Why] HPD error status does not cover Replay desync error status while executing autotests and CTS tests. [How] Refactor the checking flow, reporting the HPD error based on different eDP feature. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: 3.2.308Aric Cyr
This version brings along following fixes: - Prune Invalid Modes for HDMI Output - SPL Cleanup - Fix brightness level not retained over reboot - Remove inaccessible registers from DMU diagnostics Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Prune Invalid Modes For HDMI OutputFangzhi Zuo
[Why] 1. HDMI does not have 6 bpc support. Having 6 bpc pass validation does not comply with spec. 2. Validate 420 only for native HDMI, but not apply to pcon use case. 3. Current mode validation log is not readable. [how] 1. Cap 8 bpc for dp-hdmi converter. 2. Validate yuv420 for pcon use case as well, if rgb/yuv444 8bpc cannot fit into pcon bw limitation of the link from the converter to HDMI sink. 3. Add readable pixel_format and color_depth into debug log. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Implement new backlight_level_params structureKaitlyn Tse
[Why] Implement the new backlight_level_params structure as part of the VBAC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Modified existing functions to include the new backlight_level_params structure. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: [FW Promotion] Release 0.0.241.0Taimur Hassan
- Add DPCS health check - Update USB4 PHY SSC - Fix FAMS2 SubVP Close to VBlank changes - Create VESA Aux-based backlight control path - Fix PSR1 CRC error during CTS test Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Don't write DP_MSTM_CTRL after LTWayne Lin
[Why] Observe after suspend/resme, we can't light up mst monitors under specific mst hub. The reason is that driver still writes DPCD DP_MSTM_CTRL after LT. It's forbidden even we write the same value for that dpcd register. [How] We already resume the mst branch device dpcd settings during resume_mst_branch_status(). Leverage drm_dp_mst_topology_queue_probe() to only probe the topology, not calling drm_dp_mst_topology_mgr_resume() which will set DP_MSTM_CTRL as well. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Minimize wait for pending updatesIlya Bakoulin
[Why/How] Move the wait for pending updates past prepare_bandwidth if the previous update was not a full update to reduce the average time it takes to complete a full update. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: parse umc_info or vram_info based on ASICAurabindo Pillai
An upstream bug report suggests that there are production dGPUs that are older than DCN401 but still have a umc_info in VBIOS tables with the same version as expected for a DCN401 product. Hence, reading this tables should be guarded with a version check. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678 Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Remove otg w/a toggling on HPO interfacesAusef Yousof
[why&how] Adjust otg w/a disable condition to include HPO explicitly rather than assuming it is implicitly used through DP2. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Remove hw w/a toggle if on DP2/HPOAusef Yousof
[why&how] Applying a hw w/a only relevant to DIG FIFO causing corruption using HPO, do not apply the w/a if on DP2/HPO Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: SPL cleanupSamson Tam
[Why & How] Move from pointer to callback to reference callback directly Missed renaming fixpt functions with spl prefix Reviewed-by: Navid Assadian <Navid.Assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Fix brightness level not retained over rebootTom Chung
[Why] During boot up and resume the DC layer will reset the panel brightness to fix a flicker issue. It will cause the dm->actual_brightness is not the current panel brightness level. (the dm->brightness is the correct panel level) [How] Set the backlight level after do the set mode. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: d9e865826c20 ("drm/amd/display: Simplify brightness initialization") Reported-by: Mark Herbert <mark.herbert42@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3655 Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: fix asserts in SPL during bootupSamson Tam
[Why] During mode validation, there maybe modes that fail max_downscale_src_width check and scaling_quality taps are 0. This will cause an assert to trigger in spl_set_filters_data() because taps are 0. [How] Move taps calculation for non-adaptive scaling mode to separate function and call it if max_downscale_src_width fails. This will populate taps if scaling_quality taps are 0. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Remove inaccessible registers from DMU diagnosticsNicholas Kazlauskas
[Why] SEC_CNTL isn't readable by x86 and can block Z8 entry if read. [How] Remove the read. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-04-18 11:55:52 +0000