| Age | Commit message (Collapse) | Author |
|---|
|
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the CDCLK code to
use it (as much as possible at this stage).
v2: Add local 'display' variable to __intel_display_device_info_runtime_init() (Jani)
Simplify the to_intel_display(crtc_state) stuff (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Convert intel_atomic_get_{old,new}_cdclk_state() and
intel_atomic_get_{old,new}_dbuf_state() to use to_intel_display()
instead of to_i915().
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904125301.3813721-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
No point in throwing around u8 when we're dealing with
just an integer. Use a plain old boring 'int'.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-14-ville.syrjala@linux.intel.com
|
|
The current cdclk/mbus programming sequence is as follows:
1. intel_set_cdclk_pre_plane_update()
2. update_mbus_pre_enable()
3. intel_set_cdclk_post_plane_update()
when the actual mdclk/cdclk programming is postponed to
intel_set_cdclk_post_plane_update() we must keep using
the old mdclk/cdclk ratio during update_mbus_pre_enable().
This guarantees the programmed ratio matches the rest of
the hardware state (mdlk/cdclk/mbus joining).
v2: Extracted from the vblank synchronized mbus programming patch
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-12-ville.syrjala@linux.intel.com
|
|
Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.
If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.
Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.
The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.
v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use
Cc: stable@vger.kernel.org
Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
|
|
commit 64f6a5d1922b ("container_of: add container_of_const()
that preserves const-ness of the pointer") is nice. Let's use
it so that we don't accidentally cast away the const from our
state pointers.
The only thing I don't particularly like about container_of_const()
is that it still accepts void* in addition to the proper pointer
types, but that's how most other things in C work anyway so I
guess we can live with it.
And while at it rename the macro arguments to be a bit more
descriptive than just 'x'.
TODO: maybe convert *all* container_of() uses to container_of_const()?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307151810.24208-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Commit 394b4b7df9f7 ("drm/i915/lnl: Add CDCLK table") and commit
3d3696c0fed1 ("drm/i915/lnl: Start using CDCLK through PLL") started
adding support for CDCLK programming support for Xe2LPD. One final piece
is missing, which is the programming necessary for changed in the ratio
between MDCLK and CDCLK. Let's do that now.
BSpec instructs us to update MBUS_CTL and DBUF_CTL_S* registers when the
ratio between MDCLK and CDCLK changes. The updates must be done before
changing the CDCLK when decreasing the frequency; or after it when
increasing the frequency.
Ratio-related updates to MBUS_CTL also depend on the state of MBus
joining, so they are performed by either CDCLK change sequence or by
changes in MBus joining. Since one might happen independently of the
other, we need to make sure that both logics see the necessary state
values when programming that register. MBus joining logic needs to know
the MDCLK:CDCLK ratio and that's already provided via mdclk_cdclk_ratio
field of struct intel_dbuf_state.
For the CDCLK logic, we need to have something similar: we need to
propagate the status of MBus joining to struct intel_cdclk_state. Do
that by adding the field joined_mbus to struct intel_cdclk_config.
(Preferably, that field would be added to intel_cdclk_state, however
currently only intel_cdclk_config is passed down to the functions that
do the register programming. We might revisit this decision if we find
that refactoring the code to pass the whole intel_cdclk_state is worth
it.)
Bspec: 68864, 68868, 69090, 69482
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-7-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Xe2LPD always selects the CDCLK PLL as source for the MDCLK. Because of
that, the ratio between MDCLK and CDCLK is not be constant anymore. As
such, make sure to have the current ratio available in intel_dbuf_state
so that it can be used during dbuf programming.
Note that we write-lock the global state instead of serializing to a
hardware commit because a change in the ratio should be rather handled
in the CDCLK change sequence, which will need to take care of updating
the necessary registers in that case. We will implement that in upcoming
changes.
That said, changes in the MBus joining state should be handled by the
DBUF/MBUS logic, just like it is already done, but the logic will need
to know the ratio to properly update the registers.
v2:
- Make first sentence of commit message more intelligible. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-6-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Looks like the name and description of intel_cdclk_needs_modeset()
became inaccurate as of commit 59f9e9cab3a1 ("drm/i915: Skip modeset for
cdclk changes if possible"), when it became possible to update the cdclk
without requiring disabling the pipes when only changing the cd2x
divider was enough.
Later on we also added the same type of support with squash and crawling
with commit 25e0e5ae5610 ("drm/i915/display: Do both crawl and squash
when changing cdclk"), commit d4a23930490d ("drm/i915: Allow cdclk
squasher to be reconfigured live") and commit d62686ba3b54
("drm/i915/adl_p: CDCLK crawl support for ADL").
As such, update that function's name and documentation to something more
appropriate, since the real checks for requiring modeset are done
elsewhere.
v2:
- Rename to intel_cdclk_clock_changed instead of
intel_cdclk_params_changed. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214202719.298407-2-gustavo.sousa@intel.com
|
|
Instead of mixing display & non-display stuff together, move
display specific clock info to new debugfs. This patch will
create a new debugfs "i915_cdclk_info" to expose Current & Max
cdclk and Max pixel clock frequency info.
Example:
$ cat /sys/kernel/debug/dri/0/i915_cdclk_info
Current CD clock frequency: 163200 kHz
Max CD clock frequency: 652800 kHz
Max pixel clock frequency: 1305600 kHz
V2: - s/i915_display_clock_info/i915_cdclk_info/ (Jani)
- Move the logic to intel_cdclk.c (Jani)
- Don't remove info from i915_frequency_info (Jani)
V3: - Drop locking (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413114502.1105288-1-bhanuprakash.modem@intel.com
|
|
Move a handful of key enums to a new file intel_display_limits.h. These
are the enum types, and the MAX/NUM enumerations within them, that are
used in other headers. Otherwise, there's no common theme between them.
Replace intel_display.h include with intel_display_limit.h where
relevant, and add the intel_display.h include directly in the .c files
where needed.
Since intel_display.h is used almost everywhere in display/, include it
from intel_display_types.h to avoid massive changes across the
board. There are very few files that would need intel_display_types.h
but not intel_display.h so this is neglible, and further cleanup between
these headers can be left for the future.
Overall this change drops the direct and indirect dependencies on
intel_display.h from about 300 to about 100 compilation units, because
we can drop the include from i915_drv.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116164644.1752009-1-jani.nikula@intel.com
|
|
Move display cdclk related members under drm_i915_private display
sub-struct.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7df23655be5dc70fb1a2b43ce41e1682e40395d8.1661779055.git.jani.nikula@intel.com
|
|
Make the dbuf bandwidth min cdclk calculations match the spec
more closely. Supposedly the arbiter can only guarantee an equal
share of the total bandwidth of the slice to each active plane
on that slice. So we take the max bandwidth of any of the planes
on each slice and multiply that by the number of active planes
on the slice to get a worst case estimate on how much bandwidth
we require.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Gather some intel_dump_cdclk_config() changes together to avoid extra
churn: Rename to intel_cdclk_dump_config() to following naming
conventions. Pass in i915. Use i915 for struct drm_device based
logging. Switch to KMS drm debug class.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80469a83a74912ad69c4518d9cc68f07d65e9aaf.1642769982.git.jani.nikula@intel.com
|
|
intel_cdclk.h only needs i915_drv.h for struct intel_cdclk_config. Move
the definition to intel_cdclk.h and turn the includes around to avoid
including i915_drv.h from other headers.
The intel cdclk state macros in intel_cdclk.h still reference struct
drm_i915_private, but as macros they don't strictly require the
definition until they are used.
v2: Expand on the commit message wrt cdclk state macros
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-1-jani.nikula@intel.com
|
|
The definition is not needed outside of intel_cdclk.c.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7e7e7fb91eae2b49a0ab5d982a235cec34e3320.1639068649.git.jani.nikula@intel.com
|
|
Rename to intel_cdclk_atomic_check() and make
intel_cdclk_bw_calc_min_cdclk() static.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/43ad4d437121f43d76c790ac5d4d131743d58988.1639068649.git.jani.nikula@intel.com
|
|
For CD clock squashing method, we need to define corresponding CD clock table for
reference clocks, dividers and ratios for all CD clock options.
BSpec: 54034
v2: Add CD squashing waveforms as part of CD clock table (Ville)
v3: Waveform is 16 bits wide (Ville)
[v4: vsyrjala: Nuke the non-squasher based table,
Set .divider=2 for consistency,
Pack intel_cdclk_vals a bit nicer]
v5: Fix error in waveform value (Swati)
v6 (Lucas): Rebase on upstream
v7 (MattR): Drop 40.8, 81.6, and 122.4 MHz frequencies to reflect new
bspec update.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-2-mika.kahola@intel.com
|
|
This adds wrappers around all the vtable callers so they are in
one place.
Suggested by Jani.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3dd7aaad039e76acde9dda7211468907aa657c0.1632869550.git.jani.nikula@intel.com
|
|
Since we now have proper old and new cdclk state we no longer
need to keep this flag to indicate that the force min cdclk has
changed. Instead just check if the old vs. new value are different.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
There's a pointless hole in struct intel_cdclk_vals, get rid of it.
Fortunately we already use named initializers so the order does not
matter.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Read the rawclk_freq during runtime info probing, prior to its first use
in computing the CS timestamp frequency. Then store it in the runtime
info, and include it in the debug printouts.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/834
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216163445.555786-1-chris@chris-wilson.co.uk
|
|
Let's add a copy of the active_pipes bitmask into the cdclk_state.
While this is duplicating a bit of information we may already
have elsewhere, I think it's worth it to decopule the cdclk stuff
from whatever else wants to use that bitmask. Also we want to get
rid of all the old ad-hoc global state which is what the current
bitmask is, so this removes one obstacle.
The one extra thing we have to remember is write locking the cdclk
state whenever the bitmask changes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-19-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Let's convert cdclk_state to be a proper global state. That allows
us to use the regular atomic old vs. new state accessor, hopefully
making the code less confusing.
We do have to deal with a few more error cases in case the cdclk
state duplication fails. But so be it.
v2: Fix new plane min_cdclk vs. old crtc min_cdclk check
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121140353.25997-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Give the cdclk init/uninit functions a _hw suffix to make
it clear they are about initializing the actual hardware.
I'll be wanting to to add a intel_cdclk_init() which is
purely initializing software structures.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Move all the old vs. new state shenanigans
into intel_set_cdclk_{pre,post}_plane_update() so that the caller
doesn't need to know any of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-9-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
I want to have a higher level cdclk state object so let's rename
the current lower level thing to cdclk_config (because I lack
imagination).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Move the min_cdclk[] and min_voltage_level[] arrays under the
rest of the cdclk state. And while at it provide a simple
helper (intel_cdclk_clear_state()) to clear the state during
the ww_mutex backoff dance.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Exfiltrate the cdclk code from intel_modeset_checks() into
intel_modeset_calc_cdclk().
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-4-ville.syrjala@linux.intel.com
|
|
The bspec lays out legal cdclk frequencies, PLL ratios, and CD2X
dividers in an easy-to-read table for most recent platforms. We've been
translating the data from that table into platform-specific code logic,
but it's easy to overlook an area we need to update when adding new
cdclk values or enabling new platforms. Let's just add a form of the
bspec table to the code and then adjust our functions to pull what they
need directly out of the table.
v2: Fix comparison when finding best cdclk.
v3: Another logic fix for calc_cdclk.
v4:
- Use named initializers for cdclk tables. (Ville)
- Include refclk as a field in the table instead of adding all three
ratios for each entry. (Ville)
- Terminate tables with an empty entry to avoid needing to store the
table size. (Ville)
- Don't try so hard to return reasonable values from our lookup
functions if we get impossible inputs; just WARN and return 0.
(Ville)
- Keep a bxt_ prefix on the lookup functions since they're still only
used on bxt+ for now. We can rename them later if we extend this
table-based approach back to older platforms. (Ville)
v5:
- Fix cnl table's ratios for 24mhz refclk. (Ville)
- Don't miss the named initializers on the cnl table. (Ville)
- Represent refclk in table as u16 rather than u32. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910161506.7158-1-matthew.d.roper@intel.com
|
|
Now that we have a new subdirectory for display code, continue by moving
modesetting core code.
display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.
v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
|
