| Age | Commit message (Collapse) | Author |
|---|
|
Currently, even though there is a bit to control FEC enable/disable
individually, the FEC Decode Enable sequence is sent by the SOC only
once TRANS_CONF enable is set. This ties the FEC enabling too tightly
to modeset and therefore cannot be re-issued (in case of failure)
without a modeset.
From PTL, FEC_DECODE_EN sequence can be sent to a DPRX independent
of TRANS_CONF enable. This allows us to re-issue an FEC_DECODE_EN
sequence without a modeset. Hence allowing us to have a retry
mechanism in case the DPRX does not respond with an FEC_ENABLE
within certain amount of time.
While at it, replace struct drm_i915_private with struct intel_display
v4:
- More code refactor [Jani]
- use struct intel_display [Jani]
- Optimize logging [Jani]
v3:
- Make the commit message more legible [Jani]
- Refactor code to re-use existing code [Jani]
- Do away with platform dependent FEC enable checks [Jani]
v2:
- Refactor code to avoid duplication and improve readability [Jani]
- In case of PTL, wait for FEC status directly after FEC enable [Srikanth]
- Wait for FEC_ENABLE_LIVE_STATUS to be cleared before
re-enabling FEC [Srikanth]
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024061002.4085137-1-chaitanya.kumar.borah@intel.com
|
|
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_bios.[ch] to struct intel_display.
Do one drive-by conversion of unnecessary hex usage to decimal.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0d0261a53aff5f141b16b482222a5ffce78e176e.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Drop the redundant dev_priv parameters from
intel_ddi_compute_min_voltage_level() to make life easier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128115138.13238-9-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
As required by the DP standard wait for the sink to detect the FEC
decode enabling symbol sent by the source.
There is a difference between SST and MST when the source enables
the FEC encoding: on SST this happens only after enabling the
transcoder, whereas on MST it happens already after enabling the
transcoder function (before enabling the transcoder). Wait for the
detected status at the earliest spot accordingly.
v2:
- Wait for the FEC detected status on SST after the transcoder is
enabled.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-20-imre.deak@intel.com
|
|
We have the same code to determine the CHICKEN_TRANS register
offset sprinkled in a dozen places. Hoover it up into a small
helper.
TODO: find a better home for this
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231101114212.9345-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Try to deal with duplicate child devices for the same DDI port
by attempting to initialize them in VBT defined order The first
on to succeed for a specific DDI port will be the one we use.
We'll also get rid of i915->display.vbt.ports[] here as any conflicts
will now be handled at encoder registration time rather than during
VBT parsing. Note that intel_bios_encoder_data_lookup() still remaims
for pre-DDI DP/HDMI ports as those don't (at least yet) use VBT
driven initialization.
TODO: DSI dual link handling is sketchy at best
v2: Leave intel_bios_encoder_port() to the encoder callback (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The port PLL selection needs to be up-to-date in the CRTC state of both
the primary and all secondary MST streams. The commit removing the
encoder update_prepare/complete hooks (see Fixes: below), stopped doing
this for secondary streams, fix this up.
Fixes: 0f752b2178c9 ("drm/i915: Remove the encoder update_prepare()/complete() hooks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com
|
|
Add an encoder hook, which can be called on enabled TC ports to
determine if the port uses a TBT or a non-TBT PLL. An upcoming patch
will use this to sanity check active TC port's PHY state wrt. the PLL
type used by the port.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-13-imre.deak@intel.com
|
|
What intel_ddi_{enable,disable}_pipe_clock() actually do is
enable the clock to the transcoder, not the pipe. Rename
accordingly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
|
|
Use forward declarations instead.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-1-jani.nikula@intel.com
|
|
Reanme intel_ddi_fdi_post_disable() to hsw_fdi_disable() and
relocate it next to all the other code dealing with FDI_RX.
intel_ddi.c has now been cleansed of FDI_RX.
In order to avoid exposing intel_disable_ddi_buf() outside
intel_ddi.c we can just open code the DDI_BUF_CTL write. The
enable side already has all that stuff open coded so
this actually is more symmetric. But we do need to remeber
to bring the intel_wait_ddi_buf_idle() call over from
inside intel_disable_ddi_buf().
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-9-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
In order to have per-lane drive settings we need intel_ddi_level()
to accept the lane as a parameter. That is, the eventual goal is to
call intel_ddi_level() once for each lane. For now we just pass in
a hardcoded 0 and use the same settings for every lane. Ie. no
change in behaviour yet.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-9-ville.syrjala@linux.intel.com
|
|
Now that .set_signal_levels() is used for HDMI as well, we can
remove the extra level of indirection and just plug the correct
stuff straight into .set_signal_levels().
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-5-ville.syrjala@linux.intel.com
|
|
Give the hsw/bdw/skl buf trans stuff a better namespace.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-2-ville.syrjala@linux.intel.com
|
|
Now that all the encoder clock stuff is uniformly abstracted
for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping()
to cover all of them.
Not sure there is a particular benefit in doing so, but less special
cases always makes me happy.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Support reading out the current state of the DDI clock.
Not sure we really want this. Seems a bit excessive just to
restore the debug print to icl_sanitize_encoder_pll_mapping()?
But maybe there's more use for it?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Move the *_get_ddi_pll() stuff into the encodet->get_config() hook.
There it neatly sits next to the matching .{enable,disable}_clock()
functions.
In order to avoid excessive boilerplate I changed the behaviour
such that all platforms now do the readout via
crtc_state->port_dpll[].
ICL+ TC is still a bit special due to TBTPLL not having a functional
.get_freq(). Should probably change that by adopting the LCPLL
approach, but that would require a fairly substantial rework of the
DPLL ID handling. So leave it for later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Yank out the HSW/BDW code from intel_ddi_clk_{select,disable}()
and put it into the new encoder .{enable,disable}_clock() vfuncs.
v2: s/dev_priv/i915/ (Lucas)
v3: Deal with FDI
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-4-ville.syrjala@linux.intel.com
|
|
The current code dealing with the clock routing for DDI encoders
is a maintenance nightmare. Let's start cleaning it up by allowing
the encoder to provide vfuncs for enablign/disabling the clock.
We leave them initially unimplemented, falling back to the old
if-else approach.
v2: Convert the FDI enable sequence
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-3-ville.syrjala@linux.intel.com
|
|
We want to put all DDI clock routing code into one place.
Unify the FDI enable sequence to use the standard function
instead of hand rolling its own. The disable sequence already
uses the normal thing.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-2-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Daniel asked for this, but it's a bit messy and I'm not sure
how best to clean it up yet.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: also moved fdi buf trans to intel_fdi.c.]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44491f2465549ea5c2e48cde5437fa232f77ab96.1612467466.git.jani.nikula@intel.com
|
|
Both HDCP_{1.x,2.x} requires to select/deselect Multistream HDCP bit
in TRANS_DDI_FUNC_CTL in order to enable/disable stream HDCP
encryption over DP MST Transport Link.
HDCP 1.4 stream encryption requires to validate the stream encryption
status in HDCP_STATUS_{TRANSCODER,PORT} register driving that link
in order to enable/disable the stream encryption.
Both of above requirement are same for all Gen with respect to
B.Spec Documentation.
v2:
- Cosmetic changes function name, error msg print and
stream typo fixes. [Uma]
v3:
- uniformity for connector detail in DMESG. [Ram]
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-8-anshuman.gupta@intel.com
|
|
Now that we've plumbed the crtc state all the way down we can
eliminate the DP_TP_{CTL,STATUS} register offsets from intel_dp,
and instead we derive them directly from the crtc state.
And thus we can get rid of the nasty hack in intel_ddi_get_config()
which mutates intel_dp during the readout.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Get rid of mode crtc->config usage, and some ad-hoc intel_dp state
usage by plumbing the crtc state all the way down to the link training
code.
Unfortunately we do have to keep some cached state in intel_dp so
that we can do the "does the link need retraining?" checks from
the short hpd handler.
v2: Add intel_crtc_state forward declaration
v3: Don't kill the PHY test code totally since it's
now in the hotplug work where we can get at the states
v4: Don't resurrect the debug scrambling disable bit (Imre)
Use intel_dp_mst_is_master_trans() (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201001111053.24451-1-ville.syrjala@linux.intel.com
|
|
Instead of using intel_dig_port's encoder pipe to determine which
transcoder to toggle signalling on, use the cpu_transcoder field already
stored in intel_hdmi.
This is particularly important for MST.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-6-sean@poorly.run #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-6-sean@poorly.run #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-6-sean@poorly.run #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-6-sean@poorly.run #v5
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-6-sean@poorly.run #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-6-sean@poorly.run #v7
Changes in v2:
-Added to the set
Changes in v3:
-s/hdcp/hdmi/ in commit msg (Ram)
Changes in v4:
-Rebased on intel_de_(read|write) change
Changes in v5:
-Update hdcp->cpu_transcoder in intel_hdcp_enable so it works with pipe != 0
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-6-sean@poorly.run
|
|
Different platforms have different max vswing/preemph settings.
Turn that into a pair vfuncs so we can decouple intel_dp.c and
intel_ddi.c further.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
|
|
Pass the encoder all the way down to
intel_ddi_transcoder_func_reg_val_get(). Allows us eliminate the
intel_ddi_get_crtc_encoder() eyesore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since intel_ddi_enable_pipe_clock() was pushed down into the
encoder hooks we can pass on the encoder instead of having
to use intel_ddi_get_crtc_encoder().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
We're going to want access to the atomic state for iterating
the slave crtcs when enabling the port sync master crtc. Pass
the atomic state all the way down.
The alternative would be yet another encoder hook which we'll
have to call after all the normal modeset stuff is done. Not
really a fan of yet another hook just for this.
Note that during readout state sanitation we are now going
to pass NULL as the atomic state since we don't have one.
We need to change that and then we can also s/crtc_state/crtc/
and s/conn_state/conn/ for the encoder hooks as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Move all the DPLL params->DPLL frequency conversion functions to
intel_dpll_mgr.c where the corresponding inverse conversions are.
The GEN11+ TBT PLL outputs multiple frequencies and for selecting the
one in use we need to check the DDI CLK mux. As part of the DDI clock
logic this selection is kept in intel_ddi.c.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-7-imre.deak@intel.com
|
|
The #include has been splattered all over the place, but there are
precious few places, all .c files, that actually need it.
v2: remove leftover double newlines
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225133131.3301-1-jani.nikula@intel.com
|
|
Remove the pointless vfunc detour for hsw_fdi_link_train()
and just call it directly. Also pass the encoder in so we
can nuke the silly encoder loop within.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
When BT.2020 Colorimetry output is used for DP, we should program BT.2020
Colorimetry to MSA and VSC SDP. In order to handle colorspace of
drm_connector_state, it moves a calling of intel_ddi_set_pipe_settings()
function into intel_ddi_pre_enable_dp(). And it also rename
intel_ddi_set_pipe_settings() to intel_ddi_set_dp_msa().
As per DP 1.4a spec section 2.2.4 [MSA Data Transport]
The MSA data that the DP Source device transports for reproducing the main
video stream. Attribute data is sent once per frame during the main video
stream’s vertical blanking period.
In order to distinguish needed colorimetry for VSC SDP, it adds
intel_dp_needs_vsc_sdp function.
If the output colorspace requires vsc sdp or output format is YCbCr 4:2:0,
it uses MSA with VSC SDP.
As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication of
Color Encoding Format and Content Color Gamut] while sending
BT.2020 Colorimetry signals we should program MSA MISC1 fields which
indicate VSC SDP for the Pixel Encoding/Colorimetry Format.
v2: Remove useless parentheses
v3: Addressed review comments from Ville
- In order to checking output format and output colorspace on
intel_dp_needs_vsc_sdp(), it passes entire intel_crtc_state struct
value.
- Remove a pointless variable.
v9: Addressed review comments from Ville
- Remove a duplicated output color space from intel_crtc_state.
- In order to handle colorspace of drm_connector_state, it moves a
calling of intel_ddi_set_pipe_settings() function into
intel_ddi_pre_enable_dp().
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-3-gwan-gyeong.mun@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
Add a new subdirectory for display code, and start off by moving
modesetting output/encoder code. Judging by the include changes, this is
a surprisingly clean operation.
v2:
- move intel_sdvo_regs.h too
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com
|
