summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/omapdrm/dss/dsi.c
AgeCommit message (Collapse)Author
2024-12-01Get rid of 'remove_new' relic from platform driver structLinus Torvalds
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-06-08drm/omap: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the omap drm driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-35-u.kleine-koenig@pengutronix.de
2022-12-16drm/omap: dsi: Fix excessive stack usageTomi Valkeinen
dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large struct in its frame, which can result in: drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the performance of the function is of no concern, let's allocate the struct with kmalloc instead. Compile-tested only. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com
2021-12-08omapdrm: dss: mark runtime PM functions __maybe_unusedArnd Bergmann
Using the SET_RUNTIME_PM_OPS() macro causes a warning about the referenced functions when they are marked static but not __maybe_unused: drivers/gpu/drm/omapdrm/dss/dss.c:1572:12: error: unused function 'dss_runtime_suspend' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dss.c:1584:12: error: unused function 'dss_runtime_resume' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dispc.c:4845:12: error: unused function 'dispc_runtime_suspend' [-Werror,-Wunused-function] drivers/gpu/drm/omapdrm/dss/dispc.c:4860:12: error: unused function 'dispc_runtime_resume' [-Werror,-Wunused-function] Fixes: b92f7ea556f8 ("drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211205131612.3192652-1-arnd@kernel.org
2021-11-10drm/omap: Make use of the helper function devm_platform_ioremap_resourcexxx()Cai Huoqing
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210831135707.4676-1-caihuoqing@baidu.com
2021-11-10drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()Cai Huoqing
Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose operators ".runtime_suspend/.runtime_resume", because the SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought in to make code a little clearer, a little more concise. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210828084811.104-1-caihuoqing@baidu.com
2021-10-07drm/omap: Use correct printk format specifiers for size_tLaurent Pinchart
The correct format specifier for size_t is %zu. Using %d (or %u) generates a warning on 64-bit platforms. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-03-26drm/omap: dsi: Add missing IRQF_ONESHOTYang Li
fixed the following coccicheck: ./drivers/gpu/drm/omapdrm/dss/dsi.c:4329:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: 4c1b935fea54 ("drm/omap: dsi: move TE GPIO handling into core") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1616492093-68237-1-git-send-email-yang.lee@linux.alibaba.com
2021-03-17drm/omap: dsi: fix unsigned expression compared with zeroJunlin Yang
r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero. so r < 0 condition is never accessible. Fixes coccicheck warnings: ./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6: WARNING: Unsigned expression compared with zero: r < 0 Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210312071445.1721-1-angkery@163.com
2021-01-27drm/omap: dsi: fix unreachable code in dsi_vc_send_short()Menglong Dong
The 'r' in dsi_vc_send_short() is of type 'unsigned int', so the 'r < 0' can't be true. Fix this by introducing a 'err' of type 'int' insteaded. Fixes: 1ed6253856cb ("drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg") Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127015117.23267-1-dong.menglong@zte.com.cn
2020-12-15drm/omap: dsi: allow DSI commands to be sent earlyTomi Valkeinen
Panel drivers can send DSI commands in panel's prepare(), which happens before the bridge's enable() is called. The OMAP DSI driver currently only sets up the DSI interface at bridge's enable(), so prepare() cannot be used to send DSI commands. This patch fixes the issue by making it possible to enable the DSI interface any time a command is about to be sent. Disabling the interface is be done via delayed work. Clarifications for the delayed disable work and the panel doing DSI transactions: bridge_enable: If the disable callback is called just before bridge_enable takes the dsi_bus_lock, no problem, bridge_enable just enables the interface again. If the callback is ran just after bridge_enable's dsi_bus_unlock, no problem, dsi->video_enabled == true so the callback does nothing. bridge_disable: similar to bridge-enable, the callback won't do anything if video_enabled == true, and after bridge-disable has turned the video and the interface off, there's nothing to do for the callback. omap_dsi_host_detach: this is called when the panel does mipi_dsi_detach(), and we expect the panel to _not_ do any DSI transactions after (or during) mipi_dsi_detatch(), so there are no race conditions. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-85-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: fix DCS_CMD_ENABLETomi Valkeinen
We only need to set VC_CTRL:DCS_CMD_ENABLE for command mode panels when the HW has DSI_QUIRK_DCS_CMD_CONFIG_VC quirk. The old code did this right by accident, but now we set DCS_CMD_ENABLE for video mode panels too. Fix this by skipping the set for video mode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-84-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: remove ulps supportTomi Valkeinen
ULPS is a niche power-saving feature which only really affects command mode panels showing a static picture. I know the ULPS code used to work very long time ago, but I could not get it working with the current driver. As the ULPS code is not trivial and includes delayed work (so lots of chances for race issues), and just keeping DSI video and command mode panels working has been challenging enough even without ULPS, lets remove ULPS support. When the DSI driver works reliably for command and video mode displays, someone interested can work on ULPS and add it back if the power saving is substantial enough. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-83-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: fix and cleanup ddr_clk_always_onTomi Valkeinen
The driver ignores MIPI_DSI_CLOCK_NON_CONTINUOUS, and always uses non-continuous clock. Fix this by using MIPI_DSI_CLOCK_NON_CONTINUOUS and at the same time, drop ddr_clk_always_on field which seems pretty useless. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-82-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: split video mode enable/disable into separate funcTomi Valkeinen
Clean up the code by separating video-mode enable/disable code into functions of their own. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-81-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: cleanup initial vc setupTomi Valkeinen
As we now have a fixed setup for VCs (VC0 for video stream, VC1 for commands), we can simplify the VC setup. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-80-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: rename dsi_display_* functionsTomi Valkeinen
The function names have evolved to be very confusing, and bunch of them have "display" in them even if the function doesn't deal with display as such (e.g. dsi_display_enable which just enables the DSI interface). Rename them by dropping the "display". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-79-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: display_disable cleanupTomi Valkeinen
We can drop dsi_display_disable() which just calls _dsi_display_disable(), and rename _dsi_display_disable() to dsi_display_disable(). The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_disable is extra and can be dropped, as _dsi_display_disable() has the same WARN_ON(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-78-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: display_enable cleanupTomi Valkeinen
We can drop dsi_display_enable(), which just calls _dsi_display_enable(), and rename _dsi_display_enable() to dsi_display_enable(). The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_enable is extra and can be dropped, as _dsi_display_enable() has the same WARN_ON(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-77-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: move enable/disable to bridge enable/disableTomi Valkeinen
Clean up the code by inlining dsi_enable_video_outputs and dsi_disable_video_outputs functions. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-76-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: move structs & defines to dsi.hTomi Valkeinen
Move structs and defines to a private dsi.h header file to make dsi.c a bit easier to navigate. Also move the (now) private structs and defines from omapdss.h to dsi.h. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-75-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: use separate VCs for cmd and videoTomi Valkeinen
For command mode panels we can use a single VC for sending command and video data, even if we have to change the data source for that VC when going from command to video or vice versa. However, with video mode panels we want to keep the pixel data VC enabled, and use another VC for command data, and the commands will get interleaved into the pixel data. This patch makes the driver use VC0 for commands and VC1 for video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-71-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: enable HS before sending the frameTomi Valkeinen
We currently use a single VC for sending commands and pixel data. The LP/HS mode for pixel data is correctly set to HS by accident, as we have set the VC to HS already earlier. However, if we use a different VC for video data, the VC is in LP mode. Fix this by always enabling HS mode before starting a frame update. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-70-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: skip dsi_vc_enable_hs when already in correct modeTomi Valkeinen
Simplify and optimize dsi_vc_enable_hs() so that it can be called without checking the current HS/LP mode. Make dsi_vc_enable_hs() return if the VC is already in the correct mode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-69-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: untangle vc & channelTomi Valkeinen
DSI virtual channel and hardware VC blocks have gotten tangled as described in the previous commits. This has not caused any issues, as the value for both is 0, so it happens to work. To fix the issue, change the code to use the correct one of the two. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-68-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: pass vc and channel to various functionsTomi Valkeinen
To start fixing the issues related to channels and vcs described in the previous commit, pass vc and/or channel to various functions which will need it do properly handle different DSI channels and VCs. No functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-67-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: rename 'channel' to 'vc'Tomi Valkeinen
The "channel" usage in omap dsi driver is confusing. We have three different "channels": 1) DSI virtual channel ID. This is a number from 0 to 3, included in the packet payload. 2) VC. This is a register block in the DSI IP. There are four of those blocks. A VC is a DSI "pipeline", with defined fifo settings, data source (cpu or dispc), and some other settings. It has no relation to the 1). 3) dispc channel. It's the "pipeline" number dispc uses to send pixel data. The previous patch handled the third case. To start fixing 1) and 2), we first rename all uses of 'channel' to 'vc', as in most of the cases that is the correct thing to use. However, in some places 1) and 2) have gotten mixed up (i.e. the code uses msg->channel when it should use vc), which will be fixed in the following patch. Note that mixing 1) and 2) currently is "fine", as at the moment we only support DSI peripherals with DSI virtual channel 0, and we always use VC0 to send data. So both 1) and 2) are always 0. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-66-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: cleanup dispc channel usageTomi Valkeinen
The "channel" usage in omap dsi driver is confusing. As the first step, change "channel" to "dispc_channel" when dealing with the dispc channel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-65-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: drop useless channel checksTomi Valkeinen
A DSI peripheral can have virtual channel ID of 0-3. This should be always the case, and there's no need in the driver to validate the channel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-64-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: simplify VC handlingTomi Valkeinen
The VC handling has gotten quite tangled up. As the first step to clean it up, lets define that we only support a single DSI peripheral (which was really already the case), and we always use VC0 (define VC_DEFAULT 0) register block to send data to the peripheral. We can thus have a single mipi_dsi_device pointer and remove the for-loops which made passes over all the four VCs (just the first one was ever used). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-63-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: send nop instead of page & columnTomi Valkeinen
The OMAP DSI command mode panel driver used to send page & column address before each frame update, and this code was moved into the DSI host driver when converting it to the DRM bridge model. However, it's not really required to send the page & column address before each frame. It's also something that doesn't really belong to the DSI host driver, so we should drop the code. That said, frame updates break if we don't send _something_ between the frames. A NOP command does the trick. It is not clear if this behavior is as expected from a DSI command mode frame transfer, or is it a feature/issue with OMAP DSI driver, or a feature/issue in the command mode panel used. Most likely this is related to the following from the DSI spec: "To enable PHY synchronization the host processor should periodically end HS transmission and drive the Data Lanes to the LP state. This transition should take place at least once per frame." Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-62-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: set trans_mode according to client mode_flagsTomi Valkeinen
The DSI host driver currently ignores the video mode flags in client->mode_flags. Add the code to take the transfer mode from client's mode_flags. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-60-tomi.valkeinen@ti.com
2020-12-15drm/omap: drop unused owner fieldTomi Valkeinen
dssdev->owner is set, but never used. We can drop the field. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-53-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: simplify pin configSebastian Reichel
Simplify DSI pin config, which always originates from DT nowadays. With the code being fully contained in the DSI encoder, we can drop the public structure. Since the function is no longer exposed, it now directly takes the private DSI data pointer. This drops a pointless conversion and means the pins can be configured earlier. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-49-tomi.valkeinen@ti.com
2020-12-15drm/omap: simplify DSI manual update codeSebastian Reichel
Move dsi_ops into the main structure, since all other ops are gone. Instead of checking the device type we can simply check if dsi_ops are set. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-48-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: Register a drm_bridgeSebastian Reichel
In order to integrate with a chain of drm_bridge, the internal DSI output has to expose its operations through the drm_bridge API. Register a bridge at initialisation time to do so and remove the omap_dss_device operations that are now unused. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-41-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: implement check timingsSebastian Reichel
Implement check timings, which will check if it's possible to configure the clocks for the provided mode using the same code as the set_config() hook. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-35-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: convert to drm_panelSebastian Reichel
This converts the DSI module to expect common drm_panel display drivers instead of dssdev based ones. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-33-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: drop custom panel capability supportSebastian Reichel
Due to previous changes the DSI encoder gets the capabilities via DSI client's mode_flags and no longer needs the omapdss specific caps. The core code now checks if the DSI encoder is actually configured into command mode instead of just checking the panel capabilities. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-32-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: move panel refresh function to hostSebastian Reichel
This moves the panel refresh/update function from the panel driver into the DSI host driver to prepare for common drm_panel support. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-30-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: do ULPS in host driverSebastian Reichel
Move ULPS handling into the DSI host controller, so that we no longer need a custom API for the DSI client. Note that for now ULPS is always disabled. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-29-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: untangle ulps ops from enable/disableSebastian Reichel
Create a custom function pointer for ULPS and use it instead of reusing disable/enable functions for ULPS mode switch. This allows us to use the common disable/enable functions pointers for DSI. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-28-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: do bus locking in host driverSebastian Reichel
This moves the bus locking into the host driver and unexports the custom API in preparation for drm_panel support. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-27-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: drop custom enable_te() APISebastian Reichel
Instead of using the custom enable_te() API, this automatically enables/disables TE core support when a matching packet is sent to the panel. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-26-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: move TE GPIO handling into coreSebastian Reichel
In preparation for removing custom DSS calls from the DSI panel driver, this moves support for external tearing event GPIOs into the DSI host driver. This way tearing events are always handled in the core resulting in simplification of the panel drivers. The TE GPIO acquisition follows works in the same way as the exynos DSI implementation. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-25-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: lp/hs switching support for transfer()Sebastian Reichel
Integrate low-power / high-speed bus switching into transfer function and drop the omapdrm specific enable_hs() callback. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-24-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: use pixel-format and mode from attachSebastian Reichel
In order to reduce the amount of custom functionality, this moves handling of pixel format and DSI mode from set_config() to dsi attach. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-22-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: request VC via mipi_dsi_attachSebastian Reichel
Drop custom request_vc/release_vc callbacks by using the generic mipi_dsi_attach/mipi_dsi_detach functions. To use mipi_dsi_attach() we need to fill in the mipi_dsi_device fields, and some of these fields overlap with the fields in omap_dss_dsi_config. In later patches the latter will get dropped. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-15-tomi.valkeinen@ti.com
2020-12-15drm/omap: dsi: introduce mipi_dsi_hostSebastian Reichel
This moves from custom platform driver infrastructure to mipi_dsi_host and mipi_dsi_device. Note, that this is a graduate step and the driver only uses the devices types and transfer function, but not yet the new device binding style or drm_panel. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-13-tomi.valkeinen@ti.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-04-22 12:53:11 +0000