summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-designware-core.c
AgeCommit message (Expand)Author
2015-01-26i2c: designware: Do not calculate SCL timing parameters needlesslyJarkko Nikula
2015-01-26i2c: designware: Add i2c bus locking supportDavid Box
2015-01-23i2c: designware: use {readl|writel}_relaxed instead of readl/writelJisheng Zhang
2014-11-21i2c: designware: prevent early stop on TX FIFO emptyAndrew Jackson
2014-11-07i2c: remove FSF addressWolfram Sang
2014-05-14i2c: designware: Mask all interrupts during i2c controller enableDu, Wenkai
2014-03-09i2c: designware: make SCL and SDA falling time configurableRomain Baeriswyl
2014-01-13i2c: designware: remove HAVE_CLK build dependecyBaruch Siach
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
2013-09-27i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE is...Chew, Chiau Ee
2013-08-28i2c: designware: make HCNT/LCNT values configurableMika Westerberg
2013-08-07i2c: designware: Manually set RESTART bit between messagesChew, Chiau Ee
2013-06-26i2c-designware: make SDA hold time configurableChristian Ruppert
2013-06-15i2c: designware: fix race between subsequent xfersChristian Ruppert
2013-06-12i2c: designware: prevent signals from aborting I2C transfersMika Westerberg
2013-05-17i2c: designware: always clear interrupts before enabling themMika Westerberg
2013-05-17i2c: designware: fix RX FIFO overrunJosef Ahmad
2013-04-15i2c-designware: switch to use runtime PM autosuspendMika Westerberg
2013-04-15i2c-designware: use usleep_range() in the busy-loopMika Westerberg
2013-04-15i2c-designware: enable/disable the controller properlyMika Westerberg
2013-01-28i2c-designware: always set the STOP bit after last byteMika Westerberg
2013-01-22i2c-designware: add missing MODULE_LICENSEMika Westerberg
2012-10-05i2c-designware: i2c_dw_xfer_msg can be staticJean Delvare
2012-09-10i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG...Axel Lin
2012-05-12i2c: designware: Add support for 16bit register accessStefan Roese
2011-10-29i2c-designware: Add runtime power management supportDirk Brandewie
2011-10-29i2c-designware: Push all register reads/writes into the core code.Dirk Brandewie
2011-10-29i2c-designware: Support multiple cores using same ISRDirk Brandewie
2011-10-29i2c-designware: move controller config to bus specific portion of driverDirk Brandewie
2011-10-29i2c-designware: move i2c functionality bit field to be adapter specificDirk Brandewie
2011-10-29i2c-designware: Move retriveving the clock speed out of core code.Dirk Brandewie
2011-10-29i2c-designware: split of i2c-designware.c into core and bus specific partsDirk Brandewie
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-24 02:16:25 +0000