| Age | Commit message (Collapse) | Author |
|---|
|
When the GIC is in EOImode == 1 in irq_complete_ack() it executes a
priority drop not a deactivation.
Fix the function comment to clarify the behaviour.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241202112518.51178-1-lpieralisi@kernel.org
|
|
Christoffer reports that on some implementations, writing to
GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest
issuing a deactivation of that interrupt via the system register interface.
There are multiple reasons to this:
- this uses an early write-acknoledgement memory type (nGnRE), meaning
that the write may only have made it as far as some interconnect
by the time the store is considered "done"
- the GIC itself is allowed to buffer the write until it decides to
take it into account (as long as it is in finite time)
The effects are that the activation may not have taken effect by the time
the kernel enters the guest, forcing an immediate exit, or that a guest
deactivation occurs before the interrupt is active, doing nothing.
In order to guarantee that the write to the ISACTIVER register has taken
effect, read back from it, forcing the interconnect to propagate the write,
and the GIC to process the write before returning the read.
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
The GICv3 driver pokes GICv3 system registers in gic_prio_init() before
gic_cpu_sys_reg_init() ensures that GICv3 system registers have been
enabled by writing to ICC_SRE_EL1.SRE.
On arm64 this is benign as has_useable_gicv3_cpuif() runs earlier during
cpufeature detection, and this enables the GICv3 system registers.
On 32-bit arm when booting on an FVP using the boot-wrapper, the accesses
in gic_prio_init() end up being UNDEFINED and crashes the kernel during
boot.
This is a regression introduced by the addition of gic_prio_init().
Fix this by factoring out the SRE initialization into a new function and
calling it early in the three paths where SRE may not have been
initialized:
(1) gic_init_bases(), before the primary CPU pokes GICv3 sysregs in
gic_prio_init().
(2) gic_starting_cpu(), before secondary CPUs initialize GICv3 sysregs
in gic_cpu_init().
(3) gic_cpu_pm_notifier(), before CPUs re-initialize GICv3 sysregs in
gic_cpu_sys_reg_init().
Fixes: d447bf09a4013541 ("irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
All architectures with use set_handle_irq() to set the root chip interrupt
handler call that handler from C code, so there's no need for these
handlers to be marked asmlinkage.
Remove asmlinkage for all handlers registered with set_handle_irq().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/all/20240729112606.1581732-1-ruanjinjie@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
|
The caller of gic_of_setup_kvm_info() already queried DT for the value
of the #redistributor-regions property. So just pass this value,
instead of doing the DT look-up again in the callee.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/808286a3ac08f60585ae7e2c848e0f9b3cb79cf8.1719912215.git.geert+renesas@glider.be
|
|
* for-next/vcpu-hotplug: (21 commits)
: arm64 support for virtual CPU hotplug (ACPI)
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
cpumask: Add enabled cpumask for present CPUs that can be brought online
arm64: document virtual CPU hotplug's expectations
arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled.
arm64: arch_register_cpu() variant to check if an ACPI handle is now available.
arm64: psci: Ignore DENIED CPUs
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry
arm64: acpi: Move get_cpu_for_acpi_id() to a header
ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
ACPI: scan: switch to flags for acpi_scan_check_and_detach()
ACPI: processor: Register deferred CPUs from acpi_processor_get_info()
ACPI: processor: Add acpi_get_processor_handle() helper
ACPI: processor: Move checks and availability of acpi_processor earlier
ACPI: processor: Fix memory leaks in error paths of processor_add()
ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add()
ACPI: processor: Drop duplicated check on _STA (enabled + present)
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
...
|
|
Compiling the GICv3 driver on arm32 with CONFIG_SMP disabled
(CONFIG_ACPI is not available) generates an unused variable warning for
'broken_rdists'. Add a __maybe_unused attribute to silence the compiler.
Fixes: d633da5d3ab1 ("irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs")
Cc: <stable@vger.kernel.org> # .x
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To support virtual CPU hotplug, ACPI has added an 'online capable' bit
to the MADT GICC entries. This indicates a disabled CPU entry may not
be possible to online via PSCI until firmware has set enabled bit in
_STA.
This means that a "usable" GIC redistributor is one that is marked as
either enabled, or online capable. The meaning of the
acpi_gicc_is_usable() would become less clear than just checking the
pair of flags at call sites. As such, drop that helper function.
The test in gic_acpi_match_gicc() remains as testing just the
enabled bit so the count of enabled distributors is correct.
What about the redistributor in the GICC entry? ACPI doesn't want to say.
Assume the worst: When a redistributor is described in the GICC entry,
but the entry is marked as disabled at boot, assume the redistributor
is inaccessible.
The GICv3 driver doesn't support late online of redistributors, so this
means the corresponding CPU can't be brought online either.
Rather than modifying cpu masks that may already have been used,
register a new cpuhp callback to fail this case. This must run earlier
than the main gic_starting_cpu() so that this case can be rejected
before the section of cpuhp that runs on the CPU that is coming up as
that is not allowed to fail. This solution keeps the handling of this
broken firmware corner case local to the GIC driver. As precise ordering
of this callback doesn't need to be controlled as long as it is
in that initial prepare phase, use CPUHP_BP_PREPARE_DYN.
Systems that want CPU hotplug in a VM can ensure their redistributors
are always-on, and describe them that way with a GICR entry in the MADT.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-15-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
gic_acpi_match_gicc() is only called via gic_acpi_count_gicr_regions().
It should only count the number of enabled redistributors, but it
also tries to sanity check the GICC entry, currently returning an
error if the Enabled bit is set, but the gicr_base_address is zero.
Adding support for the online-capable bit to the sanity check will
complicate it, for no benefit. The existing check implicitly depends on
gic_acpi_count_gicr_regions() previous failing to find any GICR regions
(as it is valid to have gicr_base_address of zero if the redistributors
are described via a GICR entry).
Instead of complicating the check, remove it. Failures that happen at
this point cause the irqchip not to register, meaning no irqs can be
requested. The kernel grinds to a panic() pretty quickly.
Without the check, MADT tables that exhibit this problem are still
caught by gic_populate_rdist(), which helpfully also prints what went
wrong:
| CPU4: mpidr 100 has no re-distributor!
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-14-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The distributor and PMR/RPR can present different views of the interrupt
priority space dependent upon the values of GICD_CTLR.DS and
SCR_EL3.FIQ. Currently we treat the distributor's view of the priority
space as canonical, and when the two differ we change the way we handle
values in the PMR/RPR, using the `gic_nonsecure_priorities` static key
to decide what to do.
This approach works, but it's sub-optimal. When using pseudo-NMI we
manipulate the distributor rarely, and we manipulate the PMR/RPR
registers very frequently in code spread out throughout the kernel (e.g.
local_irq_{save,restore}()). It would be nicer if we could use fixed
values for the PMR/RPR, and dynamically choose the values programmed
into the distributor.
This patch changes the GICv3 driver and arm64 code accordingly. PMR
values are chosen at compile time, and the GICv3 driver determines the
appropriate values to program into the distributor at boot time. This
removes the need for the `gic_nonsecure_priorities` static key and
results in smaller and better generated code for saving/restoring the
irqflags.
Before this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d503201f nop
| 10: d2800c00 mov x0, #0x60 // #96
| 14: d5184600 msr icc_pmr_el1, x0
| 18: d65f03c0 ret
| 1c: d2801400 mov x0, #0xa0 // #160
| 20: 17fffffd b 14 <outlined_local_irq_disable+0x14>
After this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d2801800 mov x0, #0xc0 // #192
| 10: d5184600 msr icc_pmr_el1, x0
| 14: d65f03c0 ret
... with 3 fewer instructions per call.
For defconfig + CONFIG_PSEUDO_NMI=y, this results in a minor saving of
~4K of text, and will make it easier to make further improvements to the
way we manipulate irqflags and DAIF bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In subsequent patches the GICv3 driver will choose the regular interrupt
priority at boot time, dependent on the configuration of GICD_CTRL.DS
and SCR_EL3.FIQ. This will need to be chosen before we configure the
distributor with default prioirities for all the interrupts, which
happens before we currently detect these in gic_cpu_sys_reg_init().
Add a new gic_prio_init() function to detect these earlier and log them
to the console so that any problems can be debugged more easily. This
also allows the uniformity checks in gic_cpu_sys_reg_init() to be
simplified, as we can compare directly with the boot CPU values which
were recorded earlier.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In subsequent patches the GICv3 driver will choose the regular interrupt
priority at boot time.
In preparation for using dynamic priorities, place the priorities in
variables and update the code to pass these as parameters. Users of
GICD_INT_DEF_PRI_X4 are modified to replicate the priority byte using
REPEAT_BYTE_U32().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The gic_configure_irq(), gic_dist_config(), and gic_cpu_config()
functions each take an optional "sync_access" callback, but in almost
all cases this is not used. The only user is the GICv3 driver's
gic_cpu_init() function, which uses gic_redist_wait_for_rwp() as the
"sync_access" callback for gic_cpu_config().
It would be simpler and clearer to remove the callback and have the
GICv3 driver call gic_redist_wait_for_rwp() explicitly after
gic_cpu_config().
Remove the "sync_access" callback, and call gic_redist_wait_for_rwp()
explicitly in the GICv3 driver.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The GIC architecture specification defines a set of registers for
redistributors and ITSes that control the sharebility and cacheability
attributes of redistributors/ITSes initiator ports on the interconnect
(GICR_[V]PROPBASER, GICR_[V]PENDBASER, GITS_BASER<n>).
Architecturally the GIC provides a means to drive shareability and
cacheability attributes signals but it is not mandatory for designs to
wire up the corresponding interconnect signals that control the
cacheability/shareability of transactions.
Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes the
redistributors and ITSes non-coherent observers.
To enable non-coherent GIC designs on ACPI based systems, parse the MADT
GICC/GICR/ITS subtables non-coherent flags to determine whether the
respective components are non-coherent observers and force the
shareability attributes to be programmed into the redistributors and
ITSes registers.
An ACPI global function (acpi_get_madt_revision()) is added to retrieve
the MADT revision, in that it is essential to check the MADT revision
before checking for flags that were added with MADT revision 7 so that
if the kernel is booted with an ACPI MADT table with revision < 7 it
skips parsing the newly added flags (that should be zeroed reserved
values for MADT versions < 7 but they could turn out to be buggy and
should be ignored).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240606094238.757649-2-lpieralisi@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
|
Currently the irqdomain select callback is only invoked when the parameter
count of the fwspec arguments is not zero. That makes sense because then
the match is on the firmware node and eventually on the bus_token, which is
already handled in the core code.
The upcoming support for per device MSI domains requires to do real bus
token specific checks in the MSI parent domains with a zero parameter
count.
Make the gic-v3 select() callback handle that case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240127161753.114685-2-apatel@ventanamicro.com
|
|
GIC & GIC-v3 share same gic_irq() implementations, both of which serve
exact same purpose as irqd_to_hwirq(). irqd_to_hwirq() is a generic and
top level API of the interrupt subsystem, it's independent of any chip
implementation.
Replace gic_irq() with irqd_to_hwirq() and convert struct irq_data::hwirq
to irq_hw_number_t explicitly.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240122085716.2999875-3-dawei.li@shingroup.cn
|
|
Replace the open coded register polling loop with
readl_relaxed_poll_timeout_atomic() which provides the same functionality.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240122085716.2999875-2-dawei.li@shingroup.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
|
|
This reverts commit a07a594152173a3dd3bdd12fc7d73dbba54cdbca.
This is no longer needed after the patch ("arm64: Move MediaTek GIC
quirk handling from irqchip to core).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231107072651.v2.2.I2c5fa192e767eb3ee233bc28eb60e2f8656c29a6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on
MediaTek devices w/ firmware issues") we added a method for detecting
MediaTek devices with broken firmware and disabled pseudo-NMI. While
that worked, it didn't address the problem at a deep enough level.
The fundamental issue with this broken firmware is that it's not
saving and restoring several important GICR registers. The current
list is believed to be:
* GICR_NUM_IPRIORITYR
* GICR_CTLR
* GICR_ISPENDR0
* GICR_ISACTIVER0
* GICR_NSACR
Pseudo-NMI didn't work because it was the only thing (currently) in
the kernel that relied on the broken registers, so forcing pseudo-NMI
off was an effective fix. However, it could be observed that calling
system_uses_irq_prio_masking() on these systems still returned
"true". That caused confusion and led to the need for
commit a07a59415217 ("arm64: smp: avoid NMI IPIs with broken MediaTek
FW"). It's worried that the incorrect value returned by
system_uses_irq_prio_masking() on these systems will continue to
confuse future developers.
Let's fix the issue a little more completely by disabling IRQ
priorities at a deeper level in the kernel. Once we do this we can
revert some of the other bits of code dealing with this quirk.
This includes a partial revert of commit 44bd78dd2b88
("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware
issues"). This isn't a full revert because it leaves some of the
changes to the "quirks" structure around in case future code needs it.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231107072651.v2.1.Ide945748593cffd8ff0feb9ae22b795935b944d6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
|
|
* for-next/cpus_have_const_cap: (38 commits)
: cpus_have_const_cap() removal
arm64: Remove cpus_have_const_cap()
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_REPEAT_TLBI
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_NVIDIA_CARMEL_CNP
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_CAVIUM_23154
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_2645198
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1742098
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1542419
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_843419
arm64: Avoid cpus_have_const_cap() for ARM64_UNMAP_KERNEL_AT_EL0
arm64: Avoid cpus_have_const_cap() for ARM64_{SVE,SME,SME2,FA64}
arm64: Avoid cpus_have_const_cap() for ARM64_SPECTRE_V2
arm64: Avoid cpus_have_const_cap() for ARM64_SSBS
arm64: Avoid cpus_have_const_cap() for ARM64_MTE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_TLB_RANGE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_WFXT
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_RNG
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_EPAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_PAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_DIT
...
|
|
'for-next/kselftest', 'for-next/misc' and 'for-next/cpufeat-display-cores', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
docs/perf: Add ampere_cspmu to toctree to fix a build warning
perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU
perf: arm_cspmu: Support implementation specific validation
perf: arm_cspmu: Support implementation specific filters
perf: arm_cspmu: Split 64-bit write to 32-bit writes
perf: arm_cspmu: Separate Arm and vendor module
* for-next/sve-remove-pseudo-regs:
: arm64/fpsimd: Remove the vector length pseudo registers
arm64/sve: Remove SMCR pseudo register from cpufeature code
arm64/sve: Remove ZCR pseudo register from cpufeature code
* for-next/backtrace-ipi:
: Add IPI for backtraces/kgdb, use NMI
arm64: smp: Don't directly call arch_smp_send_reschedule() for wakeup
arm64: smp: avoid NMI IPIs with broken MediaTek FW
arm64: smp: Mark IPI globals as __ro_after_init
arm64: kgdb: Implement kgdb_roundup_cpus() to enable pseudo-NMI roundup
arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI
arm64: smp: Add arch support for backtrace using pseudo-NMI
arm64: smp: Remove dedicated wakeup IPI
arm64: idle: Tag the arm64 idle functions as __cpuidle
irqchip/gic-v3: Enable support for SGIs to act as NMIs
* for-next/kselftest:
: Various arm64 kselftest updates
kselftest/arm64: Validate SVCR in streaming SVE stress test
* for-next/misc:
: Miscellaneous patches
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
arm64/mm: Hoist synchronization out of set_ptes() loop
arm64: swiotlb: Reduce the default size if no ZONE_DMA bouncing needed
* for-next/cpufeat-display-cores:
: arm64 cpufeature display enabled cores
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
|
|
ACPI, irqchip and the architecture code all inspect the MADT
enabled bit for a GICC entry in the MADT.
The addition of an 'online capable' bit means all these sites need
updating.
Move the current checks behind a helper to make future updates easier.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/E1quv5D-00AeNJ-U8@rmk-PC.armlinux.org.uk
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In gic_read_iar() we use cpus_have_const_cap() to check for
ARM64_WORKAROUND_CAVIUM_23154 but this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_WORKAROUND_CAVIUM_23154 cpucap is detected and patched early
on the boot CPU before the GICv3 driver is initialized and hence before
gic_read_iar() is ever called. Thus it is not necessary to use
cpus_have_const_cap(), and alternative_has_cap() is equivalent.
In addition, arm64's gic_read_iar() lives in irq-gic-v3.c purely for
historical reasons. It was originally added prior to 32-bit arm support
in commit:
6d4e11c5e2e8cd54 ("irqchip/gicv3: Workaround for Cavium ThunderX erratum 23154")
When support for 32-bit arm was added, 32-bit arm's gic_read_iar()
implementation was placed in <asm/arch_gicv3.h>, but the arm64 version
was kept within irq-gic-v3.c as it depended on a static key local to
irq-gic-v3.c and it was easier to add ifdeffery, which is what we did in
commit:
7936e914f7b0827c ("irqchip/gic-v3: Refactor the arm64 specific parts")
Subsequently the static key was replaced with a cpucap in commit:
a4023f682739439b ("arm64: Add hypervisor safe helper for checking constant capabilities")
Since that commit there has been no need to keep arm64's gic_read_iar()
in irq-gic-v3.c.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. For consistency, move the arm64-specific gic_read_iar()
implementation over to arm64's <asm/arch_gicv3.h>. The
ARM64_WORKAROUND_CAVIUM_23154 cpucap is added to cpucap_is_possible() so
that code can be elided entirely when this is not possible.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The GIC architecture specification defines a set of registers
for redistributors and ITSes that control the sharebility and
cacheability attributes of redistributors/ITSes initiator ports
on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER,
GITS_BASER<n>).
Architecturally the GIC provides a means to drive shareability
and cacheability attributes signals and related IWB/OWB/ISH barriers
but it is not mandatory for designs to wire up the corresponding
interconnect signals that control the cacheability/shareability
of transactions.
Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes
the redistributors and ITSes non-coherent observers.
So far, the GIC driver on probe executes a write to "probe" for
the redistributors and ITSes registers shareability bitfields
by writing a value (ie InnerShareable - the shareability domain the
CPUs are in) and check it back to detect whether the value sticks or
not; this hinges on a GIC programming model behaviour that predates the
current specifications, that just define shareability bits as writeable
but do not guarantee that writing certain shareability values
enable the expected behaviour for the redistributors/ITSes
memory interconnect ports.
To enable non-coherent GIC designs, introduce the "dma-noncoherent"
device tree property to allow firmware to describe redistributors and
ITSes as non-coherent observers on the memory interconnect and use the
property to force the shareability attributes to be programmed into the
redistributors and ITSes registers through the GIC quirks mechanism.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-3-lpieralisi@kernel.org
|
|
Some MediaTek devices have broken firmware which corrupts some GICR
registers behind the back of the OS, and pseudo-NMIs cannot be used on
these devices. For more details see commit:
44bd78dd2b8897f5 ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")
We did not take this problem into account in commit:
331a1b3a836c0f38 ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Since that commit arm64's SMP code will try to setup some IPIs as
pseudo-NMIs, even on systems with broken FW. The GICv3 code will
(rightly) reject attempts to request interrupts as pseudo-NMIs,
resulting in boot-time failures.
Avoid the problem by taking the broken FW into account when deciding to
request IPIs as pseudo-NMIs. The GICv3 driver maintains a static_key
named "supports_pseudo_nmis" which is false on systems with broken FW,
and we can consult this within ipi_should_be_nmi().
Fixes: 331a1b3a836c ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Closes: https://issuetracker.google.com/issues/197061987#comment68
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
As of commit 6abbd6988971 ("irqchip/gic, gic-v3: Make SGIs use
handle_percpu_devid_irq()") SGIs are treated the same as PPIs/EPPIs
and use handle_percpu_devid_irq() by default. Unfortunately,
handle_percpu_devid_irq() isn't NMI safe, and so to run in an NMI
context those should use handle_percpu_devid_fasteoi_nmi().
In order to accomplish this, we just have to make room for SGIs in the
array of refcounts that keeps track of which interrupts are set as
NMI. We also rename the array and create a new indexing scheme that
accounts for SGIs.
Also, enable NMI support prior to gic_smp_init() as allocation of SGIs
as IRQs/NMIs happen as part of this routine.
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230906090246.v13.1.I1223c11c88937bd0cbd9b086d4ef216985797302@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
GIC700 erratum 2941627 may cause GIC-700 missing SPIs wake
requests when SPIs are deactivated while targeting a
sleeping CPU - ie a CPU for which the redistributor:
GICR_WAKER.ProcessorSleep == 1
This runtime situation can happen if an SPI that has been
activated on a core is retargeted to a different core, it
becomes pending and the target core subsequently enters a
power state quiescing the respective redistributor.
When this situation is hit, the de-activation carried out
on the core that activated the SPI (through either ICC_EOIR1_EL1
or ICC_DIR_EL1 register writes) does not trigger a wake
requests for the sleeping GIC redistributor even if the SPI
is pending.
Work around the erratum by de-activating the SPI using the
redistributor GICD_ICACTIVER register if the runtime
conditions require it (ie the IRQ was retargeted between
activation and de-activation).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230704155034.148262-1-lpieralisi@kernel.org
|
|
The ASR8601 SoC combines ARMv8.2 CPUs from ARM with a GIC-500,
also from ARM. However, the two are incompatible as the former
expose an affinity in the form of (cluster, core, thread),
while the latter can only deal with (cluster, core). If nothing
is done, the GIC simply cannot route interrupts to the CPUs.
Implement a workaround that shifts the affinity down by a level,
ensuring the delivery of interrupts despite the implementation
mismatch.
Signed-off-by: zhengyan <zhengyan@asrmicro.com>
[maz: rewrote commit message, reimplemented the workaround
in a manageable way]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The GICv3 driver uses multiple formats for the affinity, all
derived from a reading of MPDR_EL1 on one CPU or another.
Simplify the handling of these affinity by moving the access
to the CPU affinity via cpu_logical_map() inside the helper,
and rename it accordingly.
This will be helpful to support some more broken hardware.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Some Chromebooks with Mediatek SoCs have a problem where the firmware
doesn't properly save/restore certain GICR registers. Newer
Chromebooks should fix this issue and we may be able to do firmware
updates for old Chromebooks. At the moment, the only known issue with
these Chromebooks is that we can't enable "pseudo NMIs" since the
priority register can be lost. Enabling "pseudo NMIs" on Chromebooks
with the problematic firmware causes crashes and freezes.
Let's detect devices with this problem and then disable "pseudo NMIs"
on them. We'll detect the problem by looking for the presence of the
"mediatek,broken-save-restore-fw" property in the GIC device tree
node. Any devices with fixed firmware will not have this property.
Our detection plan works because we never bake a Chromebook's device
tree into firmware. Instead, device trees are always bundled with the
kernel. We'll update the device trees of all affected Chromebooks and
then we'll never enable "pseudo NMI" on a kernel that is bundled with
old device trees. When a firmware update is shipped that fixes this
issue it will know to patch the device tree to remove the property.
In order to make this work, the quick detection mechanism of the GICv3
code is extended to be able to look for properties in addition to
looking at "compatible".
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid
|
|
The T241 platform suffers from the T241-FABRIC-4 erratum which causes
unexpected behavior in the GIC when multiple transactions are received
simultaneously from different sources. This hardware issue impacts
NVIDIA server platforms that use more than two T241 chips
interconnected. Each chip has support for 320 {E}SPIs.
This issue occurs when multiple packets from different GICs are
incorrectly interleaved at the target chip. The erratum text below
specifies exactly what can cause multiple transfer packets susceptible
to interleaving and GIC state corruption. GIC state corruption can
lead to a range of problems, including kernel panics, and unexpected
behavior.
>From the erratum text:
"In some cases, inter-socket AXI4 Stream packets with multiple
transfers, may be interleaved by the fabric when presented to ARM
Generic Interrupt Controller. GIC expects all transfers of a packet
to be delivered without any interleaving.
The following GICv3 commands may result in multiple transfer packets
over inter-socket AXI4 Stream interface:
- Register reads from GICD_I* and GICD_N*
- Register writes to 64-bit GICD registers other than GICD_IROUTERn*
- ITS command MOVALL
Multiple commands in GICv4+ utilize multiple transfer packets,
including VMOVP, VMOVI, VMAPP, and 64-bit register accesses."
This issue impacts system configurations with more than 2 sockets,
that require multi-transfer packets to be sent over inter-socket
AXI4 Stream interface between GIC instances on different sockets.
GICv4 cannot be supported. GICv3 SW model can only be supported
with the workaround. Single and Dual socket configurations are not
impacted by this issue and support GICv3 and GICv4."
Link: https://developer.nvidia.com/docs/t241-fabric-4/nvidia-t241-fabric-4-errata.pdf
Writing to the chip alias region of the GICD_In{E} registers except
GICD_ICENABLERn has an equivalent effect as writing to the global
distributor. The SPI interrupt deactivate path is not impacted by
the erratum.
To fix this problem, implement a workaround that ensures read accesses
to the GICD_In{E} registers are directed to the chip that owns the
SPI, and disable GICv4.x features. To simplify code changes, the
gic_configure_irq() function uses the same alias region for both read
and write operations to GICD_ICFGR.
Co-developed-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com> (for SMCCC/SOC ID bits)
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230319024314.3540573-2-sdonthineni@nvidia.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
|
|
When Priority Mask Hint Enable (PMHE) == 0b1, the GIC may use the PMR
value to determine whether to signal an IRQ to a PE, and consequently
after a change to the PMR value, a DSB SY may be required to ensure that
interrupts are signalled to a CPU in finite time. When PMHE == 0b0,
interrupts are always signalled to the relevant PE, and all masking
occurs locally, without requiring a DSB SY.
Since commit:
f226650494c6aa87 ("arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear")
... we handle this dynamically: in most cases a static key is used to
determine whether to issue a DSB SY, but the entry code must read from
ICC_CTLR_EL1 as static keys aren't accessible from plain assembly.
It would be much nicer to use an alternative instruction sequence for
the DSB, as this would avoid the need to read from ICC_CTLR_EL1 in the
entry code, and for most other code this will result in simpler code
generation with fewer instructions and fewer branches.
This patch adds a new ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap which is
only set when ICC_CTLR_EL1.PMHE == 0b0 (and GIC priority masking is in
use). This allows us to replace the existing users of the
`gic_pmr_sync` static key with alternative sequences which default to a
DSB SY and are relaxed to a NOP when PMHE is not in use.
The entry assembly management of the PMR is slightly restructured to use
a branch (rather than multiple NOPs) when priority masking is not in
use. This is more in keeping with other alternatives in the entry
assembly, and permits the use of a separate alternatives for the
PMHE-dependent DSB SY (and removal of the conditional branch this
currently requires). For consistency I've adjusted both the save and
restore paths.
According to bloat-o-meter, when building defconfig +
CONFIG_ARM64_PSEUDO_NMI=y this shrinks the kernel text by ~4KiB:
| add/remove: 4/2 grow/shrink: 42/310 up/down: 332/-5032 (-4700)
The resulting vmlinux is ~66KiB smaller, though the resulting Image size
is unchanged due to padding and alignment:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 137508344 Jan 17 14:11 vmlinux-after
| -rwxr-xr-x 1 mark mark 137575440 Jan 17 13:49 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rw-r--r-- 1 mark mark 38777344 Jan 17 14:11 Image-after
| -rw-r--r-- 1 mark mark 38777344 Jan 17 13:49 Image-before
Prior to this patch we did not verify the state of ICC_CTLR_EL1.PMHE on
secondary CPUs. As of this patch this is verified by the cpufeature code
when using GIC priority masking (i.e. when using pseudo-NMIs).
Note that since commit:
7e3a57fa6ca831fa ("arm64: Document ICC_CTLR_EL3.PMHE setting requirements")
... Documentation/arm64/booting.rst specifies:
| - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
| all CPUs the kernel is executing on, and must stay constant
| for the lifetime of the kernel.
... so that should not adversely affect any compliant systems, and as
we'll only check for the absense of PMHE when using pseudo-NMIs, this
will only fire when such mismatch will adversely affect the system.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Use the irq_domain_alloc_irqs() wrapper instead of the full
__irq_domain_alloc_irqs() interface, which was only intended for some
legacy (x86) use cases.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221213140844.15470-2-johan+linaro@kernel.org
|
|
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/755c4083122071bb27aa8ed5d98156a07bb63a39.1667336095.git.christophe.jaillet@wanadoo.fr
|
|
Fix typo in comment (cleanip/cleanup).
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1664332767-6909-1-git-send-email-daizhiyuan@phytium.com.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
|
|
* irq/misc-5.20:
: .
: Misc IRQ changes for 5.20:
:
: - Let irq_set_chip_handler_name_locked() take a const struct irq_chip *
:
: - Convert the ocelot irq_chip to being immutable (depends on the above)
:
: - Tidy-up the NOMAP irqdomain API variant
:
: - Teach action_show() to use for_each_action_of_desc()
:
: - Check ioremap() return value in the MIPS GIC driver
:
: - Move MMP driver init function declarations into the common .h
:
: - The obligatory typo fixes
: .
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
pinctrl: ocelot: Make irq_chip immutable
genirq: Allow irq_set_chip_handler_name_locked() to take a const irq_chip
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In an unfortunate departure from the ACPI spec, the LoongArch
architecture split its GSI space across multiple interrupt
controllers.
In order to be able to reuse the core code and prevent
architectures from reinventing an already square wheel, offer
the arch code the ability to register a dispatcher function
that will return the domain fwnode for a given GSI.
The ARM GIC drivers are updated to support this (with a single
domain, as intended).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1658314292-35346-3-git-send-email-lvjianmin@loongson.cn
|
|
The double `the' is duplicated in line 1786, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220715051258.28889-1-wangborong@cdjrlc.com
|
|
Due to a silly oversight on my part, making the simple switch to
of_io_request_and_map() in the DT path inadvertently introduced
divergent behaviour, whereby failng to request an iomem region now
becomes fatal for DT, vs. being silently ignored for ACPI.
Refactor a bit harder, so that request errors are non-fatal in both
paths as intended, but also consistently reported as well.
Reported-by: Matt Ranostay <mranostay@ti.com>
Fixes: 2b2cd74a06c3 ("irqchip/gic-v3: Claim iomem resources")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5f2b57a0131f3082fae9d3002d360bf784ccb092.1655387206.git.robin.murphy@arm.com
|
|
of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com
|
|
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
When kcalloc fails, it missing of_node_put() and results in refcount
leak. Fix this by goto out_put_node label.
Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com
|
|
* irq/gic-v3-nmi-fixes-5.19:
: .
: GICv3 pseudo-NMI fixes from Mark Rutland:
:
: "These patches fix a couple of issues with the way GICv3 pseudo-NMIs are
: handled:
:
: * The first patch adds a barrier we missed from NMI handling due to an
: oversight.
:
: * The second patch refactors some logic around reads from ICC_IAR1_EL1
: and adds commentary to explain what's going on.
:
: * The third patch descends into madness, reworking gic_handle_irq() to
: consistently manage ICC_PMR_EL1 + DAIF and avoid cases where these can
: be left in an inconsistent state while softirqs are processed."
: .
irqchip/gic-v3: Fix priority mask handling
irqchip/gic-v3: Refactor ISB + EOIR at ack time
irqchip/gic-v3: Ensure pseudo-NMIs have an ISB between ack and handling
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When a kernel is built with CONFIG_ARM64_PSEUDO_NMI=y and pseudo-NMIs
are enabled at runtime, GICv3's gic_handle_irq() can leave DAIF and
ICC_PMR_EL1 in an unexpected state in some cases, breaking subsequent
usage of local_irq_enable() and resulting in softirqs being run with
IRQs erroneously masked (possibly resulting in deadlocks).
This can happen when an IRQ exception is taken from a context where
regular IRQs were unmasked, and either:
(1) ICC_IAR1_EL1 indicates a special INTID (e.g. as a result of an IRQ
being withdrawn since the IRQ exception was taken).
(2) ICC_IAR1_EL1 and ICC_RPR_EL1 indicate an NMI was acknowledged.
When an NMI is taken from a context where regular IRQs were masked,
there is no problem.
When CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y, this can be detected with
perf, e.g.
| # ./perf record -a -g -e cycles:k ls -alR / > /dev/null 2>&1
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 14 at arch/arm64/include/asm/irqflags.h:32 arch_local_irq_enable+0x4c/0x6c
| Modules linked in:
| CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 5.18.0-rc5-00004-g876c38e3d20b #12
| Hardware name: linux,dummy-virt (DT)
| pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : arch_local_irq_enable+0x4c/0x6c
| lr : __do_softirq+0x110/0x5d8
| sp : ffff8000080bbbc0
| pmr_save: 000000f0
| x29: ffff8000080bbbc0 x28: ffff316ac3a6ca40 x27: 0000000000000000
| x26: 0000000000000000 x25: ffffa04611c06008 x24: ffffa04611c06008
| x23: 0000000040400005 x22: 0000000000000200 x21: ffff8000080bbe20
| x20: ffffa0460fe10320 x19: 0000000000000009 x18: 0000000000000000
| x17: ffff91252dfa9000 x16: ffff800008004000 x15: 0000000000004000
| x14: 0000000000000028 x13: ffffa0460fe17578 x12: ffffa0460fed4294
| x11: ffffa0460fedc168 x10: ffffffffffffff80 x9 : ffffa0460fe10a70
| x8 : ffffa0460fedc168 x7 : 000000000000b762 x6 : 00000000057c3bdf
| x5 : ffff8000080bbb18 x4 : 0000000000000000 x3 : 0000000000000001
| x2 : ffff91252dfa9000 x1 : 0000000000000060 x0 : 00000000000000f0
| Call trace:
| arch_local_irq_enable+0x4c/0x6c
| __irq_exit_rcu+0x180/0x1ac
| irq_exit_rcu+0x1c/0x44
| el1_interrupt+0x4c/0xe4
| el1h_64_irq_handler+0x18/0x24
| el1h_64_irq+0x74/0x78
| smpboot_thread_fn+0x68/0x2c0
| kthread+0x124/0x130
| ret_from_fork+0x10/0x20
| irq event stamp: 193241
| hardirqs last enabled at (193240): [<ffffa0460fe10a9c>] __do_softirq+0x10c/0x5d8
| hardirqs last disabled at (193241): [<ffffa0461102ffe4>] el1_dbg+0x24/0x90
| softirqs last enabled at (193234): [<ffffa0460fe10e00>] __do_softirq+0x470/0x5d8
| softirqs last disabled at (193239): [<ffffa0460fea9944>] __irq_exit_rcu+0x180/0x1ac
| ---[ end trace 0000000000000000 ]---
The necessary manipulation of DAIF and ICC_PMR_EL1 depends on the
interrupted context, but the structure of gic_handle_irq() makes this
also depend on whether the GIC reports an IRQ, NMI, or special INTID:
* When the interrupted context had regular IRQs masked (and hence the
interrupt must be an NMI), the entry code performs the NMI
entry/exit and gic_handle_irq() should return with DAIF and
ICC_PMR_EL1 unchanged.
This is handled correctly today.
* When the interrupted context had regular IRQs unmasked, the entry code
performs IRQ entry/exit, but expects gic_handle_irq() to always update
ICC_PMR_EL1 and DAIF.IF to unmask NMIs (but not regular IRQs) prior to
returning (which it must do prior to invoking any regular IRQ
handler).
This unbalanced calling convention is necessary because we don't know
whether an NMI has been taken until acknowledged by a read from
ICC_IAR1_EL1, and so we need to perform the read with NMI masked in
case an NMI has been taken (and needs to be handled with NMIs masked).
Unfortunately, this is not handled consistently:
- When ICC_IAR1_EL1 reports a special INTID, gic_handle_irq() returns
immediately without manipulating ICC_PMR_EL1 and DAIF.
- When RPR_EL1 indicates an NMI, gic_handle_irq() calls
gic_handle_nmi() to invoke the NMI handler, then returns without
manipulating ICC_PMR_EL1 and DAIF.
- For regular IRQs, gic_handle_irq() manipulates ICC_PMR_EL1 and DAIF
prior to invoking the IRQ handler.
There were related problems with special INTID handling in the past,
where if an exception was taken from a context with regular IRQs masked
and ICC_IAR_EL1 reported a special INTID, gic_handle_irq() would
erroneously unmask NMIs in NMI context permitted an unexpected nested
NMI. That case specifically was fixed by commit:
a97709f563a078e2 ("irqchip/gic-v3: Do not enable irqs when handling spurious interrups")
... but unfortunately that commit added an inverse problem, where if an
exception was taken from a context with regular IRQs *unmasked* and
ICC_IAR_EL1 reported a special INTID, gic_handle_irq() would erroneously
fail to unmask NMIs (and consequently regular IRQs could not be
unmasked during softirq processing). Before and after that commit, if an
NMI was taken from a context with regular IRQs unmasked gic_handle_irq()
would not unmask NMIs prior to returning, leading to the same problem
with softirq handling.
This patch fixes this by restructuring gic_handle_irq(), splitting it
into separate irqson/irqsoff helper functions which consistently perform
the DAIF + ICC_PMR1_EL1 manipulation based upon the interrupted context,
regardless of the event indicated by ICC_IAR1_EL1.
The special INTID handling is moved into the low-level IRQ/NMI handler
invocation helper functions, so that early returns don't prevent the
required manipulation of DAIF + ICC_PMR_EL1.
Fixes: f32c926651dcd168 ("irqchip/gic-v3: Handle pseudo-NMIs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-4-mark.rutland@arm.com
|
