summaryrefslogtreecommitdiff
path: root/drivers/media/i2c/ccs/ccs-core.c
AgeCommit message (Collapse)Author
2022-08-16i2c: Make remove callback return voidUwe Kleine-König
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-13media: ccs-core.c: fix failure to call clk_disable_unprepareHans Verkuil
Fixes smatch warning: drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: ccs: Use unsigned int as index to an arraySakari Ailus
Use an unsigned int to index an array instead of a signed one. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: ccs: Use %u for printing unsigned values, remove extra debug printSakari Ailus
Use %u for printing unsigned integer or u32 values. In a lot of cases %d was being used instead. Also remove an extra debug print --- the number of lanes is already printed by V4L2 when parsing fwnode endpoints when dynamic debug is enabled. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-04media: i2c: ccs: Drop unused includeLinus Walleij
The driver already includes <linux/gpio/consumer.h> which is what it uses, drop the legacy <linux/gpio.h> include. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2021-11-15media: i2c: ccs: replace snprintf in show functions with sysfs_emitQing Wang
show() should not use snprintf() when formatting the value to be returned to user space. Fix the following coccicheck warning: drivers/media/i2c/ccs/ccs-core.c:3761: WARNING: use scnprintf or sprintf. Signed-off-by: Qing Wang <wangqing@vivo.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-04media: ccs: Implement support for manual LP controlSakari Ailus
Use the pre_streamon callback to transition the transmitter to either LP-11 or LP-111 mode if supported by the sensor. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-04media: i2c: use DEVICE_ATTR_RO() helper macroZhen Lei
Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which is simpler and more readable. Due to the name of the read function of the sysfs attribute is normalized, there is a natural association. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19media: i2c: ccs-core: use pm_runtime_resume_and_get()Mauro Carvalho Chehab
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-10media: i2c: ccs-core: fix pm_runtime_get_sync() usage countMauro Carvalho Chehab
The pm_runtime_get_sync() internally increments the dev->power.usage_count without decrementing it, even on errors. There is a bug at ccs_pm_get_init(): when this function returns an error, the stream is not started, and RPM usage_count should not be incremented. However, if the calls to v4l2_ctrl_handler_setup() return errors, it will be kept incremented. At ccs_suspend() the best is to replace it by the new pm_runtime_resume_and_get(), introduced by: commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") in order to properly decrement the usage counter automatically, in the case of errors. Fixes: 96e3a6b92f23 ("media: smiapp: Avoid maintaining power state information") Cc: stable@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-10media: i2c: ccs-core: return the right error code at suspendMauro Carvalho Chehab
If pm_runtime resume logic fails, return the error code provided by it, instead of -EAGAIN, as, depending on what caused it to fail, it may not be something that would be recovered. Fixes: cbba45d43631 ("[media] smiapp: Use runtime PM") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: v4l: fwnode: Rename v4l2_async_register_subdev_sensor_commonSakari Ailus
Rename v4l2_async_register_subdev_sensor_common as v4l2_async_register_subdev_sensor. This is a part of the effort to make the long names present in V4L2 fwnode and async frameworks shorter. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: ccs: Fix sub-device functionSakari Ailus
Fix sub-device function for the pixel array and the scaler. It seems that the pixel array had gotten assigned as SCALER whereas the scaler had CAM_SENSOR function. Fix this by setting the pixel array function to CAM_SENSOR and that of scaler to SCALER. Fixes: 9ec2ac9bd0f9 ("media: ccs: Give all subdevs a function") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Switch from standard integer types to kernel onesSakari Ailus
The preferred integer types in the kernel are the Linux specific ones, switch from standard C types to u32 and alike. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Support and default to auto PHY controlSakari Ailus
CCS supports three variants of PHY timing control, auto, UI based and manual. The driver previously assumed UI based control that requires updating the link rate to the sensor. Now default to automatic control instead, and only write the link rate to the sensor in UI mode. If neither auto or UI control is supported, return an error in probe. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Add a sanity check for external clock frequencySakari Ailus
The driver depends on the external clock frequency. Add a sanity check for the frequency, by returning an error from probe if it's zero. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Hardware requires a delay after starting the clock of lifting resetSakari Ailus
A CCS compliant device requires a delay before the first I²C transaction after pulling xshutdown up or starting the external clock. This is what the driver does. However, if neither is actually there, there's no need for the delay. This also has the effect of removing an unnecessary delay on ACPI systems where ACPI is responsible for the power-up sequence. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Wait until software reset is doneSakari Ailus
Verify the software reset has been completed until proceeding. The spec does not guarantee a delay but presumably 100 ms should be enough. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Only do software reset if we have no hardware resetSakari Ailus
The driver always used software reset after the sensor's power sequence that includes a hardware reset if we have a reset GPIO. Do not use software reset if we just brought the sensor up from hardware reset state. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Don't change the I²C address just for software resetSakari Ailus
The sensor's address was changed before resetting and changing the address again. Don't do it before reset as it's useless. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Get the endpoint by port rather than any next endpointSakari Ailus
Get the first endpoint from port 0 instead of the next one, whatever it might be. There are no other ports so there's no functional change. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Add shading correction and luminance correction level controlsSakari Ailus
Add controls for supporting lens shading correction, including colour shading and luminance correction level. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Add support for alternate analogue global gainSakari Ailus
The CCS spec defines an alternative implementation for global analogue gain. Add support for that in the driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Add support for analogue gain coefficient controlsSakari Ailus
Add four controls for reading CCS analogue gain coefficients. The values are constants that are device specific. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Only add analogue gain control if the device supports itSakari Ailus
Some devices do not implement analogue gain this way. Only add the control when a device does have the support. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Remove analogue gain fieldSakari Ailus
The analogue gain control was stored to the device specific struct but was never used. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Add support for old-style SMIA digital gainSakari Ailus
SMIA only has per-component digital gain. Add support for it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Add digital gain supportSakari Ailus
CCS supports global (all-component) digital gain. Add support for it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Add support for obtaining C-PHY configuration from firmwareSakari Ailus
Try parsing the firmware also as C-PHY. Do this only after D-PHY as older firmware may not explicitly specify bus-type in which case D-PHY is the default. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Add support for DDR OP SYS and OP PIX clocksSakari Ailus
Support dual data rate operational system and pixel clocks by conveying the flags to the PLL calculator and updating how the link rate is calculated. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Dual PLL supportSakari Ailus
Add support for sensors that either require dual PLL or support single or dual PLL but use dual PLL as default. Use sensor default configuration for sensors that support both modes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Check for derating and overrating, support non-derating sensorsSakari Ailus
Some sensors support derating (VT domain speed faster than OP) or overrating (VT domain speed slower than OP). While this was supported for the driver, the hardware support for the feature was never verified. Do that now, and for those devices without that support, VT and OP speeds have to match. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support flexible OP PLL pixel clock dividerSakari Ailus
Flexible OP PLL pixel clock divider allows a higher OP pixel clock than what the bus can transfer. This generally makes it easier to select pixel clock dividers. This changes how the pixel rate on the bus and minimum VT divisor are calculated, as the pixel rate is no longer directly determined by the OP pixel clock and the number of the lanes. Also add a sanity check for sensors that do not support flexible OP PLL pixel clock divider. This could have caused the PLL calculator to come up with an invalid configuration for those devices. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Support two cycles per pixel on OP domainSakari Ailus
The l parameter defines the number of clock cycles to process a single pixel per OP lane. It is calculated based on a new register op_bits_per_lane. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support for extended input PLL clock dividerSakari Ailus
CCS allows odd PLL dividers other than 1, granted that the corresponding capability bit is set. Support this both in the PLL calculator and the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support for decoupled OP domain calculationSakari Ailus
Add support for decoupled OP domain clock calculation. This means that the number of VT and OP domain clocks are no longer dependent on the number of CSI-2 lanes in the lane speed mode. The support also replaces the existing quirk flag to calculate OP domain clocks per lane. Also support decoupled OP domain calculation in the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Add support for lane speed modelSakari Ailus
Convey the relevant PLL flags to the PLL calculator. Also the lane speed model affects how the link rate is calculated on the CSI-2 bus, as the rate is total of all lanes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Differentiate between CSI-2 D-PHY and C-PHYSakari Ailus
Differentiate between CSI-2 D-PHY and C-PHY. This does not yet include support for C-PHY. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Split limits and PLL configuration into front and back partsSakari Ailus
The CCS spec supports a lot of variation in the PLL. Split the PLL in front and back parts to better prepare for supporting it. Also use CCS compliant naming for IP and OP PLL frequencies (i.e. include "clk" in the name). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Fix return value from probeSakari Ailus
rval wasn't set, resulting in probe returning zero instead of an error. Fixes: de10c1619c48 ("[media] smiapp: Get clock rate if it's not available through DT") Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: avoid printing an uninitialized variableArnd Bergmann
There is no intialization for the 'reg' variable, so printing it produces undefined behavior as well as a compile-time warning: drivers/media/i2c/ccs/ccs-core.c:314:49: error: variable 'reg' is uninitialized when used here [-Werror,-Wuninitialized] "0x%8.8x %s pixels: %d %s (pixelcode %u)\n", reg, Remove the variable and stop printing it. Fixes: fd9065812c7b ("media: smiapp: Obtain frame descriptor from CCS limits") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Use all regulatorsSakari Ailus
Use regulators vio and vcore besides vana. The regulators were always there but on many boards they've been hard wired. Control them explicitly now. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Remove unnecessary delays from power-up sequenceSakari Ailus
SMIA nor CCS need these delays; remove them. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Use longer pre-I²C sleep for CCS compliant devicesSakari Ailus
Longer idle period is required on I²C bus before the first transaction after lifting xshutdown. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Wrap long lines, unwrap short onesSakari Ailus
Over the years (and renaming) some lines that may well be wrapped ended up being over 80 characters, likewise there are shorter lines that can be merged. Do that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Clean up runtime PM usageSakari Ailus
If pm_runtime_get_sync() fails, there's no need to set the device active again. Also, in the same case to return the usage_count to zero, pm_runtime_put_noidle() is enough. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add support for manufacturer regs from sensor and module filesSakari Ailus
Write manufacturer specific registers (MSRs) from file to the sensor on sensor power-on. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Change my e-mail addressSakari Ailus
Use my @linux.intel.com e-mail address in the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: smiapp-pll: Rename as ccs-pllSakari Ailus
MIPI CCS replaces SMIA and SMIA++ as the current standard. CCS brings new features while existing functionality will be supported. Rename the smiapp-pll as ccs-pll accordingly. Also add Intel copyright to the files. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-25 06:15:21 +0000