| Age | Commit message (Collapse) | Author |
|---|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all can drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909072742.381003-2-u.kleine-koenig@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The current at91_can driver uses NAPI to handle RX'ed CAN frames, the
RX IRQ is disabled and a NAPI poll is scheduled. Then in
at91_poll_rx() the RX'ed CAN frames are tried to read in order from
the device.
This approach has 2 drawbacks:
- Under high system load it might take too long from the initial RX
IRQ to the NAPI poll function to run. This causes RX buffer
overflows.
- The algorithm to read the CAN frames in order is not bullet proof
and may fail under certain use cases/system loads.
The rx-offload helper fixes these problems by reading the RX'ed CAN
frames in the interrupt handler and adding it to a list sorted by RX
timestamp. This list of RX'ed SKBs is then passed to the networking
stack via NAPI.
Convert the RX path to rx-offload, pass all CAN error frames with
can_rx_offload_queue_timestamp().
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-27-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a preparation patch to convert the driver to make use of the
rx-offload helper. With rx-offload the received CAN frames are sorted
by their timestamp. Regular CAN RX'ed and TX'ed CAN frames are
timestamped by the hardware. Error events are not.
Introduce a new function at91_alloc_can_err_skb() the allocates an
error SKB and reads the current timestamp from the controller.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-26-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since 3e5c291c7942 ("can: add CAN_ERR_CNT flag to notify availability
of error counter") there is a dedicated flag to inform the user space,
that there are CAN error counters in the CAN error frame.
In case the device is not in bus off mode, send the error counters to
user space and set CAN_ERR_CNT.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-25-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_bus_off()
The driver implements a hand crafted CAN state handling. Update the
driver to make use of can_change_state(), introduced in ("can: dev:
Consolidate and unify state change handling")
Also switch from hand crafted CAN bus off handling to can_bus_off():
In case of a bus off, abort all pending TX requests, switch off the
device and let can_bus_off() handle the device restart.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-24-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The at91 CAN controller automatically recovers from bus-off after 128
occurrences of 11 consecutive recessive bits.
After an auto-recovered bus-off, the error counters no longer reflect
this fact. On the sam9263 the state bits in the SR register show the
current state (based on the current error counters), while on sam9x5
and newer SoCs these bits are latched.
Take any latched bus-off information from the SR register into account
when calculating the CAN new state, to start the standard CAN bus off
handling.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-23-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
On the sam9263 the SR bits for bus off, error passive, warning limit,
and error active are not latched and reflect the current status of the
controller. On the sam9x5 and newer SoCs these bits are latched.
To simplify the code, use can_state_get_by_berr_counter() to get the
state of the controller regardless of the SoC version.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-22-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a cleanup patch, no functional change intended.
The function at91_irq_err() only handles the CAN line errors, so
rename it accordingly to at91_irq_err_line().
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-21-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a cleanup patch, no functional change intended. As
at91_irq_err_frame() is called from the IRQ handler move it in front
of the IRQ handler next to at91_irq_err().
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-20-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a preparation patch to convert the driver to the rx-offload
helper. In rx-offload RX, TX-done and CAN error handling are done in
the IRQ handler, SKB are pushed to the network stack in the NAPI poll
function.
Move the CAN frame error handling from the NAPI function at91_poll()
to the IRQ handler at91_poll(). To reflect this change, rename
at91_poll_err() to at91_irq_err_frame().
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-19-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
at91_poll_err() allocates a can error SKB, to inform the user space
about the CAN error. Then it fills the SKB with information the error
information and increases the net device error stats.
In case no SBK can be allocated (e.g. due to an OOM) or the NAPI quota
is 0 the function is left early and no stats are updated. This is not
helpful to the user, as there is no information about the faulty CAN
bus.
Increase the error stats even if no quota is left or no SKB can be
allocated.
While there treat No-Acknowledgment as a bus error, too.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-18-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a preparation patch for the cleanup of at91_poll_err(). Fold
at91_poll_err_frame() into at91_poll_err() so that it can be easier
modified.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-17-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for Linux-PHY based CAN transceivers.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-16-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
an error
If request_irq() fails, forward the return value.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-15-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In at91_chip_start() first all IRQs are disabled, they do not have to
be disabled again at the end of the function before the requested IRQs
are enabled.
Remove the 2nd disable of all IRQs at the end of the function.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-14-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This message isn't really helpful for the general reader of the kernel
logs, so should not be printed with info level.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-13-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
To increase code readability, use the same naming of the counters for
the TX FIFO as in the other drivers implementing the same algorithm.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-12-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since 6388b3961420 ("can: at91_can: add support for the AT91SAM9X5
SOCs") the number of mailboxes used for RX and TX is no longer
constant, but depends on the IP core used.
Remove the fixed number of mailboxes from the comment.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-11-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add more register definitions found in the data sheet.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-10-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use FIELD_PREP() to access the individual fields of the MCR register.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-9-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use FIELD_PREP() to access the individual fields of the MSR register.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-8-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use FIELD_PREP() and FIELD_GET() to access the individual fields of
the MID register.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-7-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use FIELD_PREP() to access the individual fields of the MMR register.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-6-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use FIELD_GET() to access the individual fields of the ECR register.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-5-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use FIELD_PREP() to access the individual fields of the BR register.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-4-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Improve code readability by removing one level of indention.
If a mailbox is not ready, continue the loop early.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-3-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert the driver to use a consistent indention of one space after
defines and in enums. That makes it easier to add new defines, which
will be done in the coming patches.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-2-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230512212725.143824-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only
mode") the priv->ctrlmode element is read even on virtual CAN
interfaces that do not create the struct can_priv at startup. This
out-of-bounds read may lead to CAN frame drops for virtual CAN
interfaces like vcan and vxcan.
This patch mainly reverts the original commit and adds a new helper
for CAN interface drivers that provide the required information in
struct can_priv.
Fixes: a6d190f8c767 ("can: skb: drop tx skb if in listen only mode")
Reported-by: Dariusz Stojaczyk <Dariusz.Stojaczyk@opensynergy.com>
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Max Staudt <max@enpas.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221102095431.36831-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org # 6.0.x
[mkl: patch pch_can, too]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, some CAN drivers support hardware timestamping, some do
not. But userland has no method to query which features are supported
(aside maybe of getting RX messages and observe whether or not
hardware timestamps stay at zero).
The canonical way for a network driver to advertised what kind of
timestamping it supports is to implement ethtool_ops::get_ts_info().
This patch only targets the CAN drivers which *do not* support
hardware timestamping. For each of those CAN drivers, implement the
get_ts_info() using the generic ethtool_op_get_ts_info().
This way, userland can do:
| $ ethtool --show-time-stamping canX
to confirm the device timestamping capacities.
N.B. the drivers which support hardware timestamping will be migrated
in separate patches.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr
[mkl: mscan: add missing mscan_ethtool_ops]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since commit 30f3b42147ba6f ("can: mark led trigger as broken") the
CAN specific LED support was disabled and marked as BROKEN. As the
common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work
now the code can be removed as preparation for a CAN netdevice Kconfig
rework.
Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.net
Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
[mkl: remove led.h from MAINTAINERS]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
We want to remove the weight argument from the basic version of the
netif_napi_add() call. Move all the callers in drivers/net/can that
pass a custom weight (i.e. not NAPI_POLL_WEIGHT or 64) to the
netif_napi_add_weight() API.
Link: https://lore.kernel.org/all/20220517002345.1812104-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.
As such, net_device_stats::tx_bytes should not be increased when
sending RTR frames.
The function can_get_echo_skb() already returns the correct length,
even for RTR frames (c.f. [1]). However, for historical reasons, the
drivers do not use can_get_echo_skb()'s return value and instead, most
of them store a temporary length (or dlc) in some local structure or
array. Using the return value of can_get_echo_skb() solves the
issue. After doing this, such length/dlc fields become unused and so
this patch does the adequate cleaning when needed.
This patch fixes all the CAN drivers.
Finally, can_get_echo_skb() is decorated with the __must_check
attribute in order to force future drivers to correctly use its return
value (else the compiler would emit a warning).
[1] commit ed3320cec279 ("can: dev: __can_get_echo_skb():
fix real payload length return value for RTR frames")
Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
[mkl: add conversion for grcan]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.
As such, net_device_stats::rx_bytes should not be increased for the
RTR frames.
This patch fixes all the CAN drivers.
Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").
For this reason, it makes no sense to increment the rx_packets and
rx_bytes fields of struct net_device_stats because no actual payload
were transmitted on the wire.
This patch fixes all the CAN drivers.
Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Ludovic Desroches <ludovic.desroches@microchip.com>
CC: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
CC: Maxime Ripard <mripard@kernel.org>
CC: Chen-Yu Tsai <wens@csie.org>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
CC: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
CC: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The sysfs show() functions must not use snprintf() when formatting the
value to be returned to user space.
Fix the following coccicheck warning:
| drivers/net/can/at91_can.c:1185: WARNING: use scnprintf or sprintf.
| drivers/net/can/janz-ican3.c:1834: WARNING: use scnprintf or sprintf.
|
| Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Link: https://lore.kernel.org/all/1634280624-4816-1-git-send-email-wangqing@vivo.com
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Networking block comments don't use an empty /* line,
use /* Comment...
Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.
This patch fixes the comments style issues.
Link: https://lore.kernel.org/r/1624096589-13452-9-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
According to the chackpatch.pl, no space before tabs.
Link: https://lore.kernel.org/r/1624096589-13452-8-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Braces {} should be used on all arms of this statement.
Link: https://lore.kernel.org/r/1624096589-13452-7-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Alignment should match open parenthesis.
Link: https://lore.kernel.org/r/1624096589-13452-6-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch uses the BIT macro for setting individual bits,
to fix the following checkpatch.pl issue:
CHECK: Prefer using the BIT macro.
Link: https://lore.kernel.org/r/1624096589-13452-5-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Macros with complex values should be enclosed in parentheses
Link: https://lore.kernel.org/r/1624096589-13452-4-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes the checkpatch error about missing a blank line
after declarations.
Link: https://lore.kernel.org/r/1624096589-13452-3-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch removes some redundant blank lines.
Link: https://lore.kernel.org/r/1624096589-13452-2-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use DEVICE_ATTR_RW() helper macro instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.
Link: https://lore.kernel.org/r/20210603100233.11877-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes the following clang warning, by marking the functions
as maybe unused. gcc doesn't complain about unused inline functions.
| drivers/net/can/at91_can.c:178:1: warning: unused function 'at91_is_sam9X5' [-Wunused-function]
| AT91_IS(9X5);
| ^
| drivers/net/can/at91_can.c:172:19: note: expanded from macro 'AT91_IS'
| static inline int at91_is_sam##_model(const struct at91_priv *priv) \
| ^
| <scratch space>:66:1: note: expanded from here
| at91_is_sam9X5
| ^
Link: https://lore.kernel.org/r/20210514153741.1958041-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.
To avoid to calculate this length twice, extend can_get_echo_skb() to return
that value. Convert all users of this function, too.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add a frame_len argument to can_put_echo_skb() which is used to save length of
the CAN frame into field frame_len of struct can_skb_priv so that it can be
later used after transmission completion. Convert all users of this function,
too.
Drivers which implement BQL call can_put_echo_skb() with the output of
can_skb_get_frame_len(skb) and drivers which do not simply pass zero as an
input (in the same way that NULL would be given to can_get_echo_skb()). This
way, we have a nice symmetry between the two echo functions.
Link: https://lore.kernel.org/r/20210111061335.39983-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-13-mkl@pengutronix.de
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
|
|
The naming of can_dlc as element of struct can_frame and also as variable
name is misleading as it claims to be a 'data length CODE' but in reality
it always was a plain data length.
With the indroduction of a new 'len' element in struct can_frame we can now
remove can_dlc as name and make clear which of the former uses was a plain
length (-> 'len') or a data length code (-> 'dlc') value.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net
[mkl: gs_usb: keep struct gs_host_frame::can_dlc as is]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The get_can_dlc() macro is used to ensure the payload length information of
the Classical CAN frame to be max 8 bytes (the CAN_MAX_DLEN).
Rename the macro and use the correct constant in preparation of the len/dlc
cleanup for Classical CAN frames.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201110101852.1973-3-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
