| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
|
|
In switchdev mode the uplink VSI should receive all unmatched packets,
including VLANs. Therefore, VLAN pruning should be disabled if uplink is
in switchdev mode. It is already being done in ice_eswitch_setup_env(),
however the addition of ice_up() in commit 44ba608db509 ("ice: do
switchdev slow-path Rx using PF VSI") caused VLAN pruning to be
re-enabled after disabling it.
Add a check to ice_set_vlan_filtering_features() to ensure VLAN
filtering will not be enabled if uplink is in switchdev mode. Note that
ice_is_eswitch_mode_switchdev() is being used instead of
ice_is_switchdev_running(), as the latter would only return true after
the whole switchdev setup completes.
Fixes: 44ba608db509 ("ice: do switchdev slow-path Rx using PF VSI")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 608a5c05c39b ("virtchnl: support queue rate limit and quanta
size configuration") introduced new virtchnl ops:
- get_qos_caps
- cfg_q_bw
- cfg_q_quanta
New ops were added to ice_virtchnl_dflt_ops, in
commit 015307754a19 ("ice: Support VF queue rate limit and quanta
size configuration"), but not to the ice_virtchnl_repr_ops. Because
of that, if we get one of those messages in switchdev mode we end up
with NULL pointer dereference:
[ 1199.794701] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1199.794804] Workqueue: ice ice_service_task [ice]
[ 1199.794878] RIP: 0010:0x0
[ 1199.795027] Call Trace:
[ 1199.795033] <TASK>
[ 1199.795039] ? __die+0x20/0x70
[ 1199.795051] ? page_fault_oops+0x140/0x520
[ 1199.795064] ? exc_page_fault+0x7e/0x270
[ 1199.795074] ? asm_exc_page_fault+0x22/0x30
[ 1199.795086] ice_vc_process_vf_msg+0x6e5/0xd30 [ice]
[ 1199.795165] __ice_clean_ctrlq+0x734/0x9d0 [ice]
[ 1199.795207] ice_service_task+0xccf/0x12b0 [ice]
[ 1199.795248] process_one_work+0x21a/0x620
[ 1199.795260] worker_thread+0x18d/0x330
[ 1199.795269] ? __pfx_worker_thread+0x10/0x10
[ 1199.795279] kthread+0xec/0x120
[ 1199.795288] ? __pfx_kthread+0x10/0x10
[ 1199.795296] ret_from_fork+0x2d/0x50
[ 1199.795305] ? __pfx_kthread+0x10/0x10
[ 1199.795312] ret_from_fork_asm+0x1a/0x30
[ 1199.795323] </TASK>
Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix incorrect PHY timestamp extraction for ETH56G.
It's better to use FIELD_PREP() than manual shift.
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To check if PHY Clock Recovery mechanic is available for a device, there
is a need to verify if given PHY is available within the netlist, but the
netlist node type used for the search is wrong, also the search context
shall be specified.
Modify the search function to allow specifying the context in the
search.
Use the PHY node type instead of CLOCK CONTROLLER type, also use proper
search context which for PHY search is PORT, as defined in E810
Datasheet [1] ('3.3.8.2.4 Node Part Number and Node Options (0x0003)' and
'Table 3-105. Program Topology Device NVM Admin Command').
[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true
Fixes: 91e43ca0090b ("ice: fix linking when CONFIG_PTP_1588_CLOCK=n")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000)
For ice:
Mateusz refactors and adds additional SerDes configuration values to be
output.
Przemek refactors processing of DDP and adds support for a flag field in
the DDP's signature segment header.
Joe Damato adds support for persistent NAPI config.
Brett adjusts setting of Tx promiscuous based on unicast/multicast
setting.
Jake moves setting of pf->supported_rxdids to occur directly after DDP
load and changes a small struct to use stack memory.
Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue.
For ixgbe:
Diomidis Spinellis removes a circular dependency.
For igc:
Vitaly removes an unneeded autoneg parameter.
For igb:
Johnny Park fixes a couple of typos.
For igbvf:
Wander Lairson Costa removes an unused spinlock.
For e1000:
Joe Damato adds RTNL lock to some calls where it is expected to be held.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000: Hold RTNL when e1000_down can be called
igbvf: remove unused spinlock
igb: Fix 2 typos in comments in igb_main.c
igc: remove autoneg parameter from igc_mac_info
ixgbe: Break include dependency cycle
ice: Unbind the workqueue
ice: use stack variable for virtchnl_supported_rxdids
ice: initialize pf->supported_rxdids immediately after loading DDP
ice: only allow Tx promiscuous for multicast
ice: Add support for persistent NAPI config
ice: support optional flags in signature segment header
ice: refactor "last" segment of DDP pkg
ice: extend dump serdes equalizer values feature
ice: rework of dump serdes equalizer values feature
====================
Link: https://patch.msgid.link/20241113185431.1289708-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a similar fashion to ndo_fdb_add, which was covered in the previous
patch, add the bool *notified argument to ndo_fdb_del. Callees that send a
notification on their own set the flag to true.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently when FDB entries are added to or deleted from a VXLAN netdevice,
the VXLAN driver emits one notification, including the VXLAN-specific
attributes. The core however always sends a notification as well, a generic
one. Thus two notifications are unnecessarily sent for these operations. A
similar situation comes up with bridge driver, which also emits
notifications on its own:
# ip link add name vx type vxlan id 1000 dstport 4789
# bridge monitor fdb &
[1] 1981693
# bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1
de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent
de:ad:be:ef:13:37 dev vx self permanent
In order to prevent this duplicity, add a paremeter to ndo_fdb_add,
bool *notified. The flag is primed to false, and if the callee sends a
notification on its own, it sets it to true, thus informing the core that
it should not generate another notification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice workqueue doesn't seem to rely on any CPU locality and should
therefore be able to run on any CPU. In practice this is already
happening through the unbound ice_service_timer that may fire anywhere
and queue the workqueue accordingly to any CPU.
Make this official so that the ice workqueue is only ever queued to
housekeeping CPUs on nohz_full.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_vc_query_rxdid() function allocates memory to store the
virtchnl_supported_rxdids structure used to communicate the bitmap of
supported RXDIDs to a VF.
This structure is only 8 bytes in size. The function must hold the
allocated length on the stack as well as the pointer to the structure which
itself is 8 bytes. Allocating this storage on the heap adds unnecessary
overhead including a potential error path that must be handled in case
kzalloc fails. Because this structure is so small, we're not saving stack
space. Additionally, because we must ensure that we free the allocated
memory, the return value from ice_vc_send_msg_to_vf() must also be saved in
the stack ret variable. Depending on compiler optimization, this means
allocating the 8-byte structure is requiring up to 16-bytes of stack
memory!
Simplify this function to keep the rxdid variable on the stack, saving
memory and removing a potential failure exit path from this function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The pf->supported_rxdids field is used to populate the list of valid RXDIDs
that a VF may use when negotiating VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC.
The set of supported RXDIDs is dependent on the DDP, and can be read from
the GLXFLXP_RXDID_FLAGS register. The PF needs to send this list to the
VF upon receiving the VIRTCHNL_OP_GET_SUPPORTED_RXDIDs. It also needs to
use this list to validate the requested descriptor ID from the VF when
programming the Rx queues.
A future update to support VF live migration will also want to validate
that the target VF can support the same descriptor ID when migrating.
Currently, pf->supported_rxdids is initialized inside the
ice_vc_query_rxdid() function. This means that it is only ever initialized
if at least one VF actually tries to negotiate
VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC. It is also unnecessarily re-initialized
every time the VF loads and requests the descriptor list. This worked
before because the PF only checks pf->suppported_rxdids when programming
the Rx queue if the VF actually negotiates the
VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC feature.
This will be problematic for VF live migration. We need the list of
supported Rx descriptor IDs when migrating. It is possible that no VF on
the target PF has ever actually issued a VIRTCHNL_OP_GET_SUPPORTED_RXDIDs.
Refactor the driver to initialize pf->supported_rxdids during driver
initialization after the DDP is loaded. This is simpler, avoids unnecessary
duplicate work, and avoids issues with the live migration process.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently when any VF is trusted and true promiscuous mode is enabled on
the PF, the VF will receive all unicast traffic directed to the device's
internal switch. This includes traffic external to the NIC and also from
other VSI (i.e. VFs). This does not match the expected behavior as
unicast traffic should only be visible from external sources in this
case. Disable the Tx promiscuous mode bits for unicast promiscuous mode.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use netif_napi_add_config to assign persistent per-NAPI config when
initializing NAPIs. This preserves NAPI config settings when queue
counts are adjusted.
Tested with an E810-2CQDA2 NIC.
Begin by setting the queue count to 4:
$ sudo ethtool -L eth4 combined 4
Check the queue settings:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8452,
'ifindex': 4,
'irq': 2782},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8451,
'ifindex': 4,
'irq': 2781},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Now, set the queue with NAPI ID 8451 to have a gro-flush-timeout of
1111:
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 8451, "gro-flush-timeout": 1111}'
None
Check that worked:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8452,
'ifindex': 4,
'irq': 2782},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 1111,
'id': 8451,
'ifindex': 4,
'irq': 2781},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Now reduce the queue count to 2, which would destroy the queue with NAPI
ID 8451:
$ sudo ethtool -L eth4 combined 2
Check the queue settings, noting that NAPI ID 8451 is gone:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Now, increase the number of queues back to 4:
$ sudo ethtool -L eth4 combined 4
Dump the settings, expecting to see the same NAPI IDs as above and for
NAPI ID 8451 to have its gro-flush-timeout set to 1111:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 4}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8452,
'ifindex': 4,
'irq': 2782},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 1111,
'id': 8451,
'ifindex': 4,
'irq': 2781},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8450,
'ifindex': 4,
'irq': 2780},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8449,
'ifindex': 4,
'irq': 2779}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
An optional flag field has been added to the signature segment header.
The field contains two flags, a "valid" bit, and a "last segment" bit
that indicates whether the segment is the last segment that will be
sent to firmware.
If the flag field's valid bit is NOT set, then as was done before,
assume that this is the last segment being downloaded.
However, if the flag field's valid bit IS set, then use the last segment
flag to determine if this segment is the last segment to download.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add ice_ddp_send_hunk() that buffers "sent FW hunk" calls to AQ in order
to mark the "last" one in more elegant way. Next commit will add even
more complicated "sent FW" flow, so it's better to untangle a bit before.
Note that metadata buffers were not skipped for NOT-@indicate_last
segments, this is fixed now.
Minor:
+ use ice_is_buffer_metadata() instead of open coding it in
ice_dwnld_cfg_bufs();
+ ice_dwnld_cfg_bufs_no_lock() + dependencies were moved up a bit to have
better git-diff, as this function was rewritten (in terms of git-blame)
CC: Paul Greenwalt <paul.greenwalt@intel.com>
CC: Dan Nowlin <dan.nowlin@intel.com>
CC: Ahmed Zaki <ahmed.zaki@intel.com>
CC: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Extend the work done in commit 70838938e89c ("ice: Implement driver
functionality to dump serdes equalizer values") by adding the new set of
Rx registers that can be read using command:
$ ethtool -d interface_name
Rx equalization parameters are E810 PHY registers used by end user to
gather information about configuration and status to debug link and
connection issues in the field.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Refactor function ice_get_tx_rx_equa() to iterate over new table of
params instead of multiple calls to ice_aq_get_phy_equalization().
Subsequent commit will extend that function by add more serdes equalizer
values to dump.
Shorten the fields of struct ice_serdes_equalization_to_ethtool for
readability purposes.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix Flow Director not allowing to re-map traffic to 0th queue when action
is configured to drop (and vice versa).
The current implementation of ethtool callback in the ice driver forbids
change Flow Director action from 0 to -1 and from -1 to 0 with an error,
e.g:
# ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action 0
# ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action -1
rmgr: Cannot insert RX class rule: Invalid argument
We set the value of `u16 q_index = 0` at the beginning of the function
ice_set_fdir_input_set(). In case of "drop traffic" action (which is
equal to -1 in ethtool) we store the 0 value. Later, when want to change
traffic rule to redirect to queue with index 0 it returns an error
caused by duplicate found.
Fix this behaviour by change of the type of field `q_index` from u16 to s16
in `struct ice_fdir_fltr`. This allows to store -1 in the field in case
of "drop traffic" action. What is more, change the variable type in the
function ice_set_fdir_input_set() and assign at the beginning the new
`#define ICE_FDIR_NO_QUEUE_IDX` which is -1. Later, if the action is set
to another value (point specific queue index) the variable value is
overwritten in the function.
Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unloading the ice driver while switchdev port representors are added to
a bridge can lead to kernel panic. Reproducer:
modprobe ice
devlink dev eswitch set $PF1_PCI mode switchdev
ip link add $BR type bridge
ip link set $BR up
echo 2 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 2
ip link set $PF1 master $BR
ip link set $VF1_PR master $BR
ip link set $VF2_PR master $BR
ip link set $PF1 up
ip link set $VF1_PR up
ip link set $VF2_PR up
ip link set $VF1 up
rmmod irdma ice
When unloading the driver, ice_eswitch_detach() is eventually called as
part of VF freeing. First, it removes a port representor from xarray,
then unregister_netdev() is called (via repr->ops.rem()), finally
representor is deallocated. The problem comes from the bridge doing its
own deinit at the same time. unregister_netdev() triggers a notifier
chain, resulting in ice_eswitch_br_port_deinit() being called. It should
set repr->br_port = NULL, but this does not happen since repr has
already been removed from xarray and is not found. Regardless, it
finishes up deallocating br_port. At this point, repr is still not freed
and an fdb event can happen, in which ice_eswitch_br_fdb_event_work()
takes repr->br_port and tries to use it, which causes a panic (use after
free).
Note that this only happens with 2 or more port representors added to
the bridge, since with only one representor port, the bridge deinit is
slightly different (ice_eswitch_br_port_deinit() is called via
ice_eswitch_br_ports_flush(), not ice_eswitch_br_port_unlink()).
Trace:
Oops: general protection fault, probably for non-canonical address 0xf129010fd1a93284: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x8948287e8d499420-0x8948287e8d499427]
(...)
Workqueue: ice_bridge_wq ice_eswitch_br_fdb_event_work [ice]
RIP: 0010:__rht_bucket_nested+0xb4/0x180
(...)
Call Trace:
(...)
ice_eswitch_br_fdb_find+0x3fa/0x550 [ice]
? __pfx_ice_eswitch_br_fdb_find+0x10/0x10 [ice]
ice_eswitch_br_fdb_event_work+0x2de/0x1e60 [ice]
? __schedule+0xf60/0x5210
? mutex_lock+0x91/0xe0
? __pfx_ice_eswitch_br_fdb_event_work+0x10/0x10 [ice]
? ice_eswitch_br_update_work+0x1f4/0x310 [ice]
(...)
A workaround is available: brctl setageing $BR 0, which stops the bridge
from adding fdb entries altogether.
Change the order of operations in ice_eswitch_detach(): move the call to
unregister_netdev() before removing repr from xarray. This way
repr->br_port will be correctly set to NULL in
ice_eswitch_br_port_deinit(), preventing a panic.
Fixes: fff292b47ac1 ("ice: add VF representors one by one")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
net_dim() is currently passed a struct dim_sample argument by value.
struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64
passes it on the stack. All callers have already initialized dim_sample
on the stack, so passing it by value requires pushing a duplicated copy
to the stack. Either witing to the stack and immediately reading it, or
perhaps dereferencing addresses relative to the stack pointer in a chain
of push instructions, seems to perform quite poorly.
In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time,
94% of which is attributed to the first push instruction to copy
dim_sample on the stack for the call to net_dim():
// Call ktime_get()
0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47>
// Pass the address of struct dim in %rdi
|4ead7: lea 0x3d0(%rbx),%rdi
// Set dim_sample.pkt_ctr
|4eade: mov %r13d,0x8(%rsp)
// Set dim_sample.byte_ctr
|4eae3: mov %r12d,0xc(%rsp)
// Set dim_sample.event_ctr
0.15 |4eae8: mov %bp,0x10(%rsp)
// Duplicate dim_sample on the stack
94.16 |4eaed: push 0x10(%rsp)
2.79 |4eaf1: push 0x10(%rsp)
0.07 |4eaf5: push %rax
// Call net_dim()
0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b>
To allow the caller to reuse the struct dim_sample already on the stack,
pass the struct dim_sample by reference to net_dim().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc6).
Conflicts:
drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd")
188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links")
https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/
net/mac80211/cfg.c
c4382d5ca1af ("wifi: mac80211: update the right link for tx power")
8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx")
drivers/net/ethernet/intel/ice/ice_ptp_hw.h
6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM")
e4291b64e118 ("ice: Align E810T GPIO to other products")
ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions")
ac532f4f4251 ("ice: Cleanup unused declarations")
https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The E810 Lan On Motherboard (LOM) design is vendor specific. Intel
provides the reference design, but it is up to vendor on the final
product design. For some cases, like Linux DPLL support, the static
values defined in the driver does not reflect the actual LOM design.
Current implementation of dpll pins is causing the crash on probe
of the ice driver for such DPLL enabled E810 LOM designs:
WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330
...
Call Trace:
<TASK>
? __warn+0x83/0x130
? dpll_pin_get+0x2c4/0x330
? report_bug+0x1b7/0x1d0
? handle_bug+0x42/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? dpll_pin_get+0x117/0x330
? dpll_pin_get+0x2c4/0x330
? dpll_pin_get+0x117/0x330
ice_dpll_get_pins.isra.0+0x52/0xe0 [ice]
...
The number of dpll pins enabled by LOM vendor is greater than expected
and defined in the driver for Intel designed NICs, which causes the crash.
Prevent the crash and allow generic pin initialization within Linux DPLL
subsystem for DPLL enabled E810 LOM designs.
Newly designed solution for described issue will be based on "per HW
design" pin initialization. It requires pin information dynamically
acquired from the firmware and is already in progress, planned for
next-tree only.
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Reviewed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no support for SF in legacy mode. Reflect it in the code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Fixes: eda69d654c7e ("ice: add basic devlink subfunctions support")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc3).
No conflicts and no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paolo Abeni says:
====================
net: introduce TX H/W shaping API
We have a plurality of shaping-related drivers API, but none flexible
enough to meet existing demand from vendors[1].
This series introduces new device APIs to configure in a flexible way
TX H/W shaping. The new functionalities are exposed via a newly
defined generic netlink interface and include introspection
capabilities. Some self-tests are included, on top of a dummy
netdevsim implementation. Finally a basic implementation for the iavf
driver is provided.
Some usage examples:
* Configure shaping on a given queue:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/shaper.yaml \
--do set --json '{"ifindex": '$IFINDEX',
"shaper": {"handle":
{"scope": "queue", "id":'$QUEUEID'},
"bw-max": 2000000}}'
* Container B/W sharing
The orchestration infrastructure wants to group the
container-related queues under a RR scheduling and limit the aggregate
bandwidth:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/shaper.yaml \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID2'},
"weight": '$W2'}],
{"handle": {"scope": "queue", "id":'$QID3'},
"weight": '$W3'}],
"handle": {"scope":"node"},
"bw-max": 10000000}'
{'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 0}}
Q1 \
\
Q2 -- node 0 ------- netdev
/ (bw-max: 10M)
Q3 /
* Delegation
A containers wants to limit the aggregate B/W bandwidth of 2 of the 3
queues it owns - the starting configuration is the one from the
previous point:
SPEC=Documentation/netlink/specs/net_shaper.yaml
./tools/net/ynl/cli.py --spec $SPEC \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID2'},
"weight": '$W2'}],
"handle": {"scope": "node"},
"bw-max": 5000000 }'
{'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 1}}
Q1 -- node 1 --------\
/ (bw-max: 5M) \
Q2 / node 0 ------- netdev
/(bw-max: 10M)
Q3 ------------------/
In a group operation, when prior to the op itself, the leaves have
different parents, the user must specify the parent handle for the
group. I.e., starting from the previous config:
./tools/net/ynl/cli.py --spec $SPEC \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID3'},
"weight": '$W3'}],
"handle": {"scope": "node"},
"bw-max": 3000000 }'
Netlink error: Invalid argument
nl_len = 96 (80) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'All the leaves shapers must have the same old parent'}
./tools/net/ynl/cli.py --spec $SPEC \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID3'},
"weight": '$W3'}],
"handle": {"scope": "node"},
"parent": {"scope": "node", "id": 1},
"bw-max": 3000000 }
{'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 2}}
Q1 -- node 2 ---
/(bw-max:3M)\
Q3 / \
---- node 1 \
/ (bw-max: 5M)\
Q2 node 0 ------- netdev
(bw-max: 10M)
* Cleanup:
Still starting from config 1To delete a single queue shaper
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "queue", "id":'$QID3'}}'
Q1 -- node 2 ---
(bw-max:3M)\
\
---- node 1 \
/ (bw-max: 5M)\
Q2 node 0 ------- netdev
(bw-max: 10M)
Deleting a node shaper relinks all its leaves to the node's parent:
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "node", "id":2}}'
Q1 ---\
\
node 1----- \
/ (bw-max: 5M)\
Q2----/ node 0 ------- netdev
(bw-max: 10M)
Deleting the last shaper under a node shaper deletes the node, too:
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "queue", "id":'$QID1'}}'
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "queue", "id":'$QID2'}}'
./tools/net/ynl/cli.py --spec $SPEC --do get --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "node", "id": 1}}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2
extack: {'bad-attr': '.handle'}
Such delete recurses on parents that are left over with no leaves:
./tools/net/ynl/cli.py --spec $SPEC --do get --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "node", "id": 0}}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2
extack: {'bad-attr': '.handle'}
v8: https://lore.kernel.org/cover.1727704215.git.pabeni@redhat.com
v7: https://lore.kernel.org/cover.1725919039.git.pabeni@redhat.com
v6: https://lore.kernel.org/cover.1725457317.git.pabeni@redhat.com
v5: https://lore.kernel.org/cover.1724944116.git.pabeni@redhat.com
v4: https://lore.kernel.org/cover.1724165948.git.pabeni@redhat.com
v3: https://lore.kernel.org/cover.1722357745.git.pabeni@redhat.com
RFC v2: https://lore.kernel.org/cover.1721851988.git.pabeni@redhat.com
RFC v1: https://lore.kernel.org/cover.1719518113.git.pabeni@redhat.com
====================
Link: https://patch.msgid.link/cover.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to configure VF queue rate limit and quanta size.
For quanta size configuration, the quanta profiles are divided evenly
by PF numbers. For each port, the first quanta profile is reserved for
default. When VF is asked to set queue quanta size, PF will search for
an available profile, change the fields and assigned this profile to the
queue.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/fddefc2c1ec3ab32b241ce444af401da19e834dd.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit fff292b47ac1 ("ice: add VF representors one by one")
ice_eswitch_configure() is not used anymore.
Commit 1b8f15b64a00 ("ice: refactor filter functions") removed
ice_vsi_cfg_mac_fltr() but leave declaration.
Commit a24b4c6e9aab ("ice: xsk: Do not convert to buff to frame for
XDP_TX") leave ice_xmit_xdp_buff() declaration.
Commit 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C
products") declared ice_phy_cfg_{rx,tx}_offset_eth56g(),
commit a1ffafb0b4a4 ("ice: Support configuring the device to Double
VLAN Mode") declared ice_pkg_buf_get_free_space(), and
commit 8a3a565ff210 ("ice: add admin commands to access cgu
configuration") declared ice_is_pca9575_present(), but all these never
be implemented.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add jump targets so that a bit of exception handling can be better reused
at the end of two function implementations.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We have for some time the assign_bit() API to replace open coded
if (foo)
set_bit(n, bar);
else
clear_bit(n, bar);
Use this API to clean the code. No functional change intended.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The max_frame and rx_buf_len fields of the VSI set the maximum frame size
for packets on the wire, and configure the size of the Rx buffer. In the
hardware, these are per-queue configuration. Most VSI types use a simple
method to determine the size of the buffers for all queues.
However, VFs may potentially configure different values for each queue.
While the Linux iAVF driver does not do this, it is allowed by the virtchnl
interface.
The current virtchnl code simply sets the per-VSI fields inbetween calls to
ice_vsi_cfg_single_rxq(). This technically works, as these fields are only
ever used when programming the Rx ring, and otherwise not checked again.
However, it is confusing to maintain.
The Rx ring also already has an rx_buf_len field in order to access the
buffer length in the hotpath. It also has extra unused bytes in the ring
structure which we can make use of to store the maximum frame size.
Drop the VSI max_frame and rx_buf_len fields. Add max_frame to the Rx ring,
and slightly re-order rx_buf_len to better fit into the gaps in the
structure layout.
Change the ice_vsi_cfg_frame_size function so that it writes to the ring
fields. Call this function once per ring in ice_vsi_cfg_rxqs(). This is
done over calling it inside the ice_vsi_cfg_rxq(), because
ice_vsi_cfg_rxq() is called in the virtchnl flow where the max_frame and
rx_buf_len have already been configured.
Change the accesses for rx_buf_len and max_frame to all point to the ring
structure. This has the added benefit that ice_vsi_cfg_rxq() no longer has
the surprise side effect of updating ring->rx_buf_len based on the VSI
field.
Update the virtchnl ice_vc_cfg_qs_msg() function to set the ring values
directly, and drop references to the removed VSI fields.
This now makes the VF logic clear, as the ring fields are obviously
per-queue. This reduces the required cognitive load when reasoning about
this logic.
Note that removing the VSI fields does leave a 4 byte gap, but the ice_vsi
structure has many gaps, and its layout is not as critical in the hot path.
The structure may benefit from a more thorough repacking, but no attempt
was made in this change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_vc_cfg_qs_msg() function is used to configure VF queues in response
to a VIRTCHNL_OP_CONFIG_VSI_QUEUES command.
The virtchnl command contains an array of queue pair data for configuring
Tx and Rx queues. This data includes a queue ID. When configuring the
queues, the driver generally uses this queue ID to determine which Tx and
Rx ring to program. However, a handful of places use the index into the
queue pair data from the VF. While most VF implementations appear to send
this data in order, it is not mandated by the virtchnl and it is not
verified that the queue pair data comes in order.
Fix the driver to consistently use the q_idx field instead of the 'i'
iterator value when accessing the rings. For the Rx case, introduce a local
ring variable to keep lines short.
Fixes: 7ad15440acf8 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
E830 adds hardware support to prevent the VF from overflowing the PF
mailbox with VIRTCHNL messages. E830 will use the hardware feature
(ICE_F_MBX_LIMIT) instead of the software solution ice_is_malicious_vf().
To prevent a VF from overflowing the PF, the PF sets the number of
messages per VF that can be in the PF's mailbox queue
(ICE_MBX_OVERFLOW_WATERMARK). When the PF processes a message from a VF,
the PF decrements the per VF message count using the E830_MBX_VF_DEC_TRIG
register.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable ethtool reset support. Ethtool reset flags are mapped to the
E810 reset type:
PF reset:
$ ethtool --reset <ethX> irq dma filter offload
CORE reset:
$ ethtool --reset <ethX> irq-shared dma-shared filter-shared \
offload-shared ram-shared
GLOBAL reset:
$ ethtool --reset <ethX> irq-shared dma-shared filter-shared \
offload-shared mac-shared phy-shared ram-shared
Calling the same set of flags as in PF reset case on port representor
triggers VF reset.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Increasing MSI-X value on a VF leads to invalid memory operations. This
is caused by not reallocating some arrays.
Reproducer:
modprobe ice
echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe
echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs
echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count
Default MSI-X is 16, so 17 and above triggers this issue.
KASAN reports:
BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
Read of size 8 at addr ffff8888b937d180 by task bash/28433
(...)
Call Trace:
(...)
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
kasan_report+0xed/0x120
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_cfg_def+0x3360/0x4770 [ice]
? mutex_unlock+0x83/0xd0
? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice]
? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vf_reconfig_vsi+0x114/0x210 [ice]
ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice]
sriov_vf_msix_count_store+0x21c/0x300
(...)
Allocated by task 28201:
(...)
ice_vsi_cfg_def+0x1c8e/0x4770 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vsi_setup+0x179/0xa30 [ice]
ice_sriov_configure+0xcaa/0x1520 [ice]
sriov_numvfs_store+0x212/0x390
(...)
To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This
causes the required arrays to be reallocated taking the new queue count
into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq
before ice_vsi_rebuild(), so that realloc uses the newly set queue
count.
Additionally, ice_vsi_rebuild() does not remove VSI filters
(ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer
necessary.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 2a2cb4c6c181 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Triggering the reset while in switchdev mode causes
errors[1]. Rules are already removed by this time
because switch content is flushed in case of the reset.
This means that rules were deleted from HW but SW
still thinks they exist so when we get
SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to
delete not existing rule.
We can avoid these errors by clearing the rules
early in the reset flow before they are removed from HW.
Switchdev API will get notified that the rule was removed
so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification.
Remove unnecessary ice_clear_sw_switch_recipes.
[1]
ice 0000:01:00.0: Failed to delete FDB forward rule, err: -2
ice 0000:01:00.0: Failed to delete FDB guard rule, err: -2
Fixes: 7c945a1a8e5f ("ice: Switchdev FDB events support")
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
netif_is_ice() works by checking the pointer to netdev ops. However, it
only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops,
so in Safe Mode it always returns false, which is unintuitive. While it
doesn't look like netif_is_ice() is currently being called anywhere in Safe
Mode, this could change and potentially lead to unexpected behaviour.
Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If DDP package is missing or corrupted, the driver should enter Safe Mode.
Instead, an error is returned and probe fails.
To fix this, don't exit init if ice_init_ddp_config() returns an error.
Repro:
* Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg)
* Load ice
Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-10-01 (ice)
This series contains updates to ice driver only.
Karol cleans up current PTP GPIO pin handling, fixes minor bugs,
refactors implementation for all products, introduces SDP (Software
Definable Pins) for E825C and implements reading SDP section from NVM
for E810 products.
Sergey replaces multiple aux buses and devices used in the PTP support
code with struct ice_adapter holding the necessary shared data.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Drop auxbus use for PTP to finalize ice_adapter move
ice: Use ice_adapter for PTP shared data instead of auxdev
ice: Initial support for E825C hardware in ice_adapter
ice: Add ice_get_ctrl_ptp() wrapper to simplify the code
ice: Introduce ice_get_phy_model() wrapper
ice: Enable 1PPS out from CGU for E825C products
ice: Read SDP section from NVM for pin definitions
ice: Disable shared pin on E810 on setfunc
ice: Cache perout/extts requests and check flags
ice: Align E810T GPIO to other products
ice: Add SDPs support for E825C
ice: Implement ice_ptp_pin_desc
====================
Link: https://patch.msgid.link/20241001201702.3252954-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-09-30 (ice, idpf)
This series contains updates to ice and idpf drivers:
For ice:
Michal corrects setting of dst VSI on LAN filters and adds clearing of
port VLAN configuration during reset.
Gui-Dong Han corrects failures to decrement refcount in some error
paths.
Przemek resolves a memory leak in ice_init_tx_topology().
Arkadiusz prevents setting of DPLL_PIN_STATE_SELECTABLE to an improper
value.
Dave stops clearing of VLAN tracking bit to allow for VLANs to be properly
restored after reset.
For idpf:
Ahmed sets uninitialized dyn_ctl_intrvl_s value.
Josh corrects use and reporting of mailbox size.
Larysa corrects order of function calls during de-initialization.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: deinit virtchnl transaction manager after vport and vectors
idpf: use actual mbx receive payload length
idpf: fix VF dynamic interrupt ctl register initialization
ice: fix VLAN replay after reset
ice: disallow DPLL_PIN_STATE_SELECTABLE for dpll output pins
ice: fix memleak in ice_init_tx_topology()
ice: clear port vlan config during reset
ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count()
ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins()
ice: set correct dst VSI in only LAN filters
====================
Link: https://patch.msgid.link/20240930223601.3137464-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Drop unused auxbus/auxdev support from the PTP code due to
move to the ice_adapter.
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use struct ice_adapter to hold shared PTP data and control PTP
related actions instead of auxbus. This allows significant code
simplification and faster access to the container fields used in
the PTP support code.
Move the PTP port list to the ice_adapter container to simplify
the code and avoid race conditions which could occur due to the
synchronous nature of the initialization/access and
certain memory saving can be achieved by moving PTP data into
the ice_adapter itself.
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Address E825C devices by PCI ID since dual IP core configurations
need 1 ice_adapter for both devices.
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add ice_get_ctrl_ptp() wrapper to simplify the PTP support code
in the functions that do not use ctrl_pf directly.
Add the control PF pointer to struct ice_adapter
Rearrange fields in struct ice_adapter
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce ice_get_phy_model() to improve code readability
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement configuring 1PPS signal output from CGU. Use maximal amplitude
because Linux PTP pin API does not have any way for user to set signal
level.
This change is necessary for E825C products to properly output any
signal from 1PPS pin.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
PTP pins assignment and their related SDPs (Software Definable Pins) are
currently hardcoded.
Fix that by reading NVM section instead on products supporting this,
which are E810 products.
If SDP section is not defined in NVM, the driver continues to use the
hardcoded table.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When setting a new supported function for a pin on E810, disable other
enabled pin that shares the same GPIO.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
