| Age | Commit message (Collapse) | Author |
|---|
|
The sparx5 switchdev driver can be built either with or without support
for the Lan969x switch. However, it cannot be built-in when the lan969x
driver is a loadable module because of a link-time dependency:
arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/sparx5/sparx5_main.o:(.rodata+0xd44): undefined reference to `lan969x_desc'
Add a Kconfig dependency to reflect this in Kconfig, allowing all
the valid configurations but forcing sparx5 to be a loadable module
as well if lan969x is.
Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241113115513.4132548-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add configuration data (for consumption by the VCAP API) for the four
VCAP's that we are going to support. The following VCAP's will be
supported:
- VCAP CLM: (also known as IS0) is part of the analyzer and enables
frame classification using VCAP functionality.
- VCAP IS2: is part of ANA_ACL and enables access control lists, using
VCAP functionality.
- VCAP ES0: is part of the rewriter and enables rewriting of frames
using VCAP functionality.
- VCAP ES2: is part of EACL and enables egress access control lists
using VCAP functionality
The two VCAP's: CLM and IS2 use shared resources from the SUPER VCAP.
The SUPER VCAP is a shared pool of 6 blocks that can be distributed
freely among CLM and IS2. Each block in the pool has 3,072 addresses
with entries, actions, and counters. ES0 and ES2 does not use shared
resources.
In the configuration data for lan969x CLM uses blocks 2-4 with a total
of 6 lookups. IS2 uses blocks 0-1 with a total of 4 lookups.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Platform VCAP data for each VCAP instance is auto-generated using an
internal Microchip tool. The generated VCAP data contains information
about keyfields, keyfield sets, actionfields, actionfield sets and
typegroups, which in combination are used to encode and decode rules in
the VCAP.
Add the auto-generated VCAP file lan969x_vcap_ag_api.c and assign the
two structs: lan969x_vcaps and lan969x_vcap_stats to the match data.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lan969x has support for RedBox / HSR / PRP (not implemented yet). In
order to accommodate for this in the future, we need to give lan969x it's
own function for calculating the DSM calendar.
The function calculates the calendar for each taxi bus. The calendar is
used for bandwidth allocation towards the ports attached to the taxi
bus. A calendar configuration consists of up-to 64 slots, which may be
allocated to ports or left unused. Each slot accounts for 1 clock cycle.
Also expose sparx5_cal_speed_to_value(), sparx5_get_port_cal_speed,
sparx5_cal_bw and SPX5_DSM_CAL_EMPTY for use by lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-11-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PTP IRQ handler for lan969x. This is required, as the PTP registers
are placed in two different targets on Sparx5 and lan969x. The
implementation is otherwise the same as on Sparx5.
Also, expose sparx5_get_hwtimestamp() for use by lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a bunch of small lan969x ops in bulk. These ops are explained in
detail in a previous series [1].
[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-8-d3290f581663@microchip.com/
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-9-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the lan969x constants to match data. These are already used
throughout the Sparx5 code (introduced in earlier series [1]), so no
need to update any code use.
[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com/
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-8-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new file lan969x_regs.c that defines all the register differences
for lan969x, and add it to the lan969x match data.
GW_DEV2G5_PHASE_DETECTOR_CTRL, FP_DEV2G5_PHAD_CTRL_PHAD_ENA and
FP_DEV2G5_PHAD_CTRL_PHAD_FAILED are required by the new register macros
which was introduced earlier. Add these for Sparx5 also.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-7-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add match data for lan969x, with initial fields for iomap, iomap_size
and ioranges. Add new Kconfig symbol CONFIG_LAN969X_CONFIG for compiling
the lan969x driver.
It has been decided to give lan969x its own Kconfig symbol, as a
considerable amount of code is needed, beside the Sparx5 code, to add
full chip support (and more will be added in future series). Also this
makes it possible to compile Sparx5 without lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-6-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
