| Age | Commit message (Collapse) | Author |
|---|
|
The nvme_execute_identify_ns_nvm function uses ZERO_PAGE for copying
SG list with all zeros. As ZERO_PAGE would not necessarily return the
virtual-address of the zero page, we need to first convert the page
address to kernel virtual-address and then use it as source address
for copying the data to SG list with all zeros. Using return address
of ZERO_PAGE(0) as source address for copying data to SG list would
fill the target buffer with random/garbage value and causes the
undesired side effect.
As other identify implemenations uses kzalloc for allocating a zero
filled buffer, we decided use kzalloc for allocating a zero filled
buffer in nvme_execute_identify_ns_nvm function and then use this
buffer for copying all zeros to SG list buffers. So esentially, we
now avoid using ZERO_PAGE.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 64a51080eaba ("nvmet: implement id ns for nvm command set")
Link: https://lore.kernel.org/all/CAHj4cs8OVyxmn4XTvA=y4uQ3qWpdw-x3M3FSUYr-KpE-nhaFEA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This provides a little more context when reading the code than hardcoded
magic numbers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Currently, we report that controller has vwc even though the ns may
not have vwc. Report ns's vwc not present when not buffered_io or
backdev doesn't have vwc.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Implements reporting the I/O Command Set Independent Identify Namespace
command.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Most of the information is stubbed. Supporting these commands is a
requirement for supporting rotational media.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Most of the returned information is just stubbed data. The target must
support these in order to report rotational media. Since this driver
doesn't know any better, each namespace is its own endurance group with
the engid value matching the nsid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This log is required for nvme 2.1.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This log is required for nvme 2.1.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This is required for nvme 2.1 for targets that support multiple command
sets. We support NVM and ZNS, so are required to support this
identification.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We don't report anything here, but it's a mandatory identification for
nvme 2.1.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch implements the reservation feature, including:
1. reservation register(register, unregister and replace).
2. reservation acquire(acquire, preempt, preempt and abort).
3. reservation release(release and clear).
4. reservation report.
5. set feature and get feature of reservation notify mask.
6. get log page of reservation event.
Not supported:
1. persistent reservation through power loss.
Test cases:
Use nvme-cli and fio to test all implemented sub features:
1. use nvme resv-register to register host a registrant or
unregister or replace a new key.
2. use nvme resv-acquire to set host to the holder, and use fio
to send read and write io in all reservation type. And also
test preempt and "preempt and abort".
3. use nvme resv-report to show all registrants and reservation
status.
4. use nvme resv-release to release all registrants.
5. use nvme get-log to get events generated by the preceding
operations.
In addition, make reservation configurable, one can set ns to
support reservation before enable ns. The default of resv_enable
is false.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
|
|
nsid values of 0xFFFFFFFE and 0XFFFFFFFF should be rejected with
a status code of "Invalid Namespace or Format".
See NVMe Base Specification, Active Namespace ID list (CNS 02h).
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvmet_check_ctrl_status() checks the authentication status, so
we don't need to do that prior to calling it.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
CDR/MORE/DNR fields are not belonging to SC in the NVMe spec, rename
them to NVME_STATUS_* to avoid confusion.
Signed-off-by: Weiwen Hu <huweiwen@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This is a preparation for having a dynamic configuration of max queue
size for a controller. Make sure that the maxcmd field stays the same as
the MQES (+1) value as we do today.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Just fold it into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
nvmet_execute_identify_ns_zns is a more descriptive name for the
function handling the "I/O Command Set Specific Identify Namespace
Data Structure for the Zoned Namespace Command Set".
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The Identification Descriptor List CNS value does not check the CSI
value, so remove the code trying to handle it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Change the order of the cases in nvmet_execute_identify() main
switch-case to match the NVMe 2.0 specification order as defined in
table 273. This is also the increasing order of CNS values.
While at it, for clarity, make it explicit that identify with cns set
to NVME_ID_CNS_CS_NS does not support NVM command set specific data.
No functional changes are introduced by this cleanup.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:
If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.
However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.
Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
nvmet_execute_identify_ctrl_zns() to continue handling the
ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
NVM command set, returning a zero filled nvme_id_ctrl_nvm data
structure.
3) Modify nvmet_execute_identify() to call these helpers based on
the csi specified, returning an error for unsupported command sets.
Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.
The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().
Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This is due to the fact that the host is allowed to pass the controller
an sgl describing a buffer that is larger than the payload itself
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
It is already there, just go ahead and use it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Allow user to set currently active firmware revision
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Allow user to set OUI for the controller vendor.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds three additional configfs entries 'dhchap_key',
'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
format as specified in NVMe Base Specification v2.0 section 8.13.5.8
'Secret representation'.
'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
switch to a different HMAC algorithm.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some fabrics commands can be sent via io queues, so add a new
function nvmet_parse_fabrics_io_cmd() and rename the existing
nvmet_parse_fabrics_cmd() to nvmet_parse_fabrics_admin_cmd().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Any attempt to flush kernel-global WQs has possibility of deadlock
so we should simply stop using them, instead introduce nvmet_wq
which is the generic nvmet workqueue for work elements that
don't explicitly require a dedicated workqueue (by the mere fact
that they are using the system_wq).
Changes were done using the following replaces:
- s/schedule_work(/queue_work(nvmet_wq, /g
- s/schedule_delayed_work(/queue_delayed_work(nvmet_wq, /g
- s/flush_scheduled_work()/flush_workqueue(nvmet_wq)/g
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvmet_ns_changed states via lockdep that the ns->subsys->lock must be
held. The only caller of nvmet_ns_changed which does not acquire that
lock is nvmet_ns_revalidate. nvmet_ns_revalidate has 3 callers,
of which 2 do not acquire that lock: nvmet_execute_identify_cns_cs_ns
and nvmet_execute_identify_ns. The other caller
nvmet_ns_revalidate_size_store does acquire the lock.
Move the call to nvmet_ns_changed from nvmet_ns_revalidate to the callers
so that they can perform the correct locking as needed.
This issue was found using a static type-based analyser and manually
verified.
Reported-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
In an effort to avoid open-coded arithmetic in the kernel [1], use the
flex_array_size() and struct_size() helpers instead of an open-coded
calculation.
[1] https://github.com/KSPP/linux/issues/160
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
In this case this is not actually dynamic size: all the operands
involved in the calculation are constant values. However it is better to
refactor this anyway, just to keep the open-coded math idiom out of
code.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kmalloc() function.
This code was detected with the help of Coccinelle and audited and fixed
manually.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This makes the code more readable.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This makes the code more readable.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Set the correct 'CNTRLTYPE' field in the identify controller data.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a helper function to determine if a given subsystem is a discovery
subsystem.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The target core code never needs the host-side nvme_ctrl structure.
Open code two uses of nvmet_is_passthru_req in passthru.c, and then
switch the helpers used by the core to return bool. Also rename the
fuctions to better match their usage:
nvmet_passthru_ctrl -> nvmet_is_passthru_subsys
nvmet_req_passthru_ctrl -> nvmet_is_passthru_req
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
For Spec regarding MNAN value:-
If the controller supports Asymmetric Namespace Access Reporting, then
this field shall be set to a non-zero value that is less than or equal
to the NN value.
Instead of using subsys->max_nsid that gets calculated dynamically,
use NVMET_MAX_NAMESPACES value to report NN. This way we will maintain
the MNAN value spec compliant with NN.
Without this patch, code results in the following error :-
[337976.409142] nvme nvme1: Invalid MNAN value 1024
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe TP 4053 – Zoned Namespaces (ZNS) allows host software to
communicate with a non-volatile memory subsystem using zones for NVMe
protocol-based controllers. NVMeOF already support the ZNS NVMe
Protocol compliant devices on the target in the passthru mode. There
are generic zoned block devices like Shingled Magnetic Recording (SMR)
HDDs that are not based on the NVMe protocol.
This patch adds ZNS backend support for non-ZNS zoned block devices as
NVMeOF targets.
This support includes implementing the new command set NVME_CSI_ZNS,
adding different command handlers for ZNS command set such as NVMe
Identify Controller, NVMe Identify Namespace, NVMe Zone Append,
NVMe Zone Management Send and NVMe Zone Management Receive.
With the new command set identifier, we also update the target command
effects logs to reflect the ZNS compliant commands.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe TP 4056 allows controllers to support different command sets.
NVMeoF target currently only supports namespaces that contain
traditional logical blocks that may be randomly read and written. In
some applications there is a value in exposing namespaces that contain
logical blocks that have special access rules (e.g. sequentially write
required namespace such as Zoned Namespace (ZNS)).
In order to support the Zoned Block Devices (ZBD) backend, controllers
need to have support for ZNS Command Set Identifier (CSI).
In this preparation patch, we adjust the code such that it can now
support the default command set identifier. We update the namespace data
structure to store the CSI value which defaults to NVME_CSI_NVM
that represents traditional logical blocks namespace type.
The CSI support is required to implement the ZBD backend for NVMeOF
with host side NVMe ZNS interface, since ZNS commands belong to
the different command set than the default one.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We report error and complete the request when identify cns value is not
handled in nvmet_execute_identify(). This error reporting is also needed
for Zone Block Device backend for NVMeOF target.
Add a helper nvmet_req_cns_error_compplete() to report an error and
complete the request when idenitfy command cns not handled value.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently, once the subsystem's model_number is set for the first time
there is no way to change it. However, as long as no connection was
established to nvmf target, there is no reason for such restriction and
we should allow to change the subsystem's model_number as many times as
needed.
In addition, in order to simplfy the changes and make the model number
flow more similar to the rest of the attributes in the Identify
Controller data structure, we set a default value for the model number
at the initiation of the subsystem.
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Once some host has connected to the target, make sure that the serial
number is stable and cannot be changed.
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
According to the NVM specification, the serial_number should be 20 bytes
(bytes 23:04 of the Identify Controller data structure), and should
contain only ASCII characters.
In accordance, the serial_number size is changed to 20 bytes and before
any attempt to store a new value in serial_number we check that the
input is valid - i.e. contains only ASCII characters, is not empty and
does not exceed 20 bytes.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
