summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
AgeCommit message (Collapse)Author
2024-10-28pinctrl: aspeed-g6: Support drive-strength for GPIOF/GBilly Tsai
Add drive strength configuration support for GPIO F and G groups. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/20241023104406.4083460-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-26pinctrl: aspeed-g6: Add NCSI pin group configPotin Lai
Based on the NCSI pin table (Table 181) in NCSI spec[1], the reference clock output pin (RMIIXRCLKO) is not needed on the management controller side. To optimize pin usage, add new NCSI pin group that excludes RMIIXRCLKO, reducing the number of required pins. LINK: [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.2.0a.pdf Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/20240621093142.698529-3-potin.lai.pt@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-03-28pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-TBilly Tsai
The register offset to disable the internal pull-down of GPIOR~T is 0x630 instead of 0x620, as specified in the Ast2600 datasheet v15 The datasheet can download from the official Aspeed website. Fixes: 15711ba6ff19 ("pinctrl: aspeed-g6: Add AST2600 pinconf support") Reported-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Message-ID: <20240313092809.2596644-1-billy_tsai@aspeedtech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25pinctrl: pinctrl-aspeed-g6: Add more settings for USB2AHP functionJoe Wang
AST2600 USB2AHP (USB PortA: PCIe EHCI to PHY) function needs to set the register SCUC20[16]. Set it to enable the PCIe EHCI device on PCIe bus. Besides, also add USB2AHP signal expressions into pin declarations. Signed-off-by: Joe Wang <joe_wang@aspeedtech.com> Link: https://lore.kernel.org/r/20230920103332.274151-1-joe_wang@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-13pinctrl: pinctrl-aspeed-g6: add FWQSPI function-groupJohnny Huang
Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support AST2600 FW SPI quad mode. These pins can be used with dedicated FW SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14) and FWSPIMISO (AB13). Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220329173932.2588289-5-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-04-13pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrlJae Hyun Yoo
FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove FWQSPID group in pinctrl. These pins must be used with the FWSPI pins that are dedicated for boot SPI interface which provides same 3.3v logic level. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-01Merge tag 'pinctrl-v5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.14 kernel. Not so much going on. No core changes, just drivers. The most interesting would be that MIPS Ralink is migrating to pin control and we have some bindings but not yet code for the Apple M1 pin controller. New drivers: - Last merge window we created a driver for the Ralink RT2880. We are now moving the Ralink SoC pin control drivers out of the MIPS architecture code and into the pin control subsystem. This concerns RT288X, MT7620, RT305X, RT3883 and MT7621. - Qualcomm SM6125 SoC pin control driver. - Qualcomm spmi-gpio support for PM7325. - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string) - Mediatek MT8365 SoC pin controller. - New device HID for the AMD GPIO controller. Improvements: - Pin bias config support for a slew of Renesas pin controllers. - Incremental improvements and non-urgent bug fixes to the Renesas SoC drivers. - Implement irq_set_wake on the AMD pin controller so we can wake up from external pin events. Misc: - Devicetree bindings for the Apple M1 pin controller, we will probably see a proper driver for this soon as well" * tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits) pinctrl: ralink: rt305x: add missing include pinctrl: stm32: check for IRQ MUX validity during alloc() pinctrl: zynqmp: some code cleanups drivers: qcom: pinctrl: Add pinctrl driver for sm6125 dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios pinctrl: mcp23s08: Add optional reset GPIO pinctrl: mediatek: fix mode encoding pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq() pinctrl: bcm: Constify static pinmux_ops pinctrl: bcm: Constify static pinctrl_ops pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file pinctrl: ralink: move ralink architecture pinmux header into the driver pinctrl: single: config: enable the pin's input pinctrl: mtk: Fix mt8365 Kconfig dependency pinctrl: mcp23s08: fix race condition in irq handler ...
2021-05-28pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settingsSteven Lee
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces. Current pinctrl driver only define the first sgpio master and slave interfaces. The second SGPIO master and slave interfaces should be added in pinctrl driver as well. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210525055308.31069-4-steven_lee@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-19pinctrl: aspeed: Fix minor documentation errorSouptick Joarder
Kernel test robot throws below warning -> drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c:2705: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c:2614: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed.c:111: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinmux-aspeed.c:24: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fix minor documentation error. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1619353584-8196-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: aspeed: g6: Fix PWMG0 pinctrl settingBilly Tsai
The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from SCU414 to SCU4B4. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201217024912.3198-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banksAndrew Jeffery
These were skipped in the original patches adding pinconf support for the AST2600. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Johnny Huang <johnny_huang@aspeedtech.com> Link: https://lore.kernel.org/r/20200910025631.2996342-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: aspeed: Describe the heartbeat function on ball Y23Andrew Jeffery
The default pinmux configuration for Y23 is to route a heartbeat to drive a LED. Previous revisions of the AST2600 datasheet did not include a description of this function. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200701030756.2834657-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-29Merge tag 'v5.5-rc3' into develLinus Walleij
Linux 5.5-rc3
2019-12-13pinctrl: aspeed-g6: Add AST2600 pinconf supportJohnny Huang
The AST2600 pinconf is a little different from previous generations of ASPEED BMC SoCs in terms of architecture. The pull-down setting is per-pin setting now, and drive-strength support 4 kind of value (e.g. 4ma, 8ma, 12ma, 16ma). Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Trim unused pinctrl register macros] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed-g6: Add support for the AST2600 USB pinmuxJohnny Huang
AST2600 has two USB ports, A, B: Port A supports 4 distinct modes: 1. PCIe EHCI to Hub 2. Hub to PHY 3. BMC EHCI to PHY 4. PCIe EHCI to PHY Port B support 3 modes: 1. USB1.1 HID controller 2. USB2.0 Device controller 3. BMC EHCI port2 Implement pinmux support by mapping each ports' functions onto a single pin group for each port. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux configJohnny Huang
These pins only expose a single function but are not fixed-function as their I3C capability can be disabled. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message, sort pins list] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-12pinctrl: aspeed-g6: Fix LPC/eSPI mux configurationAndrew Jeffery
Early revisions of the AST2600 datasheet are conflicted about the state of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED determined that the reference pinmux configuration tables were in error and the SCU documentation contained the correct configuration. Update the driver to reflect the state described in the SCU documentation. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groupsJohnny Huang
AST2600 EMMC support 3 types DAT bus sizes (1, 4 and 8-bit), corresponding to 3 groups: EMMCG1, EMMCG4 and EMMCG8 Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-8-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Fix UART13 group pinmuxJohnny Huang
When UART13G1 is set the pinmux configuration in SCU4B8 for UART13G0 should be cleared. Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-7-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configurationJohnny Huang
The documentation to configure I3C3/FSI1 and I3C4/FSI2 was initially unclear. Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message, resolve rebase conflicts] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-5-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Fix I2C14 SDA descriptionAndrew Jeffery
The I2C function the pin participated in was incorrectly named SDA14 which lead to a failure to mux: [ 6.884344] No function I2C14 found on pin 7 (7). Found signal(s) MACLINK4, SDA14, GPIOA7 for function(s) MACLINK4, SDA14, GPIOA7 Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-4-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Sort pins for sanityAndrew Jeffery
Some pins crept in that weren't ordered in the list. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-3-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-10pinctrl: aspeed: g6: Remove const specifier from aspeed_g6_sig_expr_set's ↵Nathan Chancellor
ctx parameter clang errors: drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c:2325:9: error: incompatible pointer types initializing 'int (*)(struct aspeed_pinmux_data *, const struct aspeed_sig_expr *, bool)' with an expression of type 'int (const struct aspeed_pinmux_data *, const struct aspeed_sig_expr *, bool)' [-Werror,-Wincompatible-pointer-types] .set = aspeed_g6_sig_expr_set, ^~~~~~~~~~~~~~~~~~~~~~ 1 error generated. Commit 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps") changed the set function pointer declaration and the g6 one wasn't updated (I assume because it wasn't merged yet). Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Link: https://github.com/ClangBuiltLinux/linux/issues/632 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20190807003037.48457-1-natechancellor@gmail.com Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add AST2600 pinmux supportAndrew Jeffery
The AST2600 pinmux is fairly similar to the previous generations of ASPEED BMC SoCs in terms of architecture, though differ in some of the design details. The complexity of the pin expressions is largely reduced (e.g. there are no-longer signals with multiple expressions muxing them to the associated pin), and there are now signals and buses with multiple pin groups. The driver implements pinmux support for all 244 GPIO-capable pins plus a further four pins that are not GPIO capable but which expose multiple signals. pinconf will be implemented in a follow-up patch. The implementation has been smoke-tested under qemu, and run on hardware by ASPEED. Debugged-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190711041942.23202-7-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-28 01:07:08 +0000