| Age | Commit message (Collapse) | Author |
|---|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add SAM client device nodes for the Surface Pro 9 5G, with the usual
battery/AC and HID nodes for keyboard and touchpad support.
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240908223505.21011-4-jerome.debretagne@gmail.com
[ij: variable names 5G -> 5g, added archs to comments as requested.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
|
|
Add basic support for registering the aggregator module on Device Tree-
based platforms. These include at least three generations of Qualcomm
Snapdragon-based Surface devices:
- SC8180X / SQ1 / SQ2: Pro X,
- SC8280XP / SQ3: Devkit 2023, Pro 9
- X Elite: Laptop 7 / Pro11
Thankfully, the aggregators on these seem to be configured in an
identical way, which allows for using these settings as defaults and
no DT properties need to be introduced (until that changes, anyway).
Based on the work done by Maximilian Luz, largely rewritten.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240814-topic-sam-v3-3-a84588aad233@quicinc.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add SAM client device nodes for the Surface Laptop Studio 6 (SL6). The
SL6 is similar to the SL5, with the typical battery/AC, platform
profile, and HID nodes. It also has support for the newly supported fan
interface.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-6-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
for Surface Laptop 5
The EC on the Surface Laptop 5 exposes the fan interface. With the
recently introduced driver for it, we can now also enable it here. In
addition, also enable the thermal sensor interface.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-5-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add SAM client device nodes for the Surface Laptop Studio 2 (SLS2). The
SLS2 is quite similar to the SLS1, but it does not provide the touchpad
as a SAM-HID device. Therefore, add a new node group for the SLS2 and
update the comments accordingly. In addition, it uses the new fan
control interface.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-4-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add SAM client device nodes for the Surface Laptop Go 3. It seems to use
the same SAM client devices as the Surface Laptop Go 1 and 2, so re-use
their node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-3-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add SAM client device nodes for the Surface Pro 10. It seems to use the
same SAM client devices as the Surface Pro 9, so re-use its node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-2-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
the Surface Pro 9
The Surface Pro 9 has thermal sensors connected via the Surface
Aggregator Module. Add a device node to support those.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240330112409.3402943-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Change naming from tmp to platform profile to clarify the module may
interact with both the TMP and FAN subystems. Add functionality that
switches the fan profile when the platform profile is changed when
a fan is present.
Signed-off-by: Ivor Wanders <ivor@iwanders.net>
Link: https://github.com/linux-surface/kernel/pull/145
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240314223733.6236-2-ivor@iwanders.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add an entry for the fan speed function.
Add this new entry to the Surface Pro 9 group.
Signed-off-by: Ivor Wanders <ivor@iwanders.net>
Link: https://github.com/linux-surface/kernel/pull/144
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240131005856.10180-3-ivor@iwanders.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230917203805.1149595-5-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Surface Pro 9
Add support for the POS-subsystem tablet-mode switch used on the Surface
Pro 9.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230304194611.87770-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The target ID of the base hub is currently set to KIP (keyboard/
peripherals). However, even though it manages such devices with the KIP
target ID, the base hub itself is actually accessed via the SAM target
ID. So set it accordingly.
Note that the target ID of the hub can be chosen arbitrarily and does
not directly correspond to any physical or virtual component of the EC.
This change is only a code improvement intended for consistency and
clarity, it does not fix an actual bug.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-10-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal HID devices (including
touchpad and keyboard) on the Surface Laptop 5.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221115231440.1338142-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal and type-cover HID devices
(including sensors, touchpad, keyboard, and other miscellaneous devices)
on the Surface Pro 9.
This does not include support for a tablet-mode switch yet, as that is
now handled via the POS subsystem (unlike the Surface Pro 8, where it is
handled via the KIP subsystem) and therefore needs further changes.
While we're at it, also add the missing comment for the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
client to SP8
Add software nodes for the HID sensor collection and the UCM UCSI HID
client to the Surface Pro 8. In contrast to the type-cover devices,
these devices are directly attached to the SAM controller, without any
hub.
This enables support for HID-based sensors, including the ones used for
automatic screen rotation, on the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
findings
On Windows, the HID devices with target ID 1 are grouped as "Surface Hot
Plug - SAM". Rename their device nodes in the registry to reflect that
and update the comments accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
their function
Rename HID device nodes based on their function. In particular, these
are nodes for firmware updates via the CFU mechanism (component firmware
update), HID based sensors, and a USB-C UCSI client.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface Laptop Go 2 seems to have the same SAM client devices as the
Surface Laptop Go 1, so re-use its node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810140133.99087-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update the copyright of various Surface drivers to the current year.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624205800.1355621-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Split out subsystem device hub drivers into their own module. This
allows us to load the hub drivers separately from the registry, which
will help future DT/OF support.
While doing so, also remove a small bit of code duplication.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624205800.1355621-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
module
Move helper functions for client device registration to the core module.
This simplifies addition of future DT/OF support and also allows us to
split out the device hub drivers into their own module.
At the same time, also improve device node validation a bit by not
silently skipping devices with invalid device UID specifiers. Further,
ensure proper lifetime management for the firmware/software nodes
associated with the added devices.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624205800.1355621-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Surface Laptop Studio
Add a POS subsystem tablet-mode switch device for the Surface Laptop
Studio. The respective driver for this device provides SW_TABLET_MODE
input events for user-space based on the posture of the screen.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624183642.910893-5-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Surface Pro 8
Add a KIP subsystem tablet-mode switch device for the Surface Pro 8.
The respective driver for this device provides SW_TABLET_MODE input
events for user-space based on the state of the keyboard cover (e.g.
detached, folded-back, normal/laptop mode).
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624183642.910893-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Surface Pro 8
Add support for the detachable keyboard cover on the Surface Pro 8.
The keyboard cover on the Surface Pro 8 is, unlike the keyboard covers
of earlier Surface Pro generations, handled via the Surface System
Aggregator Module (SSAM). The keyboard and touchpad (as well as other
HID input devices) of this cover are standard SSAM HID client devices
(just like keyboard and touchpad on e.g. the Surface Laptop 3 and 4),
however, some care needs to be taken as they can be physically detached
(similarly to the Surface Book 3). Specifically, the respective SSAM
client devices need to be removed when the keyboard cover has been
detached and (re-)initialized when the keyboard cover has been
(re-)attached.
On the Surface Pro 8, detachment of the keyboard cover (and by extension
its devices) is managed via the KIP subsystem. Therefore, said devices
need to be registered under the KIP device hub, which in turn will
remove and re-create/re-initialize those devices as needed.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-13-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add a Surface System Aggregator Module (SSAM) client device hub for
hot-removable devices managed via the KIP subsystem.
The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) is a subsystem that manages hot-removable
SSAM client devices. Specifically, it manages HID input devices
contained in the detachable keyboard cover of the Surface Pro 8 and
Surface Pro X.
The KIP subsystem handles a single group of devices (e.g. all devices
contained in the keyboard cover) and cannot handle devices individually.
Thus we model it as a client device hub, which (hot-)removes all devices
contained under it once removal of the hub (e.g. keyboard cover) has
been detected and (re-)adds all devices once the physical hub device has
been (re-)attached. To do this, use the previously generified SSAM
subsystem hub framework.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-12-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use the target category of the (base) hub as instance id in the
(virtual) hub device UID. This makes association of the hub with the
respective subsystem easier.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-11-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface System Aggregator Module (SSAM) has multiple subsystems that
can manage detachable devices. At the moment, we only support the "base"
(BAS/0x11) subsystem, which is used on the Surface Book 3 to manage
devices (including keyboard, touchpad, and secondary battery) connected
to the base of the device.
The Surface Pro 8 has a new type-cover with keyboard and touchpad, which
is managed via the KIP/0x0e subsystem. The general procedure is the
same, but with slightly different events and setup. To make
implementation of the KIP hub easier and prevent duplication, generify
the parts of the base hub that we can use for the KIP hub (or any
potential future subsystem hubs).
This also switches over to use the newly introduced "hot-remove"
functionality, which should prevent communication issues when devices
have been detached.
Lastly, also drop the undocumented and unused sysfs "state" attribute of
the base hub. It has at best been useful for debugging.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-10-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
notifier registration
Use newly introduced client device wrapper functions for notifier
registration and unregistration.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-5-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Rename the device registration function to better align names with the
newly introduced device removal function.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211028002243.1586083-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use generic client removal function introduced in the previous commit
instead of defining our own one.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211028002243.1586083-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add preliminary support for the Surface Pro 8 to the Surface Aggregator
registry. This includes battery/charger status and platform profile
support.
In contrast to earlier Surface Pro generations, the keyboard cover is
now also connected via the Surface Aggregator Module (whereas it was
previously connected via USB or HID-over-I2C). To properly support the
HID devices of that cover, however, more changes regarding hot-removal
of Surface Aggregator client devices as well as a new device hub driver
are required. We will address those things in a follow-up series, so do
not add any HID device IDs just yet.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211028012845.1887219-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for the Surface Laptop Studio.
In contrast to previous Surface Laptop models, this one has its HID
devices attached to target ID 1 (instead of 2). It also has a couple
more of them, including a new notifier for when the pen is stashed /
taken out of its place, a "Sys Control" device, and two other
unidentified HID devices with unknown usages.
Battery and performance profile interfaces remain the same.
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211021130904.862610-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
6th-gen devices
5th- and 6th-generation Surface devices have all SAM clients defined in
ACPI, except for the platform profile/performance mode which his handled
via the WSID (Windows Surface Integration Device). Thus, the node groups
for those devices are the same and we can just use a single one instead
of re-defining the same one over and over again.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Laptop 4
Add support for the 13" Intel version of the Surface Laptop 4.
Use the existing node group for the Surface Laptop 3 since the 15" AMD
version already shares its WSID HID with its predecessor and there don't
seem to be any significant differences with regards to SAM.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Laptop 4
The 15" AMD version of the Surface Laptop 4 shares its WSID HID with the
15" AMD version of the Surface Laptop 3. Update the comments
accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
connecting
Sometimes, the "base connected" event that we rely on to (re-)attach the
device connected to the base is sent a bit too early. When this happens,
some devices may not be completely ready yet.
Specifically, the battery has been observed to report zero-values for
things like full charge capacity, which, however, is only loaded once
when the driver for that device probes. This can thus result in battery
readings being unavailable.
As we cannot easily and reliably discern between devices that are not
ready yet and devices that are not connected (i.e. will never be ready),
delay adding these devices. This should give them enough time to set up.
The delay is set to 2.5 seconds, which should give us a good safety
margin based on testing and still be fairly responsive for users.
To achieve that delay switch to updating via a delayed work struct,
which means that we can also get rid of some locking.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210405231222.358113-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface Pro 7+ is essentially a refresh of the Surface Pro 7 with
updated hardware and a new WSID identifier.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210309162550.302161-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The sparse tool complains as follows:
drivers/platform/surface/surface_aggregator_registry.c:355:30: warning:
symbol 'ssam_base_hub_group' was not declared. Should it be static?
This symbol is not used outside of surface_aggregator_registry.c, so this
commit marks it static.
Fixes: 797e78564634 ("platform/surface: aggregator_registry: Add base device hub")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210309131500.1885772-1-weiyongjun1@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
functions
The SSAM_DEFINE_SYNC_REQUEST_x() macros are intended to reduce
boiler-plate code for SSAM request definitions by defining a wrapper
function for the specified request. The client device variants of those
macros, i.e. SSAM_DEFINE_SYNC_REQUEST_CL_x() in particular rely on the
multi-device (MD) variants, e.g.:
#define SSAM_DEFINE_SYNC_REQUEST_CL_R(name, rtype, spec...) \
SSAM_DEFINE_SYNC_REQUEST_MD_R(__raw_##name, rtype, spec) \
int name(struct ssam_device *sdev, rtype *ret) \
{ \
return __raw_##name(sdev->ctrl, sdev->uid.target, \
sdev->uid.instance, ret); \
}
This now creates the problem that it is not possible to declare the
generated functions static via
static SSAM_DEFINE_SYNC_REQUEST_CL_R(...)
as this will only apply to the function defined by the multi-device
macro, i.e. SSAM_DEFINE_SYNC_REQUEST_MD_R(). Thus compiling with
`-Wmissing-prototypes' rightfully complains that there is a 'static'
keyword missing.
To solve this, make all SSAM_DEFINE_SYNC_REQUEST_x() macros define
static functions. Non-client-device macros are also changed for
consistency. In general, we expect those functions to be only used
locally in the respective drivers for the corresponding interfaces, so
having to define a wrapper function to be able to export this should be
the odd case out.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b78b4982d763 ("platform/surface: Add platform profile driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210304190524.1172197-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add HID subsystem (TC=0x15) devices. These devices need to be registered
for 7th-generation Surface models. On previous generations, these
devices are either provided as platform devices via ACPI (Surface Laptop
1 and 2) or implemented as standard USB device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the detachment system (DTX) SSAM device for the Surface Book 3. This
device is accessible under the base (TC=0x11) subsystem.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the SSAM platform profile device to the SSAM device registry. This
device is accessible under the thermal subsystem (TC=0x03) and needs to
be registered for all Surface models.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add battery subsystem (TC=0x02) devices (battery and AC) to the SSAM
device registry. These devices need to be registered for 7th-generation
Surface models. On 5th- and 6th-generation models, these devices are
handled via the standard ACPI battery/AC interface, which in turn
accesses the same SSAM interface via the Surface ACPI Notify (SAN)
driver.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface Book 3 has a detachable base part. While the top part
(so-called clipboard) contains the CPU, touchscreen, and primary
battery, the base contains, among other things, a keyboard, touchpad,
and secondary battery.
Those devices do not react well to being accessed when the base part is
detached and should thus be removed and added in sync with the base. To
facilitate this, we introduce a virtual base device hub, which
automatically removes or adds the devices registered under it.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface System Aggregator Module (SSAM) subsystem provides various
functionalities, which are separated by spreading them across multiple
devices and corresponding drivers. Parts of that functionality / some of
those devices, however, can (as far as we currently know) not be
auto-detected by conventional means. While older (specifically 5th- and
6th-)generation models do advertise most of their functionality via
standard platform devices in ACPI, newer generations do not.
As we are currently also not aware of any feasible way to query said
functionalities dynamically, this poses a problem. There is, however, a
device in ACPI that seems to be used by Windows for identifying
different Surface models: The Windows Surface Integration Device (WSID).
This device seems to have a HID corresponding to the overall set of
functionalities SSAM provides for the associated model.
This commit introduces a registry providing non-detectable device
information via software nodes. In addition, a SSAM platform hub driver
is introduced, which takes care of creating and managing the SSAM
devices specified in this registry. This approach allows for a
hierarchical setup akin to ACPI and is easily extendable, e.g. via
firmware node properties.
Note that this commit only provides the basis for the platform hub and
registry, and does not add any content to it. The registry will be
expanded in subsequent commits.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
