| Age | Commit message (Collapse) | Author |
|---|
|
when suspended"
Commit e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to
be turned off when suspended") can cause the suspend process to hang as
the pmcdev->lock in the pmc_core_acpi_pm_timer_suspend_resume might already
be held by the pmc_core_mphy_pg_show or pmc_core_pll_show if the userspace
gets frozen when these functions are being executed.
Also, pmc_core_acpi_pm_timer_suspend_resume must not sleep, as this
function is called indirectly by the tick_freeze function in
kernel/time/tick-common.c, which holds the spinlock.
Revert the changes for now to fix these issues.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Luca Coelho <luca@coelho.fi>
Closes: https://lore.kernel.org/lkml/40555604c3f4be43bf72e72d5409eaece4be9320.camel@coelho.fi/
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Link: https://lore.kernel.org/r/20241012182656.2107178-1-mmaslanka@google.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Allow to disable ACPI PM Timer on suspend and enable on resume. A
disabled timer helps optimise power consumption when the system is
suspended. On resume the timer is only reactivated if it was activated
prior to suspend, so unless the ACPI PM timer is enabled in the BIOS,
this won't change anything.
The ACPI PM timer is used by Intel's iTCO/wdat_wdt watchdog to drive the
watchdog, so it doesn't need to run during suspend.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184208.1080710-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Merge the 'platform-drivers-x86-v6.7-6' fixes into pdx86/for-next
so that the "Intel PMC GBE LTR regression" fixes can also be
applied to the new Arrow Lake and Lunar Lake platform support
code in pdx86/for-next .
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add PSON register offsets for Alder Lake PCH that provides an access to
PSON residency counter.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-4-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In order to setup a table of low power mode requirements for Meteor Lake,
pmc_core_get_low_power_modes() will need to be run from platform init code
so that the enabled modes are known, allowing the use of the
pmc_for_each_mode helper. Make the function global and call it from the
platform init code.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-12-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To support platforms with multiple PMCs, add a PMC device structure to
support each PMC instance.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-4-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Combine core_init() and core_configure() functions to have a
cleaner setup for platforms.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-3-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Create adl.c for Alder Lake PCH specific structures and init().
This file supports Alder Lake, Raptor Lake and Raptor Lake S platforms
There are no functional changes involved.
Cc: David E Box <david.e.box@linux.intel.com>
Reviewed-by: "David E. Box" <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20221114183257.2067662-8-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
