| Age | Commit message (Collapse) | Author |
|---|
|
Keep async copy state alive for a few lease cycles after the copy
completes so that OFFLOAD_STATUS returns something meaningful.
This means that NFSD's client shutdown processing needs to purge
any of this state that happens to be waiting to die.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 7862 Section 4.8 states:
> A copy offload stateid will be valid until either (A) the client
> or server restarts or (B) the client returns the resource by
> issuing an OFFLOAD_CANCEL operation or the client replies to a
> CB_OFFLOAD operation.
Instead of releasing async copy state when the CB_OFFLOAD callback
completes, now let it live until the next laundromat run after the
callback completes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently __destroy_client() consults the nfs4_client's async_copies
list to determine whether there are ongoing async COPY operations.
However, NFSD now keeps copy state in that list even when the
async copy has completed, to enable OFFLOAD_STATUS to find the
COPY results for a while after the COPY has completed.
DESTROY_CLIENTID should not be blocked if the client's async_copies
list contains state for only completed copy operations.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 7862 permits callback services to respond to CB_OFFLOAD with
NFS4ERR_DELAY. Currently NFSD drops the CB_OFFLOAD in that case.
To improve the reliability of COPY offload, NFSD should rather send
another CB_OFFLOAD completion notification.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 7862 Section 4.8 states:
> A copy offload stateid will be valid until either (A) the client
> or server restarts or (B) the client returns the resource by
> issuing an OFFLOAD_CANCEL operation or the client replies to a
> CB_OFFLOAD operation.
Currently, NFSD purges the metadata for an async COPY operation as
soon as the CB_OFFLOAD callback has been sent. It does not wait even
for the client's CB_OFFLOAD response, as the paragraph above
suggests that it should.
This makes the OFFLOAD_STATUS operation ineffective during the
window between the completion of an asynchronous COPY and the
server's receipt of the corresponding CB_OFFLOAD response. This is
important if, for example, the client responds with NFS4ERR_DELAY,
or the transport is lost before the server receives the response. A
client might use OFFLOAD_STATUS to query the server about the still
pending asynchronous COPY, but NFSD will respond to OFFLOAD_STATUS
as if it had never heard of the presented copy stateid.
This patch starts to address this issue by extending the lifetime of
struct nfsd4_copy at least until the server has seen the client's
CB_OFFLOAD response, or the CB_OFFLOAD has timed out.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd4_shutdown_copy() is just this:
while ((copy = nfsd4_get_copy(clp)) != NULL)
nfsd4_stop_copy(copy);
nfsd4_get_copy() bumps @copy's reference count, preventing
nfsd4_stop_copy() from releasing @copy.
A while loop like this usually works by removing the first element
of the list, but neither nfsd4_get_copy() nor nfsd4_stop_copy()
alters the async_copies list.
Best I can tell, then, is that nfsd4_shutdown_copy() continues to
loop until other threads manage to remove all the items from this
list. The spinning loop blocks shutdown until these items are gone.
Possibly the reason we haven't seen this issue in the field is
because client_has_state() prevents __destroy_client() from calling
nfsd4_shutdown_copy() if there are any items on this list. In a
subsequent patch I plan to remove that restriction.
Fixes: e0639dc5805a ("NFSD introduce async copy feature")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT do not bypass
only GSS, but bypass any method. This is a problem specially for NFS3
AUTH_NULL-only exports.
The purpose of NFSD_MAY_BYPASS_GSS_ON_ROOT is described in RFC 2623,
section 2.3.2, to allow mounting NFS2/3 GSS-only export without
authentication. So few procedures which do not expose security risk used
during mount time can be called also with AUTH_NONE or AUTH_SYS, to allow
client mount operation to finish successfully.
The problem with current implementation is that for AUTH_NULL-only exports,
the NFSD_MAY_BYPASS_GSS_ON_ROOT is active also for NFS3 AUTH_UNIX mount
attempts which confuse NFS3 clients, and make them think that AUTH_UNIX is
enabled and is working. Linux NFS3 client never switches from AUTH_UNIX to
AUTH_NONE on active mount, which makes the mount inaccessible.
Fix the NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT implementation
and really allow to bypass only exports which have enabled some real
authentication (GSS, TLS, or any other).
The result would be: For AUTH_NULL-only export if client attempts to do
mount with AUTH_UNIX flavor then it will receive access errors, which
instruct client that AUTH_UNIX flavor is not usable and will either try
other auth flavor (AUTH_NULL if enabled) or fails mount procedure.
Similarly if client attempt to do mount with AUTH_NULL flavor and only
AUTH_UNIX flavor is enabled then the client will receive access error.
This should fix problems with AUTH_NULL-only or AUTH_UNIX-only exports if
client attempts to mount it with other auth flavor (e.g. with AUTH_NULL for
AUTH_UNIX-only export, or with AUTH_UNIX for AUTH_NULL-only export).
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSv4.1 OP_EXCHANGE_ID response from server may contain server
implementation details (domain, name and build time) in optional
nfs_impl_id4 field. Currently nfsd does not fill this field.
Send these information in NFSv4.1 OP_EXCHANGE_ID response. Fill them with
the same values as what is Linux NFSv4.1 client doing. Domain is hardcoded
to "kernel.org", name is composed in the same way as "uname -srvm" output
and build time is hardcoded to zeros.
NFSv4.1 client and server implementation fields are useful for statistic
purposes or for identifying type of clients and servers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Turn nfsd_compound_encode_err tracepoint into a class and add a new
nfsd_compound_op_err tracepoint.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Ensure the refcount and async_copies fields are initialized early.
cleanup_async_copy() will reference these fields if an error occurs
in nfsd4_copy(). If they are not correctly initialized, at the very
least, a refcount underflow occurs.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add an nfsd_copy_async_done to record the timestamp, the final
status code, and the callback stateid of an async copy.
Rename the nfsd_copy_do_async tracepoint to match that naming
convention to make it easier to enable both of these with a
single glob.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Nothing appears to limit the number of concurrent async COPY
operations that clients can start. In addition, AFAICT each async
COPY can copy an unlimited number of 4MB chunks, so can run for a
long time. Thus IMO async COPY can become a DoS vector.
Add a restriction mechanism that bounds the number of concurrent
background COPY operations. Start simple and try to be fair -- this
patch implements a per-namespace limit.
An async COPY request that occurs while this limit is exceeded gets
NFS4ERR_DELAY. The requesting client can choose to send the request
again after a delay or fall back to a traditional read/write style
copy.
If there is need to make the mechanism more sophisticated, we can
visit that in future patches.
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, when NFSD handles an asynchronous COPY, it returns a
zero write verifier, relying on the subsequent CB_OFFLOAD callback
to pass the write verifier and a stable_how4 value to the client.
However, if the CB_OFFLOAD never arrives at the client (for example,
if a network partition occurs just as the server sends the
CB_OFFLOAD operation), the client will never receive this verifier.
Thus, if the client sends a follow-up COMMIT, there is no way for
the client to assess the COMMIT result.
The usual recovery for a missing CB_OFFLOAD is for the client to
send an OFFLOAD_STATUS operation, but that operation does not carry
a write verifier in its result. Neither does it carry a stable_how4
value, so the client /must/ send a COMMIT in this case -- which will
always fail because currently there's still no write verifier in the
COPY result.
Thus the server needs to return a normal write verifier in its COPY
result even if the COPY operation is to be performed asynchronously.
If the server recognizes the callback stateid in subsequent
OFFLOAD_STATUS operations, then obviously it has not restarted, and
the write verifier the client received in the COPY result is still
valid and can be used to assess a COMMIT of the copied data, if one
is needed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Keep track of the "main" opcode for the callback, and display it in the
tracepoint. This makes it simpler to discern what's happening when there
is more than one callback in flight.
The one special case is the CB_NULL RPC. That's not a CB_COMPOUND
opcode, so designate the value 0 for that.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If an NFS operation expects a particular sort of object (file, dir, link,
etc) but gets a file handle for a different sort of object, it must
return an error. The actual error varies among NFS versions in non-trivial
ways.
For v2 and v3 there are ISDIR and NOTDIR errors and, for NFSv4 only,
INVAL is suitable.
For v4.0 there is also NFS4ERR_SYMLINK which should be used if a SYMLINK
was found when not expected. This take precedence over NOTDIR.
For v4.1+ there is also NFS4ERR_WRONG_TYPE which should be used in
preference to EINVAL when none of the specific error codes apply.
When nfsd_mode_check() finds a symlink where it expected a directory it
needs to return an error code that can be converted to NOTDIR for v2 or
v3 but will be SYMLINK for v4. It must be different from the error
code returns when it finds a symlink but expects a regular file - that
must be converted to EINVAL or SYMLINK.
So we introduce an internal error code nfserr_symlink_not_dir which each
version converts as appropriate.
nfsd_check_obj_isreg() is similar to nfsd_mode_check() except that it is
only used by NFSv4 and only for OPEN. NFSERR_INVAL is never a suitable
error if the object is the wrong time. For v4.0 we use nfserr_symlink
for non-dirs even if not a symlink. For v4.1 we have nfserr_wrong_type.
We handle this difference in-place in nfsd_check_obj_isreg() as there is
nothing to be gained by delaying the choice to nfsd4_map_status().
As a result of these changes, nfsd_mode_check() doesn't need an rqstp
arg any more.
Note that NFSv4 operations are actually performed in the xdr code(!!!)
so to the only place that we can map the status code successfully is in
nfsd4_encode_operation().
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rather than passing the whole rqst, pass the pieces that are actually
needed. This makes the inputs to rqst_exp_find() more obvious.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Move the stateid handling to nfsd4_copy_notify.
If nfs4_preprocess_stateid_op did not produce an output stateid, error out.
Copy notify specifically does not permit the use of special stateids,
so enforce that outside generic stateid pre-processing.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I noticed LAYOUTGET(LAYOUTIOMODE4_RW) returning NFS4ERR_ACCESS
unexpectedly. The NFS client had created a file with mode 0444, and
the server had returned a write delegation on the OPEN(CREATE). The
client was requesting a RW layout using the write delegation stateid
so that it could flush file modifications.
Creating a read-only file does not seem to be problematic for
NFSv4.1 without pNFS, so I began looking at NFSD's implementation of
LAYOUTGET.
The failure was because fh_verify() was doing a permission check as
part of verifying the FH presented during the LAYOUTGET. It uses the
loga_iomode value to specify the @accmode argument to fh_verify().
fh_verify(MAY_WRITE) on a file whose mode is 0444 fails with -EACCES.
To permit LAYOUT* operations in this case, add OWNER_OVERRIDE when
checking the access permission of the incoming file handle for
LAYOUTGET and LAYOUTCOMMIT.
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v6.6+
Message-Id: 4E9C0D74-A06D-4DC3-A48A-73034DC40395@oracle.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We've discovered that delivering a CB_OFFLOAD operation can be
unreliable in some pretty unremarkable situations. Examples
include:
- The server dropped the connection because it lost a forechannel
NFSv4 request and wishes to force the client to retransmit
- The GSS sequence number window under-flowed
- A network partition occurred
When that happens, all pending callback operations, including
CB_OFFLOAD, are lost. NFSD does not retransmit them.
Moreover, the Linux NFS client does not yet support sending an
OFFLOAD_STATUS operation to probe whether an asynchronous COPY
operation has finished. Thus, on Linux NFS clients, when a
CB_OFFLOAD is lost, asynchronous COPY can hang until manually
interrupted.
I've tried a couple of remedies, but so far the side-effects are
worse than the disease and they have had to be reverted. So
temporarily force COPY operations to be synchronous so that the use
of CB_OFFLOAD is avoided entirely. This is a fix that can easily be
backported to LTS kernels. I am working on client patches that
introduce an implementation of OFFLOAD_STATUS.
Note that NFSD arbitrarily limits the size of a copy_file_range
to 4MB to avoid indefinitely blocking an nfsd thread. A short
COPY result is returned in that case, and the client can present
a fresh COPY request for the remainder.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clients that send an OFFLOAD_STATUS might want to distinguish
between an async COPY operation that is still running, has
completed successfully, or that has failed.
The intention of this patch is to make NFSD behave like this:
* Copy still running:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied
so far, and an empty osr_status array
* Copy completed successfully:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied,
and an osr_status of NFS4_OK
* Copy failed:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied,
and an osr_status other than NFS4_OK
* Copy operation lost, canceled, or otherwise unrecognized:
OFFLOAD_STATUS returns NFS4ERR_BAD_STATEID
NB: Though RFC 7862 Section 11.2 lists a small set of NFS status
codes that are valid for OFFLOAD_STATUS, there do not seem to be any
explicit spec limits on the status codes that may be returned in the
osr_status field.
At this time we have no unit tests for COPY and its brethren, as
pynfs does not yet implement support for NFSv4.2.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
After a client has started an asynchronous COPY operation, a
subsequent OFFLOAD_STATUS operation will need to report the status
code once that COPY operation has completed. The recorded status
record will be used by a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This adds basic infrastructure for handing GET_DIR_DELEGATION calls from
clients, including the decoders and encoders. For now, it always just
returns NFS4_OK + GDD4_UNAVAIL.
Eventually clients may start sending this operation, and it's better if
we can return GDD4_UNAVAIL instead of having to abort the whole compound.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The main point of the guarded SETATTR is to prevent races with other
WRITE and SETATTR calls. That requires that the check of the guard time
against the inode ctime be done after taking the inode lock.
Furthermore, we need to take into account the 32-bit nature of
timestamps in NFSv3, and the possibility that files may change at a
faster rate than once a second.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit bb4d53d66e4b ("NFSD: use (un)lock_inode instead of
fh_(un)lock for file operations") broke the NFSv3 pre/post op
attributes behaviour when doing a SETATTR rpc call by stripping out
the calls to fh_fill_pre_attrs() and fh_fill_post_attrs().
Fixes: bb4d53d66e4b ("NFSD: use (un)lock_inode instead of fh_(un)lock for file operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Message-ID: <20240216012451.22725-1-trondmy@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We have a global set of counters that we modify for all of the nfsd
operations, but now that we're exposing these stats across all network
namespaces we need to make the stats also be per-network namespace. We
already have some caching stats that are per-network namespace, so move
these definitions into the same counter and then adjust all the helpers
and users of these stats to provide the appropriate nfsd_net struct so
that the stats are maintained for the per-network namespace objects.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Avoid the use of an atomic bitop, and prepare for adding a run-time
switch for using splice reads.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull nfsd updates from Chuck Lever:
"This release completes the SunRPC thread scheduler work that was begun
in v6.6. The scheduler can now find an svc thread to wake in constant
time and without a list walk. Thanks again to Neil Brown for this
overhaul.
Lorenzo Bianconi contributed infrastructure for a netlink-based NFSD
control plane. The long-term plan is to provide the same functionality
as found in /proc/fs/nfsd, plus some interesting additions, and then
migrate the NFSD user space utilities to netlink.
A long series to overhaul NFSD's NFSv4 operation encoding was applied
in this release. The goals are to bring this family of encoding
functions in line with the matching NFSv4 decoding functions and with
the NFSv2 and NFSv3 XDR functions, preparing the way for better memory
safety and maintainability.
A further improvement to NFSD's write delegation support was
contributed by Dai Ngo. This adds a CB_GETATTR callback, enabling the
server to retrieve cached size and mtime data from clients holding
write delegations. If the server can retrieve this information, it
does not have to recall the delegation in some cases.
The usual panoply of bug fixes and minor improvements round out this
release. As always I am grateful to all contributors, reviewers, and
testers"
* tag 'nfsd-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (127 commits)
svcrdma: Fix tracepoint printk format
svcrdma: Drop connection after an RDMA Read error
NFSD: clean up alloc_init_deleg()
NFSD: Fix frame size warning in svc_export_parse()
NFSD: Rewrite synopsis of nfsd_percpu_counters_init()
nfsd: Clean up errors in nfs3proc.c
nfsd: Clean up errors in nfs4state.c
NFSD: Clean up errors in stats.c
NFSD: simplify error paths in nfsd_svc()
NFSD: Clean up nfsd4_encode_seek()
NFSD: Clean up nfsd4_encode_offset_status()
NFSD: Clean up nfsd4_encode_copy_notify()
NFSD: Clean up nfsd4_encode_copy()
NFSD: Clean up nfsd4_encode_test_stateid()
NFSD: Clean up nfsd4_encode_exchange_id()
NFSD: Clean up nfsd4_do_encode_secinfo()
NFSD: Clean up nfsd4_encode_access()
NFSD: Clean up nfsd4_encode_readdir()
NFSD: Clean up nfsd4_encode_entry4()
NFSD: Add an nfsd4_encode_nfs_cookie4() helper
...
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-50-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace open-coded encoding logic with the use of conventional XDR
utility functions.
Note that if we replace the cpn_sec and cpn_nsec fields with a
single struct timespec64 field, the encoder can use
nfsd4_encode_nfstime4(), as that is the data type specified by the
XDR spec.
NFS4ERR_INVAL seems inappropriate if the encoder doesn't support
encoding the response. Instead use NFS4ERR_SERVERFAULT, since this
condition is a software bug on the server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
An XDR encoder is responsible for marshaling results, not releasing
memory that was allocated by the upper layer. We have .op_release
for that purpose.
Move the release of the ld_owner.data string to op_release functions
for LOCK and LOCKT.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Adopt the use of conventional XDR utility functions. Restructure
the encoder to better align with the XDR definition of the result.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc threads are currently stopped using kthread_stop(). This requires
identifying a specific thread. However we don't care which thread
stops, just as long as one does.
So instead, set a flag in the svc_pool to say that a thread needs to
die, and have each thread check this flag instead of calling
kthread_should_stop(). The first thread to find and clear this flag
then moves towards exiting.
This removes an explicit dependency on sp_all_threads which will make a
future patch simpler.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add trace points on destination server to track inter and intra
server copy operations.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Tested-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prepare for adding server copy trace points.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Tested-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nfsd sends the transposed directory change info in the RENAME reply. The
source directory is in save_fh and the target is in current_fh.
Reported-by: Zhi Li <yieli@redhat.com>
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2218844
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The original implementation of nfsd used signals to stop threads during
shutdown.
In Linux 2.3.46pre5 nfsd gained the ability to shutdown threads
internally it if was asked to run "0" threads. After this user-space
transitioned to using "rpc.nfsd 0" to stop nfsd and sending signals to
threads was no longer an important part of the API.
In commit 3ebdbe5203a8 ("SUNRPC: discard svo_setup and rename
svc_set_num_threads_sync()") (v5.17-rc1~75^2~41) we finally removed the
use of signals for stopping threads, using kthread_stop() instead.
This patch makes the "obvious" next step and removes the ability to
signal nfsd threads - or any svc threads. nfsd stops allowing signals
and we don't check for their delivery any more.
This will allow for some simplification in later patches.
A change worth noting is in nfsd4_ssc_setup_dul(). There was previously
a signal_pending() check which would only succeed when the thread was
being shut down. It should really have tested kthread_should_stop() as
well. Now it just does the latter, not the former.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In the event that we can't fetch post_op_attr attributes, we still need
to set a value for the after_change. The operation has already happened,
so we're not able to return an error at that point, but we do want to
ensure that the client knows that its cache should be invalidated.
If we weren't able to fetch post-op attrs, then just set the
after_change to before_change + 1. The atomic flag should already be
clear in this case.
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
At one time, nfsd would scrape inode information directly out of struct
inode in order to populate the change_info4. At that time, the BUG_ON in
set_change_info made some sense, since having it unset meant a coding
error.
More recently, it calls vfs_getattr to get this information, which can
fail. If that fails, fh_pre_saved can end up not being set. While this
situation is unfortunate, we don't need to crash the box.
Move set_change_info to nfs4proc.c since all of the callers are there.
Revise the condition for setting "atomic" to also check for
fh_pre_saved. Drop the BUG_ON and just have it zero out both
change_attr4s when this occurs.
Reported-by: Boyang Xue <bxue@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2223560
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Collecting pre_op_attrs can fail, in which case it's probably best to
fail the whole operation.
Change fh_fill_pre_attrs and fh_fill_both_attrs to return __be32, and
have the callers check the return code and abort the operation if it's
not nfs_ok.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When nfsd4_copy fails to allocate memory for async_copy->cp_src, or
nfs4_init_copy_state fails, it calls cleanup_async_copy to do the
cleanup for the async_copy which causes page fault since async_copy
is not yet initialized.
This patche rearranges the order of initializing the fields in
async_copy and adds checks in cleanup_async_copy to skip un-initialized
fields.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Fixes: 87689df69491 ("NFSD: Shrink size of struct nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The reference count of nfsd4_ssc_umount_item is not decremented
on error conditions. This prevents the laundromat from unmounting
the vfsmount of the source file.
This patch decrements the reference count of nfsd4_ssc_umount_item
on error.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There are two different flavors of the nfsd4_copy struct. One is
embedded in the compound and is used directly in synchronous copies. The
other is dynamically allocated, refcounted and tracked in the client
struture. For the embedded one, the cleanup just involves releasing any
nfsd_files held on its behalf. For the async one, the cleanup is a bit
more involved, and we need to dequeue it from lists, unhash it, etc.
There is at least one potential refcount leak in this code now. If the
kthread_create call fails, then both the src and dst nfsd_files in the
original nfsd4_copy object are leaked.
The cleanup in this codepath is also sort of weird. In the async copy
case, we'll have up to four nfsd_file references (src and dst for both
flavors of copy structure). They are both put at the end of
nfsd4_do_async_copy, even though the ones held on behalf of the embedded
one outlive that structure.
Change it so that we always clean up the nfsd_file refs held by the
embedded copy structure before nfsd4_copy returns. Rework
cleanup_async_copy to handle both inter and intra copies. Eliminate
nfsd4_cleanup_intra_ssc since it now becomes a no-op.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
At first, I thought this might be a source of nfsd_file overputs, but
the current callers seem to avoid an extra put when nfsd4_verify_copy
returns an error.
Still, it's "bad form" to leave the pointers filled out when we don't
have a reference to them anymore, and that might lead to bugs later.
Zero them out as a defensive coding measure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We're not doing any blocking operations for OP_OFFLOAD_STATUS, so taking
and putting a reference is a waste of effort. Take the client lock,
search for the copy and fetch the wr_bytes_written field and return.
Also, make find_async_copy a static function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
- Improves counting accuracy
- Reduces cross-CPU memory traffic
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.
The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.
The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ]
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
|
|
If signal_pending() returns true, schedule_timeout() will not be executed,
causing the waiting task to remain in the wait queue.
Fixed by adding a call to finish_wait(), which ensures that the waiting
task will always be removed from the wait queue.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Found via KCSAN.
Fixes: 28df0988815f ("SUNRPC: Use RMW bitops in single-threaded hot paths")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
