| Age | Commit message (Collapse) | Author |
|---|
|
Syzbot reports a slab out of bounds access in squashfs_readpage_block().
This is caused by an attempt to read page index 0x2000000000. This value
(start_index) is stored in an integer loop variable which overflows
producing a value of 0. This causes a loop which iterates over pages
start_index -> end_index to iterate over 0 -> end_index, which ultimately
causes an out of bounds page array access.
Fix by changing variable to a loff_t, and rename to index to make it
clearer it is a page index, and not a loop count.
Link: https://lkml.kernel.org/r/20241020232200.837231-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZwzcnCAosIPqQ9Ie@ly-workstation/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
|
|
When strict percpu address space checks are enabled, then current direct
casts between the percpu address space and the generic address space fail
the compilation on x86_64 with:
decompressor_multi_percpu.c: In function `squashfs_decompressor_create':
decompressor_multi_percpu.c:49:16: error: cast to generic address space pointer from disjoint `__seg_gs' address space pointer
decompressor_multi_percpu.c: In function `squashfs_decompressor_destroy':
decompressor_multi_percpu.c:64:25: error: cast to `__seg_gs' address space pointer from disjoint generic address space pointer
decompressor_multi_percpu.c: In function `squashfs_decompress':
decompressor_multi_percpu.c:82:25: error: cast to `__seg_gs' address space pointer from disjoint generic address space pointer
Add intermediate casts to unsigned long, as advised in [1] and [2].
Side note: sparse still requires __force when casting from the percpu
address space, although the documentation [2] allows casts to unsigned
long without __force attribute.
Found by GCC's named address space checks.
There were no changes in the resulting object file.
[1] https://gcc.gnu.org/onlinedocs/gcc/Named-Address-Spaces.html#x86-Named-Address-Spaces
[2] https://sparse.docs.kernel.org/en/latest/annotations.html#address-space-name
Link: https://lkml.kernel.org/r/20240830091104.13049-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the recent work to remove page->index, a sanity check
that ensured all the readhead pages were covered by the
Squashfs data block was removed [1].
To avoid any regression, this commit adds the sanity check
back in an equivalent way. Namely the page actor will now
return error if any pages are unused after completion.
[1] https://lore.kernel.org/all/20240818235847.170468-3-phillip@squashfs.org.uk/
--
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240822233106.121522-1-phillip@squashfs.org.uk
V3: last_page should be actor->last_page
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
page->index
The previous implementation lacked error checking (e.g. the bytes
returned by squashfs_fill_page() is not checked), and the use of
page->index could not be removed without substantially rewriting
the routine to use the page actor abstraction used elsewhere.
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240818235847.170468-5-phillip@squashfs.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This commit replaces references to page->index to folio->index or
their equivalent.
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240818235847.170468-4-phillip@squashfs.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This commit removes references to page->index in the pages returned
from __readahead_batch(), and instead uses the 'start' variable.
This does reveal a bug in the previous code in that 'start' was
not updated every time around the loop. This is fixed in this
commit.
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240818235847.170468-3-phillip@squashfs.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This commit removes an unnecessary use of page->index,
and moves the other use over to folio->index.
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240818235847.170468-2-phillip@squashfs.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Syzkiller reports a "KMSAN: uninit-value in pick_link" bug.
This is caused by an uninitialised page, which is ultimately caused
by a corrupted symbolic link size read from disk.
The reason why the corrupted symlink size causes an uninitialised
page is due to the following sequence of events:
1. squashfs_read_inode() is called to read the symbolic
link from disk. This assigns the corrupted value
3875536935 to inode->i_size.
2. Later squashfs_symlink_read_folio() is called, which assigns
this corrupted value to the length variable, which being a
signed int, overflows producing a negative number.
3. The following loop that fills in the page contents checks that
the copied bytes is less than length, which being negative means
the loop is skipped, producing an uninitialised page.
This patch adds a sanity check which checks that the symbolic
link size is not larger than expected.
--
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240811232821.13903-1-phillip@squashfs.org.uk
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Reported-by: syzbot+24ac24ff58dc5b0d26b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a90e8c061e86a76b@google.com/
V2: fix spelling mistake.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
|
|
Nobody checks the error flag on squashfs folios, so stop setting it.
Link: https://lkml.kernel.org/r/20240420025029.2166544-24-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove use of page APIs, return the errno instead of 0, switch from
kmap_atomic to kmap_local and use folio_end_read() to unify the two exit
paths.
Link: https://lkml.kernel.org/r/20240420025029.2166544-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Squashfs copied the passed string (name) into a temporary buffer to ensure
it was NUL-terminated. This however is completely unnecessary as the
string is already NUL-terminated. So remove the deprecated strncpy() by
completely removing the string copy.
The background behind this unnecessary string copy is that it dates back
to the days when Squashfs was an out of kernel patch. The code
deliberately did not assume the string was NUL-terminated in case in
future this changed (due to kernel changes). This would mean the out of
tree patches would be broken but still compile OK.
Link: https://lkml.kernel.org/r/20240403183352.391308-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syskiller has produced an out of bounds access in fill_meta_index().
That out of bounds access is ultimately caused because the inode
has an inode number with the invalid value of zero, which was not checked.
The reason this causes the out of bounds access is due to following
sequence of events:
1. Fill_meta_index() is called to allocate (via empty_meta_index())
and fill a metadata index. It however suffers a data read error
and aborts, invalidating the newly returned empty metadata index.
It does this by setting the inode number of the index to zero,
which means unused (zero is not a valid inode number).
2. When fill_meta_index() is subsequently called again on another
read operation, locate_meta_index() returns the previous index
because it matches the inode number of 0. Because this index
has been returned it is expected to have been filled, and because
it hasn't been, an out of bounds access is performed.
This patch adds a sanity check which checks that the inode number
is not zero when the inode is created and returns -EINVAL if it is.
[phillip@squashfs.org.uk: whitespace fix]
Link: https://lkml.kernel.org/r/20240409204723.446925-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20240408220206.435788-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: "Ubisectech Sirius" <bugreport@ubisectech.com>
Closes: https://lore.kernel.org/lkml/87f5c007-b8a5-41ae-8b57-431e924c5915.bugreport@ubisectech.com/
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sysbot reports a slab out of bounds write in squashfs_readahead().
This is ultimately caused by a file reporting an (infeasibly) large file
size (1407374883553280 bytes) with the minimum block size of 4K.
This causes variable overflow.
Link: https://lkml.kernel.org/r/20231113160901.6444-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+604424eb051c2f696163@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000b1fda20609ede0d1@google.com/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the length passed in is 0, the pagemap_scan_test_walk() caller should
bail. This error causes at least a WARN_ON().
Link: https://lkml.kernel.org/r/20231116031352.40853-1-lizhi.xu@windriver.com
Reported-by: syzbot+32d3767580a1ea339a81@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000000526f2060a30a085@google.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fanotify fsid updates from Christian Brauner:
"This work is part of the plan to enable fanotify to serve as a drop-in
replacement for inotify. While inotify is availabe on all filesystems,
fanotify currently isn't.
In order to support fanotify on all filesystems two things are needed:
(1) all filesystems need to support AT_HANDLE_FID
(2) all filesystems need to report a non-zero f_fsid
This contains (1) and allows filesystems to encode non-decodable file
handlers for fanotify without implementing any exportfs operations by
encoding a file id of type FILEID_INO64_GEN from i_ino and
i_generation.
Filesystems that want to opt out of encoding non-decodable file ids
for fanotify that don't support NFS export can do so by providing an
empty export_operations struct.
This also partially addresses (2) by generating f_fsid for simple
filesystems as well as freevxfs. Remaining filesystems will be dealt
with by separate patches.
Finally, this contains the patch from the current exportfs maintainers
which moves exportfs under vfs with Chuck, Jeff, and Amir as
maintainers and vfs.git as tree"
* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: create an entry for exportfs
fs: fix build error with CONFIG_EXPORTFS=m or not defined
freevxfs: derive f_fsid from bdev->bd_dev
fs: report f_fsid from s_dev for "simple" filesystems
exportfs: support encoding non-decodeable file handles by default
exportfs: define FILEID_INO64_GEN* file handle types
exportfs: make ->encode_fh() a mandatory method for NFS export
exportfs: add helpers to check if filesystem can encode/decode file handles
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
|
|
Rename the default helper for encoding FILEID_INO32_GEN* file handles to
generic_encode_ino32_fh() and convert the filesystems that used the
default implementation to use the generic helper explicitly.
After this change, exportfs_encode_inode_fh() no longer has a default
implementation to encode FILEID_INO32_GEN* file handles.
This is a step towards allowing filesystems to encode non-decodeable
file handles for fanotify without having to implement any
export_operations.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-3-amir73il@gmail.com
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-68-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This makes it harder for accidental or malicious changes to
squashfs_xattr_handlers at runtime.
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-25-wedsonaf@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-73-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Migration replaces the page in the mapping before copying the contents and
the flags over from the old page, so check that the page in the page cache
is really up to date before using it. Without this, stressing squashfs
reads with parallel compaction sometimes results in squashfs reporting
data corruption.
Link: https://lkml.kernel.org/r/20230629-squashfs-cache-migration-v1-1-d50ebe55099d@axis.com
Fixes: e994f5b677ee ("squashfs: cache partial compressed blocks")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before commit 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block
usage to BIO"), compressed blocks read by squashfs were cached in the page
cache, but that is not the case after that commit. That has lead to
squashfs having to re-read a lot of sectors from disk/flash.
For example, the first sectors of every metadata block need to be read
twice from the disk. Once partially to read the length, and a second time
to read the block itself. Also, in linear reads of large files, the last
sectors of one data block are re-read from disk when reading the next data
block, since the compressed blocks are of variable sizes and not aligned
to device blocks. This extra I/O results in a degrade in read performance
of, for example, ~16% in one scenario on my ARM platform using squashfs
with dm-verity and NAND.
Since the decompressed data is cached in the page cache or squashfs'
internal metadata and fragment caches, caching _all_ compressed pages
would lead to a lot of double caching and is undesirable. But make the
code cache any disk blocks which were only partially requested, since
these are the ones likely to include data which is needed by other file
system blocks. This restores read performance in my test scenario.
The compressed block caching is only applied when the disk block size is
equal to the page size, to avoid having to deal with caching sub-page
reads.
[akpm@linux-foundation.org: fs/squashfs/block.c needs linux/pagemap.h]
[vincent.whitchurch@axis.com: fix page update race]
Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-1-d54a7fa23e7b@axis.com
[vincent.whitchurch@axis.com: fix page indices]
Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-2-d54a7fa23e7b@axis.com
[akpm@linux-foundation.org: fix layout, per hch]
Link: https://lkml.kernel.org/r/20230510-squashfs-cache-v4-1-3bd394e1ee71@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Squashfs has stopped using buffers heads in 93e72b3c612adcaca1
("squashfs: migrate from ll_rw_block usage to BIO").
Link: https://lkml.kernel.org/r/20230517071622.245151-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This fix was nacked by Philip, for reasons identified in the email linked
below.
Link: https://lkml.kernel.org/r/68f15d67-8945-2728-1f17-5b53a80ec52d@squashfs.org.uk
Fixes: 72e544b1b28325 ("squashfs: harden sanity check in squashfs_read_xattr_id_table")
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A Sysbot [1] corrupted filesystem exposes two flaws in the handling and
sanity checking of the xattr_ids count in the filesystem. Both of these
flaws cause computation overflow due to incorrect typing.
In the corrupted filesystem the xattr_ids value is 4294967071, which
stored in a signed variable becomes the negative number -225.
Flaw 1 (64-bit systems only):
The signed integer xattr_ids variable causes sign extension.
This causes variable overflow in the SQUASHFS_XATTR_*(A) macros. The
variable is first multiplied by sizeof(struct squashfs_xattr_id) where the
type of the sizeof operator is "unsigned long".
On a 64-bit system this is 64-bits in size, and causes the negative number
to be sign extended and widened to 64-bits and then become unsigned. This
produces the very large number 18446744073709548016 or 2^64 - 3600. This
number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and
divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0
(stored in len).
Flaw 2 (32-bit systems only):
On a 32-bit system the integer variable is not widened by the unsigned
long type of the sizeof operator (32-bits), and the signedness of the
variable has no effect due it always being treated as unsigned.
The above corrupted xattr_ids value of 4294967071, when multiplied
overflows and produces the number 4294963696 or 2^32 - 3400. This number
when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by
SQUASHFS_METADATA_SIZE overflows again and produces a length of 0.
The effect of the 0 length computation:
In conjunction with the corrupted xattr_ids field, the filesystem also has
a corrupted xattr_table_start value, where it matches the end of
filesystem value of 850.
This causes the following sanity check code to fail because the
incorrectly computed len of 0 matches the incorrect size of the table
reported by the superblock (0 bytes).
len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids);
indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids);
/*
* The computed size of the index table (len bytes) should exactly
* match the table start and end points
*/
start = table_start + sizeof(*id_table);
end = msblk->bytes_used;
if (len != (end - start))
return ERR_PTR(-EINVAL);
Changing the xattr_ids variable to be "usigned int" fixes the flaw on a
64-bit system. This relies on the fact the computation is widened by the
unsigned long type of the sizeof operator.
Casting the variable to u64 in the above macro fixes this flaw on a 32-bit
system.
It also means 64-bit systems do not implicitly rely on the type of the
sizeof operator to widen the computation.
[1] https://lore.kernel.org/lkml/000000000000cd44f005f1a0f17f@google.com/
Link: https://lkml.kernel.org/r/20230127061842.10965-1-phillip@squashfs.org.uk
Fixes: 506220d2ba21 ("squashfs: add more sanity checks in xattr id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: <syzbot+082fa4af80a5bb1a9843@syzkaller.appspotmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While mounting a corrupted filesystem, a signed integer '*xattr_ids' can
become less than zero. This leads to the incorrect computation of 'len'
and 'indexes' values which can cause null-ptr-deref in copy_bio_to_actor()
or out-of-bounds accesses in the next sanity checks inside
squashfs_read_xattr_id_table().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Link: https://lkml.kernel.org/r/20230117105226.329303-2-pchelkin@ispras.ru
Fixes: 506220d2ba21 ("squashfs: add more sanity checks in xattr id lookup")
Reported-by: <syzbot+082fa4af80a5bb1a9843@syzkaller.appspotmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull squashfs update from Seth Forshee:
"This is a simple patch to enable idmapped mounts for squashfs.
All functionality squashfs needs to support idmapped mounts is already
implemented in generic VFS code, so all that is needed is to set
FS_ALLOW_IDMAP in fs_flags"
* tag 'fs.idmapped.squashfs.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
squashfs: enable idmapped mounts
|
|
When squashfs_read_table() returns an error or `sb->s_magic !=
SQUASHFS_MAGIC`, enters the error branch and calls
msblk->thread_ops->destroy(msblk) to destroy msblk. However,
msblk->thread_ops has not been initialized. Therefore, the following
problem is triggered:
==================================================================
BUG: KASAN: null-ptr-deref in squashfs_fill_super+0xe7a/0x13b0
Read of size 8 at addr 0000000000000008 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc3-next-20221031 #367
Call Trace:
<TASK>
dump_stack_lvl+0x73/0x9f
print_report+0x743/0x759
kasan_report+0xc0/0x120
__asan_load8+0xd3/0x140
squashfs_fill_super+0xe7a/0x13b0
get_tree_bdev+0x27b/0x450
squashfs_get_tree+0x19/0x30
vfs_get_tree+0x49/0x150
path_mount+0xaae/0x1350
init_mount+0xad/0x100
do_mount_root+0xbc/0x1d0
mount_block_root+0x173/0x316
mount_root+0x223/0x236
prepare_namespace+0x1eb/0x237
kernel_init_freeable+0x528/0x576
kernel_init+0x29/0x250
ret_from_fork+0x1f/0x30
</TASK>
==================================================================
To solve this issue, msblk->thread_ops is initialized immediately after
msblk is assigned a value.
Link: https://lkml.kernel.org/r/20221101073343.3961562-1-libaokun1@huawei.com
Fixes: b0645770d3c7 ("squashfs: add the mount parameter theads=<single|multi|percpu>")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maximum number of threads in the decompressor_multi.c file is fixed
and cannot be adjusted according to user needs. Therefore, the mount
parameter needs to be added to allow users to configure the number of
threads as required. The upper limit is num_online_cpus() * 2.
Link: https://lkml.kernel.org/r/20221019030930.130456-3-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Jianguo Chen <chenjianguo3@huawei.com>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series 'squashfs: Add the mount parameter "threads="'.
Currently, Squashfs supports multiple decompressor parallel modes.
However, this mode can be configured only during kernel building and does
not support flexible selection during runtime.
In the current patch set, the mount parameter "threads=" is added to allow
users to select the parallel decompressor mode and configure the number of
decompressors when mounting a file system.
"threads=<single|multi|percpu|1|2|3|...>"
The upper limit is num_online_cpus() * 2.
This patch (of 2):
Squashfs supports three decompression concurrency modes:
Single-thread mode: concurrent reads are blocked and the memory
overhead is small.
Multi-thread mode/percpu mode: reduces concurrent read blocking but
increases memory overhead.
The corresponding schema must be fixed at compile time. During mounting,
the concurrent decompression mode cannot be adjusted based on file read
blocking.
The mount parameter theads=<single|multi|percpu> is added to select
the concurrent decompression mode of a single SquashFS file system
image.
Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com
Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Jianguo Chen <chenjianguo3@huawei.com>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For squashfs all needed functionality for idmapped mounts is already
implemented by the generic handlers in the VFS. Thus, it is sufficient
to just enable the corresponding FS_ALLOW_IDMAP flag to support
idmapped mounts.
We use this for unprivileged (user namespaced) containers based on
squashfs images as rootfs in GyroidOS.
A simple test using the mount-idmapped tool executed as user with
uid=1000 looks as follows:
$ mkdir test
$ echo "test" > test/test_file
$ mksquashfs test/ fs.img
$ sudo mkdir /mnt/test
$ sudo mkdir /mnt/mapped
$ sudo mount fs.img -o loop /mnt/test/
$ sudo ./mount-idmapped --map-mount b:1000:2000:1 /mnt/test/ /mnt/mapped/
$ mount | tail -n2
fs.img on /mnt/test type squashfs (ro,relatime,errors=continue)
fs.img on /mnt/mapped type squashfs (ro,relatime,idmapped,errors=continue)
$ ls -lan /mnt/test/
total 5
drwxr-xr-x 2 1000 1000 32 Okt 24 13:36 .
drwxr-xr-x 6 0 0 4096 Okt 24 13:38 ..
-rw-r--r-- 1 1000 1000 5 Okt 24 13:36 test_file
$ ls -lan /mnt/mapped/
total 5
drwxr-xr-x 2 2000 2000 32 Okt 24 13:36 .
drwxr-xr-x 6 0 0 4096 Okt 24 13:38 ..
-rw-r--r-- 1 2000 2000 5 Okt 24 13:36 test_file
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Fix a buffer release race condition, where the error value was used after
release.
Link: https://lkml.kernel.org/r/20221020223616.7571-4-phillip@squashfs.org.uk
Fixes: b09a7a036d20 ("squashfs: support reading fragments in readahead call")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: Marc Miltenberger <marcmiltenberger@gmail.com>
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Slade Watkins <srw@sladewatkins.net>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The readahead code will try to extend readahead to the entire size of the
Squashfs data block.
But, it didn't take into account that the last block at the end of the
file may not be a whole block. In this case, the code would extend
readahead to beyond the end of the file, leaving trailing pages.
Fix this by only requesting the expected number of pages.
Link: https://lkml.kernel.org/r/20221020223616.7571-3-phillip@squashfs.org.uk
Fixes: 8fc78b6fe24c ("squashfs: implement readahead")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: Marc Miltenberger <marcmiltenberger@gmail.com>
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Slade Watkins <srw@sladewatkins.net>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "squashfs: fix some regressions introduced in the readahead
code".
This patchset fixes 3 regressions introduced by the recent readahead code
changes. The first regression is causing "snaps" to randomly fail after a
couple of hours or days, which how the regression came to light.
This patch (of 3):
If a file isn't a whole multiple of the page size, the last page will have
trailing bytes unfilled.
There was a mistake in the readahead code which did this. In particular
it incorrectly assumed that the last page in the readahead page array
(page[nr_pages - 1]) will always contain the last page in the block, which
if we're at file end, will be the page that needs to be zero filled.
But the readahead code may not return the last page in the block, which
means it is unmapped and will be skipped by the decompressors (a temporary
buffer used).
In this case the zero filling code will zero out the wrong page, leading
to data corruption.
Fix this by by extending the "page actor" to return the last page if
present, or NULL if a temporary buffer was used.
Link: https://lkml.kernel.org/r/20221020223616.7571-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20221020223616.7571-2-phillip@squashfs.org.uk
Fixes: 8fc78b6fe24c ("squashfs: implement readahead")
Link: https://lore.kernel.org/lkml/b0c258c3-6dcf-aade-efc4-d62a8b3a1ce2@alu.unizg.hr/
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: Marc Miltenberger <marcmiltenberger@gmail.com>
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The decompressors may be called while in an atomic section. So move the
kmalloc() out of this path, and into the "page actor" init function.
This fixes a regression introduced by commit
f268eedddf35 ("squashfs: extend "page actor" to handle missing pages")
Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk
Fixes: f268eedddf35 ("squashfs: extend "page actor" to handle missing pages")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
|
|
Since we actually know what error happened, we can report it instead
of having the generic code return -EIO for pages that were unlocked
without being marked uptodate. Also remove a test of PageError since
we have the return value at this point.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Add a function which can be used to read fragments in the readahead call.
This function is necessary because filesystems built with the -tailends
(or -always-use-fragments) option may have fragments present which cannot
be currently handled.
Link: https://lkml.kernel.org/r/20220617083810.337573-5-hsinyi@chromium.org
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Xiongwei Song <Xiongwei.Song@windriver.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement readahead callback for squashfs. It will read datablocks which
cover pages in readahead request. For a few cases it will not mark page
as uptodate, including:
- file end is 0.
- zero filled blocks.
- current batch of pages isn't in the same datablock.
- decompressor error.
Otherwise pages will be marked as uptodate. The unhandled pages will be
updated by readpage later.
Link: https://lkml.kernel.org/r/20220617083810.337573-4-hsinyi@chromium.org
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: Xiongwei Song <Xiongwei.Song@windriver.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Squashfs_readahead uses the "file direct" version of the page actor, and
so build it unconditionally.
Link: https://lkml.kernel.org/r/20220617083810.337573-3-hsinyi@chromium.org
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Hou Tao <houtao1@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Xiongwei Song <Xiongwei.Song@windriver.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Implement readahead for squashfs", v7.
Commit 9eec1d897139("squashfs: provide backing_dev_info in order to
disable read-ahead") mitigates the performance drop issue for squashfs by
closing readahead for it.
This series implements readahead callback for squashfs.
This patch (of 4):
This reverts 9eec1d897139e5 ("squashfs: provide backing_dev_info in order
to disable read-ahead").
Revert closing the readahead to squashfs since the readahead callback for
squashfs is implemented.
Link: https://lkml.kernel.org/r/20220617083810.337573-1-hsinyi@chromium.org
Link: https://lkml.kernel.org/r/20220617083810.337573-2-hsinyi@chromium.org
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Suggested-by: Xiongwei Song <Xiongwei.Song@windriver.com>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Zheng Liang <zhengliang6@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Hou Tao <houtao1@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the "page actor" can handle missing pages, we don't have to fall
back to using an intermediate buffer in Squashfs_readpage_block() if all
the pages necessary can't be obtained.
Link: https://lkml.kernel.org/r/20220611032133.5743-3-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Xiongwei Song <Xiongwei.Song@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Squashfs: handle missing pages decompressing into page
cache".
This patchset enables Squashfs to handle missing pages when directly
decompressing datablocks into the page cache.
Previously if the full set of pages needed was not available, Squashfs
would have to fall back to using an intermediate buffer (the older
method), which is slower, involving a memcopy, and it introduces
contention on a shared buffer.
The first patch extends the "page actor" code to handle missing pages.
The second patch updates Squashfs_readpage_block() to use the new
functionality, and removes the code that falls back to using an
intermediate buffer.
This patchset is independent of the readahead work, and it is standalone.
It can be merged on its own.
But the readahead patch for efficiency also needs this patch-set.
This patch (of 2):
This patch extends the "page actor" code to handle missing pages.
Previously if the full set of pages needed to decompress a Squashfs
datablock was unavailable, this would cause decompression to fail on the
missing pages.
In this case direct decompression into the page cache could not be
achieved and the code would fall back to using the older intermediate
buffer method.
With this patch, direct decompression into the page cache can be achieved
with missing pages.
For "multi-shot" decompressors (zlib, xz, zstd), the page actor will
allocate a temporary buffer which is passed to the decompressor, and then
freed by the page actor.
For "single shot" decompressors (lz4, lzo) which decompress into a
contiguous "bounce buffer", and which is then copied into the page cache,
it would be pointless to allocate a temporary buffer, memcpy into it, and
then free it. For these decompressors -ENOMEM is returned, which
signifies that the memcpy for that page should be skipped.
This also happens if the data block is uncompressed.
Link: https://lkml.kernel.org/r/20220611032133.5743-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20220611032133.5743-2-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Xiongwei Song <Xiongwei.Song@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Remove the magic autofree semantics and require the callers to explicitly
call bio_init to initialize the bio.
This allows bio_free to catch accidental bio_put calls on bio_init()ed
bios as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a plain kmalloc that is not backed by a mempool is safe here for a
large read (and the actual page allocations), it must also be for a
small one, so simplify the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220406061228.410163-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
