| Age | Commit message (Collapse) | Author |
|---|
|
A bug was found in the find_closest() (find_closest_descending() is also
affected after some testing), where for certain values with small
progressions, the rounding (done by averaging 2 values) causes an
incorrect index to be returned. The rounding issues occur for
progressions of 1, 2 and 3. It goes away when the progression/interval
between two values is 4 or larger.
It's particularly bad for progressions of 1. For example if there's an
array of 'a = { 1, 2, 3 }', using 'find_closest(2, a ...)' would return 0
(the index of '1'), rather than returning 1 (the index of '2'). This
means that for exact values (with a progression of 1), find_closest() will
misbehave and return the index of the value smaller than the one we're
searching for.
For progressions of 2 and 3, the exact values are obtained correctly; but
values aren't approximated correctly (as one would expect). Starting with
progressions of 4, all seems to be good (one gets what one would expect).
While one could argue that 'find_closest()' should not be used for arrays
with progressions of 1 (i.e. '{1, 2, 3, ...}', the macro should still
behave correctly.
The bug was found while testing the 'drivers/iio/adc/ad7606.c',
specifically the oversampling feature.
For reference, the oversampling values are listed as:
static const unsigned int ad7606_oversampling_avail[7] = {
1, 2, 4, 8, 16, 32, 64,
};
When doing:
1. $ echo 1 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is fine
2. $ echo 2 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is wrong; 2 should be returned here
3. $ echo 3 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
2 # this is fine
4. $ echo 4 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
4 # this is fine
And from here-on, the values are as correct (one gets what one would
expect.)
While writing a kunit test for this bug, a peculiar issue was found for the
array in the 'drivers/hwmon/ina2xx.c' & 'drivers/iio/adc/ina2xx-adc.c'
drivers. While running the kunit test (for 'ina226_avg_tab' from these
drivers):
* idx = find_closest([-1 to 2], ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, so value.
* idx = find_closest(3, ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, value 1; and now one could argue whether 3 is
closer to 4 or to 1. This quirk only appears for value '3' in this
array, but it seems to be a another rounding issue.
* And from 4 onwards the 'find_closest'() works fine (one gets what one
would expect).
This change reworks the find_closest() macros to also check the difference
between the left and right elements when 'x'. If the distance to the right
is smaller (than the distance to the left), the index is incremented by 1.
This also makes redundant the need for using the DIV_ROUND_CLOSEST() macro.
In order to accommodate for any mix of negative + positive values, the
internal variables '__fc_x', '__fc_mid_x', '__fc_left' & '__fc_right' are
forced to 'long' type. This also addresses any potential bugs/issues with
'x' being of an unsigned type. In those situations any comparison between
signed & unsigned would be promoted to a comparison between 2 unsigned
numbers; this is especially annoying when '__fc_left' & '__fc_right'
underflow.
The find_closest_descending() macro was also reworked and duplicated from
the find_closest(), and it is being iterated in reverse. The main reason
for this is to get the same indices as 'find_closest()' (but in reverse).
The comparison for '__fc_right < __fc_left' favors going the array in
ascending order.
For example for array '{ 1024, 512, 256, 128, 64, 16, 4, 1 }' and x = 3, we
get:
__fc_mid_x = 2
__fc_left = -1
__fc_right = -2
Then '__fc_right < __fc_left' evaluates to true and '__fc_i++' becomes 7
which is not quite incorrect, but 3 is closer to 4 than to 1.
This change has been validated with the kunit from the next patch.
Link: https://lkml.kernel.org/r/20241105145406.554365-1-aardelean@baylibre.com
Fixes: 95d119528b0b ("util_macros.h: add find_closest() macro")
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
|
|
The header is the direct user of definitions from the math.h, include it.
Link: https://lkml.kernel.org/r/20230103121937.32085-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit
b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
[1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/
Fixes: e80251555f0b ("tcp_bpf: Don't let child socket inherit parent protocol ops on copy")
Reported-by: syzbot+04c21ed96d861dccc5cd@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-2-1e0ee7ac2f90@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using the new find_closest() macro can result in the following sparse
warnings.
drivers/hwmon/lm85.c:194:16: warning:
incorrect type in initializer (different modifiers)
drivers/hwmon/lm85.c:194:16: expected int *__fc_a
drivers/hwmon/lm85.c:194:16: got int static const [toplevel] *<noident>
drivers/hwmon/lm85.c:210:16: warning:
incorrect type in initializer (different modifiers)
drivers/hwmon/lm85.c:210:16: expected int *__fc_a
drivers/hwmon/lm85.c:210:16: got int const *map
This is because the array passed to find_closest() will typically be
declared as array of constants, but the macro declares a non-constant
pointer to it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This series unduplicates the code used to find the member in an array
closest to 'x'.
The first patch adds a macro implementing the algorithm in two flavors -
for arrays sorted in ascending and descending order. The second updates
Documentation/CodingStyle on the naming convention for local variables in
macros resembling functions. Other three patches replace duplicated code
with calls to one of these macros in some hwmon drivers.
This patch (of 5):
Searching for the member of an array closest to 'x' is duplicated in
several places.
Add a new include - util_macros.h - and two macros that implement this
algorithm for arrays sorted both in ascending and descending order.
Uses linear search.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
