| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Move declaration of interface_lock outside of CONFIG_TIMERLAT_TRACER
The fix to some locking races moved the declaration of the
interface_lock up in the file, but also moved it into the
CONFIG_TIMERLAT_TRACER #ifdef block, breaking the build when that
wasn't set. Move it further up and out of that #ifdef block.
- Remove unused function run_tracer_selftest() stub
When CONFIG_FTRACE_STARTUP_TEST is not set the stub function
run_tracer_selftest() is not used and clang is warning about it.
Remove the function stub as it is not needed.
* tag 'trace-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Drop unused helper function to fix the build
tracing/osnoise: Fix build when timerlat is not enabled
|
|
sync_hw_clock() is normally called every 11 minutes when time is
synchronized. This issue is that this periodic timer uses the REALTIME
clock, so when time moves backwards (the NTP server jumps into the past),
the timer expires late.
If the timer expires late, which can be days later, the RTC will no longer
be updated, which is an issue if the device is abruptly powered OFF during
this period. When the device will restart (when powered ON), it will have
the date prior to the ADJ_SETOFFSET call.
A normal NTP server should not jump in the past like that, but it is
possible... Another way of reproducing this issue is to use phc2sys to
synchronize the REALTIME clock with, for example, an IRIG timecode with
the source always starting at the same date (not synchronized).
Also, if the time jump in the future by less than 11 minutes, the RTC may
not be updated immediately (minor issue). Consider the following scenario:
- Time is synchronized, and sync_hw_clock() was just called (the timer
expires in 11 minutes).
- A time jump is realized in the future by a couple of minutes.
- The time is synchronized again.
- Users may expect that RTC to be updated as soon as possible, and not
after 11 minutes (for the same reason, if a power loss occurs in this
period).
Cancel periodic timer on any time jump (ADJ_SETOFFSET) greater than or
equal to 1s. The timer will be relaunched at the end of do_adjtimex() if
NTP is still considered synced. Otherwise the timer will be relaunched
later when NTP is synced. This way, when the time is synchronized again,
the RTC is updated after less than 2 seconds.
Signed-off-by: Benjamin ROBIN <dev@benjarobin.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240908140836.203911-1-dev@benjarobin.fr
|
|
To update with the latest fixes.
|
|
CONFIG_DEBUG_RWSEMS
Both is_rwsem_reader_owned() and rwsem_owner() are currently only used when
CONFIG_DEBUG_RWSEMS is defined. This causes a compilation error with clang
when `make W=1` and CONFIG_WERROR=y:
kernel/locking/rwsem.c:187:20: error: unused function 'is_rwsem_reader_owned' [-Werror,-Wunused-function]
187 | static inline bool is_rwsem_reader_owned(struct rw_semaphore *sem)
| ^~~~~~~~~~~~~~~~~~~~~
kernel/locking/rwsem.c:271:35: error: unused function 'rwsem_owner' [-Werror,-Wunused-function]
271 | static inline struct task_struct *rwsem_owner(struct rw_semaphore *sem)
| ^~~~~~~~~~~
Fix this by moving these two functions under the CONFIG_DEBUG_RWSEMS define.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909182905.161156-1-longman@redhat.com
|
|
While commit 83ab38ef0a0b ("jump_label: Fix concurrency issues in
static_key_slow_dec()") fixed one problem, it created yet another,
notably the following is now possible:
slow_dec
if (try_dec) // dec_not_one-ish, false
// enabled == 1
slow_inc
if (inc_not_disabled) // inc_not_zero-ish
// enabled == 2
return
guard((mutex)(&jump_label_mutex);
if (atomic_cmpxchg(1,0)==1) // false, we're 2
slow_dec
if (try-dec) // dec_not_one, true
// enabled == 1
return
else
try_dec() // dec_not_one, false
WARN
Use dec_and_test instead of cmpxchg(), like it was prior to
83ab38ef0a0b. Add a few WARNs for the paranoid.
Fixes: 83ab38ef0a0b ("jump_label: Fix concurrency issues in static_key_slow_dec()")
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Usually, an event can be read from any CPU of the scope. It doesn't need
to be read from the advertised CPU.
Add a new event cap, PERF_EV_CAP_READ_SCOPE. An event of a PMU with
scope can be read from any active CPU in the scope.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-3-kan.liang@linux.intel.com
|
|
The perf subsystem assumes that the counters of a PMU are per-CPU. So
the user space tool reads a counter from each CPU in the system wide
mode. However, many PMUs don't have a per-CPU counter. The counter is
effective for a scope, e.g., a die or a socket. To address this, a
cpumask is exposed by the kernel driver to restrict to one CPU to stand
for a specific scope. In case the given CPU is removed,
the hotplug support has to be implemented for each such driver.
The codes to support the cpumask and hotplug are very similar.
- Expose a cpumask into sysfs
- Pickup another CPU in the same scope if the given CPU is removed.
- Invoke the perf_pmu_migrate_context() to migrate to a new CPU.
- In event init, always set the CPU in the cpumask to event->cpu
Similar duplicated codes are implemented for each such PMU driver. It
would be good to introduce a generic infrastructure to avoid such
duplication.
5 popular scopes are implemented here, core, die, cluster, pkg, and
the system-wide. The scope can be set when a PMU is registered. If so, a
"cpumask" is automatically exposed for the PMU.
The "cpumask" is from the perf_online_<scope>_mask, which is to track
the active CPU for each scope. They are set when the first CPU of the
scope is online via the generic perf hotplug support. When a
corresponding CPU is removed, the perf_online_<scope>_mask is updated
accordingly and the PMU will be moved to a new CPU from the same scope
if possible.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-2-kan.liang@linux.intel.com
|
|
The current runnable tasks output looks like:
runnable tasks:
S task PID tree-key switches prio wait-time sum-exec sum-sleep
-------------------------------------------------------------------------------------------------------------
Ikworker/R-rcu_g 4 0.129049 E 0.620179 0.750000 0.002920 2 100 0.000000 0.002920 0.000000 0.000000 0 0 /
Ikworker/R-sync_ 5 0.125328 E 0.624147 0.750000 0.001840 2 100 0.000000 0.001840 0.000000 0.000000 0 0 /
Ikworker/R-slub_ 6 0.120835 E 0.628680 0.750000 0.001800 2 100 0.000000 0.001800 0.000000 0.000000 0 0 /
Ikworker/R-netns 7 0.114294 E 0.634701 0.750000 0.002400 2 100 0.000000 0.002400 0.000000 0.000000 0 0 /
I kworker/0:1 9 508.781746 E 511.754666 3.000000 151.575240 224 120 0.000000 151.575240 0.000000 0.000000 0 0 /
Which is messy. Remove the duplicate printing of sum_exec_runtime and
tidy up the layout to make it look like:
runnable tasks:
S task PID vruntime eligible deadline slice sum-exec switches prio wait-time sum-sleep sum-block node group-id group-path
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I kworker/0:3 1698 295.001459 E 297.977619 3.000000 38.862920 9 120 0.000000 0.000000 0.000000 0 0 /
I kworker/0:4 1702 278.026303 E 281.026303 3.000000 9.918760 3 120 0.000000 0.000000 0.000000 0 0 /
S NetworkManager 2646 0.377936 E 2.598104 3.000000 98.535880 314 120 0.000000 0.000000 0.000000 0 0 /system.slice/NetworkManager.service
S virtqemud 2689 0.541016 E 2.440104 3.000000 50.967960 80 120 0.000000 0.000000 0.000000 0 0 /system.slice/virtqemud.service
S gsd-smartcard 3058 73.604144 E 76.475904 3.000000 74.033320 88 120 0.000000 0.000000 0.000000 0 0 /user.slice/user-42.slice/session-c1.scope
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240906053019.7874-1-shijie@os.amperecomputing.com
|
|
Completely analogous to commit dfa0a574cbc4 ("sched/uclamg: Handle
delayed dequeue"), avoid double dequeue for the sched_core entries.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Remove delayed tasks from util_est even they are runnable.
Exclude delayed task which are (a) migrating between rq's or (b) in a
SAVE/RESTORE dequeue/enqueue.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c49ef5fe-a909-43f1-b02f-a765ab9cedbf@arm.com
|
|
When analyzing a kernel waring message, Peter pointed out that there is a race
condition when the kworker is being frozen and falls into try_to_freeze() with
TASK_INTERRUPTIBLE, which could trigger a might_sleep() warning in try_to_freeze().
Although the root cause is not related to freeze()[1], it is still worthy to fix
this issue ahead.
One possible race scenario:
CPU 0 CPU 1
----- -----
// kthread_worker_fn
set_current_state(TASK_INTERRUPTIBLE);
suspend_freeze_processes()
freeze_processes
static_branch_inc(&freezer_active);
freeze_kernel_threads
pm_nosig_freezing = true;
if (work) { //false
__set_current_state(TASK_RUNNING);
} else if (!freezing(current)) //false, been frozen
freezing():
if (static_branch_unlikely(&freezer_active))
if (pm_nosig_freezing)
return true;
schedule()
}
// state is still TASK_INTERRUPTIBLE
try_to_freeze()
might_sleep() <--- warning
Fix this by explicitly set the TASK_RUNNING before entering
try_to_freeze().
Fixes: b56c0d8937e6 ("kthread: implement kthread_worker")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1]
|
|
commit 97450eb90965 ("sched/pelt: Remove shift of thermal clock")
removed the decay_shift for hw_pressure. This commit uses the
sched_clock_task() in sched_tick() while it replaces the
sched_clock_task() with rq_clock_pelt() in __update_blocked_others().
This could bring inconsistence. One possible scenario I can think of
is in ___update_load_sum():
u64 delta = now - sa->last_update_time
'now' could be calculated by rq_clock_pelt() from
__update_blocked_others(), and last_update_time was calculated by
rq_clock_task() previously from sched_tick(). Usually the former
chases after the latter, it cause a very large 'delta' and brings
unexpected behavior.
Fixes: 97450eb90965 ("sched/pelt: Remove shift of thermal clock")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20240827112607.181206-1-yu.c.chen@intel.com
|
|
Move effective_cpu_util() and sched_cpu_util() functions in fair.c file
with others utilization related functions.
No functional change.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240904092417.20660-1-vincent.guittot@linaro.org
|
|
Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") an idle CPU in TIF_POLLING_NRFLAG mode
can be pulled out of idle by setting TIF_NEED_RESCHED flag to service an
IPI without actually sending an interrupt. Even in cases where the IPI
handler does not queue a task on the idle CPU, do_idle() will call
__schedule() since need_resched() returns true in these cases.
Introduce and use SM_IDLE to identify call to __schedule() from
schedule_idle() and shorten the idle re-entry time by skipping
pick_next_task() when nr_running is 0 and the previous task is the idle
task.
With the SM_IDLE fast-path, the time taken to complete a fixed set of
IPIs using ipistorm improves noticeably. Following are the numbers
from a dual socket Intel Ice Lake Xeon server (2 x 32C/64T) and
3rd Generation AMD EPYC system (2 x 64C/128T) (boost on, C2 disabled)
running ipistorm between CPU8 and CPU16:
cmdline: insmod ipistorm.ko numipi=100000 single=1 offset=8 cpulist=8 wait=1
==================================================================
Test : ipistorm (modified)
Units : Normalized runtime
Interpretation: Lower is better
Statistic : AMean
======================= Intel Ice Lake Xeon ======================
kernel: time [pct imp]
tip:sched/core 1.00 [baseline]
tip:sched/core + SM_IDLE 0.80 [20.51%]
==================== 3rd Generation AMD EPYC =====================
kernel: time [pct imp]
tip:sched/core 1.00 [baseline]
tip:sched/core + SM_IDLE 0.90 [10.17%]
==================================================================
[ kprateek: Commit message, SM_RTLOCK_WAIT fix ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240809092240.6921-1-kprateek.nayak@amd.com
|
|
When debugging drivers, it can often be useful to trace when memory gets
(un)mapped for DMA (and can be accessed by the device). Add some
tracepoints for this purpose.
Use u64 instead of phys_addr_t and dma_addr_t (and similarly %llx instead
of %pa) because libtraceevent can't handle typedefs in all cases.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Let the kmemdup_array() take care about multiplication and possible
overflows.
Link: https://lkml.kernel.org/r/20240828072340.1249310-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Li zeming <zeming@nfschina.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Once a task is put into a DSQ, the allowed operations are fairly limited.
Tasks in the built-in local and global DSQs are executed automatically and,
ignoring dequeue, there is only one way a task in a user DSQ can be
manipulated - scx_bpf_consume() moves the first task to the dispatching
local DSQ. This inflexibility sometimes gets in the way and is an area where
multiple feature requests have been made.
Implement scx_bpf_dispatch[_vtime]_from_dsq(), which can be called during
DSQ iteration and can move the task to any DSQ - local DSQs, global DSQ and
user DSQs. The kfuncs can be called from ops.dispatch() and any BPF context
which dosen't hold a rq lock including BPF timers and SYSCALL programs.
This is an expansion of an earlier patch which only allowed moving into the
dispatching local DSQ:
http://lkml.kernel.org/r/Zn4Cw4FDTmvXnhaf@slm.duckdns.org
v2: Remove @slice and @vtime from scx_bpf_dispatch_from_dsq[_vtime]() as
they push scx_bpf_dispatch_from_dsq_vtime() over the kfunc argument
count limit and often won't be needed anyway. Instead provide
scx_bpf_dispatch_from_dsq_set_{slice|vtime}() kfuncs which can be called
only when needed and override the specified parameter for the subsequent
dispatch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: David Vernet <void@manifault.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
|
|
struct scx_iter_scx_dsq is defined as 6 u64's and scx_dsq_iter_kern was
using 5 of them. We want to add two more u64 fields but it's better if we do
so while staying within scx_iter_scx_dsq to maintain binary compatibility.
The way scx_iter_scx_dsq_kern is laid out is rather inefficient - the node
field takes up three u64's but only one bit of the last u64 is used. Turn
the bool into u32 flags and only use the lower 16 bits freeing up 48 bits -
16 bits for flags, 32 bits for a u32 - for use by struct
bpf_iter_scx_dsq_kern.
This allows moving the dsq_seq and flags fields of bpf_iter_scx_dsq_kern
into the cursor field reducing the struct size by a full u64.
No behavior changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
- Rename move_task_to_local_dsq() to move_remote_task_to_local_dsq().
- Rename consume_local_task() to move_local_task_to_local_dsq() and remove
task_unlink_from_dsq() and source DSQ unlocking from it.
This is to make the migration code easier to reuse.
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
So that the local case comes first and two CONFIG_SMP blocks can be merged.
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
All task_unlink_from_dsq() users are doing dsq_mod_nr(dsq, -1). Move it into
task_unlink_from_dsq(). Also move sanity check into it.
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
Reorder args for consistency in the order of:
current_rq, p, src_[rq|dsq], dst_[rq|dsq].
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Now that there's nothing left after the big if block, flip the if condition
and unindent the body.
No functional changes intended.
v2: Add BUG() to clarify control can't reach the end of
dispatch_to_local_dsq() in UP kernels per David.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
With the preceding update, the only return value which makes meaningful
difference is DTL_INVALID, for which one caller, finish_dispatch(), falls
back to the global DSQ and the other, process_ddsp_deferred_locals(),
doesn't do anything.
It should always fallback to the global DSQ. Move the global DSQ fallback
into dispatch_to_local_dsq() and remove the return value.
v2: Patch title and description updated to reflect the behavior fix for
process_ddsp_deferred_locals().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
find_dsq_for_dispatch() handles all DSQ IDs except SCX_DSQ_LOCAL_ON.
Instead, each caller is hanlding SCX_DSQ_LOCAL_ON before calling it. Move
SCX_DSQ_LOCAL_ON lookup into find_dsq_for_dispatch() to remove duplicate
code in direct_dispatch() and dispatch_to_local_dsq().
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
The tricky p->scx.holding_cpu handling was split across
consume_remote_task() body and move_task_to_local_dsq(). Refactor such that:
- All the tricky part is now in the new unlink_dsq_and_lock_src_rq() with
consolidated documentation.
- move_task_to_local_dsq() now implements straightforward task migration
making it easier to use in other places.
- dispatch_to_local_dsq() is another user move_task_to_local_dsq(). The
usage is updated accordingly. This makes the local and remote cases more
symmetric.
No functional changes intended.
v2: s/task_rq/src_rq/ for consistency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
Sleepables don't need to be in its own kfunc set as each is tagged with
KF_SLEEPABLE. Rename to scx_kfunc_set_unlocked indicating that rq lock is
not held and relocate right above the any set. This will be used to add
kfuncs that are allowed to be called from SYSCALL but not TRACING.
No functional changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
Patch series "Improve mem_cgroup_iter()", v4.
Incremental cgroup iteration is being used again [1]. This patchset
improves the reliability of mem_cgroup_iter(). It also improves
simplicity and code readability.
[1] https://lore.kernel.org/20240514202641.2821494-1-hannes@cmpxchg.org/
This patch (of 5):
Explicitly document that css sibling/descendant linkage is protected by
cgroup_mutex or RCU. Also, document in css_next_descendant_pre() and
similar functions that it isn't necessary to hold a ref on @pos.
The following changes in this patchset rely on this clarification for
simplification in memcg iteration code.
Link: https://lkml.kernel.org/r/20240905003058.1859929-1-kinseyho@google.com
Link: https://lkml.kernel.org/r/20240905003058.1859929-2-kinseyho@google.com
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following KASAN splat was shown:
[ 44.505448] ================================================================== 20:37:27 [3421/145075]
[ 44.505455] BUG: KASAN: slab-use-after-free in special_mapping_close+0x9c/0xc8
[ 44.505471] Read of size 8 at addr 00000000868dac48 by task sh/1384
[ 44.505479]
[ 44.505486] CPU: 51 UID: 0 PID: 1384 Comm: sh Not tainted 6.11.0-rc6-next-20240902-dirty #1496
[ 44.505503] Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
[ 44.505508] Call Trace:
[ 44.505511] [<000b0324d2f78080>] dump_stack_lvl+0xd0/0x108
[ 44.505521] [<000b0324d2f5435c>] print_address_description.constprop.0+0x34/0x2e0
[ 44.505529] [<000b0324d2f5464c>] print_report+0x44/0x138
[ 44.505536] [<000b0324d1383192>] kasan_report+0xc2/0x140
[ 44.505543] [<000b0324d2f52904>] special_mapping_close+0x9c/0xc8
[ 44.505550] [<000b0324d12c7978>] remove_vma+0x78/0x120
[ 44.505557] [<000b0324d128a2c6>] exit_mmap+0x326/0x750
[ 44.505563] [<000b0324d0ba655a>] __mmput+0x9a/0x370
[ 44.505570] [<000b0324d0bbfbe0>] exit_mm+0x240/0x340
[ 44.505575] [<000b0324d0bc0228>] do_exit+0x548/0xd70
[ 44.505580] [<000b0324d0bc1102>] do_group_exit+0x132/0x390
[ 44.505586] [<000b0324d0bc13b6>] __s390x_sys_exit_group+0x56/0x60
[ 44.505592] [<000b0324d0adcbd6>] do_syscall+0x2f6/0x430
[ 44.505599] [<000b0324d2f78434>] __do_syscall+0xa4/0x170
[ 44.505606] [<000b0324d2f9454c>] system_call+0x74/0x98
[ 44.505614]
[ 44.505616] Allocated by task 1384:
[ 44.505621] kasan_save_stack+0x40/0x70
[ 44.505630] kasan_save_track+0x28/0x40
[ 44.505636] __kasan_kmalloc+0xa0/0xc0
[ 44.505642] __create_xol_area+0xfa/0x410
[ 44.505648] get_xol_area+0xb0/0xf0
[ 44.505652] uprobe_notify_resume+0x27a/0x470
[ 44.505657] irqentry_exit_to_user_mode+0x15e/0x1d0
[ 44.505664] pgm_check_handler+0x122/0x170
[ 44.505670]
[ 44.505672] Freed by task 1384:
[ 44.505676] kasan_save_stack+0x40/0x70
[ 44.505682] kasan_save_track+0x28/0x40
[ 44.505687] kasan_save_free_info+0x4a/0x70
[ 44.505693] __kasan_slab_free+0x5a/0x70
[ 44.505698] kfree+0xe8/0x3f0
[ 44.505704] __mmput+0x20/0x370
[ 44.505709] exit_mm+0x240/0x340
[ 44.505713] do_exit+0x548/0xd70
[ 44.505718] do_group_exit+0x132/0x390
[ 44.505722] __s390x_sys_exit_group+0x56/0x60
[ 44.505727] do_syscall+0x2f6/0x430
[ 44.505732] __do_syscall+0xa4/0x170
[ 44.505738] system_call+0x74/0x98
The problem is that uprobe_clear_state() kfree's struct xol_area, which
contains struct vm_special_mapping *xol_mapping. This one is passed to
_install_special_mapping() in xol_add_vma().
__mput reads:
static inline void __mmput(struct mm_struct *mm)
{
VM_BUG_ON(atomic_read(&mm->mm_users));
uprobe_clear_state(mm);
exit_aio(mm);
ksm_exit(mm);
khugepaged_exit(mm); /* must run before exit_mmap */
exit_mmap(mm);
...
}
So uprobe_clear_state() in the beginning free's the memory area
containing the vm_special_mapping data, but exit_mmap() uses this
address later via vma->vm_private_data (which was set in
_install_special_mapping().
Fix this by moving uprobe_clear_state() to uprobes.c and use it as
close() callback.
[usama.anjum@collabora.com: remove unneeded condition]
Link: https://lkml.kernel.org/r/20240906101825.177490-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240903073629.2442754-1-svens@linux.ibm.com
Fixes: 223febc6e557 ("mm: add optional close() to struct vm_special_mapping")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
scx_dump_data is only used inside ext.c but doesn't have static. Add it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409070218.RB5WsQ07-lkp@intel.com/
|
|
When "arg#%d expected pointer to ctx, but got %s" error is printed, both
template parts actually point to the type of the argument, therefore, it
will also say "but got PTR", regardless of what was the actual register
type.
Fix the message to print the register type in the second part of the
template, change the existing test to adapt to the new format, and add a
new test to test the case when arg is a pointer to context, but reg is a
scalar.
Fixes: 00b85860feb8 ("bpf: Rewrite kfunc argument handling")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
|
|
A helper function defined but not used. This, in particular,
prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
kernel/trace/trace.c:2229:19: error: unused function 'run_tracer_selftest' [-Werror,-Wunused-function]
2229 | static inline int run_tracer_selftest(struct tracer *type)
| ^~~~~~~~~~~~~~~~~~~
Fix this by dropping unused functions.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/20240909105314.928302-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
To fix some critical section races, the interface_lock was added to a few
locations. One of those locations was above where the interface_lock was
declared, so the declaration was moved up before that usage.
Unfortunately, where it was placed was inside a CONFIG_TIMERLAT_TRACER
ifdef block. As the interface_lock is used outside that config, this broke
the build when CONFIG_OSNOISE_TRACER was enabled but
CONFIG_TIMERLAT_TRACER was not.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Helena Anna" <helena.anna.dubel@intel.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/20240909103231.23a289e2@gandalf.local.home
Fixes: e6a53481da29 ("tracing/timerlat: Only clear timer if a kthread exists")
Reported-by: "Bityutskiy, Artem" <artem.bityutskiy@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When building serial_base as a module, modpost fails with the following
error message:
ERROR: modpost: "match_devname_and_update_preferred_console"
[drivers/tty/serial/serial_base.ko] undefined!
Export the symbol to allow using it from modules.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409071312.qlwtTOS1-lkp@intel.com/
Fixes: 12c91cec3155 ("serial: core: Add serial_base_match_and_update_preferred_console()")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20240909075652.747370-1-liaoyu15@huawei.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
|
|
usleep_range() is a wrapper arount usleep_range_state() which hands in
TASK_UNTINTERRUPTIBLE as state argument.
Use already exising wrapper usleep_range(). No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-2-e98760256370@linutronix.de
|
|
next_expiry_recalc is the name of a function as well as the name of a
struct member of struct timer_base. This might lead to confusion.
Rename next_expiry_recalc() to timer_recalc_next_expiry(). No functional
change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-1-e98760256370@linutronix.de
|
|
'nocb.09.09.24a', 'rcutorture.14.08.24a', 'rcustall.09.09.24a', 'srcu.12.08.24a', 'rcu.tasks.14.08.24a', 'rcu_scaling_tests.15.08.24a', 'fixes.12.08.24a' and 'misc.11.08.24a' into next.09.09.24a
|
|
The rcu_dump_cpu_stacks() holds the leaf rcu_node structure's ->lock
when dumping the stakcks of any CPUs stalling the current grace period.
This lock is held to prevent confusion that would otherwise occur when
the stalled CPU reported its quiescent state (and then went on to do
unrelated things) just as the backtrace NMI was heading towards it.
This has worked well, but on larger systems has recently been observed
to cause severe lock contention resulting in CSD-lock stalls and other
general unhappiness.
This commit therefore does printk_deferred_enter() before acquiring
the lock and printk_deferred_exit() after releasing it, thus deferring
the overhead of actually outputting the stack trace out of that lock's
critical section.
Reported-by: Rik van Riel <riel@surriel.com>
Suggested-by: Rik van Riel <riel@surriel.com>
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Pre-GP accesses performed by the update side must be ordered against
post-GP accesses performed by the readers. This is ensured by the
bypass or nocb locking on enqueue time, followed by the fully ordered
rnp locking initiated while callbacks are accelerated, and then
propagated throughout the whole GP lifecyle associated with the
callbacks.
Therefore the explicit barrier advertizing ordering between bypass
enqueue and rcuo wakeup is superfluous. If anything, it would even only
order the first bypass callback enqueue against the rcuo wakeup and
ignore all the subsequent ones.
Remove the needless barrier.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
A callback enqueuer currently wakes up the rcuo kthread if it is adding
the first non-done callback of a CPU, whether the kthread is waiting on
a grace period or not (unless the CPU is offline).
This looks like a desired behaviour because then the rcuo kthread
doesn't wait for the end of the current grace period to handle the
callback. It is accelerated right away and assigned to the next grace
period. The GP kthread is notified about that fact and iterates with
the upcoming GP without sleeping in-between.
However this best-case scenario is contradicted by a few details,
depending on the situation:
1) If the callback is a non-bypass one queued with IRQs enabled, the
wake up only occurs if no other pending callbacks are on the list.
Therefore the theoretical "optimization" actually applies on rare
occasions.
2) If the callback is a non-bypass one queued with IRQs disabled, the
situation is similar with even more uncertainty due to the deferred
wake up.
3) If the callback is lazy, a few jiffies don't make any difference.
4) If the callback is bypass, the wake up timer is programmed 2 jiffies
ahead by rcuo in case the regular pending queue has been handled
in the meantime. The rare storm of callbacks can otherwise wait for
the currently elapsing grace period to be flushed and handled.
For all those reasons, the optimization is only theoretical and
occasional. Therefore it is reasonable that callbacks enqueuers only
wake up the rcuo kthread when it is not already waiting on a grace
period to complete.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
After a CPU is marked offline and until it reaches its final trip to
idle, rcuo has several opportunities to be woken up, either because
a callback has been queued in the meantime or because
rcutree_report_cpu_dead() has issued the final deferred NOCB wake up.
If RCU-boosting is enabled, RCU kthreads are set to SCHED_FIFO policy.
And if RT-bandwidth is enabled, the related hrtimer might be armed.
However this then happens after hrtimers have been migrated at the
CPUHP_AP_HRTIMERS_DYING stage, which is broken as reported by the
following warning:
Call trace:
enqueue_hrtimer+0x7c/0xf8
hrtimer_start_range_ns+0x2b8/0x300
enqueue_task_rt+0x298/0x3f0
enqueue_task+0x94/0x188
ttwu_do_activate+0xb4/0x27c
try_to_wake_up+0x2d8/0x79c
wake_up_process+0x18/0x28
__wake_nocb_gp+0x80/0x1a0
do_nocb_deferred_wakeup_common+0x3c/0xcc
rcu_report_dead+0x68/0x1ac
cpuhp_report_idle_dead+0x48/0x9c
do_idle+0x288/0x294
cpu_startup_entry+0x34/0x3c
secondary_start_kernel+0x138/0x158
Fix this with waking up rcuo using an IPI if necessary. Since the
existing API to deal with this situation only handles swait queue, rcuo
is only woken up from offline CPUs if it's not already waiting on a
grace period. In the worst case some callbacks will just wait for a
grace period to complete before being assigned to a subsequent one.
Reported-by: "Cheng-Jui Wang (王正睿)" <Cheng-Jui.Wang@mediatek.com>
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Now that the (de-)offloading process can only apply to offline CPUs,
there is no more concurrency between rcu_core and nocb kthreads. Also
the mutation now happens on empty queues.
Therefore the state machine can be reduced to a single bit called
SEGCBLIST_OFFLOADED. Simplify the transition as follows:
* Upon offloading: queue the rdp to be added to the rcuog list and
wait for the rcuog kthread to set the SEGCBLIST_OFFLOADED bit. Unpark
rcuo kthread.
* Upon de-offloading: Park rcuo kthread. Queue the rdp to be removed
from the rcuog list and wait for the rcuog kthread to clear the
SEGCBLIST_OFFLOADED bit.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix perf's AUX buffer serialization
- Prevent uninitialized struct members in perf's uprobes handling
* tag 'perf_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX buffer serialization
uprobes: Use kzalloc to allocate xol area
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids` and `cpumask_any_and(a, b) <
nr_cpu_ids` with the more readable `!cpumask_intersects(a, b)` and
`cpumask_intersects(a, b)`
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240906170142.1135207-1-costa.shul@redhat.com
|
|
scx_has_op[] is only used inside ext.c but doesn't have static. Add it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409062337.m7qqI88I-lkp@intel.com/
|
|
balance_scx()
pick_task_scx() must be preceded by balance_scx() but there currently is a
bug where fair could say yes on balance() but no on pick_task(), which then
ends up calling pick_task_scx() without preceding balance_scx(). Work around
by dropping WARN_ON_ONCE() and ignoring cases which don't make sense.
This isn't great and can theoretically lead to stalls. However, for
switch_all cases, this happens only while a BPF scheduler is being loaded or
unloaded, and, for partial cases, fair will likely keep triggering this CPU.
This will be reverted once the fair behavior is fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
static_call_module_notify() triggers a WARN_ON(), when memory allocation
fails in __static_call_add_module().
That's not really justified, because the failure case must be correctly
handled by the well known call chain and the error code is passed
through to the initiating userspace application.
A memory allocation fail is not a fatal problem, but the WARN_ON() takes
the machine out when panic_on_warn is set.
Replace it with a pr_warn().
Fixes: 9183c3f9ed71 ("static_call: Add inline static call infrastructure")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8734mf7pmb.ffs@tglx
|
|
Module insertion invokes static_call_add_module() to initialize the static
calls in a module. static_call_add_module() invokes __static_call_init(),
which allocates a struct static_call_mod to either encapsulate the built-in
static call sites of the associated key into it so further modules can be
added or to append the module to the module chain.
If that allocation fails the function returns with an error code and the
module core invokes static_call_del_module() to clean up eventually added
static_call_mod entries.
This works correctly, when all keys used by the module were converted over
to a module chain before the failure. If not then static_call_del_module()
causes a #GP as it blindly assumes that key::mods points to a valid struct
static_call_mod.
The problem is that key::mods is not a individual struct member of struct
static_call_key, it's part of a union to save space:
union {
/* bit 0: 0 = mods, 1 = sites */
unsigned long type;
struct static_call_mod *mods;
struct static_call_site *sites;
};
key::sites is a pointer to the list of built-in usage sites of the static
call. The type of the pointer is differentiated by bit 0. A mods pointer
has the bit clear, the sites pointer has the bit set.
As static_call_del_module() blidly assumes that the pointer is a valid
static_call_mod type, it fails to check for this failure case and
dereferences the pointer to the list of built-in call sites, which is
obviously bogus.
Cure it by checking whether the key has a sites or a mods pointer.
If it's a sites pointer then the key is not to be touched. As the sites are
walked in the same order as in __static_call_init() the site walk can be
terminated because all subsequent sites have not been touched by the init
code due to the error exit.
If it was converted before the allocation fail, then the inner loop which
searches for a module match will find nothing.
A fail in the second allocation in __static_call_init() is harmless and
does not require special treatment. The first allocation succeeded and
converted the key to a module chain. That first entry has mod::mod == NULL
and mod::next == NULL, so the inner loop of static_call_del_module() will
neither find a module match nor a module chain. The next site in the walk
was either already converted, but can't match the module, or it will exit
the outer loop because it has a static_call_site pointer and not a
static_call_mod pointer.
Fixes: 9183c3f9ed71 ("static_call: Add inline static call infrastructure")
Closes: https://lore.kernel.org/all/20230915082126.4187913-1-ruanjinjie@huawei.com
Reported-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/87zfon6b0s.ffs@tglx
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids`
with the more readable `!cpumask_intersects(a, b)`.
[ tglx: Massaged change log ]
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/all/20240904134823.777623-2-costa.shul@redhat.com
|
