| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove wrong enqueueing of a task for a later wakeup when a task
blocks on a RT mutex
- Do not setup a new deadline entity on a boosted task as that has
happened already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and
avoid unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in
nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the
warning to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity
no longer a subset of the cpuset
* tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex
sched/deadline: Fix warning in migrate_enable for boosted tasks
sched/core: Update kernel boot parameters for LAZY preempt.
sched/core: Prevent wakeup of ksoftirqd during idle load balance
sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy
sched/core: Remove the unnecessary need_resched() check in nohz_csd_func()
softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel
sched: fix warning in sched_setaffinity
sched/deadline: Fix replenish_dl_new_period dl_server condition
|
|
The powerpc user access code is special, and unlike other architectures
distinguishes between user access for reading and writing.
And commit 43a43faf5376 ("futex: improve user space accesses") messed
that up. It went undetected elsewhere, but caused ppc32 to fail early
during boot, because the user access had been started with
user_read_access_begin(), but then finished off with just a plain
"user_access_end()".
Note that the address-masking user access helpers don't even have that
read-vs-write distinction, so if powerpc ever wants to do address
masking tricks, we'll have to do some extra work for it.
[ Make sure to also do it for the EFAULT case, as pointed out by
Christophe Leroy ]
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/87bjxl6b0i.fsf@igel.home/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a /proc/interrupts formatting regression
- Have the BCM2836 interrupt controller enter power management states
properly
- Other fixlets
* tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
genirq/proc: Add missing space separator back
irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v3: Fix irq_complete_ack() comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle the case where clocksources with small counter width can,
in conjunction with overly long idle sleeps, falsely trigger the
negative motion detection of clocksources
* tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Make negative motion detection more robust
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
|
|
Pull bpf fixes from Daniel Borkmann::
- Fix several issues for BPF LPM trie map which were found by syzbot
and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the BPF
verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when interacting
with the BPF stack without CAP_PERFMON (Kumar Kartikeya Dwivedi,
Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of xsk map
as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge after
sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check in poll
and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined but
empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm symbols
(Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (31 commits)
selftests/bpf: Add more test cases for LPM trie
selftests/bpf: Move test_lpm_map.c to map_tests
bpf: Use raw_spinlock_t for LPM trie
bpf: Switch to bpf mem allocator for LPM trie
bpf: Fix exact match conditions in trie_get_next_key()
bpf: Handle in-place update for full LPM trie correctly
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
bpf: Remove unnecessary kfree(im_node) in lpm_trie_update_elem
bpf: Remove unnecessary check when updating LPM trie
selftests/bpf: Add test for narrow spill into 64-bit spilled scalar
selftests/bpf: Add test for reading from STACK_INVALID slots
selftests/bpf: Introduce __caps_unpriv annotation for tests
bpf: Fix narrow scalar spill onto 64-bit spilled scalar slots
bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_misc
samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS
bpf: Zero index arg error string for dynptr and iter
selftests/bpf: Add tests for iter arg check
bpf: Ensure reg is PTR_TO_STACK in process_iter_arg
tools: Override makefile ARCH variable if defined, but empty
selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap
...
|
|
After switching from kmalloc() to the bpf memory allocator, there will be
no blocking operation during the update of LPM trie. Therefore, change
trie->lock from spinlock_t to raw_spinlock_t to make LPM trie usable in
atomic context, even on RT kernels.
The max value of prefixlen is 2048. Therefore, update or deletion
operations will find the target after at most 2048 comparisons.
Constructing a test case which updates an element after 2048 comparisons
under a 8 CPU VM, and the average time and the maximal time for such
update operation is about 210us and 900us.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Multiple syzbot warnings have been reported. These warnings are mainly
about the lock order between trie->lock and kmalloc()'s internal lock.
See report [1] as an example:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7-syzkaller-00003-g4376e966ecb7 #0 Not tainted
------------------------------------------------------
syz.3.2069/15008 is trying to acquire lock:
ffff88801544e6d8 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node ...
but task is already holding lock:
ffff88802dcc89f8 (&trie->lock){-.-.}-{2:2}, at: trie_update_elem ...
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&trie->lock){-.-.}-{2:2}:
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x3a/0x60
trie_delete_elem+0xb0/0x820
___bpf_prog_run+0x3e51/0xabd0
__bpf_prog_run32+0xc1/0x100
bpf_dispatcher_nop_func
......
bpf_trace_run2+0x231/0x590
__bpf_trace_contention_end+0xca/0x110
trace_contention_end.constprop.0+0xea/0x170
__pv_queued_spin_lock_slowpath+0x28e/0xcc0
pv_queued_spin_lock_slowpath
queued_spin_lock_slowpath
queued_spin_lock
do_raw_spin_lock+0x210/0x2c0
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x42/0x60
__put_partials+0xc3/0x170
qlink_free
qlist_free_all+0x4e/0x140
kasan_quarantine_reduce+0x192/0x1e0
__kasan_slab_alloc+0x69/0x90
kasan_slab_alloc
slab_post_alloc_hook
slab_alloc_node
kmem_cache_alloc_node_noprof+0x153/0x310
__alloc_skb+0x2b1/0x380
......
-> #0 (&n->list_lock){-.-.}-{2:2}:
check_prev_add
check_prevs_add
validate_chain
__lock_acquire+0x2478/0x3b30
lock_acquire
lock_acquire+0x1b1/0x560
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x3a/0x60
get_partial_node.part.0+0x20/0x350
get_partial_node
get_partial
___slab_alloc+0x65b/0x1870
__slab_alloc.constprop.0+0x56/0xb0
__slab_alloc_node
slab_alloc_node
__do_kmalloc_node
__kmalloc_node_noprof+0x35c/0x440
kmalloc_node_noprof
bpf_map_kmalloc_node+0x98/0x4a0
lpm_trie_node_alloc
trie_update_elem+0x1ef/0xe00
bpf_map_update_value+0x2c1/0x6c0
map_update_elem+0x623/0x910
__sys_bpf+0x90c/0x49a0
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&trie->lock);
lock(&n->list_lock);
lock(&trie->lock);
lock(&n->list_lock);
*** DEADLOCK ***
[1]: https://syzkaller.appspot.com/bug?extid=9045c0a3d5a7f1b119f7
A bpf program attached to trace_contention_end() triggers after
acquiring &n->list_lock. The program invokes trie_delete_elem(), which
then acquires trie->lock. However, it is possible that another
process is invoking trie_update_elem(). trie_update_elem() will acquire
trie->lock first, then invoke kmalloc_node(). kmalloc_node() may invoke
get_partial_node() and try to acquire &n->list_lock (not necessarily the
same lock object). Therefore, lockdep warns about the circular locking
dependency.
Invoking kmalloc() before acquiring trie->lock could fix the warning.
However, since BPF programs call be invoked from any context (e.g.,
through kprobe/tracepoint/fentry), there may still be lock ordering
problems for internal locks in kmalloc() or trie->lock itself.
To eliminate these potential lock ordering problems with kmalloc()'s
internal locks, replacing kmalloc()/kfree()/kfree_rcu() with equivalent
BPF memory allocator APIs that can be invoked in any context. The lock
ordering problems with trie->lock (e.g., reentrance) will be handled
separately.
Three aspects of this change require explanation:
1. Intermediate and leaf nodes are allocated from the same allocator.
Since the value size of LPM trie is usually small, using a single
alocator reduces the memory overhead of the BPF memory allocator.
2. Leaf nodes are allocated before disabling IRQs. This handles cases
where leaf_size is large (e.g., > 4KB - 8) and updates require
intermediate node allocation. If leaf nodes were allocated in
IRQ-disabled region, the free objects in BPF memory allocator would not
be refilled timely and the intermediate node allocation may fail.
3. Paired migrate_{disable|enable}() calls for node alloc and free. The
BPF memory allocator uses per-CPU struct internally, these paired calls
are necessary to guarantee correctness.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
trie_get_next_key() uses node->prefixlen == key->prefixlen to identify
an exact match, However, it is incorrect because when the target key
doesn't fully match the found node (e.g., node->prefixlen != matchlen),
these two nodes may also have the same prefixlen. It will return
expected result when the passed key exist in the trie. However when a
recently-deleted key or nonexistent key is passed to
trie_get_next_key(), it may skip keys and return incorrect result.
Fix it by using node->prefixlen == matchlen to identify exact matches.
When the condition is true after the search, it also implies
node->prefixlen equals key->prefixlen, otherwise, the search would
return NULL instead.
Fixes: b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When a LPM trie is full, in-place updates of existing elements
incorrectly return -ENOSPC.
Fix this by deferring the check of trie->n_entries. For new insertions,
n_entries must not exceed max_entries. However, in-place updates are
allowed even when the trie is full.
Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the currently missing handling for the BPF_EXIST and BPF_NOEXIST
flags. These flags can be specified by users and are relevant since LPM
trie supports exact matches during update.
Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is no need to call kfree(im_node) when updating element fails,
because im_node must be NULL. Remove the unnecessary kfree() for
im_node.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When "node->prefixlen == matchlen" is true, it means that the node is
fully matched. If "node->prefixlen == key->prefixlen" is false, it means
the prefix length of key is greater than the prefix length of node,
otherwise, matchlen will not be equal with node->prefixlen. However, it
also implies that the prefix length of node must be less than
max_prefixlen.
Therefore, "node->prefixlen == trie->max_prefixlen" will always be false
when the check of "node->prefixlen == key->prefixlen" returns false.
Remove this unnecessary comparison.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
[Problem Description]
When running the hackbench program of LTP, the following memory leak is
reported by kmemleak.
# /opt/ltp/testcases/bin/hackbench 20 thread 1000
Running with 20*40 (== 800) tasks.
# dmesg | grep kmemleak
...
kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888cd8ca2c40 (size 64):
comm "hackbench", pid 17142, jiffies 4299780315
hex dump (first 32 bytes):
ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc bff18fd4):
[<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0
[<ffffffff8113f715>] task_numa_work+0x725/0xa00
[<ffffffff8110f878>] task_work_run+0x58/0x90
[<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0
[<ffffffff81dd78d5>] do_syscall_64+0x85/0x150
[<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
This issue can be consistently reproduced on three different servers:
* a 448-core server
* a 256-core server
* a 192-core server
[Root Cause]
Since multiple threads are created by the hackbench program (along with
the command argument 'thread'), a shared vma might be accessed by two or
more cores simultaneously. When two or more cores observe that
vma->numab_state is NULL at the same time, vma->numab_state will be
overwritten.
Although current code ensures that only one thread scans the VMAs in a
single 'numa_scan_period', there might be a chance for another thread
to enter in the next 'numa_scan_period' while we have not gotten till
numab_state allocation [1].
Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000`
cannot the reproduce the issue. It is verified with 200+ test runs.
[Solution]
Use the cmpxchg atomic operation to ensure that only one thread executes
the vma->numab_state assignment.
[1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/
Link: https://lkml.kernel.org/r/20241113102146.2384-1-ahuang12@lenovo.com
Fixes: ef6a22b70f6d ("sched/numa: apply the scan delay to every new vma")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit build problem workaround from Paul Moore:
"A minor audit patch that shuffles some code slightly to workaround a
GCC bug affecting a number of people.
The GCC folks have been able to reproduce the problem and are
discussing solutions (see the bug report link in the commit), but
since the workaround is trivial let's do that in the kernel so we can
unblock people who are hitting this"
* tag 'audit-pr-20241205' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: workaround a GCC bug triggered by task comm changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix trace histogram sort function cmp_entries_dup()
The sort function cmp_entries_dup() returns either 1 or 0, and not -1
if parameter "a" is less than "b" by memcmp().
- Fix archs that call trace_hardirqs_off() without RCU watching
Both x86 and arm64 no longer call any tracepoints with RCU not
watching. It was assumed that it was safe to get rid of
trace_*_rcuidle() version of the tracepoint calls. This was needed to
get rid of the SRCU protection and be able to implement features like
faultable traceponits and add rust tracepoints.
Unfortunately, there were a few architectures that still relied on
that logic. There's only one file that has tracepoints that are
called without RCU watching. Add macro logic around the tracepoints
for architectures that do not have CONFIG_ARCH_WANTS_NO_INSTR defined
will check if the code is in the idle path (the only place RCU isn't
watching), and enable RCU around calling the tracepoint, but only do
it if the tracepoint is enabled.
* tag 'trace-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix archs that still call tracepoints without RCU watching
tracing: Fix cmp_entries_dup() to respect sort() comparison rules
|
|
Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a
24-bit wide clocksource.
It turns out that the calculated maximal idle time, which limits idle
sleeps to prevent clocksource wrap arounds, is close to the point where the
negative motion detection triggers.
max_idle_ns: 597268854 ns
negative motion tripping point: 671088640 ns
If the idle wakeup is delayed beyond that point, the clocksource
advances far enough to trigger the negative motion detection. This
prevents the clock to advance and in the worst case the system stalls
completely if the consecutive sleeps based on the stale clock are
delayed as well.
Cure this by calculating a more robust cut-off value for negative motion,
which covers 87.5% of the actual clocksource counter width. Compare the
delta against this value to catch negative motion. This is specifically for
clock sources with a small counter width as their wrap around time is close
to the half counter width. For clock sources with wide counters this is not
a problem because the maximum idle time is far from the half counter width
due to the math overflow protection constraints.
For the case at hand this results in a tripping point of 1174405120ns.
Note, that this cannot prevent issues when the delay exceeds the 87.5%
margin, but that's not different from the previous unchecked version which
allowed arbitrary time jumps.
Systems with small counter width are prone to invalid results, but this
problem is unlikely to be seen on real hardware. If such a system
completely stalls for more than half a second, then there are other more
urgent problems than the counter wrapping around.
Fixes: c163e40af9b2 ("timekeeping: Always check for negative motion")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx
Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.net
|
|
Tracepoints require having RCU "watching" as it uses RCU to do updates to
the tracepoints. There are some cases that would call a tracepoint when
RCU was not "watching". This was usually in the idle path where RCU has
"shutdown". For the few locations that had tracepoints without RCU
watching, there was an trace_*_rcuidle() variant that could be used. This
used SRCU for protection.
There are tracepoints that trace when interrupts and preemption are
enabled and disabled. In some architectures, these tracepoints are called
in a path where RCU is not watching. When x86 and arm64 removed these
locations, it was incorrectly assumed that it would be safe to remove the
trace_*_rcuidle() variant and also remove the SRCU logic, as it made the
code more complex and harder to implement new tracepoint features (like
faultable tracepoints and tracepoints in rust).
Instead of bringing back the trace_*_rcuidle(), as it will not be trivial
to do as new code has already been added depending on its removal, add a
workaround to the one file that still requires it (trace_preemptirq.c). If
the architecture does not define CONFIG_ARCH_WANTS_NO_INSTR, then check if
the code is in the idle path, and if so, call ct_irq_enter/exit() which
will enable RCU around the tracepoint.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20241204100414.4d3e06d0@gandalf.local.home
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 48bcda684823 ("tracing: Remove definition of trace_*_rcuidle()")
Closes: https://lore.kernel.org/all/bddb02de-957a-4df5-8e77-829f55728ea2@roeck-us.net/
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A build failure has been reported with the following details:
In file included from include/linux/string.h:390,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/spinlock.h:63,
from include/linux/wait.h:9,
from include/linux/wait_bit.h:8,
from include/linux/fs.h:6,
from kernel/auditsc.c:37:
In function 'sized_strscpy',
inlined from '__audit_ptrace' at kernel/auditsc.c:2732:2:
>> include/linux/fortify-string.h:293:17:
error: call to '__write_overflow' declared with attribute error:
detected write beyond size of object (1st parameter)
293 | __write_overflow();
| ^~~~~~~~~~~~~~~~~~
In function 'sized_strscpy',
inlined from 'audit_signal_info_syscall' at kernel/auditsc.c:2759:3:
>> include/linux/fortify-string.h:293:17:
error: call to '__write_overflow' declared with attribute error:
detected write beyond size of object (1st parameter)
293 | __write_overflow();
| ^~~~~~~~~~~~~~~~~~
The issue appears to be a GCC bug, though the root cause remains
unclear at this time. For now, let's implement a workaround.
A bug report has also been filed with GCC [0].
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117912 [0]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410171420.1V00ICVG-lkp@intel.com/
Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20241128182435.57a1ea6f@gandalf.local.home/
Reported-by: Zhuo, Qiuxu <qiuxu.zhuo@intel.com>
Closes: https://lore.kernel.org/all/CY8PR11MB71348E568DBDA576F17DAFF389362@CY8PR11MB7134.namprd11.prod.outlook.com/
Originally-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/linux-hardening/202410171059.C2C395030@keescook/
Signed-off-by: Yafang shao <laoar.shao@gmail.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
[PM: subject tweak, description line wrapping]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When CAP_PERFMON and CAP_SYS_ADMIN (allow_ptr_leaks) are disabled, the
verifier aims to reject partial overwrite on an 8-byte stack slot that
contains a spilled pointer.
However, in such a scenario, it rejects all partial stack overwrites as
long as the targeted stack slot is a spilled register, because it does
not check if the stack slot is a spilled pointer.
Incomplete checks will result in the rejection of valid programs, which
spill narrower scalar values onto scalar slots, as shown below.
0: R1=ctx() R10=fp0
; asm volatile ( @ repro.bpf.c:679
0: (7a) *(u64 *)(r10 -8) = 1 ; R10=fp0 fp-8_w=1
1: (62) *(u32 *)(r10 -8) = 1
attempt to corrupt spilled pointer on stack
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0.
Fix this by expanding the check to not consider spilled scalar registers
when rejecting the write into the stack.
Previous discussion on this patch is at link [0].
[0]: https://lore.kernel.org/bpf/20240403202409.2615469-1-tao.lyu@epfl.ch
Fixes: ab125ed3ec1c ("bpf: fix check for attempt to corrupt spilled pointer")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Inside mark_stack_slot_misc, we should not upgrade STACK_INVALID to
STACK_MISC when allow_ptr_leaks is false, since invalid contents
shouldn't be read unless the program has the relevant capabilities.
The relaxation only makes sense when env->allow_ptr_leaks is true.
However, such conversion in privileged mode becomes unnecessary, as
invalid slots can be read without being upgraded to STACK_MISC.
Currently, the condition is inverted (i.e. checking for true instead of
false), simply remove it to restore correct behavior.
Fixes: eaf18febd6eb ("bpf: preserve STACK_ZERO slots on partial reg spills")
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reported-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cmp_entries_dup() function used as the comparator for sort()
violated the symmetry and transitivity properties required by the
sorting algorithm. Specifically, it returned 1 whenever memcmp() was
non-zero, which broke the following expectations:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
These violations could lead to incorrect sorting and failure to
correctly identify duplicate elements.
Fix the issue by directly returning the result of memcmp(), which
adheres to the required comparison properties.
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa063 ("tracing: Add lock-free tracing_map")
Link: https://lore.kernel.org/20241203202228.1274403-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The recent conversion of show_interrupts() to seq_put_decimal_ull_width()
caused a formatting regression as it drops a previosuly existing space
separator.
Add it back by unconditionally inserting a space after the interrupt
counts and removing the extra leading space from the chip name prints.
Fixes: f9ed1f7c2e26 ("genirq/proc: Use seq_put_decimal_ull_width() for decimal values")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/all/87zfldt5g4.ffs@tglx
Closes: https://lore.kernel.org/all/4ce18851-6e9f-bbe-8319-cc5e69fb45c@linux-m68k.org
|
|
Andrii spotted that process_dynptr_func's rejection of incorrect
argument register type will print an error string where argument numbers
are not zero-indexed, unlike elsewhere in the verifier. Fix this by
subtracting 1 from regno. The same scenario exists for iterator
messages. Fix selftest error strings that match on the exact argument
number while we're at it to ensure clean bisection.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203002235.3776418-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes: 06accc8779c1 ("bpf: add support for open-coded iterator loops")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
[ Kartikeya: move check into process_iter_arg, rewrite commit log ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Anders had bisected a crash using PREEMPT_RT with linux-next and
isolated it down to commit 894d1b3db41c ("locking/mutex: Remove
wakeups from under mutex::wait_lock"), where it seemed the
wake_q structure was somehow getting corrupted causing a null
pointer traversal.
I was able to easily repoduce this with PREEMPT_RT and managed
to isolate down that through various call stacks we were
actually calling wake_up_q() twice on the same wake_q.
I found that in the problematic commit, I had added the
wake_up_q() call in task_blocks_on_rt_mutex() around
__ww_mutex_add_waiter(), following a similar pattern in
__mutex_lock_common().
However, its just wrong. We haven't dropped the lock->wait_lock,
so its contrary to the point of the original patch. And it
didn't match the __mutex_lock_common() logic of re-initializing
the wake_q after calling it midway in the stack.
Looking at it now, the wake_up_q() call is incorrect and should
just be removed. So drop the erronious logic I had added.
Fixes: 894d1b3db41c ("locking/mutex: Remove wakeups from under mutex::wait_lock")
Closes: https://lore.kernel.org/lkml/6afb936f-17c7-43fa-90e0-b9e780866097@app.fastmail.com/
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20241114190051.552665-1-jstultz@google.com
|
|
When running the following command:
while true; do
stress-ng --cyclic 30 --timeout 30s --minimize --quiet
done
a warning is eventually triggered:
WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794
setup_new_dl_entity+0x13e/0x180
...
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? enqueue_dl_entity+0x631/0x6e0
? setup_new_dl_entity+0x13e/0x180
? __warn+0x7e/0xd0
? report_bug+0x11a/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
enqueue_dl_entity+0x631/0x6e0
enqueue_task_dl+0x7d/0x120
__do_set_cpus_allowed+0xe3/0x280
__set_cpus_allowed_ptr_locked+0x140/0x1d0
__set_cpus_allowed_ptr+0x54/0xa0
migrate_enable+0x7e/0x150
rt_spin_unlock+0x1c/0x90
group_send_sig_info+0xf7/0x1a0
? kill_pid_info+0x1f/0x1d0
kill_pid_info+0x78/0x1d0
kill_proc_info+0x5b/0x110
__x64_sys_kill+0x93/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f0dab31f92b
This warning occurs because set_cpus_allowed dequeues and enqueues tasks
with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning
is triggered. A boosted task already had its parameters set by
rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary,
hence the WARN_ON call.
Check if we are requeueing a boosted task and avoid calling
setup_new_dl_entity if that's the case.
Fixes: 295d6d5e3736 ("sched/deadline: Fix switching to -deadline")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20240724142253.27145-2-wander@redhat.com
|
|
Scheduler raises a SCHED_SOFTIRQ to trigger a load balancing event on
from the IPI handler on the idle CPU. If the SMP function is invoked
from an idle CPU via flush_smp_call_function_queue() then the HARD-IRQ
flag is not set and raise_softirq_irqoff() needlessly wakes ksoftirqd
because soft interrupts are handled before ksoftirqd get on the CPU.
Adding a trace_printk() in nohz_csd_func() at the spot of raising
SCHED_SOFTIRQ and enabling trace events for sched_switch, sched_wakeup,
and softirq_entry (for SCHED_SOFTIRQ vector alone) helps observing the
current behavior:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ from nohz_csd_func
<idle>-0 [000] dN.4.: sched_wakeup: comm=ksoftirqd/0 pid=16 prio=120 target_cpu=000
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_exit: vec=7 [action=SCHED]
<idle>-0 [000] d..2.: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/0 next_pid=16 next_prio=120
ksoftirqd/0-16 [000] d..2.: sched_switch: prev_comm=ksoftirqd/0 prev_pid=16 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120
...
Use __raise_softirq_irqoff() to raise the softirq. The SMP function call
is always invoked on the requested CPU in an interrupt handler. It is
guaranteed that soft interrupts are handled at the end.
Following are the observations with the changes when enabling the same
set of events:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ for nohz_idle_balance
<idle>-0 [000] dN.1.: softirq_raise: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
No unnecessary ksoftirqd wakeups are seen from idle task's context to
service the softirq.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Closes: https://lore.kernel.org/lkml/fcf823f-195e-6c9a-eac3-25f870cb35ac@inria.fr/ [1]
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241119054432.6405-5-kprateek.nayak@amd.com
|
|
busy
Commit b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
optimizes IPIs to idle CPUs in TIF_POLLING_NRFLAG mode by setting the
TIF_NEED_RESCHED flag in idle task's thread info and relying on
flush_smp_call_function_queue() in idle exit path to run the
call-function. A softirq raised by the call-function is handled shortly
after in do_softirq_post_smp_call_flush() but the TIF_NEED_RESCHED flag
remains set and is only cleared later when schedule_idle() calls
__schedule().
need_resched() check in _nohz_idle_balance() exists to bail out of load
balancing if another task has woken up on the CPU currently in-charge of
idle load balancing which is being processed in SCHED_SOFTIRQ context.
Since the optimization mentioned above overloads the interpretation of
TIF_NEED_RESCHED, check for idle_cpu() before going with the existing
need_resched() check which can catch a genuine task wakeup on an idle
CPU processing SCHED_SOFTIRQ from do_softirq_post_smp_call_flush(), as
well as the case where ksoftirqd needs to be preempted as a result of
new task wakeup or slice expiry.
In case of PREEMPT_RT or threadirqs, although the idle load balancing
may be inhibited in some cases on the ilb CPU, the fact that ksoftirqd
is the only fair task going back to sleep will trigger a newidle balance
on the CPU which will alleviate some imbalance if it exists if idle
balance fails to do so.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-4-kprateek.nayak@amd.com
|
|
The need_resched() check currently in nohz_csd_func() can be tracked
to have been added in scheduler_ipi() back in 2011 via commit
ca38062e57e9 ("sched: Use resched IPI to kick off the nohz idle balance")
Since then, it has travelled quite a bit but it seems like an idle_cpu()
check currently is sufficient to detect the need to bail out from an
idle load balancing. To justify this removal, consider all the following
case where an idle load balancing could race with a task wakeup:
o Since commit f3dd3f674555b ("sched: Remove the limitation of WF_ON_CPU
on wakelist if wakee cpu is idle") a target perceived to be idle
(target_rq->nr_running == 0) will return true for
ttwu_queue_cond(target) which will offload the task wakeup to the idle
target via an IPI.
In all such cases target_rq->ttwu_pending will be set to 1 before
queuing the wake function.
If an idle load balance races here, following scenarios are possible:
- The CPU is not in TIF_POLLING_NRFLAG mode in which case an actual
IPI is sent to the CPU to wake it out of idle. If the
nohz_csd_func() queues before sched_ttwu_pending(), the idle load
balance will bail out since idle_cpu(target) returns 0 since
target_rq->ttwu_pending is 1. If the nohz_csd_func() is queued after
sched_ttwu_pending() it should see rq->nr_running to be non-zero and
bail out of idle load balancing.
- The CPU is in TIF_POLLING_NRFLAG mode and instead of an actual IPI,
the sender will simply set TIF_NEED_RESCHED for the target to put it
out of idle and flush_smp_call_function_queue() in do_idle() will
execute the call function. Depending on the ordering of the queuing
of nohz_csd_func() and sched_ttwu_pending(), the idle_cpu() check in
nohz_csd_func() should either see target_rq->ttwu_pending = 1 or
target_rq->nr_running to be non-zero if there is a genuine task
wakeup racing with the idle load balance kick.
o The waker CPU perceives the target CPU to be busy
(targer_rq->nr_running != 0) but the CPU is in fact going idle and due
to a series of unfortunate events, the system reaches a case where the
waker CPU decides to perform the wakeup by itself in ttwu_queue() on
the target CPU but target is concurrently selected for idle load
balance (XXX: Can this happen? I'm not sure, but we'll consider the
mother of all coincidences to estimate the worst case scenario).
ttwu_do_activate() calls enqueue_task() which would increment
"rq->nr_running" post which it calls wakeup_preempt() which is
responsible for setting TIF_NEED_RESCHED (via a resched IPI or by
setting TIF_NEED_RESCHED on a TIF_POLLING_NRFLAG idle CPU) The key
thing to note in this case is that rq->nr_running is already non-zero
in case of a wakeup before TIF_NEED_RESCHED is set which would
lead to idle_cpu() check returning false.
In all cases, it seems that need_resched() check is unnecessary when
checking for idle_cpu() first since an impending wakeup racing with idle
load balancer will either set the "rq->ttwu_pending" or indicate a newly
woken task via "rq->nr_running".
Chasing the reason why this check might have existed in the first place,
I came across Peter's suggestion on the fist iteration of Suresh's
patch from 2011 [1] where the condition to raise the SCHED_SOFTIRQ was:
sched_ttwu_do_pending(list);
if (unlikely((rq->idle == current) &&
rq->nohz_balance_kick &&
!need_resched()))
raise_softirq_irqoff(SCHED_SOFTIRQ);
Since the condition to raise the SCHED_SOFIRQ was preceded by
sched_ttwu_do_pending() (which is equivalent of sched_ttwu_pending()) in
the current upstream kernel, the need_resched() check was necessary to
catch a newly queued task. Peter suggested modifying it to:
if (idle_cpu() && rq->nohz_balance_kick && !need_resched())
raise_softirq_irqoff(SCHED_SOFTIRQ);
where idle_cpu() seems to have replaced "rq->idle == current" check.
Even back then, the idle_cpu() check would have been sufficient to catch
a new task being enqueued. Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") overloads the interpretation of
TIF_NEED_RESCHED for TIF_POLLING_NRFLAG idling, remove the
need_resched() check in nohz_csd_func() to raise SCHED_SOFTIRQ based
on Peter's suggestion.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-3-kprateek.nayak@amd.com
|
|
do_softirq_post_smp_call_flush() on PREEMPT_RT kernels carries a
WARN_ON_ONCE() for any SOFTIRQ being raised from an SMP-call-function.
Since do_softirq_post_smp_call_flush() is called with preempt disabled,
raising a SOFTIRQ during flush_smp_call_function_queue() can lead to
longer preempt disabled sections.
Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") IPIs to an idle CPU in
TIF_POLLING_NRFLAG mode can be optimized out by instead setting
TIF_NEED_RESCHED bit in idle task's thread_info and relying on the
flush_smp_call_function_queue() in the idle-exit path to run the
SMP-call-function.
To trigger an idle load balancing, the scheduler queues
nohz_csd_function() responsible for triggering an idle load balancing on
a target nohz idle CPU and sends an IPI. Only now, this IPI is optimized
out and the SMP-call-function is executed from
flush_smp_call_function_queue() in do_idle() which can raise a
SCHED_SOFTIRQ to trigger the balancing.
So far, this went undetected since, the need_resched() check in
nohz_csd_function() would make it bail out of idle load balancing early
as the idle thread does not clear TIF_POLLING_NRFLAG before calling
flush_smp_call_function_queue(). The need_resched() check was added with
the intent to catch a new task wakeup, however, it has recently
discovered to be unnecessary and will be removed in the subsequent
commit after which nohz_csd_function() can raise a SCHED_SOFTIRQ from
flush_smp_call_function_queue() to trigger an idle load balance on an
idle target in TIF_POLLING_NRFLAG mode.
nohz_csd_function() bails out early if "idle_cpu()" check for the
target CPU, and does not lock the target CPU's rq until the very end,
once it has found tasks to run on the CPU and will not inhibit the
wakeup of, or running of a newly woken up higher priority task. Account
for this and prevent a WARN_ON_ONCE() when SCHED_SOFTIRQ is raised from
flush_smp_call_function_queue().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-2-kprateek.nayak@amd.com
|
|
Commit 8f9ea86fdf99b added some logic to sched_setaffinity that included
a WARN when a per-task affinity assignment races with a cpuset update.
Specifically, we can have a race where a cpuset update results in the
task affinity no longer being a subset of the cpuset. That's fine; we
have a fallback to instead use the cpuset mask. However, we have a WARN
set up that will trigger if the cpuset mask has no overlap at all with
the requested task affinity. This shouldn't be a warning condition; its
trivial to create this condition.
Reproduced the warning by the following setup:
- $PID inside a cpuset cgroup
- another thread repeatedly switching the cpuset cpus from 1-2 to just 1
- another thread repeatedly setting the $PID affinity (via taskset) to 2
Fixes: 8f9ea86fdf99b ("sched: Always preserve the user requested cpumask")
Signed-off-by: Josh Don <joshdon@google.com>
Acked-and-tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://lkml.kernel.org/r/20241111182738.1832953-1-joshdon@google.com
|
|
The condition in replenish_dl_new_period() that checks if a reservation
(dl_server) is deferred and is not handling a starvation case is
obviously wrong.
Fix it.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241127063740.8278-1-juri.lelli@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix physical address calculation for struct dma_debug_entry (Fedor
Pchelkin)
* tag 'dma-mapping-6.13-2024-11-30' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix physical address calculation for struct dma_debug_entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
|
|
A sigqueue belonging to a posix timer, which target is not a specific
thread but a whole thread group, is preferrably targeted to the current
task if it is part of that thread group.
However nothing prevents a posix timer event from queueing such a
sigqueue from a reaped yet running task. The interruptible code space
between exit_notify() and the final call to schedule() is enough for
posix_timer_fn() hrtimer to fire.
If that happens while the current task is part of the thread group
target, it is proposed to handle it but since its sighand pointer may
have been cleared already, the sigqueue is dropped even if there are
other tasks running within the group that could handle it.
As a result posix timers with thread group wide target may miss signals
when some of their threads are exiting.
Fix this with verifying that the current task hasn't been through
exit_notify() before proposing it as a preferred target so as to ensure
that its sighand is still here and stable.
complete_signal() might still reconsider the choice and find a better
target within the group if current has passed retarget_shared_pending()
already.
Fixes: bcb7ee79029d ("posix-timers: Prefer delivery of signals to the current thread")
Reported-by: Anthony Mallet <anthony.mallet@laas.fr>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241122234811.60455-1-frederic@kernel.org
Closes: https://lore.kernel.org/all/26411.57288.238690.681680@gargle.gargle.HOWL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Add trace flag for NEED_RESCHED_LAZY
Now that NEED_RESCHED_LAZY is upstream, add it to the status bits of
the common_flags. This will now show when the NEED_RESCHED_LAZY flag
is set that is used for debugging latency issues in the kernel via a
trace.
- Remove leftover "__idx" variable when SRCU was removed from the
tracepoint code
- Add rcu_tasks_trace guard
To add a guard() around the tracepoint code, a rcu_tasks_trace guard
needs to be created first.
- Remove __DO_TRACE() macro and just call __DO_TRACE_CALL() directly
The DO_TRACE() macro has conditional locking depending on what was
passed into the macro parameters. As the guts of the macro has been
moved to __DO_TRACE_CALL() to handle static call logic, there's no
reason to keep the __DO_TRACE() macro around.
It is better to just do the locking in place without the conditionals
and call __DO_TRACE_CALL() from those locations. The "cond" passed in
can also be moved out of that macro. This simplifies the code.
- Remove the "cond" from the system call tracepoint macros
The "cond" variable was added to allow some tracepoints to check a
condition within the static_branch (jump/nop) logic. The system calls
do not need this. Removing it simplifies the code.
- Replace scoped_guard() with just guard() in the tracepoint logic
guard() works just as well as scoped_guard() in the tracepoint logic
and the scoped_guard() causes some issues.
* tag 'trace-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use guard() rather than scoped_guard()
tracing: Remove cond argument from __DECLARE_TRACE_SYSCALL
tracing: Remove conditional locking from __DO_TRACE()
rcupdate_trace: Define rcu_tasks_trace lock guard
tracing: Remove __idx variable from __DO_TRACE
tracing: Move it_func[0] comment to the relevant context
tracing: Record task flag NEED_RESCHED_LAZY.
|
|
Due to an unsigned cast, adjtimex() returns the wrong offest when using
ADJ_MICRO and the offset is negative. In this case a small negative offset
returns approximately 4.29 seconds (~ 2^32/1000 milliseconds) due to the
unsigned cast of the negative offset.
This cast was added when the kernel internal struct timex was changed to
use type long long for the time offset value to address the problem of a
64bit/32bit division on 32bit systems.
The correct cast would have been (s32), which is correct as time_offset can
only be in the range of [INT_MIN..INT_MAX] because the shift constant used
for calculating it is 32. But that's non-obvious.
Remove the cast and use div_s64() to cure the issue.
[ tglx: Fix white space damage, use div_s64() and amend the change log ]
Fixes: ead25417f82e ("timex: use __kernel_timex internally")
Signed-off-by: Marcelo Dalmas <marcelo.dalmas@ge.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/SJ0P101MB03687BF7D5A10FD3C49C51E5F42E2@SJ0P101MB0368.NAMP101.PROD.OUTLOOK.COM
|
|
Offset into the page should also be considered while calculating a physical
address for struct dma_debug_entry. page_to_phys() just shifts the value
PAGE_SHIFT bits to the left so offset part is zero-filled.
An example (wrong) debug assertion failure with CONFIG_DMA_API_DEBUG
enabled which is observed during systemd boot process after recent
dma-debug changes:
DMA-API: e1000 0000:00:03.0: cacheline tracking EEXIST, overlapping mappings aren't supported
WARNING: CPU: 4 PID: 941 at kernel/dma/debug.c:596 add_dma_entry
CPU: 4 UID: 0 PID: 941 Comm: ip Not tainted 6.12.0+ #288
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:add_dma_entry kernel/dma/debug.c:596
Call Trace:
<TASK>
debug_dma_map_page kernel/dma/debug.c:1236
dma_map_page_attrs kernel/dma/mapping.c:179
e1000_alloc_rx_buffers drivers/net/ethernet/intel/e1000/e1000_main.c:4616
...
Found by Linux Verification Center (linuxtesting.org).
Fixes: 9d4f645a1fd4 ("dma-debug: store a phys_addr_t in struct dma_debug_entry")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
[hch: added a little helper to clean up the code]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Luis Chamberlain:
- The whole caching of module code into huge pages by Mike Rapoport is
going in through Andrew Morton's tree due to some other code
dependencies. That's really the biggest highlight for Linux kernel
modules in this release. With it we share huge pages for modules,
starting off with x86. Expect to see that soon through Andrew!
- Helge Deller addressed some lingering low hanging fruit alignment
enhancements by. It is worth pointing out that from his old patch
series I dropped his vmlinux.lds.h change at Masahiro's request as he
would prefer this to be specified in asm code [0].
[0] https://lore.kernel.org/all/20240129192644.3359978-5-mcgrof@kernel.org/T/#m9efef5e700fbecd28b7afb462c15eed8ba78ef5a
- Matthew Maurer and Sami Tolvanen have been tag teaming to help get us
closer to a modversions for Rust. In this cycle we take in quite a
lot of the refactoring for ELF validation. I expect modversions for
Rust will be merged by v6.14 as that code is mostly ready now.
- Adds a new modules selftests: kallsyms which helps us tests
find_symbol() and the limits of kallsyms on Linux today.
- We have a realtime mailing list to kernel-ci testing for modules now
which relies and combines patchwork, kpd and kdevops:
https://patchwork.kernel.org/project/linux-modules/list/
https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/README.md
https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/kernel-ci-kpd.md
https://github.com/linux-kdevops/kdevops/blob/main/docs/kernel-ci/linux-modules-kdevops-ci.md
If you want to help avoid Linux kernel modules regressions, now its
simple, just add a new Linux modules sefltests under
tools/testing/selftests/module/ That is it. All new selftests will be
used and leveraged automatically by the CI.
* tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
tests/module/gen_test_kallsyms.sh: use 0 value for variables
scripts: Remove export_report.pl
selftests: kallsyms: add MODULE_DESCRIPTION
selftests: add new kallsyms selftests
module: Reformat struct for code style
module: Additional validation in elf_validity_cache_strtab
module: Factor out elf_validity_cache_strtab
module: Group section index calculations together
module: Factor out elf_validity_cache_index_str
module: Factor out elf_validity_cache_index_sym
module: Factor out elf_validity_cache_index_mod
module: Factor out elf_validity_cache_index_info
module: Factor out elf_validity_cache_secstrings
module: Factor out elf_validity_cache_sechdrs
module: Factor out elf_validity_ehdr
module: Take const arg in validate_section_offset
modules: Add missing entry for __ex_table
modules: Ensure 64-bit alignment on __ksymtab_* sections
|
|
This reverts commit 2a010c41285345da60cece35575b4e0af7e7bf44.
Rui Ueyama <rui314@gmail.com> writes:
> I'm the creator and the maintainer of the mold linker
> (https://github.com/rui314/mold). Recently, we discovered that mold
> started causing process crashes in certain situations due to a change
> in the Linux kernel. Here are the details:
>
> - In general, overwriting an existing file is much faster than
> creating an empty file and writing to it on Linux, so mold attempts to
> reuse an existing executable file if it exists.
>
> - If a program is running, opening the executable file for writing
> previously failed with ETXTBSY. If that happens, mold falls back to
> creating a new file.
>
> - However, the Linux kernel recently changed the behavior so that
> writing to an executable file is now always permitted
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a010c412853).
>
> That caused mold to write to an executable file even if there's a
> process running that file. Since changes to mmap'ed files are
> immediately visible to other processes, any processes running that
> file would almost certainly crash in a very mysterious way.
> Identifying the cause of these random crashes took us a few days.
>
> Rejecting writes to an executable file that is currently running is a
> well-known behavior, and Linux had operated that way for a very long
> time. So, I don’t believe relying on this behavior was our mistake;
> rather, I see this as a regression in the Linux kernel.
Quoting myself from commit 2a010c412853 ("fs: don't block i_writecount during exec")
> Yes, someone in userspace could potentially be relying on this. It's not
> completely out of the realm of possibility but let's find out if that's
> actually the case and not guess.
It seems we found out that someone is relying on this obscure behavior.
So revert the change.
Link: https://github.com/rui314/mold/issues/1361
Link: https://lore.kernel.org/r/4a2bc207-76be-4715-8e12-7fc45a76a125@leemhuis.info
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
|
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] <TASK>
[ 160.881477] ? __die+0x20/0x60
[ 160.884586] ? page_fault_oops+0x15a/0x450
[ 160.888746] ? search_extable+0x22/0x30
[ 160.892647] ? search_bpf_extables+0x5f/0x80
[ 160.896988] ? exc_page_fault+0xa9/0x140
[ 160.900973] ? asm_exc_page_fault+0x22/0x30
[ 160.905232] ? dev_map_free+0x77/0x170
[ 160.909043] ? dev_map_free+0x58/0x170
[ 160.912857] bpf_map_free_deferred+0x51/0x90
[ 160.917196] process_one_work+0x142/0x370
[ 160.921272] worker_thread+0x29e/0x3b0
[ 160.925082] ? rescuer_thread+0x4b0/0x4b0
[ 160.929157] kthread+0xd4/0x110
[ 160.932355] ? kthread_park+0x80/0x80
[ 160.936079] ret_from_fork+0x2d/0x50
[ 160.943396] ? kthread_park+0x80/0x80
[ 160.950803] ret_from_fork_asm+0x11/0x20
[ 160.958482] </TASK>
Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
CC: stable@vger.kernel.org
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Jordy Zomer <jordyzomer@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20241122121030.716788-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
These hooks are not useful for BPF LSM currently.
Furthermore a recent renaming introduced build warnings:
BTFIDS vmlinux
WARN: resolve_btfids: unresolved symbol bpf_lsm_task_getsecid_obj
WARN: resolve_btfids: unresolved symbol bpf_lsm_current_getsecid_subj
Link: https://lore.kernel.org/lkml/20241123-bpf_lsm_task_getsecid_obj-v1-1-0d0f94649e05@weissschuh.net/
Fixes: 37f670aacd48 ("lsm: use lsm_prop in security_current_getsecid")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241125-bpf_lsm_task_getsecid_obj-v2-1-c8395bde84e0@weissschuh.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Josh Poimboeuf reports that he got a "will-it-scale.per_process_ops 1.9%
improvement" report for his patch that changed __get_user() to use
pointer masking instead of the explicit speculation barrier. However,
that patch doesn't actually work in the general case, because some (very
bad) architecture-specific code actually depends on __get_user() also
working on kernel addresses.
A profile showed that the offending __get_user() was the futex code,
which really should be fixed up to not use that horrid legacy case.
Rewrite futex_get_value_locked() to use the modern user acccess helpers,
and inline it so that the compiler not only avoids the function call for
a few instructions, but can do CSE on the address masking.
It also turns out the x86 futex functions have unnecessary barriers in
other places, so let's fix those up too.
Link: https://lore.kernel.org/all/20241115230653.hfvzyf3aqqntgp63@jpoimboe/
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein:
- Fix a syzbot reported NULL pointer deref with bfs lower layers
- Fix a copy up failure of large file from lower fuse fs
- Followup cleanup of backing_file API from Miklos
- Introduction and use of revert/override_creds_light() helpers, that
were suggested by Christian as a mitigation to cache line bouncing
and false sharing of fields in overlayfs creator_cred long lived
struct cred copy.
- Store up to two backing file references (upper and lower) in an
ovl_file container instead of storing a single backing file in
file->private_data.
This is used to avoid the practice of opening a short lived backing
file for the duration of some file operations and to avoid the
specialized use of FDPUT_FPUT in such occasions, that was getting in
the way of Al's fd_file() conversions.
* tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: Filter invalid inodes with missing lookup function
ovl: convert ovl_real_fdget() callers to ovl_real_file()
ovl: convert ovl_real_fdget_path() callers to ovl_real_file_path()
ovl: store upper real file in ovl_file struct
ovl: allocate a container struct ovl_file for ovl private context
ovl: do not open non-data lower file for fsync
ovl: Optimize override/revert creds
ovl: pass an explicit reference of creators creds to callers
ovl: use wrapper ovl_revert_creds()
fs/backing-file: Convert to revert/override_creds_light()
cred: Add a light version of override/revert_creds()
backing-file: clean up the API
ovl: properly handle large files in ovl_security_fileattr
|
