| Age | Commit message (Collapse) | Author |
|---|
|
On s390 the perf test case ftrace sometimes fails as follows:
# ./perf test ftrace
79: perf ftrace tests : FAILED!
#
The failure depends on the kernel .config file. Some configurations
always work fine, some do not. The ftrace profile test mostly fails,
because the ring buffer was not large enough, and some lines
(especially the interesting ones with nanosleep in it) where dropped.
To achieve success for all tested kernel configurations, enlarge
the buffer to store the traces completely without wrapping.
The default buffer size is too small for all kernel configurations.
Set the buffer size of for the ftrace profile test to 16 MB.
Output after:
# ./perf test ftrace
79: perf ftrace tests : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241119064856.641446-1-tmricht@linux.ibm.com
Suggested-by: Sven Schnelle <svens@linux.ibm.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Arm a57 only has speculative branch events so this test fails there. The
test doesn't depend on branch instructions so change it to instructions
which is pretty much guaranteed to be everywhere. The
test_branch_counter() test above already tests for the existence of the
branches event and skips if its not present.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241115161600.228994-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
isn't resolved
The purpose of this test is to test for races in the exit of 'perf
trace' missing the last events, it was failing when the COMM wasn't
resolved either because we missed some PERF_RECORD_COMM or somehow
raced on getting it from procfs.
Add --no-comm to the 'perf trace' command line so that we get a
consistent, pid only output, which allows the test to achieve its goal.
This is the output from
'perf trace --no-comm -e syscalls:sys_enter_exit_group':
0.000 21953 syscalls:sys_enter_exit_group()
0.000 21955 syscalls:sys_enter_exit_group()
0.000 21957 syscalls:sys_enter_exit_group()
0.000 21959 syscalls:sys_enter_exit_group()
0.000 21961 syscalls:sys_enter_exit_group()
0.000 21963 syscalls:sys_enter_exit_group()
0.000 21965 syscalls:sys_enter_exit_group()
0.000 21967 syscalls:sys_enter_exit_group()
0.000 21969 syscalls:sys_enter_exit_group()
0.000 21971 syscalls:sys_enter_exit_group()
Now it passes:
root@number:~# perf test "trace exit race"
110: perf trace exit race : Ok
root@number:~#
root@number:~# perf test -v "trace exit race"
110: perf trace exit race : Ok
root@number:~#
If we artificially make it run just 9 times instead of the 10 it runs,
i.e. by manually doing:
trace_shutdown_race() {
for _ in $(seq 9); do
that 9 is $iter, 10 in the patch, we get:
root@number:~# vim ~acme/libexec/perf-core/tests/shell/trace_exit_race.sh
root@number:~# perf test -v "trace exit race"
--- start ---
test child forked, pid 24629
Missing output, expected 10 but only got 9
---- end(-1) ----
110: perf trace exit race : FAILED!
root@number:~#
I.e. 9 'perf trace' calls produced the expected output, the inverse grep
didn't show anything, so the patch provided by Howard for the previous
patch kicks in and shows a more informative message.
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Peterson <benjamin@engflow.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZzdknoHqrJbojb6P@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If it fails we need to check what was the reason, what were the lines
that didn't match the expected format, so:
root@number:~# perf test -v "trace exit race"
--- start ---
test child forked, pid 2028724
Lines not matching the expected regexp: ' +[0-9]+\.[0-9]+ +true/[0-9]+ syscalls:sys_enter_exit_group\(\)$':
0.000 :2028750/2028750 syscalls:sys_enter_exit_group()
---- end(-1) ----
110: perf trace exit race : FAILED!
root@number:~#
In this case we're not resolving the process COMM for some reason and
fallback to printing just the pid/tid, this will be fixed in a followup
patch.
Howard Chu spotted a problem with single code surrounding a regexp, that
made the test always fail, but since there were some failures when I
tested (COMM not being resolved in some of the results) the end inverse
grep would show some lines and thus didn't notice the single quote
problem.
He also provided a patch to test if less than the number of expected
matches took place but all of them with the expected output, in which
case the inverse grep wouldn't show anything, confusing the tester.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Peterson <benjamin@engflow.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZzdknoHqrJbojb6P@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test that checks that trace output is not lost to races. This is
accomplished by tracing the exit_group syscall of "true" multiple times and
checking for correct output.
Signed-off-by: Benjamin Peterson <benjamin@engflow.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241107232128.108981-3-benjamin@engflow.com
[ Addressed two ShellCheck warnings ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
During the parallel testing, I've noticed some ftrace test failures. It
seems the regex pattern checks 100 msec of nanosleep with the error
range of 10 msec. But sometimes it's affected by other processes and
resulted in more time in the syscall.
The following output shows that it took more than 120 msec and failed.
Let's update the regex pattern so that it can allow more drifts.
perf ftrace profile test
# Total (us) Avg (us) Max (us) Count Function
121279.500 121279.500 121279.500 1 __x64_sys_clock_nanosleep
121278.400 121278.400 121278.400 1 common_nsleep
121277.800 121277.800 121277.800 1 hrtimer_nanosleep
121277.100 121277.100 121277.100 1 do_nanosleep
341760.289 56960.048 121273.400 6 schedule
176.200 25.171 31.616 7 scheduler_tick
0.923 0.923 0.923 1 native_smp_send_reschedule
345522.360 69104.472 345320.600 5 __x64_sys_execve
345486.585 69097.317 345312.700 5 do_execveat_common.isra.0
340730.300 340730.300 340730.300 1 bprm_execve
1.758 0.879 0.883 2 sched_mm_cid_before_execve
1.112 1.112 1.112 1 sched_mm_cid_after_execve
---- end(-1) ----
81: perf ftrace tests : FAILED!
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241102231702.2262258-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The cpu-list part of this testcase has proven itself to be unreliable.
Sometimes, we get "<not counted>" for system.slice when pinned to CPUs
0 and 1. In such case, the test fails.
Since we cannot simply guarantee that any system.slice load will run
on any arbitrary list of CPUs, except the whole set of all CPUs, let's
rather remove the cpu-list subtest.
Fixes: a84260e314029e6dc9904fd ("perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: vmolnaro@redhat.com
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241101102812.576425-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To get the fixes in the perf-tools branch. Resolved a conflict due to
RISC-V's syscall table change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Replace `brstack` workload with `sqrtloop` workload, because `sqrtloop`
workload contains fork(), which is suitable for testing the bperf event
inheritance feature.
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Cc: song@kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20241021110201.325617-3-wutengda@huaweicloud.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Some shell tests compete for resources and so can't run with other
tests, tag such tests. The "(exclusive)" stems from shared/exclusive
to describe how the tests run as if holding a lock.
For ARM/coresight tests:
Suggested-by: James Clark <james.clark@linaro.org>
Additional failing tests:
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Python's json.tool will output the input json to stdout. Redirect to
/dev/null to avoid blocking on stdout writes.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241025192109.132482-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Test case test_adding_blacklisted ends in failure if the blacklisted
probe is of an assembler function with no DWARF available. At the same
time, probing the blacklisted function with ASM DWARF doesn't test the
blacklist itself as the failure is a result of the broken DWARF.
When the broken DWARF output is encountered, check if the probed
function was compiled by the assembler. If so, the broken DWARF message
is expected and does not report a perf issue, else report a failure. If
the ASM DWARF affected the probe, try the next probe on the blacklist.
If the first 5 probes are defective due to broken DWARF, skip the test
case.
Fixes: def5480d63c1e847 ("perf testsuite probe: Add test for blacklisted kprobes handling")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241017161555.236769-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's a very simply test just to run with cycles:P and instructions:P
events.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The exclude_guest in the event attribute is to limit profiling in the
host environment. But I'm not sure why we want to set it by default
cause we don't care about it in most cases and I feel like it just
makes new PMU implementation complicated.
Of course it's useful for perf kvm command so I added the
exclude_GH_default variable to preserve the old behavior for perf kvm
and other commands like perf record and stat won't set the exclude bit.
This is helpful for AMD IBS case since having exclude_guest bit will
clear new feature bit due to the missing feature check logic.
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 0
$ perf record -W -e ibs_op// -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
Intestingly, I found it sets the exclude_bit if "u" modifier is used.
I don't know why but it's neither intuitive nor consistent. Let's
remove the bit there too.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Commit 7b100989b4f6bce70 ("perf evlist: Remove __evlist__add_default")
changed to parse "cycles:P" event instead of creating a new cycles
event for perf record. But it also changed the way how modifiers are
handled so it doesn't set the exclude_guest bit by default.
It seems Apple M1 PMU requires exclude_guest set and returns EOPNOTSUPP
if not. Let's add a fallback so that it can work with default events.
Also update perf stat hybrid tests to handle possible u or H modifiers.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-2-namhyung@kernel.org
Fixes: 7b100989b4f6bce70 ("perf evlist: Remove __evlist__add_default")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Perf test case 84 'perf pipe recording and injection test'
sometime fails on s390, especially on z/VM virtual machines.
This is caused by a very short run time of workload
# perf test -w noploop
which runs for 1 second. Occasionally this is not long
enough and the perf report has no samples for symbol noploop.
Fix this and enlarge the runtime for the perf work load
to 3 seconds. This ensures the symbol noploop is always
present. Since only s390 is affected, make this loop
architecture dependend.
Output before:
Inject -b build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.277 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB
/tmp/perf.data.ELzRdq (4031 samples) ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
Inject -b build-ids test [Success]
Inject --buildid-all build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB - ]
Inject --buildid-all build-ids test [Failed - cannot find
noploop function in pipe #2]
Output after:
Successful execution for over 10 times in a loop.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Link: https://lore.kernel.org/r/20241018081732.1391060-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Like in the metricgroup tests, it should check the permission first and
then skip relevant failures accordingly.
Also it needs to try again with the system wide flag properly. On the
second round, check if the result has the metric name because other
failure cases are checked in the first round already.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241018204306.741972-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Now the attr tests are shell tests move the associated python and
configuration files. Update the installation build rules for the new
directories. Recycle the lib install rules for python files allowing
the explicit attr.py install line to be dropped.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The "Setup struct perf_event_attr" test in attr.c does a bunch of
directory finding to set up running a python test that in general is
more brittle than similar logic we have in shell tests. Add a shell
test that invokes and runs the tests in the python attr.py script.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When the threshold isn't unknown add a value to the json like:
"metric-threshold" : "good"
A more complete example:
```
$ perf stat -a -j -I 1000
{"interval" : 1.001089747, "counter-value" : "16045.281449", "unit" : "msec", "event" : "cpu-clock", "event-runtime" : 16045355135, "pcnt-running" : 100.00, "metric-value" : "16.045281", "metric-unit" : "CPUs utilized"}
{"interval" : 1.001089747, "counter-value" : "10003.000000", "unit" : "", "event" : "context-switches", "event-runtime" : 16045314844, "pcnt-running" : 100.00, "metric-value" : "623.423156", "metric-unit" : "/sec"}
{"interval" : 1.001089747, "counter-value" : "328.000000", "unit" : "", "event" : "cpu-migrations", "event-runtime" : 16045321403, "pcnt-running" : 100.00, "metric-value" : "20.442147", "metric-unit" : "/sec"}
{"interval" : 1.001089747, "counter-value" : "20114.000000", "unit" : "", "event" : "page-faults", "event-runtime" : 16045355927, "pcnt-running" : 100.00, "metric-value" : "1.253577", "metric-unit" : "K/sec"}
{"interval" : 1.001089747, "counter-value" : "4066679471.000000", "unit" : "", "event" : "instructions", "event-runtime" : 16045369123, "pcnt-running" : 100.00, "metric-value" : "1.628330", "metric-unit" : "insn per cycle"}
{"interval" : 1.001089747, "counter-value" : "2497454658.000000", "unit" : "", "event" : "cycles", "event-runtime" : 16045374810, "pcnt-running" : 100.00, "metric-value" : "0.155650", "metric-unit" : "GHz"}
{"interval" : 1.001089747, "counter-value" : "914974294.000000", "unit" : "", "event" : "branches", "event-runtime" : 16045379877, "pcnt-running" : 100.00, "metric-value" : "57.024509", "metric-unit" : "M/sec"}
{"interval" : 1.001089747, "counter-value" : "9237201.000000", "unit" : "", "event" : "branch-misses", "event-runtime" : 16045375017, "pcnt-running" : 100.00, "metric-value" : "1.009559", "metric-unit" : "of all branches", "metric-threshold" : "good"}
{"interval" : 1.001089747, "event-runtime" : 16045397172, "pcnt-running" : 100.00, "metricgroup" : "TopdownL1"}
{"interval" : 1.001089747, "metric-value" : "22.036686", "metric-unit" : "% tma_backend_bound", "metric-threshold" : "bad"}
{"interval" : 1.001089747, "metric-value" : "7.610161", "metric-unit" : "% tma_bad_speculation", "metric-threshold" : "good"}
{"interval" : 1.001089747, "metric-value" : "36.729687", "metric-unit" : "% tma_frontend_bound", "metric-threshold" : "bad"}
{"interval" : 1.001089747, "metric-value" : "33.623465", "metric-unit" : "% tma_retiring"}
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241017175356.783793-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
On my system, perf list is very slow to print the whole events. I think
there's a performance issue in SDT and uprobes event listing. I noticed
this issue while running perf test on x86 but it takes long to check
some CoreSight event which should be skipped quickly.
Anyway, some test uses perf list to check whether the required event is
available before running the test. The perf list command can take an
argument to specify event class or (glob) pattern. But glob pattern is
only to suppress output for unmatched ones after checking all events.
In this case, specifying event class is better to reduce the number of
events it checks and to avoid buggy subsystems entirely.
No functional changes intended.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20241016065654.269994-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Command perf test 86 fails on s390:
# perf test -F 86
ping 868299 [007] 28248.013596: probe_libc:inet_pton_1: (3ff95948020)
3ff95948020 inet_pton+0x0 (inlined)
3ff9595e6e7 text_to_binary_address+0x1007 (inlined)
3ff9595e6e7 gaih_inet+0x1007 (inlined)
FAIL: expected backtrace entry \
"main\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$"
got "3ff9595e6e7 gaih_inet+0x1007 (inlined)"
86: probe libc's inet_pton & backtrace it with ping : FAILED!
#
The root cause is a new stack layout, two functions have been added
as seen below.
# perf script | tac | grep -m1 '^ping' -B9 | tac
ping 866856 [007] 25979.494921: probe_libc:inet_pton: (3ff8ec48020)
3ff8ec48020 inet_pton+0x0 (inlined)
new --> 3ff8ec5e6e7 text_to_binary_address+0x1007 (inlined)
new --> 3ff8ec5e6e7 gaih_inet+0x1007 (inlined)
3ff8ec5e6e7 getaddrinfo+0x1007 (/usr/lib64/libc.so.6)
2aa3fe04bf5 main+0xff5 (/usr/bin/ping)
3ff8eb34a5b __libc_start_call_main+0x8b (/usr/lib64/libc.so.6)
3ff8eb34b5d __libc_start_main@GLIBC_2.2+0xad (inlined)
2aa3fe06a1f [unknown] (/usr/bin/ping)
#
The new functions in the call chain are:
- text_to_binary_address()
- gaih_inet().
Both functions are inlined and do not show up in the output
of the nm command:
# nm -a /usr/lib64/libc.so.6 | \
grep -E '(text_to_binary_address|gaih_inet)$'
#
There is no possibility to add these 2 functions depending on their
existance in the C library.
Add text_to_binary_address() and gaih_inet() to the list of
expected functions in an compatible way and extend the regular
expression. On s390 the backtrace can now be
Before After
probe_libc:inet_pton probe_libc:inet_pton
inet_pton inet_pton
getaddrinfo getaddrinfo | text_to_binary_address
main main | gaih_inet
Output after:
# perf test -F 86
86: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241001124224.3370306-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add more test cases to cover all supported topdown events regroup cases.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-7-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add counting and leader sampling tests to verify topdown events including
raw format can be reordered correctly.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-6-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add leader sampling test to validate event counts are captured into
record and the count value is consistent.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-5-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
perf test 70 takes a long time. One culprit is the output of command
perf annotate. Per default enabled are
- demangle symbol names
- interleave source code with assembly code.
Disable demangle of symbols and abort the annotation
after the first 250 lines.
This speeds up the test case considerable, for example
on s390:
Output before:
# time perf test 70
70: perf annotate basic tests : Ok
.....
real 2m7.467s
user 1m26.869s
sys 0m34.086s
#
Output after:
# time perf test 70
70: perf annotate basic tests : Ok
real 0m3.341s
user 0m1.606s
sys 0m0.362s
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20240917085706.249691-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Test that one cycles event is opened for each core PMU when "perf stat"
is run without arguments.
The event line can either be output as "pmu/cycles/" or just "cycles" if
there is only one PMU. Include 2 spaces for padding in the one PMU case
to avoid matching when the word cycles is included in metric
descriptions.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
PMUs aren't listed in /sys/devices/ on DT devices, so change the search
directory to /sys/bus/event_source/devices which works everywhere. Also
add armv8_cortex_* as a known PMU type to search for to make the test
run on more devices.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-7-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Without aggregation on Intel:
```
$ perf stat -e instructions,cycles ...
```
Will use "cycles" for the name of the legacy cycles event but as
"instructions" has a sysfs name it will and a "[cpu]" PMU suffix. This
often breaks things as the space between the event and the PMU name
look like an extra column. The existing uniquify logic was also
uniquifying in cases when all events are core and not with uncore
events, it was not correctly handling modifiers, etc.
Change the logic so that an initial pass that can disable
uniquification is run. For individual counters, disable uniquification
in more cases such as for consistency with legacy events or for
libpfm4 events. Don't use the "[pmu]" style suffix in uniquification,
always use "pmu/.../". Change how modifiers/terms are handled in the
uniquification so that they look like parse-able events.
This fixes "102: perf stat metrics (shadow stat) test:" that has been
failing due to "instructions [cpu]" breaking its column/awk logic when
values aren't aggregated. This started happening when instructions
could match a sysfs rather than a legacy event, so the fixes tag
reflects this.
Fixes: 617824a7f0f7 ("perf parse-events: Prefer sysfs/JSON hardware events over legacy")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
[ Fix Intel TPEBS counting mode test ]
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-3-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Refactor code to have some more error diagnosis on traps, etc. and to
do less work on each line. Add an ignore situation for security failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240925173013.12789-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Run a few samples through the disassembly script and check to see that
at least one branch instruction is printed.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Previously "set -e" meant any non-zero exit code from perf stat would
cause a test failure. As a non-zero exit happens when there aren't
sufficient permissions, check for this case and make the exit code
2/skip for it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240502223115.2357499-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
number regex
Thomas reported the vfs_getname perf tests failing on s/390, it seems it
was just to some extraneous '=' somehow getting into the regexp, remove
it, now:
root@x1:~# perf test getname
91: Add vfs_getname probe to get syscall args filenames : Ok
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : Ok
root@x1:~#
Second one remains a mistery, have to take some time to nail it down.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>,
Link: https://lore.kernel.org/lkml/1d7f3b7b-9edc-4d90-955c-9345428563f1@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add -B option that lazily inserts mmap2 events thereby dropping all
mmap events without samples. This is similar to the behavior of -b
where only build_id events are inserted when a dso is accessed in a
sample.
File size savings can be significant in system-wide mode, consider:
$ perf record -g -a -o perf.data sleep 1
$ perf inject -B -i perf.data -o perf.new.data
$ ls -al perf.data perf.new.data
5147049 perf.data
2248493 perf.new.data
Give test coverage of the new option in pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add an option that allows all mmap or mmap2 events to be rewritten as
mmap2 events with build IDs.
This is similar to the existing -b/--build-ids and --buildid-all options
except instead of adding a build_id event an existing mmap/mmap2 event
is used as a template and a new mmap2 event synthesized from it.
As mmap2 events are typical this avoids the insertion of build_id
events.
Add test coverage to the pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In probe_vfs_getname.sh, current we use "perf record --dry-run"
to check for libtraceevent and skip the test if perf is not
build with libtraceevent. Change the check to use "perf check feature"
option
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-6-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we use output of 'perf version --build-options', to check
whether perf was built with libtraceevent support.
Instead, use 'perf check feature libtraceevent' to check for
libtraceevent support.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-5-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The probe command is dependent on libelf. Skip the test if the
required probe command isn't present.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Additional pipe tests where piped files are written to disk. This
means that spotting a file name of "-" isn't a sufficient "is pipe?"
test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2966908
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Failing bpf-filter test [Success]
Group bpf-filter test
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
Cgroup bpf-filter test
Cgroup bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Shellcheck versions < v0.7.2 can't follow this path so add the helper to
fix the following warning:
In tests/shell/trace_btf_enum.sh line 13:
. "$(dirname $0)"/lib/probe.sh
^--------------------------^ SC1090: Can't follow non-constant source.
Use a directive to specify location.
Fixes: d66763fed30f0bd8 ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'")
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240809095426.3065163-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new 'perf report' test case that acts as an entry element in 'perf
test list'.
Runs multiple subtests from directory "base_report", which can be
expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-12-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test basic execution and some options of perf-report subcommand, like
show-nr-samples, header, showcpuutilization, pid and symbol filtering.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-11-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regular expression.
This output checking helper is designed to allow checking stderr output
of perf commands for unexpected messages, while ignoring messages that
are known to be harmless, e.g.:
"Lowering default frequency rate to \d+\."
"\d+ out of order events recorded."
etc.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-10-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf-probe command uses a specific semantics to describe probes.
Test some patterns that are known to be both valid and invalid if
they are handled appropriately.
This test is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-9-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test if various incompatible options are correctly handled-rejected.
It is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-8-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test basic behavior of perf-probe subcommand. It is run as a part of
perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-7-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test perf probe interface. Blacklisted functions should be rejected
when there is an attempt to set a kprobe to them.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-6-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Shellcheck is becoming a standard when building perf to prevent
any unnecessary mistakes. Fix shellcheck warnings in perf testsuite.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-5-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge perf testsuite setting files into common settings to reduce
duplicates and prevent errors.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-4-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
