| Age | Commit message (Collapse) | Author |
|---|
|
It seems perf sets the exclude_guest bit because of Intel PEBS
implementation which uses a virtual address. IIUC now kernel disables
PEBS when it goes to the guest mode regardless of this bit so we don't
need to set it explicitly. At least for the other archs/vendors.
I found the commit 1342798cc13e set the exclude_guest for precise_ip
in the tool and the commit 20b279ddb38c added kernel side enforcement
which was reverted by commit a706d965dcfd later.
Actually it doesn't set the exclude_guest for the default event
(cycles:P) already.
$ grep -m1 vendor /proc/cpuinfo
vendor_id : GenuineIntel
$ perf record -e cycles:P true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
$ perf evlist -v | tr ',' '\n' | grep -e exclude -e precise
precise_ip: 3
But having lower 'p' modifier set the bit for some reason.
$ perf record -e cycles:pp true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
$ perf evlist -v | tr ',' '\n' | grep -e exclude -e precise
precise_ip: 2
exclude_guest: 1
Actually AMD IBS suffers from this because it doesn't support excludes
and having this bit effectively disables new features in the current
implementation (due to the missing feature check).
$ grep -m1 vendor /proc/cpuinfo
vendor_id : AuthenticAMD
$ perf record -W -e cycles:p -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
By not setting exclude_guest, we can fix this inconsistency and the
troubles.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The exclude_guest in the event attribute is to limit profiling in the
host environment. But I'm not sure why we want to set it by default
cause we don't care about it in most cases and I feel like it just
makes new PMU implementation complicated.
Of course it's useful for perf kvm command so I added the
exclude_GH_default variable to preserve the old behavior for perf kvm
and other commands like perf record and stat won't set the exclude bit.
This is helpful for AMD IBS case since having exclude_guest bit will
clear new feature bit due to the missing feature check logic.
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 0
$ perf record -W -e ibs_op// -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
Intestingly, I found it sets the exclude_bit if "u" modifier is used.
I don't know why but it's neither intuitive nor consistent. Let's
remove the bit there too.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than treat tool events as a special kind of event, create a
tool only PMU where the events/aliases match the existing
duration_time, user_time and system_time events. Remove special
parsing and printing support for the tool events, but add function
calls for when PMU functions are called on a tool_pmu.
Move the tool PMU code in evsel into tool_pmu.c to better encapsulate
the tool event behavior in that file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Expose config_term_name as parse_events__term_type_str so that PMUs not
in pmu.c may access it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Hard coded terms like "config=10" are skipped by perf_pmu__config
assuming they were already applied to a perf_event_attr by parse
event's config_attr function. When doing a reverse number to name
lookup in perf_pmu__name_from_config, as the hardcoded terms aren't
applied the config value is incorrect leading to misses or false
matches. Fix this by adding a parameter to have perf_pmu__config apply
hardcoded terms too (not just in parse event's config_term_common).
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
"evsel->pmu_name" is only ever assigned a strdup of "pmu->name", a
strdup of "evsel->pmu_name" or NULL. As such, prefer to use
"pmu->name" directly and even to directly compare PMUs than PMU
names. For safety, add some additional NULL tests.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
[ Fix arm-spe.c usage of pmu_name and empty PMU name ]
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-6-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are cases where we want to match events like instructions and
cycles with legacy hardware values, in particular in stat-shadow's
hard coded metrics. An evsel's name isn't a good point of reference as
it gets altered, strstr would be too imprecise and re-parsing the
event from its name is silly. Instead, hold the legacy hardware event
name, determined during parsing, in the evsel for this matching case.
Inline evsel__match2 that is only used in builtin-diff.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than passing a fake PMU around, just pass that the fake PMU
should be used - true when doing testing. Move the fake PMU into
pmus.[ch] and try to abstract the PMU's properties in pmu.c, ie so
there is less "if fake_pmu" in non-PMU code. Give the fake PMU a made
up type number.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240907050830.6752-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On arm64 the breakpoint length should be 4-bytes but 8-bytes is
tolerated as perf passes that as sizeof(long). Just pass the correct
value.
On i386 the sizeof(long) check in the kernel needs to match the
kernel's long size. Check using an environment (uname checks) whether
4 or 8 bytes needs to be passed. Cache the value in a static.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240904050606.752788-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The default breakpoint length is "sizeof(long)" however this is
incorrect on platforms like Aarch64 where sizeof(long) is 8 but the
breakpoint length is 4. Add a helper function that can be used to
determine the correct breakpoint length, in this change it just
returns the existing default sizeof(long) value.
Use the helper in the bp_account test so that, when modifying the
event from a watchpoint to a breakpoint, the breakpoint length is
appropriate for the architecture and not just sizeof(long).
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240904050606.752788-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously the cpu_list is a string and typically no cpu_list is
passed to __add_event().
Wanting to make events have their cpus distinct from the PMU means that
in more occassions we want to pass a cpu_list.
If we're reading this from sysfs it is easier to read a perf_cpu_map
than allocate and pass around strings that will later be parsed.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20240718003025.1486232-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Retirement latency is a separate sampled count used on newer Intel
CPUs.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/r/20240720062102.444578-2-weilin.wang@intel.com
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Tool events unnecessarily open a dummy perf event which is useless
even with `perf record` which will still open a dummy event. Change
the behavior of tool events so:
- duration_time - call `rdclock` on open and then report the count as
a delta since the start in evsel__read_counter. This moves code out
of builtin-stat making it more general purpose.
- user_time/system_time - open the fd as either `/proc/pid/stat` or
`/proc/stat` for cases like system wide. evsel__read_counter will
read the appropriate field out of the procfs file. These values
were previously supplied by wait4, if the procfs read fails then
the wait4 values are used, assuming the process/thread terminated.
By reading user_time and system_time this way, interval mode, per
PID and per CPU can be supported although there are restrictions
given what the files provide (e.g. per PID can't be combined with
per CPU).
Opening any of the tool events for `perf record` is changed to return
invalid.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240503232849.17752-1-irogers@google.com
|
|
Compiling perf tool with 'DEBUG_PARSER=1' leads to errors:
$> make -C tools/perf PARSER_DEBUG=1 NO_LIBTRACEEVENT=1
...
CC util/expr-flex.o
CC util/expr.o
util/parse-events.c:33:12: error: redundant redeclaration of ‘parse_events_debug’ [-Werror=redundant-decls]
33 | extern int parse_events_debug;
| ^~~~~~~~~~~~~~~~~~
In file included from util/parse-events.c:18:
util/parse-events-bison.h:43:12: note: previous declaration of ‘parse_events_debug’ with type ‘int’
43 | extern int parse_events_debug;
| ^~~~~~~~~~~~~~~~~~
util/expr.c:27:12: error: redundant redeclaration of ‘expr_debug’ [-Werror=redundant-decls]
27 | extern int expr_debug;
| ^~~~~~~~~~
In file included from util/expr.c:11:
util/expr-bison.h:43:12: note: previous declaration of ‘expr_debug’ with type ‘int’
43 | extern int expr_debug;
| ^~~~~~~~~~
cc-1: all warnings being treated as errors
Remove extern declaration from the parse-envents.c file as there is a
conflict with the ones generated using bison and yacc tools from the file
parse-events.[ly].
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240605140453.614862-1-clement.legoffic@foss.st.com
|
|
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493.
This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.
The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The next commit will allow tracepoints starting with digits, but most
systems do not have any available by default so tests should skip the
actual "check if it exists in /sys/kernel/debug/tracing" step.
In order to do that, add a new boolean flag specifying if we should
actually "format" the probe or not.
Originally-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510-perf_digit-v4-2-db1553f3233b@codewreck.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The next patch will add another flag to parse_state that we will want to
pass to evsel__newtp_idx(), so pass the whole parse_state all the way
down instead of giving only the index
Originally-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510-perf_digit-v4-1-db1553f3233b@codewreck.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In tests/pmu.c, make a common utility that creates a PMU in a mkdtemp
directory and uses regular PMU parsing logic to load that PMU. Formats
must still be eagerly loaded as by default the PMU code assumes devices
are going to be in sysfs.
In util/pmu.[ch], hide perf_pmu__format_parse but add the eager argument
to perf_pmu__lookup called by perf_pmus__add_test_pmu. Later patches
will eagerly load other non-sysfs files when eager loading is enabled.
In tests/pmu.c, rather than manually constructing a list of term
arguments, just use the term parsing code from a string.
Add more comments and debug logging.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add comments. Pass ownership of the event name to save on a strdup.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add comments. Ensure leader->group_name is freed before overwriting
it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Moves 352 bytes from .data to .data.rel.ro.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use a struct/bitmap rather than a copied string from lexer.
In lexer give improved error message when too many precise flags are
given or repeated modifiers.
Before:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Bad modifier
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Bad modifier
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' -a true
event syntax error: '..cycles:pp}:pp'
\___ Bad modifier
...
After:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Duplicate modifier 'k' (kernel)
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Maximum precise value is 3
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' true
event syntax error: '..cycles:pp}:pp'
\___ Maximum combined precise value is 3, adding precision to "cycles:pp"
...
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Inline parse_events_evlist_error that is only used in
parse_events_error. Modify parse_events_error to not report a parser
error unless errors haven't already been reported. Make it clearer
that the latter case only happens for unrecognized input.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/xyz' true
event syntax error: '..les/period=99999999999999999999/xyz'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ Unrecognized input
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The helper function just wraps a splice and free. Making the free
inline removes a comment, so then it just wraps a splice which we can
make inline too.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was requested that RISC-V be able to add events to the perf tool so
the PMU driver didn't need to map legacy events to config encodings:
https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/
This change makes the priority of events specified without a PMU the
same as those specified with a PMU, namely sysfs and JSON events are
checked first before using the legacy encoding.
The hw_term is made more generic as a hardware_event that encodes a
pair of string and int value, allowing parse_events_multi_pmu_add to
fall back on a known encoding when the sysfs/JSON adding fails for
core events. As this covers PE_VALUE_SYM_HW, that token is removed and
related code simplified.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow the term list to be const so that other functions can pass const
term lists. Add const as necessary to called functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prior behavior is to not look for legacy cache names in sysfs/JSON and
to create events on all core PMUs. New behavior is to look for
sysfs/JSON events first on all PMUs, for core PMUs add a legacy event
if the sysfs/JSON event isn't present.
This is done so that there is consistency with how event names in
terms are handled and their prioritization of sysfs/JSON over
legacy. It may make sense to use a legacy cache event name as an event
name on a non-core PMU so we should allow it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move all implementation to pmu code. Don't allocate a fnmatch wildcard
pattern, matching ignoring the suffix already handles this, and only
use fnmatch if the given PMU name has a '*' in it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In parse_events_add_pmu, delay copying the list of terms until it is
known the list contains terms.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid passing the name of a PMU then finding it again, just directly
pass the PMU. parse_events_multi_pmu_add_or_add_pmu() is the only version
that needs to find a PMU, so move the find there. Remove the error
message as parse_events_multi_pmu_add_or_add_pmu will given an error at
the end when a name isn't either a PMU name or event name. Without the
error message being created the location in the input parameter (loc)
can be removed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out the case of an event or PMU name followed by a slash based
term list. This is with a view to sharing the code with new legacy
hardware parsing. Use early return to reduce indentation in the code.
Make parse_events_add_pmu static now it doesn't need sharing with
parse-events.y.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prior to this patch the first and the last error encountered during
parsing are printed. To see other errors verbose needs
enabling. Unfortunately this can drop useful errors, in particular on
terms. This patch changes the errors so that instead of the first and
last all errors are recorded and printed, the underlying data
structure is changed to a list.
Before:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
Initial error:
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
After:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
event syntax error: 'slots/edge=2/'
\___ value too big for format (edge), maximum is 1
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-3-irogers@google.com
|
|
The perf tool has previously made legacy events the priority so with
or without a PMU the legacy event would be opened:
$ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
After aliases, add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 833967 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
...
Fixes to make hybrid/BIG.little PMUs behave correctly, ie as core PMUs
capable of opening legacy events on each, removing hard coded "cpu_core"
and "cpu_atom" Intel PMU names, etc. caused a behavioral difference on
Apple/ARM due to latent issues in the PMU driver reported in:
https://lore.kernel.org/lkml/08f1f185-e259-4014-9ca4-6411d5c1bc65@marcan.st/
As part of that report Mark Rutland <mark.rutland@arm.com> requested
that legacy events not be higher in priority when a PMU is specified
reversing what has until this change been perf's default behavior. With
this change the above becomes:
$ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
Using CPUID GenuineIntel-6-8D-1
Attempt to add: cpu/cpu-cycles=0/
..after resolving event: cpu/event=0x3c/
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 827628 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 4 (PERF_TYPE_RAW)
size 136
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
...
So the second event has become a raw event as
/sys/devices/cpu/events/cpu-cycles exists.
A fix was necessary to config_term_pmu in parse-events.c as check_alias
expansion needs to happen after config_term_pmu, and config_term_pmu may
need calling a second time because of this.
config_term_pmu is updated to not use the legacy event when the PMU has
such a named event (either from JSON or sysfs).
The bulk of this change is updating all of the parse-events test
expectations so that if a sysfs/JSON event exists for a PMU the test
doesn't fail - a further sign, if it were needed, that the legacy event
priority was a known and tested behavior of the perf tool.
Reported-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231123042922.834425-1-irogers@google.com
[ Initialize the 'alias_rewrote_terms' variable to false to address a clang warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The default config is computed during creation of the PMU and may do
things like scanning sysfs, when the PMU may just be used as part of
scanning. Change default_config to perf_event_attr_init_default, a
callback that is used when a default config needs initializing. This
avoids holding onto the memory for a perf_event_attr and copying.
On a tigerlake laptop running the pmu-scan benchmark:
Before:
Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 28.780 usec (+- 0.503 usec)
Average PMU scanning took: 283.480 usec (+- 18.471 usec)
Number of openat syscalls: 30,227
After:
Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 27.880 usec (+- 0.169 usec)
Average PMU scanning took: 245.260 usec (+- 15.758 usec)
Number of openat syscalls: 28,914
Over 3 runs it is a nearly 12% reduction in execution time and a 4.3%
of openat calls.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add missing free on an error path as detected by clang-tidy.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-16-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
parse_events_terms() existed in function names but was passed a
'struct list_head'.
As many parse_events functions take an evsel_config list as well as a
parse_event_term list, and the naming head_terms and head_config is
inconsistent, there's a potential to switch the lists and get errors.
Introduce a 'struct parse_events_terms', that just wraps a list_head, to
avoid this. Add the regular init/exit functions and transition the code
to use them.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When trying to add events to multiple PMUs the term list is copied first
as adding the event will rewrite the event's name term into the sysfs
and/or json encoding terms (see perf_pmu__check_alias).
Change the parse events add API so the passed in term list is const,
then copy the list when modification is necessary.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a const and rename str to event_name.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The parameter head_terms is always used in get_config_terms.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A term may have no value in which case it is assumed to have a value
of 1. It doesn't just apply to alias/event terms so change the
parse_events_term__to_strbuf assert.
Commit 99e7138eb7897aa0 ("perf tools: Fail on using multiple bits long
terms without value") made it so that no_value terms could only be for a
single bit. Prior to commit 64199ae4b8a3 ("perf parse-events: Fix
propagation of term's no_value when cloning") this missed a test case
where config1 had no_value.
Fixes: 64199ae4b8a36038 ("perf parse-events: Fix propagation of term's no_value when cloning")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The no_value field in 'struct parse_events_term' indicates that the val
variable isn't used, the case for an event name.
Cloning wasn't propagating this, making cloned event name terms
appearing to have a constant assinged to them.
Working around the bug would check for a value of 1 assigned to value,
but then this meant a user value of 1 couldn't be differentiated causing
the value to be lost in debug printing and perf list.
The change fixes the cloning and updates the "val.num ==/!= 1" tests to
use no_value instead.
To better check the no_value is set appropriately parameter comments are
added for constant values.
This found that no_value wasn't set correctly in parse_events_multi_pmu_add,
which matters now that no_value is used to indicate an event name.
Fixes: 7a6e91644708d514 ("perf parse-events: Make common term list to strbuf helper")
Fixes: 99e7138eb7897aa0 ("perf tools: Fail on using multiple bits long terms without value")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831071421.2201358-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Name the enums used by 'struct parse_events_term' to
parse_events__term_val_type and parse_events__term_type.
This allows greater compile time error checking.
Fix -Wswitch related issues by explicitly listing all enum values prior
to default.
Add config_term_name to safely look up a parse_events__term_type name,
bounds checking the array access first.
Add documentation to 'struct parse_events_terms' and reorder to save
space.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230831071421.2201358-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A term list is turned into a string for debug output and for the str
value in the alias.
Add a helper to do this based on existing code, but then fix for
situations like events being identified.
Use strbuf to manage the dynamic memory allocation and remove the 256
byte limit.
Use in various places the string of the term list is required.
Before:
$ sudo perf stat -vv -e inst_retired.any true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'cpu' with 'inst_retired.any,' that may result in non-fatal errors
After aliases, add event pmu 'cpu' with 'event,period,' that may result in non-fatal errors
inst_retired.any -> cpu/inst_retired.any/
...
After:
$ sudo perf stat -vv -e inst_retired.any true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempt to add: cpu/inst_retired.any/
..after resolving event: cpu/event=0xc0,period=0x1e8483/
inst_retired.any -> cpu/event=0xc0,period=0x1e8483/
...
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830070753.1821629-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This avoids casts in tests. Use zfree in a few places to avoid
warnings about a freeing a const pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The PMU name could be NULL in the case of the fake_pmu. Initialize the
name for the fake_pmu to "fake" so that all other logic can assume it
is initialized. Add a const to the type of name so that a literal can
be used to avoid additional initialization code. Propagate the cost
through related routines and remove now unnecessary "(char *)"
casts. Doing this located a bug in builtin-list for the pmu_glob that
was missing a strdup.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230825024002.801955-3-irogers@google.com
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rather than read a sysfs events file into a 256 byte char buffer, pass
the FILE* directly to the lex/yacc parser.
This avoids there being a maximum events file size.
While changing the API, constify some arguments to remove unnecessary
casts.
Allocating the read buffer decreases the performance of pmu-scan by
around 3%.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Double setting information for an event would produce an error message
associated with the PMU rather than the term that was double setting.
Improve the error message to be on the term.
Before:
$ perf stat -e 'cpu/inst_retired.any,inst_retired.any/' true
event syntax error: 'cpu/inst_retired.any,inst_retired.any/'
\___ Bad event or PMU
Unabled to find PMU or event on a PMU of 'cpu'
Run 'perf list' for a list of valid events
$
After:
$ perf stat -e 'cpu/inst_retired.any,inst_retired.any/' true
event syntax error: '..etired.any,inst_retired.any/'
\___ Bad event or PMU
Unabled to find PMU or event on a PMU of 'cpu'
Initial error:
event syntax error: '..etired.any,inst_retired.any/'
\___ Attempt to set event's scale twice
Run 'perf list' for a list of valid events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order to be able to lazily compute aliases/events for a PMU, move
the struct perf_pmu_alias into pmu.c.
Add perf_pmu__find_event and perf_pmu__for_each_event that take a
callback that is called for the found event or for each event.
The layout of struct pmu and the event/alias list is unchanged but the
API is altered so that aliases are no longer directly accessed, allowing
for later changes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pass the PMU so the format list can be better abstracted and later
lazily loaded.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-8-irogers@google.com
[ Did missing conversions in tools/perf/arch/arm*/util/cs-etm.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pass the pmu so the format list can be better abstracted and later
lazily loaded.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
