1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
|
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip KSZ Series Ethernet switches
maintainers:
- Marek Vasut <marex@denx.de>
- Woojung Huh <Woojung.Huh@microchip.com>
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
# See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
# required and optional properties.
compatible:
enum:
- microchip,ksz8765
- microchip,ksz8794
- microchip,ksz8795
- microchip,ksz8863
- microchip,ksz8864 # 4-port version of KSZ8895 family switch
- microchip,ksz8873
- microchip,ksz8895 # 5-port version of KSZ8895 family switch
- microchip,ksz9477
- microchip,ksz9897
- microchip,ksz9896
- microchip,ksz9567
- microchip,ksz8565
- microchip,ksz9893
- microchip,ksz9563
- microchip,ksz8563
- microchip,ksz8567
reset-gpios:
description:
Should be a gpio specifier for a reset line.
maxItems: 1
wakeup-source: true
microchip,synclko-125:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
microchip,synclko-disable:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set if the output SYNCLKO clock should be disabled. Do not mix with
microchip,synclko-125.
microchip,pme-active-high:
$ref: /schemas/types.yaml#/definitions/flag
description:
Indicates if the PME pin polarity is active-high.
microchip,io-drive-strength-microamp:
description:
IO Pad Drive Strength
enum: [8000, 16000]
default: 16000
microchip,hi-drive-strength-microamp:
description:
High Speed Drive Strength. Controls drive strength of GMII / RGMII /
MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines.
enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000]
default: 24000
microchip,lo-drive-strength-microamp:
description:
Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI,
COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines.
enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000]
default: 8000
interrupts:
maxItems: 1
required:
- compatible
- reg
if:
not:
properties:
compatible:
enum:
- microchip,ksz8863
- microchip,ksz8873
then:
$ref: dsa.yaml#/$defs/ethernet-ports
else:
patternProperties:
"^(ethernet-)?ports$":
patternProperties:
"^(ethernet-)?port@[0-2]$":
$ref: dsa-port.yaml#
unevaluatedProperties: false
properties:
microchip,rmii-clk-internal:
$ref: /schemas/types.yaml#/definitions/flag
description:
When ksz88x3 is acting as clock provier (via REFCLKO) it
can select between internal and external RMII reference
clock. Internal reference clock means that the clock for
the RMII of ksz88x3 is provided by the ksz88x3 internally
and the REFCLKI pin is unconnected. For the external
reference clock, the clock needs to be fed back to ksz88x3
via REFCLKI.
If microchip,rmii-clk-internal is set, ksz88x3 will provide
rmii reference clock internally, otherwise reference clock
should be provided externally.
dependencies:
microchip,rmii-clk-internal: [ethernet]
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
// Ethernet switch connected via SPI to the host, CPU port wired to eth0:
eth0 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
spi {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pinctrl_spi_ksz>;
cs-gpios = <&pioC 25 0>;
id = <1>;
ksz9477: switch@0 {
compatible = "microchip,ksz9477";
reg = <0>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
spi-max-frequency = <44000000>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "lan5";
};
port@5 {
reg = <5>;
ethernet = <ð0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
ksz8565: switch@1 {
compatible = "microchip,ksz8565";
reg = <1>;
spi-max-frequency = <44000000>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@6 {
reg = <6>;
ethernet = <ð0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
...
|
