1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* GPIO driver for the ACCES 104-DIO-48E series
* Copyright (C) 2016 William Breathitt Gray
*
* This driver supports the following ACCES devices: 104-DIO-48E and
* 104-DIO-24E.
*/
#include <linux/bits.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/isa.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/regmap.h>
#include <linux/types.h>
#include "gpio-i8255.h"
MODULE_IMPORT_NS(I8255);
#define DIO48E_EXTENT 16
#define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT)
static unsigned int base[MAX_NUM_DIO48E];
static unsigned int num_dio48e;
module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
static unsigned int irq[MAX_NUM_DIO48E];
static unsigned int num_irq;
module_param_hw_array(irq, uint, irq, &num_irq, 0);
MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
#define DIO48E_ENABLE_INTERRUPT 0xB
#define DIO48E_DISABLE_INTERRUPT DIO48E_ENABLE_INTERRUPT
#define DIO48E_CLEAR_INTERRUPT 0xF
#define DIO48E_NUM_PPI 2
static const struct regmap_range dio48e_wr_ranges[] = {
regmap_reg_range(0x0, 0x9), regmap_reg_range(0xB, 0xB),
regmap_reg_range(0xD, 0xD), regmap_reg_range(0xF, 0xF),
};
static const struct regmap_range dio48e_rd_ranges[] = {
regmap_reg_range(0x0, 0x2), regmap_reg_range(0x4, 0x6),
regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD),
regmap_reg_range(0xF, 0xF),
};
static const struct regmap_range dio48e_volatile_ranges[] = {
i8255_volatile_regmap_range(0x0), i8255_volatile_regmap_range(0x4),
regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD),
regmap_reg_range(0xF, 0xF),
};
static const struct regmap_range dio48e_precious_ranges[] = {
regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD),
regmap_reg_range(0xF, 0xF),
};
static const struct regmap_access_table dio48e_wr_table = {
.yes_ranges = dio48e_wr_ranges,
.n_yes_ranges = ARRAY_SIZE(dio48e_wr_ranges),
};
static const struct regmap_access_table dio48e_rd_table = {
.yes_ranges = dio48e_rd_ranges,
.n_yes_ranges = ARRAY_SIZE(dio48e_rd_ranges),
};
static const struct regmap_access_table dio48e_volatile_table = {
.yes_ranges = dio48e_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(dio48e_volatile_ranges),
};
static const struct regmap_access_table dio48e_precious_table = {
.yes_ranges = dio48e_precious_ranges,
.n_yes_ranges = ARRAY_SIZE(dio48e_precious_ranges),
};
static const struct regmap_config dio48e_regmap_config = {
.reg_bits = 8,
.reg_stride = 1,
.val_bits = 8,
.io_port = true,
.max_register = 0xF,
.wr_table = &dio48e_wr_table,
.rd_table = &dio48e_rd_table,
.volatile_table = &dio48e_volatile_table,
.precious_table = &dio48e_precious_table,
.cache_type = REGCACHE_FLAT,
};
/* only bit 3 on each respective Port C supports interrupts */
#define DIO48E_REGMAP_IRQ(_ppi) \
[19 + (_ppi) * 24] = { \
.mask = BIT(_ppi), \
.type = { .types_supported = IRQ_TYPE_EDGE_RISING }, \
}
static const struct regmap_irq dio48e_regmap_irqs[] = {
DIO48E_REGMAP_IRQ(0), DIO48E_REGMAP_IRQ(1),
};
static int dio48e_handle_mask_sync(struct regmap *const map, const int index,
const unsigned int mask_buf_def,
const unsigned int mask_buf,
void *const irq_drv_data)
{
unsigned int *const irq_mask = irq_drv_data;
const unsigned int prev_mask = *irq_mask;
int err;
unsigned int val;
/* exit early if no change since the previous mask */
if (mask_buf == prev_mask)
return 0;
/* remember the current mask for the next mask sync */
*irq_mask = mask_buf;
/* if all previously masked, enable interrupts when unmasking */
if (prev_mask == mask_buf_def) {
err = regmap_write(map, DIO48E_CLEAR_INTERRUPT, 0x00);
if (err)
return err;
return regmap_write(map, DIO48E_ENABLE_INTERRUPT, 0x00);
}
/* if all are currently masked, disable interrupts */
if (mask_buf == mask_buf_def)
return regmap_read(map, DIO48E_DISABLE_INTERRUPT, &val);
return 0;
}
#define DIO48E_NGPIO 48
static const char *dio48e_names[DIO48E_NGPIO] = {
"PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2",
"PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5",
"PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0",
"PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3",
"PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6",
"PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1",
"PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4",
"PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7",
"PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2",
"PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5",
"PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0",
"PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3",
"PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6",
"PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1",
"PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4",
"PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7"
};
static int dio48e_irq_init_hw(struct regmap *const map)
{
unsigned int val;
/* Disable IRQ by default */
return regmap_read(map, DIO48E_DISABLE_INTERRUPT, &val);
}
static int dio48e_probe(struct device *dev, unsigned int id)
{
const char *const name = dev_name(dev);
struct i8255_regmap_config config = {};
void __iomem *regs;
struct regmap *map;
int err;
struct regmap_irq_chip *chip;
unsigned int irq_mask;
struct regmap_irq_chip_data *chip_data;
if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) {
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
base[id], base[id] + DIO48E_EXTENT);
return -EBUSY;
}
regs = devm_ioport_map(dev, base[id], DIO48E_EXTENT);
if (!regs)
return -ENOMEM;
map = devm_regmap_init_mmio(dev, regs, &dio48e_regmap_config);
if (IS_ERR(map))
return dev_err_probe(dev, PTR_ERR(map),
"Unable to initialize register map\n");
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->irq_drv_data = devm_kzalloc(dev, sizeof(irq_mask), GFP_KERNEL);
if (!chip->irq_drv_data)
return -ENOMEM;
chip->name = name;
/* No IRQ status register so use CLEAR_INTERRUPT register instead */
chip->status_base = DIO48E_CLEAR_INTERRUPT;
chip->mask_base = DIO48E_ENABLE_INTERRUPT;
chip->ack_base = DIO48E_CLEAR_INTERRUPT;
/* CLEAR_INTERRUPT doubles as status register so we need it cleared */
chip->clear_ack = true;
chip->status_invert = true;
chip->num_regs = 1;
chip->irqs = dio48e_regmap_irqs;
chip->num_irqs = ARRAY_SIZE(dio48e_regmap_irqs);
chip->handle_mask_sync = dio48e_handle_mask_sync;
/* Initialize to prevent spurious interrupts before we're ready */
err = dio48e_irq_init_hw(map);
if (err)
return err;
err = devm_regmap_add_irq_chip(dev, map, irq[id], 0, 0, chip, &chip_data);
if (err)
return dev_err_probe(dev, err, "IRQ registration failed\n");
config.parent = dev;
config.map = map;
config.num_ppi = DIO48E_NUM_PPI;
config.names = dio48e_names;
config.domain = regmap_irq_get_domain(chip_data);
return devm_i8255_regmap_register(dev, &config);
}
static struct isa_driver dio48e_driver = {
.probe = dio48e_probe,
.driver = {
.name = "104-dio-48e"
},
};
module_isa_driver_with_irq(dio48e_driver, num_dio48e, num_irq);
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver");
MODULE_LICENSE("GPL v2");
|
