1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware monitoring driver for BluTek BPA-RS600 Power Supplies
*
* Copyright 2021 Allied Telesis Labs
*/
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pmbus.h>
#include "pmbus.h"
enum chips { bpa_rs600, bpd_rs600 };
static int bpa_rs600_read_byte_data(struct i2c_client *client, int page, int reg)
{
int ret;
if (page > 0)
return -ENXIO;
switch (reg) {
case PMBUS_FAN_CONFIG_12:
/*
* Two fans are reported in PMBUS_FAN_CONFIG_12 but there is
* only one fan in the module. Mask out the FAN2 bits.
*/
ret = pmbus_read_byte_data(client, 0, PMBUS_FAN_CONFIG_12);
if (ret >= 0)
ret &= ~(PB_FAN_2_INSTALLED | PB_FAN_2_PULSE_MASK);
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
/*
* The BPA-RS600 violates the PMBus spec. Specifically it treats the
* mantissa as unsigned. Deal with this here to allow the PMBus core
* to work with correctly encoded data.
*/
static int bpa_rs600_read_vin(struct i2c_client *client)
{
int ret, exponent, mantissa;
ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_READ_VIN);
if (ret < 0)
return ret;
if (ret & BIT(10)) {
exponent = ret >> 11;
mantissa = ret & 0x7ff;
exponent++;
mantissa >>= 1;
ret = (exponent << 11) | mantissa;
}
return ret;
}
/*
* Firmware V5.70 incorrectly reports 1640W for MFR_PIN_MAX.
* Deal with this by returning a sensible value.
*/
static int bpa_rs600_read_pin_max(struct i2c_client *client)
{
int ret;
ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_MFR_PIN_MAX);
if (ret < 0)
return ret;
/* Detect invalid 1640W (linear encoding) */
if (ret == 0x0b34)
/* Report 700W (linear encoding) */
return 0x095e;
return ret;
}
static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int phase, int reg)
{
int ret;
if (page > 0)
return -ENXIO;
switch (reg) {
case PMBUS_VIN_UV_WARN_LIMIT:
case PMBUS_VIN_OV_WARN_LIMIT:
case PMBUS_VOUT_UV_WARN_LIMIT:
case PMBUS_VOUT_OV_WARN_LIMIT:
case PMBUS_IIN_OC_WARN_LIMIT:
case PMBUS_IOUT_OC_WARN_LIMIT:
case PMBUS_PIN_OP_WARN_LIMIT:
case PMBUS_POUT_OP_WARN_LIMIT:
case PMBUS_VIN_UV_FAULT_LIMIT:
case PMBUS_VIN_OV_FAULT_LIMIT:
case PMBUS_VOUT_UV_FAULT_LIMIT:
case PMBUS_VOUT_OV_FAULT_LIMIT:
/* These commands return data but it is invalid/un-documented */
ret = -ENXIO;
break;
case PMBUS_READ_VIN:
ret = bpa_rs600_read_vin(client);
break;
case PMBUS_MFR_PIN_MAX:
ret = bpa_rs600_read_pin_max(client);
break;
default:
if (reg >= PMBUS_VIRT_BASE)
ret = -ENXIO;
else
ret = -ENODATA;
break;
}
return ret;
}
static struct pmbus_driver_info bpa_rs600_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = linear,
.format[PSC_CURRENT_IN] = linear,
.format[PSC_CURRENT_OUT] = linear,
.format[PSC_POWER] = linear,
.format[PSC_TEMPERATURE] = linear,
.format[PSC_FAN] = linear,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT |
PMBUS_HAVE_PIN | PMBUS_HAVE_POUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
PMBUS_HAVE_FAN12 |
PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
PMBUS_HAVE_STATUS_FAN12,
.read_byte_data = bpa_rs600_read_byte_data,
.read_word_data = bpa_rs600_read_word_data,
};
static const struct i2c_device_id bpa_rs600_id[] = {
{ "bpa-rs600", bpa_rs600 },
{ "bpd-rs600", bpd_rs600 },
{},
};
MODULE_DEVICE_TABLE(i2c, bpa_rs600_id);
static int bpa_rs600_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
int ret;
const struct i2c_device_id *mid;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA
| I2C_FUNC_SMBUS_READ_WORD_DATA
| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
return -ENODEV;
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
if (ret < 0) {
dev_err(dev, "Failed to read Manufacturer Model\n");
return ret;
}
for (mid = bpa_rs600_id; mid->name[0]; mid++) {
if (!strncasecmp(buf, mid->name, strlen(mid->name)))
break;
}
if (!mid->name[0]) {
buf[ret] = '\0';
dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
return -ENODEV;
}
return pmbus_do_probe(client, &bpa_rs600_info);
}
static const struct of_device_id __maybe_unused bpa_rs600_of_match[] = {
{ .compatible = "blutek,bpa-rs600" },
{},
};
MODULE_DEVICE_TABLE(of, bpa_rs600_of_match);
static struct i2c_driver bpa_rs600_driver = {
.driver = {
.name = "bpa-rs600",
.of_match_table = of_match_ptr(bpa_rs600_of_match),
},
.probe = bpa_rs600_probe,
.id_table = bpa_rs600_id,
};
module_i2c_driver(bpa_rs600_driver);
MODULE_AUTHOR("Chris Packham");
MODULE_DESCRIPTION("PMBus driver for BluTek BPA-RS600");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS("PMBUS");
|
