1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2020 InvenSense, Inc.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/property.h>
#include "inv_icm42600.h"
static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st)
{
unsigned int mask, val;
int ret;
/*
* setup interface registers
* This register write to REG_INTF_CONFIG6 enables a spike filter that
* is impacting the line and can prevent the I2C ACK to be seen by the
* controller. So we don't test the return value.
*/
regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
INV_ICM42600_INTF_CONFIG6_MASK,
INV_ICM42600_INTF_CONFIG6_I3C_EN);
ret = regmap_clear_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY);
if (ret)
return ret;
/* set slew rates for I2C and SPI */
mask = INV_ICM42600_DRIVE_CONFIG_I2C_MASK |
INV_ICM42600_DRIVE_CONFIG_SPI_MASK;
val = INV_ICM42600_DRIVE_CONFIG_I2C(INV_ICM42600_SLEW_RATE_12_36NS) |
INV_ICM42600_DRIVE_CONFIG_SPI(INV_ICM42600_SLEW_RATE_12_36NS);
ret = regmap_update_bits(st->map, INV_ICM42600_REG_DRIVE_CONFIG,
mask, val);
if (ret)
return ret;
/* disable SPI bus */
return regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0,
INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_MASK,
INV_ICM42600_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS);
}
static int inv_icm42600_probe(struct i2c_client *client)
{
const void *match;
enum inv_icm42600_chip chip;
struct regmap *regmap;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
return -ENOTSUPP;
match = device_get_match_data(&client->dev);
if (!match)
return -EINVAL;
chip = (uintptr_t)match;
regmap = devm_regmap_init_i2c(client, &inv_icm42600_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
return inv_icm42600_core_probe(regmap, chip, client->irq,
inv_icm42600_i2c_bus_setup);
}
/*
* device id table is used to identify what device can be
* supported by this driver
*/
static const struct i2c_device_id inv_icm42600_id[] = {
{ "icm42600", INV_CHIP_ICM42600 },
{ "icm42602", INV_CHIP_ICM42602 },
{ "icm42605", INV_CHIP_ICM42605 },
{ "icm42686", INV_CHIP_ICM42686 },
{ "icm42622", INV_CHIP_ICM42622 },
{ "icm42688", INV_CHIP_ICM42688 },
{ "icm42631", INV_CHIP_ICM42631 },
{ }
};
MODULE_DEVICE_TABLE(i2c, inv_icm42600_id);
static const struct of_device_id inv_icm42600_of_matches[] = {
{
.compatible = "invensense,icm42600",
.data = (void *)INV_CHIP_ICM42600,
}, {
.compatible = "invensense,icm42602",
.data = (void *)INV_CHIP_ICM42602,
}, {
.compatible = "invensense,icm42605",
.data = (void *)INV_CHIP_ICM42605,
}, {
.compatible = "invensense,icm42686",
.data = (void *)INV_CHIP_ICM42686,
}, {
.compatible = "invensense,icm42622",
.data = (void *)INV_CHIP_ICM42622,
}, {
.compatible = "invensense,icm42688",
.data = (void *)INV_CHIP_ICM42688,
}, {
.compatible = "invensense,icm42631",
.data = (void *)INV_CHIP_ICM42631,
},
{}
};
MODULE_DEVICE_TABLE(of, inv_icm42600_of_matches);
static struct i2c_driver inv_icm42600_driver = {
.driver = {
.name = "inv-icm42600-i2c",
.of_match_table = inv_icm42600_of_matches,
.pm = pm_ptr(&inv_icm42600_pm_ops),
},
.id_table = inv_icm42600_id,
.probe = inv_icm42600_probe,
};
module_i2c_driver(inv_icm42600_driver);
MODULE_AUTHOR("InvenSense, Inc.");
MODULE_DESCRIPTION("InvenSense ICM-426xx I2C driver");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(IIO_ICM42600);
|
