1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* SPI interface for the BMP280 driver
*
* Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c
*/
#include <linux/bits.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include "bmp280.h"
static int bmp280_regmap_spi_write(void *context, const void *data,
size_t count)
{
struct spi_device *spi = to_spi_device(context);
u8 buf[2];
memcpy(buf, data, 2);
/*
* The SPI register address (= full register address without bit 7) and
* the write command (bit7 = RW = '0')
*/
buf[0] &= ~0x80;
return spi_write_then_read(spi, buf, 2, NULL, 0);
}
static int bmp280_regmap_spi_read(void *context, const void *reg,
size_t reg_size, void *val, size_t val_size)
{
struct spi_device *spi = to_spi_device(context);
return spi_write_then_read(spi, reg, reg_size, val, val_size);
}
static int bmp380_regmap_spi_read(void *context, const void *reg,
size_t reg_size, void *val, size_t val_size)
{
struct spi_device *spi = to_spi_device(context);
u8 rx_buf[BME280_BURST_READ_BYTES + 1];
ssize_t status;
if (val_size > BME280_BURST_READ_BYTES)
return -EINVAL;
/*
* According to the BMP3xx datasheets, for a basic SPI read opertion,
* the first byte needs to be dropped and the rest are the requested
* data.
*/
status = spi_write_then_read(spi, reg, 1, rx_buf, val_size + 1);
if (status)
return status;
memcpy(val, rx_buf + 1, val_size);
return 0;
}
static const struct regmap_bus bmp280_regmap_bus = {
.write = bmp280_regmap_spi_write,
.read = bmp280_regmap_spi_read,
.reg_format_endian_default = REGMAP_ENDIAN_BIG,
.val_format_endian_default = REGMAP_ENDIAN_BIG,
};
static const struct regmap_bus bmp380_regmap_bus = {
.write = bmp280_regmap_spi_write,
.read = bmp380_regmap_spi_read,
.read_flag_mask = BIT(7),
.reg_format_endian_default = REGMAP_ENDIAN_BIG,
.val_format_endian_default = REGMAP_ENDIAN_BIG,
};
static int bmp280_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
const struct bmp280_chip_info *chip_info;
struct regmap_bus const *bmp_regmap_bus;
struct regmap *regmap;
int ret;
spi->bits_per_word = 8;
ret = spi_setup(spi);
if (ret < 0) {
dev_err(&spi->dev, "spi_setup failed!\n");
return ret;
}
chip_info = spi_get_device_match_data(spi);
if (chip_info->spi_read_extra_byte)
bmp_regmap_bus = &bmp380_regmap_bus;
else
bmp_regmap_bus = &bmp280_regmap_bus;
regmap = devm_regmap_init(&spi->dev,
bmp_regmap_bus,
&spi->dev,
chip_info->regmap_config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "failed to allocate register map\n");
return PTR_ERR(regmap);
}
return bmp280_common_probe(&spi->dev,
regmap,
chip_info,
id->name,
spi->irq);
}
static const struct of_device_id bmp280_of_spi_match[] = {
{ .compatible = "bosch,bmp085", .data = &bmp085_chip_info },
{ .compatible = "bosch,bmp180", .data = &bmp180_chip_info },
{ .compatible = "bosch,bmp181", .data = &bmp180_chip_info },
{ .compatible = "bosch,bmp280", .data = &bmp280_chip_info },
{ .compatible = "bosch,bme280", .data = &bme280_chip_info },
{ .compatible = "bosch,bmp380", .data = &bmp380_chip_info },
{ .compatible = "bosch,bmp580", .data = &bmp580_chip_info },
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
static const struct spi_device_id bmp280_spi_id[] = {
{ "bmp085", (kernel_ulong_t)&bmp085_chip_info },
{ "bmp180", (kernel_ulong_t)&bmp180_chip_info },
{ "bmp181", (kernel_ulong_t)&bmp180_chip_info },
{ "bmp280", (kernel_ulong_t)&bmp280_chip_info },
{ "bme280", (kernel_ulong_t)&bme280_chip_info },
{ "bmp380", (kernel_ulong_t)&bmp380_chip_info },
{ "bmp580", (kernel_ulong_t)&bmp580_chip_info },
{ }
};
MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
static struct spi_driver bmp280_spi_driver = {
.driver = {
.name = "bmp280",
.of_match_table = bmp280_of_spi_match,
.pm = pm_ptr(&bmp280_dev_pm_ops),
},
.id_table = bmp280_spi_id,
.probe = bmp280_spi_probe,
};
module_spi_driver(bmp280_spi_driver);
MODULE_DESCRIPTION("BMP280 SPI bus driver");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(IIO_BMP280);
|
