1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
|
// SPDX-License-Identifier: GPL-2.0+
/* Realtek MDIO interface driver
*
* ASICs we intend to support with this driver:
*
* RTL8366 - The original version, apparently
* RTL8369 - Similar enough to have the same datsheet as RTL8366
* RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
* different register layout from the other two
* RTL8366S - Is this "RTL8366 super"?
* RTL8367 - Has an OpenWRT driver as well
* RTL8368S - Seems to be an alternative name for RTL8366RB
* RTL8370 - Also uses SMI
*
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
* Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
* Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
* Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/overflow.h>
#include <linux/regmap.h>
#include "realtek.h"
#include "realtek-mdio.h"
#include "rtl83xx.h"
/* Read/write via mdiobus */
#define REALTEK_MDIO_CTRL0_REG 31
#define REALTEK_MDIO_START_REG 29
#define REALTEK_MDIO_CTRL1_REG 21
#define REALTEK_MDIO_ADDRESS_REG 23
#define REALTEK_MDIO_DATA_WRITE_REG 24
#define REALTEK_MDIO_DATA_READ_REG 25
#define REALTEK_MDIO_START_OP 0xFFFF
#define REALTEK_MDIO_ADDR_OP 0x000E
#define REALTEK_MDIO_READ_OP 0x0001
#define REALTEK_MDIO_WRITE_OP 0x0003
static int realtek_mdio_write(void *ctx, u32 reg, u32 val)
{
struct realtek_priv *priv = ctx;
struct mii_bus *bus = priv->bus;
int ret;
mutex_lock(&bus->mdio_lock);
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP);
out_unlock:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
{
struct realtek_priv *priv = ctx;
struct mii_bus *bus = priv->bus;
int ret;
mutex_lock(&bus->mdio_lock);
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
if (ret)
goto out_unlock;
ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP);
if (ret)
goto out_unlock;
ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG);
if (ret >= 0) {
*val = ret;
ret = 0;
}
out_unlock:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static const struct realtek_interface_info realtek_mdio_info = {
.reg_read = realtek_mdio_read,
.reg_write = realtek_mdio_write,
};
/**
* realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch
* @mdiodev: mdio_device to probe on.
*
* This function should be used as the .probe in an mdio_driver. After
* calling the common probe function for both interfaces, it initializes the
* values specific for MDIO-connected devices. Finally, it calls a common
* function to register the DSA switch.
*
* Context: Can sleep. Takes and releases priv->map_lock.
* Return: Returns 0 on success, a negative error on failure.
*/
int realtek_mdio_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
struct realtek_priv *priv;
int ret;
priv = rtl83xx_probe(dev, &realtek_mdio_info);
if (IS_ERR(priv))
return PTR_ERR(priv);
priv->bus = mdiodev->bus;
priv->mdio_addr = mdiodev->addr;
priv->write_reg_noack = realtek_mdio_write;
ret = rtl83xx_register_switch(priv);
if (ret) {
rtl83xx_remove(priv);
return ret;
}
return 0;
}
EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA);
/**
* realtek_mdio_remove() - Remove the driver of an MDIO-connected switch
* @mdiodev: mdio_device to be removed.
*
* This function should be used as the .remove in an mdio_driver. First
* it unregisters the DSA switch and then it calls the common remove function.
*
* Context: Can sleep.
* Return: Nothing.
*/
void realtek_mdio_remove(struct mdio_device *mdiodev)
{
struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
rtl83xx_unregister_switch(priv);
rtl83xx_remove(priv);
}
EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA);
/**
* realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch
* @mdiodev: mdio_device shutting down.
*
* This function should be used as the .shutdown in a platform_driver. It calls
* the common shutdown function.
*
* Context: Can sleep.
* Return: Nothing.
*/
void realtek_mdio_shutdown(struct mdio_device *mdiodev)
{
struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
rtl83xx_shutdown(priv);
}
EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA);
|
