1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2005-2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Luotao Fu, kernel@pengutronix.de
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/ktime.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/w1.h>
/*
* MXC W1 Register offsets
*/
#define MXC_W1_CONTROL 0x00
# define MXC_W1_CONTROL_RDST BIT(3)
# define MXC_W1_CONTROL_WR(x) BIT(5 - (x))
# define MXC_W1_CONTROL_PST BIT(6)
# define MXC_W1_CONTROL_RPP BIT(7)
#define MXC_W1_TIME_DIVIDER 0x02
#define MXC_W1_RESET 0x04
# define MXC_W1_RESET_RST BIT(0)
struct mxc_w1_device {
void __iomem *regs;
struct clk *clk;
struct w1_bus_master bus_master;
};
/*
* this is the low level routine to
* reset the device on the One Wire interface
* on the hardware
*/
static u8 mxc_w1_ds2_reset_bus(void *data)
{
struct mxc_w1_device *dev = data;
ktime_t timeout;
writeb(MXC_W1_CONTROL_RPP, dev->regs + MXC_W1_CONTROL);
/* Wait for reset sequence 511+512us, use 1500us for sure */
timeout = ktime_add_us(ktime_get(), 1500);
udelay(511 + 512);
do {
u8 ctrl = readb(dev->regs + MXC_W1_CONTROL);
/* PST bit is valid after the RPP bit is self-cleared */
if (!(ctrl & MXC_W1_CONTROL_RPP))
return !(ctrl & MXC_W1_CONTROL_PST);
} while (ktime_before(ktime_get(), timeout));
return 1;
}
/*
* this is the low level routine to read/write a bit on the One Wire
* interface on the hardware. It does write 0 if parameter bit is set
* to 0, otherwise a write 1/read.
*/
static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
{
struct mxc_w1_device *dev = data;
ktime_t timeout;
writeb(MXC_W1_CONTROL_WR(bit), dev->regs + MXC_W1_CONTROL);
/* Wait for read/write bit (60us, Max 120us), use 200us for sure */
timeout = ktime_add_us(ktime_get(), 200);
udelay(60);
do {
u8 ctrl = readb(dev->regs + MXC_W1_CONTROL);
/* RDST bit is valid after the WR1/RD bit is self-cleared */
if (!(ctrl & MXC_W1_CONTROL_WR(bit)))
return !!(ctrl & MXC_W1_CONTROL_RDST);
} while (ktime_before(ktime_get(), timeout));
return 0;
}
static int mxc_w1_probe(struct platform_device *pdev)
{
struct mxc_w1_device *mdev;
unsigned long clkrate;
unsigned int clkdiv;
int err;
mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device),
GFP_KERNEL);
if (!mdev)
return -ENOMEM;
mdev->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(mdev->clk))
return PTR_ERR(mdev->clk);
err = clk_prepare_enable(mdev->clk);
if (err)
return err;
clkrate = clk_get_rate(mdev->clk);
if (clkrate < 10000000)
dev_warn(&pdev->dev,
"Low clock frequency causes improper function\n");
clkdiv = DIV_ROUND_CLOSEST(clkrate, 1000000);
clkrate /= clkdiv;
if ((clkrate < 980000) || (clkrate > 1020000))
dev_warn(&pdev->dev,
"Incorrect time base frequency %lu Hz\n", clkrate);
mdev->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mdev->regs)) {
err = PTR_ERR(mdev->regs);
goto out_disable_clk;
}
/* Software reset 1-Wire module */
writeb(MXC_W1_RESET_RST, mdev->regs + MXC_W1_RESET);
writeb(0, mdev->regs + MXC_W1_RESET);
writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
mdev->bus_master.data = mdev;
mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit;
platform_set_drvdata(pdev, mdev);
err = w1_add_master_device(&mdev->bus_master);
if (err)
goto out_disable_clk;
return 0;
out_disable_clk:
clk_disable_unprepare(mdev->clk);
return err;
}
/*
* disassociate the w1 device from the driver
*/
static void mxc_w1_remove(struct platform_device *pdev)
{
struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
w1_remove_master_device(&mdev->bus_master);
clk_disable_unprepare(mdev->clk);
}
static const struct of_device_id mxc_w1_dt_ids[] = {
{ .compatible = "fsl,imx21-owire" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
static struct platform_driver mxc_w1_driver = {
.driver = {
.name = "mxc_w1",
.of_match_table = mxc_w1_dt_ids,
},
.probe = mxc_w1_probe,
.remove = mxc_w1_remove,
};
module_platform_driver(mxc_w1_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Freescale Semiconductors Inc");
MODULE_DESCRIPTION("Driver for One-Wire on MXC");
|
