1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
|
// SPDX-License-Identifier: GPL-2.0
/*
* Renesas RZ/N1 Watchdog timer.
* This is a 12-bit timer driver from a (62.5/16384) MHz clock. It can't even
* cope with 2 seconds.
*
* Copyright 2018 Renesas Electronics Europe Ltd.
*
* Derived from Ralink RT288x watchdog timer.
*/
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/watchdog.h>
#define DEFAULT_TIMEOUT 60
#define RZN1_WDT_RETRIGGER 0x0
#define RZN1_WDT_RETRIGGER_RELOAD_VAL 0
#define RZN1_WDT_RETRIGGER_RELOAD_VAL_MASK 0xfff
#define RZN1_WDT_RETRIGGER_PRESCALE BIT(12)
#define RZN1_WDT_RETRIGGER_ENABLE BIT(13)
#define RZN1_WDT_RETRIGGER_WDSI (0x2 << 14)
#define RZN1_WDT_PRESCALER 16384
#define RZN1_WDT_MAX 4095
struct rzn1_watchdog {
struct watchdog_device wdtdev;
void __iomem *base;
unsigned long clk_rate_khz;
};
static inline uint32_t max_heart_beat_ms(unsigned long clk_rate_khz)
{
return (RZN1_WDT_MAX * RZN1_WDT_PRESCALER) / clk_rate_khz;
}
static inline uint32_t compute_reload_value(uint32_t tick_ms,
unsigned long clk_rate_khz)
{
return (tick_ms * clk_rate_khz) / RZN1_WDT_PRESCALER;
}
static int rzn1_wdt_ping(struct watchdog_device *w)
{
struct rzn1_watchdog *wdt = watchdog_get_drvdata(w);
/* Any value retriggers the watchdog */
writel(0, wdt->base + RZN1_WDT_RETRIGGER);
return 0;
}
static int rzn1_wdt_start(struct watchdog_device *w)
{
struct rzn1_watchdog *wdt = watchdog_get_drvdata(w);
u32 val;
/*
* The hardware allows you to write to this reg only once.
* Since this includes the reload value, there is no way to change the
* timeout once started. Also note that the WDT clock is half the bus
* fabric clock rate, so if the bus fabric clock rate is changed after
* the WDT is started, the WDT interval will be wrong.
*/
val = RZN1_WDT_RETRIGGER_WDSI;
val |= RZN1_WDT_RETRIGGER_ENABLE;
val |= RZN1_WDT_RETRIGGER_PRESCALE;
val |= compute_reload_value(w->max_hw_heartbeat_ms, wdt->clk_rate_khz);
writel(val, wdt->base + RZN1_WDT_RETRIGGER);
return 0;
}
static irqreturn_t rzn1_wdt_irq(int irq, void *_wdt)
{
pr_crit("RZN1 Watchdog. Initiating system reboot\n");
emergency_restart();
return IRQ_HANDLED;
}
static struct watchdog_info rzn1_wdt_info = {
.identity = "RZ/N1 Watchdog",
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
};
static const struct watchdog_ops rzn1_wdt_ops = {
.owner = THIS_MODULE,
.start = rzn1_wdt_start,
.ping = rzn1_wdt_ping,
};
static int rzn1_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rzn1_watchdog *wdt;
struct device_node *np = dev->of_node;
struct clk *clk;
unsigned long clk_rate;
int ret;
int irq;
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
wdt->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
ret = devm_request_irq(dev, irq, rzn1_wdt_irq, 0,
np->name, wdt);
if (ret) {
dev_err(dev, "failed to request irq %d\n", irq);
return ret;
}
clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(clk)) {
dev_err(dev, "failed to get the clock\n");
return PTR_ERR(clk);
}
clk_rate = clk_get_rate(clk);
if (!clk_rate) {
dev_err(dev, "failed to get the clock rate\n");
return -EINVAL;
}
wdt->clk_rate_khz = clk_rate / 1000;
wdt->wdtdev.info = &rzn1_wdt_info;
wdt->wdtdev.ops = &rzn1_wdt_ops;
wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
wdt->wdtdev.parent = dev;
/*
* The period of the watchdog cannot be changed once set
* and is limited to a very short period.
* Configure it for a 1s period once and for all, and
* rely on the heart-beat provided by the watchdog core
* to make this usable by the user-space.
*/
wdt->wdtdev.max_hw_heartbeat_ms = max_heart_beat_ms(wdt->clk_rate_khz);
if (wdt->wdtdev.max_hw_heartbeat_ms > 1000)
wdt->wdtdev.max_hw_heartbeat_ms = 1000;
wdt->wdtdev.timeout = DEFAULT_TIMEOUT;
ret = watchdog_init_timeout(&wdt->wdtdev, 0, dev);
if (ret)
return ret;
watchdog_set_drvdata(&wdt->wdtdev, wdt);
return devm_watchdog_register_device(dev, &wdt->wdtdev);
}
static const struct of_device_id rzn1_wdt_match[] = {
{ .compatible = "renesas,rzn1-wdt" },
{},
};
MODULE_DEVICE_TABLE(of, rzn1_wdt_match);
static struct platform_driver rzn1_wdt_driver = {
.probe = rzn1_wdt_probe,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = rzn1_wdt_match,
},
};
module_platform_driver(rzn1_wdt_driver);
MODULE_DESCRIPTION("Renesas RZ/N1 hardware watchdog");
MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
MODULE_LICENSE("GPL");
|
