diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2013-06-20 02:14:59 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2013-06-20 02:15:45 +0200 |
| commit | e5051b8472c2fde91e44d906c9a2e516a10b60b2 (patch) | |
| tree | b7c27378ca981a7bcf86639db7b0cde834feb0b6 /drivers/net/ethernet/renesas/sh_eth.c | |
| parent | c3b693d1d63444afe4fbf809d8a311b63741e503 (diff) | |
| parent | 3bfbc6cd9b41f937a134ba65a4a1eefba062b9a8 (diff) | |
Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo:
imx soc changes for 3.11:
* New SoCs i.MX6 Sololite and Vybrid VF610 support
* imx5 and imx6 clock fixes and additions
* Update clock driver to use of_clk_init() function
* Refactor restart routine mxc_restart() to get it work for DT boot
as well
* Clean up mxc specific ulpi access ops
* imx defconfig updates
* tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (29 commits)
ARM: imx_v6_v7_defconfig: Enable Vybrid VF610
ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default
ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd
ARM: imx_v6_v7_defconfig: Enable PWM and backlight options
ARM: imx: Remove mxc specific ulpi access ops
ARM: imx: add initial support for VF610
ARM: imx: add VF610 clock support
ARM: imx_v6_v7_defconfig: enable parallel display
ARM: imx: clk: No need to initialize phandle struct
ARM: imx: irq-common: Include header to avoid sparse warning
ARM: imx: Enable mx6 solo-lite support
ARM: imx6: use common of_clk_init() call to initialize clocks
ARM: imx6q: call of_clk_init() to register fixed rate clocks
ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE
ARM: i.MX6: clk: add different DualLite MLB clock config
ARM i.MX5: Add S/PDIF clocks
ARM i.MX53: Add SATA clock
ARM: imx6q: clk: add the eim_slow clock
ARM: imx: remove MLB PLL from pllv3
ARM: imx: disable pll8_mlb in mx6q_clks
...
Conflicts:
arch/arm/Kconfig.debug (simple add/add conflict)
Includes an update to 3.10-rc6
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/net/ethernet/renesas/sh_eth.c')
| -rw-r--r-- | drivers/net/ethernet/renesas/sh_eth.c | 19 |
1 files changed, 13 insertions, 6 deletions
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 42e9dd05c936..5e3982fc5398 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev) mdelay(1); cnt--; } - if (cnt < 0) { - pr_err("Device reset fail\n"); + if (cnt <= 0) { + pr_err("Device reset failed\n"); ret = -ETIMEDOUT; } return ret; @@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status) desc_status = edmac_to_cpu(mdp, rxdesc->status); pkt_len = rxdesc->frame_length; -#if defined(CONFIG_ARCH_R8A7740) - desc_status >>= 16; -#endif - if (--boguscnt < 0) break; if (!(desc_status & RDFEND)) ndev->stats.rx_length_errors++; +#if defined(CONFIG_ARCH_R8A7740) + /* + * In case of almost all GETHER/ETHERs, the Receive Frame State + * (RFS) bits in the Receive Descriptor 0 are from bit 9 to + * bit 0. However, in case of the R8A7740's GETHER, the RFS + * bits are from bit 25 to bit 16. So, the driver needs right + * shifting by 16. + */ + desc_status >>= 16; +#endif + if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 | RD_RFS5 | RD_RFS6 | RD_RFS10)) { ndev->stats.rx_errors++; |