diff options
Diffstat (limited to 'arch/x86/entry')
-rw-r--r-- | arch/x86/entry/calling.h | 34 | ||||
-rw-r--r-- | arch/x86/entry/entry_32.S | 3 | ||||
-rw-r--r-- | arch/x86/entry/entry_64.S | 153 | ||||
-rw-r--r-- | arch/x86/entry/entry_64_compat.S | 71 |
4 files changed, 154 insertions, 107 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h index dce7092ab24a..be63330c5511 100644 --- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -97,7 +97,7 @@ For 32-bit we have the following conventions - kernel is built with #define SIZEOF_PTREGS 21*8 -.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax +.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax save_ret=0 /* * Push registers and sanitize registers of values that a * speculation attack might otherwise want to exploit. The @@ -105,32 +105,41 @@ For 32-bit we have the following conventions - kernel is built with * could be put to use in a speculative execution gadget. * Interleave XOR with PUSH for better uop scheduling: */ + .if \save_ret + pushq %rsi /* pt_regs->si */ + movq 8(%rsp), %rsi /* temporarily store the return address in %rsi */ + movq %rdi, 8(%rsp) /* pt_regs->di (overwriting original return address) */ + .else pushq %rdi /* pt_regs->di */ pushq %rsi /* pt_regs->si */ + .endif pushq \rdx /* pt_regs->dx */ pushq %rcx /* pt_regs->cx */ pushq \rax /* pt_regs->ax */ pushq %r8 /* pt_regs->r8 */ - xorq %r8, %r8 /* nospec r8 */ + xorl %r8d, %r8d /* nospec r8 */ pushq %r9 /* pt_regs->r9 */ - xorq %r9, %r9 /* nospec r9 */ + xorl %r9d, %r9d /* nospec r9 */ pushq %r10 /* pt_regs->r10 */ - xorq %r10, %r10 /* nospec r10 */ + xorl %r10d, %r10d /* nospec r10 */ pushq %r11 /* pt_regs->r11 */ - xorq %r11, %r11 /* nospec r11*/ + xorl %r11d, %r11d /* nospec r11*/ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx*/ pushq %rbp /* pt_regs->rbp */ xorl %ebp, %ebp /* nospec rbp*/ pushq %r12 /* pt_regs->r12 */ - xorq %r12, %r12 /* nospec r12*/ + xorl %r12d, %r12d /* nospec r12*/ pushq %r13 /* pt_regs->r13 */ - xorq %r13, %r13 /* nospec r13*/ + xorl %r13d, %r13d /* nospec r13*/ pushq %r14 /* pt_regs->r14 */ - xorq %r14, %r14 /* nospec r14*/ + xorl %r14d, %r14d /* nospec r14*/ pushq %r15 /* pt_regs->r15 */ - xorq %r15, %r15 /* nospec r15*/ + xorl %r15d, %r15d /* nospec r15*/ UNWIND_HINT_REGS + .if \save_ret + pushq %rsi /* return address on top of stack */ + .endif .endm .macro POP_REGS pop_rdi=1 skip_r11rcx=0 @@ -172,12 +181,7 @@ For 32-bit we have the following conventions - kernel is built with */ .macro ENCODE_FRAME_POINTER ptregs_offset=0 #ifdef CONFIG_FRAME_POINTER - .if \ptregs_offset - leaq \ptregs_offset(%rsp), %rbp - .else - mov %rsp, %rbp - .endif - orq $0x1, %rbp + leaq 1+\ptregs_offset(%rsp), %rbp #endif .endm diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 16c2c022540d..6ad064c8cf35 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -252,8 +252,7 @@ ENTRY(__switch_to_asm) * exist, overwrite the RSB with entries which capture * speculative execution to prevent attack. */ - /* Clobbers %ebx */ - FILL_RETURN_BUFFER RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW + FILL_RETURN_BUFFER %ebx, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW #endif /* restore callee-saved registers */ diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 8971bd64d515..d5c7f18f79ac 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -364,8 +364,7 @@ ENTRY(__switch_to_asm) * exist, overwrite the RSB with entries which capture * speculative execution to prevent attack. */ - /* Clobbers %rbx */ - FILL_RETURN_BUFFER RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW + FILL_RETURN_BUFFER %r12, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW #endif /* restore callee-saved registers */ @@ -449,9 +448,19 @@ END(irq_entries_start) * * The invariant is that, if irq_count != -1, then the IRQ stack is in use. */ -.macro ENTER_IRQ_STACK regs=1 old_rsp +.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0 DEBUG_ENTRY_ASSERT_IRQS_OFF + + .if \save_ret + /* + * If save_ret is set, the original stack contains one additional + * entry -- the return address. Therefore, move the address one + * entry below %rsp to \old_rsp. + */ + leaq 8(%rsp), \old_rsp + .else movq %rsp, \old_rsp + .endif .if \regs UNWIND_HINT_REGS base=\old_rsp @@ -497,6 +506,15 @@ END(irq_entries_start) .if \regs UNWIND_HINT_REGS indirect=1 .endif + + .if \save_ret + /* + * Push the return address to the stack. This return address can + * be found at the "real" original RSP, which was offset by 8 at + * the beginning of this macro. + */ + pushq -8(\old_rsp) + .endif .endm /* @@ -520,27 +538,65 @@ END(irq_entries_start) .endm /* - * Interrupt entry/exit. - * - * Interrupt entry points save only callee clobbered registers in fast path. + * Interrupt entry helper function. * - * Entry runs with interrupts off. + * Entry runs with interrupts off. Stack layout at entry: + * +----------------------------------------------------+ + * | regs->ss | + * | regs->rsp | + * | regs->eflags | + * | regs->cs | + * | regs->ip | + * +----------------------------------------------------+ + * | regs->orig_ax = ~(interrupt number) | + * +----------------------------------------------------+ + * | return address | + * +----------------------------------------------------+ */ - -/* 0(%rsp): ~(interrupt number) */ - .macro interrupt func +ENTRY(interrupt_entry) + UNWIND_HINT_FUNC + ASM_CLAC cld - testb $3, CS-ORIG_RAX(%rsp) + testb $3, CS-ORIG_RAX+8(%rsp) jz 1f SWAPGS - call switch_to_thread_stack + + /* + * Switch to the thread stack. The IRET frame and orig_ax are + * on the stack, as well as the return address. RDI..R12 are + * not (yet) on the stack and space has not (yet) been + * allocated for them. + */ + pushq %rdi + + /* Need to switch before accessing the thread stack. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + + /* + * We have RDI, return address, and orig_ax on the stack on + * top of the IRET frame. That means offset=24 + */ + UNWIND_HINT_IRET_REGS base=%rdi offset=24 + + pushq 7*8(%rdi) /* regs->ss */ + pushq 6*8(%rdi) /* regs->rsp */ + pushq 5*8(%rdi) /* regs->eflags */ + pushq 4*8(%rdi) /* regs->cs */ + pushq 3*8(%rdi) /* regs->ip */ + pushq 2*8(%rdi) /* regs->orig_ax */ + pushq 8(%rdi) /* return address */ + UNWIND_HINT_FUNC + + movq (%rdi), %rdi 1: - PUSH_AND_CLEAR_REGS - ENCODE_FRAME_POINTER + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 - testb $3, CS(%rsp) + testb $3, CS+8(%rsp) jz 1f /* @@ -548,7 +604,7 @@ END(irq_entries_start) * * We need to tell lockdep that IRQs are off. We can't do this until * we fix gsbase, and we should do it before enter_from_user_mode - * (which can take locks). Since TRACE_IRQS_OFF idempotent, + * (which can take locks). Since TRACE_IRQS_OFF is idempotent, * the simplest way to handle it is to just call it twice if * we enter from user mode. There's no reason to optimize this since * TRACE_IRQS_OFF is a no-op if lockdep is off. @@ -558,12 +614,15 @@ END(irq_entries_start) CALL_enter_from_user_mode 1: - ENTER_IRQ_STACK old_rsp=%rdi + ENTER_IRQ_STACK old_rsp=%rdi save_ret=1 /* We entered an interrupt context - irqs are off: */ TRACE_IRQS_OFF - call \func /* rdi points to pt_regs */ - .endm + ret +END(interrupt_entry) + + +/* Interrupt entry/exit. */ /* * The interrupt stubs push (~vector+0x80) onto the stack and @@ -571,9 +630,10 @@ END(irq_entries_start) */ .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: - ASM_CLAC addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ - interrupt do_IRQ + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call do_IRQ /* rdi points to pt_regs */ /* 0(%rsp): old RSP */ ret_from_intr: DISABLE_INTERRUPTS(CLBR_ANY) @@ -766,10 +826,11 @@ END(common_interrupt) .macro apicinterrupt3 num sym do_sym ENTRY(\sym) UNWIND_HINT_IRET_REGS - ASM_CLAC pushq $~(\num) .Lcommon_\sym: - interrupt \do_sym + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call \do_sym /* rdi points to pt_regs */ jmp ret_from_intr END(\sym) .endm @@ -832,34 +893,6 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt */ #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8) -/* - * Switch to the thread stack. This is called with the IRET frame and - * orig_ax on the stack. (That is, RDI..R12 are not on the stack and - * space has not been allocated for them.) - */ -ENTRY(switch_to_thread_stack) - UNWIND_HINT_FUNC - - pushq %rdi - /* Need to switch before accessing the thread stack. */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi - movq %rsp, %rdi - movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp - UNWIND_HINT sp_offset=16 sp_reg=ORC_REG_DI - - pushq 7*8(%rdi) /* regs->ss */ - pushq 6*8(%rdi) /* regs->rsp */ - pushq 5*8(%rdi) /* regs->eflags */ - pushq 4*8(%rdi) /* regs->cs */ - pushq 3*8(%rdi) /* regs->ip */ - pushq 2*8(%rdi) /* regs->orig_ax */ - pushq 8(%rdi) /* return address */ - UNWIND_HINT_FUNC - - movq (%rdi), %rdi - ret -END(switch_to_thread_stack) - .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ENTRY(\sym) UNWIND_HINT_IRET_REGS offset=\has_error_code*8 @@ -875,12 +908,8 @@ ENTRY(\sym) pushq $-1 /* ORIG_RAX: no syscall to restart */ .endif - /* Save all registers in pt_regs */ - PUSH_AND_CLEAR_REGS - ENCODE_FRAME_POINTER - .if \paranoid < 2 - testb $3, CS(%rsp) /* If coming from userspace, switch stacks */ + testb $3, CS-ORIG_RAX(%rsp) /* If coming from userspace, switch stacks */ jnz .Lfrom_usermode_switch_stack_\@ .endif @@ -1130,13 +1159,15 @@ idtentry machine_check do_mce has_error_code=0 paranoid=1 #endif /* - * Switch gs if needed. + * Save all registers in pt_regs, and switch gs if needed. * Use slow, but surefire "are we in kernel?" check. * Return: ebx=0: need swapgs on exit, ebx=1: otherwise */ ENTRY(paranoid_entry) UNWIND_HINT_FUNC cld + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 movl $1, %ebx movl $MSR_GS_BASE, %ecx rdmsr @@ -1181,12 +1212,14 @@ ENTRY(paranoid_exit) END(paranoid_exit) /* - * Switch gs if needed. + * Save all registers in pt_regs, and switch GS if needed. * Return: EBX=0: came from user mode; EBX=1: otherwise */ ENTRY(error_entry) - UNWIND_HINT_REGS offset=8 + UNWIND_HINT_FUNC cld + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 testb $3, CS+8(%rsp) jz .Lerror_kernelspace @@ -1577,8 +1610,6 @@ end_repeat_nmi: * frame to point back to repeat_nmi. */ pushq $-1 /* ORIG_RAX: no syscall to restart */ - PUSH_AND_CLEAR_REGS - ENCODE_FRAME_POINTER /* * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index fd65e016e413..e811dd9c5e99 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -85,25 +85,25 @@ ENTRY(entry_SYSENTER_compat) pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ pushq $0 /* pt_regs->r8 = 0 */ - xorq %r8, %r8 /* nospec r8 */ + xorl %r8d, %r8d /* nospec r8 */ pushq $0 /* pt_regs->r9 = 0 */ - xorq %r9, %r9 /* nospec r9 */ + xorl %r9d, %r9d /* nospec r9 */ pushq $0 /* pt_regs->r10 = 0 */ - xorq %r10, %r10 /* nospec r10 */ + xorl %r10d, %r10d /* nospec r10 */ pushq $0 /* pt_regs->r11 = 0 */ - xorq %r11, %r11 /* nospec r11 */ + xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ pushq %rbp /* pt_regs->rbp (will be overwritten) */ xorl %ebp, %ebp /* nospec rbp */ pushq $0 /* pt_regs->r12 = 0 */ - xorq %r12, %r12 /* nospec r12 */ + xorl %r12d, %r12d /* nospec r12 */ pushq $0 /* pt_regs->r13 = 0 */ - xorq %r13, %r13 /* nospec r13 */ + xorl %r13d, %r13d /* nospec r13 */ pushq $0 /* pt_regs->r14 = 0 */ - xorq %r14, %r14 /* nospec r14 */ + xorl %r14d, %r14d /* nospec r14 */ pushq $0 /* pt_regs->r15 = 0 */ - xorq %r15, %r15 /* nospec r15 */ + xorl %r15d, %r15d /* nospec r15 */ cld /* @@ -224,25 +224,25 @@ GLOBAL(entry_SYSCALL_compat_after_hwframe) pushq %rbp /* pt_regs->cx (stashed in bp) */ pushq $-ENOSYS /* pt_regs->ax */ pushq $0 /* pt_regs->r8 = 0 */ - xorq %r8, %r8 /* nospec r8 */ + xorl %r8d, %r8d /* nospec r8 */ pushq $0 /* pt_regs->r9 = 0 */ - xorq %r9, %r9 /* nospec r9 */ + xorl %r9d, %r9d /* nospec r9 */ pushq $0 /* pt_regs->r10 = 0 */ - xorq %r10, %r10 /* nospec r10 */ + xorl %r10d, %r10d /* nospec r10 */ pushq $0 /* pt_regs->r11 = 0 */ - xorq %r11, %r11 /* nospec r11 */ + xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ pushq %rbp /* pt_regs->rbp (will be overwritten) */ xorl %ebp, %ebp /* nospec rbp */ pushq $0 /* pt_regs->r12 = 0 */ - xorq %r12, %r12 /* nospec r12 */ + xorl %r12d, %r12d /* nospec r12 */ pushq $0 /* pt_regs->r13 = 0 */ - xorq %r13, %r13 /* nospec r13 */ + xorl %r13d, %r13d /* nospec r13 */ pushq $0 /* pt_regs->r14 = 0 */ - xorq %r14, %r14 /* nospec r14 */ + xorl %r14d, %r14d /* nospec r14 */ pushq $0 /* pt_regs->r15 = 0 */ - xorq %r15, %r15 /* nospec r15 */ + xorl %r15d, %r15d /* nospec r15 */ /* * User mode is traced as though IRQs are on, and SYSENTER @@ -298,9 +298,9 @@ sysret32_from_system_call: */ SWITCH_TO_USER_CR3_NOSTACK scratch_reg=%r8 scratch_reg2=%r9 - xorq %r8, %r8 - xorq %r9, %r9 - xorq %r10, %r10 + xorl %r8d, %r8d + xorl %r9d, %r9d + xorl %r10d, %r10d swapgs sysretl END(entry_SYSCALL_compat) @@ -347,10 +347,23 @@ ENTRY(entry_INT80_compat) */ movl %eax, %eax + /* switch to thread stack expects orig_ax and rdi to be pushed */ pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + + /* Need to switch before accessing the thread stack. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + + pushq 6*8(%rdi) /* regs->ss */ + pushq 5*8(%rdi) /* regs->rsp */ + pushq 4*8(%rdi) /* regs->eflags */ + pushq 3*8(%rdi) /* regs->cs */ + pushq 2*8(%rdi) /* regs->ip */ + pushq 1*8(%rdi) /* regs->orig_ax */ - /* switch to thread stack expects orig_ax to be pushed */ - call switch_to_thread_stack + movq (%rdi), %rdi /* restore %rdi */ pushq %rdi /* pt_regs->di */ pushq %rsi /* pt_regs->si */ @@ -358,25 +371,25 @@ ENTRY(entry_INT80_compat) pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ pushq $0 /* pt_regs->r8 = 0 */ - xorq %r8, %r8 /* nospec r8 */ + xorl %r8d, %r8d /* nospec r8 */ pushq $0 /* pt_regs->r9 = 0 */ - xorq %r9, %r9 /* nospec r9 */ + xorl %r9d, %r9d /* nospec r9 */ pushq $0 /* pt_regs->r10 = 0 */ - xorq %r10, %r10 /* nospec r10 */ + xorl %r10d, %r10d /* nospec r10 */ pushq $0 /* pt_regs->r11 = 0 */ - xorq %r11, %r11 /* nospec r11 */ + xorl %r11d, %r11d /* nospec r11 */ pushq %rbx /* pt_regs->rbx */ xorl %ebx, %ebx /* nospec rbx */ pushq %rbp /* pt_regs->rbp */ xorl %ebp, %ebp /* nospec rbp */ pushq %r12 /* pt_regs->r12 */ - xorq %r12, %r12 /* nospec r12 */ + xorl %r12d, %r12d /* nospec r12 */ pushq %r13 /* pt_regs->r13 */ - xorq %r13, %r13 /* nospec r13 */ + xorl %r13d, %r13d /* nospec r13 */ pushq %r14 /* pt_regs->r14 */ - xorq %r14, %r14 /* nospec r14 */ + xorl %r14d, %r14d /* nospec r14 */ pushq %r15 /* pt_regs->r15 */ - xorq %r15, %r15 /* nospec r15 */ + xorl %r15d, %r15d /* nospec r15 */ cld /* |